josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

lang - removed unused strings

This commit is contained in:
Robert Pelnar 2018-11-01 14:04:24 +01:00
parent 6a82af487e
commit 635828dfba
7 changed files with 0 additions and 348 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
lang/lang_en.txt
View File

@ -1,6 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
@ -28,9 +25,6 @@
#MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -46,9 +40,6 @@
#MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
@ -97,9 +88,6 @@
#MSG_BED c=0 r=0 #MSG_BED c=0 r=0
"Bed" "Bed"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
@ -199,9 +187,6 @@
#MSG_EJECTING_FILAMENT c=20 r=1 #MSG_EJECTING_FILAMENT c=20 r=1
"Ejecting filament" "Ejecting filament"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
@ -292,12 +277,6 @@
#MSG_FILE_INCOMPLETE c=20 r=2 #MSG_FILE_INCOMPLETE c=20 r=2
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
@ -349,9 +328,6 @@
#MSG_CORRECTLY c=20 r=0 #MSG_CORRECTLY c=20 r=0
"Changed correctly?" "Changed correctly?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
@ -691,9 +667,6 @@
#MSG_REMOVE_OLD_FILAMENT c=20 r=4 #MSG_REMOVE_OLD_FILAMENT c=20 r=4
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
@ -730,9 +703,6 @@
#MSG_SD_INIT_FAIL c=0 r=0 #MSG_SD_INIT_FAIL c=0 r=0
"SD init fail" "SD init fail"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
@ -811,9 +781,6 @@
#MSG_STATISTICS c=0 r=0 #MSG_STATISTICS c=0 r=0
"Statistics " "Statistics "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
@ -910,9 +877,6 @@
#MSG_SD_WORKDIR_FAIL c=0 r=0 #MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed" "workDir open failed"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"

52
lang/lang_en_cz.txt
View File

@ -1,7 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
" [vyp"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
" PlannerBufferBytes: " " PlannerBufferBytes: "
@ -38,10 +34,6 @@
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x00" "\x00"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
"\x00"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
"Dostavovani Z" "Dostavovani Z"
@ -62,10 +54,6 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"Dojely oba Z voziky k~hornimu dorazu?" "Dojely oba Z voziky k~hornimu dorazu?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
"Auto doladit Z ?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
"\x00" "\x00"
@ -130,10 +118,6 @@
"Bed" "Bed"
"\x00" "\x00"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
"\x00"
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
"Stav remenu" "Stav remenu"
@ -266,10 +250,6 @@
"Ejecting filament" "Ejecting filament"
"Vysouvam filament" "Vysouvam filament"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
"\x00"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
"\x00" "\x00"
@ -390,14 +370,6 @@
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
"Soubor nekompletni. Pokracovat?" "Soubor nekompletni. Pokracovat?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
"\x00"
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
"\x00"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
"Dokoncovani pohybu" "Dokoncovani pohybu"
@ -466,10 +438,6 @@
"Changed correctly?" "Changed correctly?"
"Vymena ok?" "Vymena ok?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
"Vymena filamentu!"
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
"Kontrola bed " "Kontrola bed "
@ -922,10 +890,6 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Vyjmete stary filament a stisknete tlacitko pro zavedeni noveho." "Vyjmete stary filament a stisknete tlacitko pro zavedeni noveho."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reset XYZ kalibr." "Reset XYZ kalibr."
@ -974,10 +938,6 @@
"SD init fail" "SD init fail"
"\x00" "\x00"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
"\x00"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Hledam kalibracni bod podlozky" "Hledam kalibracni bod podlozky"
@ -1082,10 +1042,6 @@
"Statistics " "Statistics "
"Statistika " "Statistika "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
"\x00"
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
"Zastavit tisk" "Zastavit tisk"
@ -1210,14 +1166,6 @@
"Wizard" "Wizard"
"\x00" "\x00"
#MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed"
"\x00"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
"\x00"
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"
"Detaily XYZ kal." "Detaily XYZ kal."

52
lang/lang_en_de.txt
View File

@ -1,7 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
" [aus"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
" PlannerPufferBytes: " " PlannerPufferBytes: "
@ -38,10 +34,6 @@
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x1b[2JWARNUNG:\x1b[1;0HCrash Erkennung\x1b[2;0Hdeaktiviert im\x1b[3;0HStealth Modus" "\x1b[2JWARNUNG:\x1b[1;0HCrash Erkennung\x1b[2;0Hdeaktiviert im\x1b[3;0HStealth Modus"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
"\x00"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
"Z wurde eingestellt" "Z wurde eingestellt"
@ -62,10 +54,6 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"Sind linke+rechte Z- Schlitten ganz oben?" "Sind linke+rechte Z- Schlitten ganz oben?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
"Auto Z einstellen?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
"Restemodus [an]" "Restemodus [an]"
@ -130,10 +118,6 @@
"Bed" "Bed"
"Bett" "Bett"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
"Beginn Dateiliste"
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
"Gurtstatus" "Gurtstatus"
@ -266,10 +250,6 @@
"Ejecting filament" "Ejecting filament"
"Werfe Filament aus" "Werfe Filament aus"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
"Ende Dateiliste"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
"Ende nicht getroffen" "Ende nicht getroffen"
@ -390,14 +370,6 @@
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
"Datei unvollstaendig Trotzdem fortfahren?" "Datei unvollstaendig Trotzdem fortfahren?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
"Datei geoeffnet: "
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
"Datei ausgewaehlt"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
"Bewegung beenden" "Bewegung beenden"
@ -466,10 +438,6 @@
"Changed correctly?" "Changed correctly?"
"Wechsel ok?" "Wechsel ok?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
"Filament-Wechsel!"
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
"Pruefe Bett " "Pruefe Bett "
@ -922,10 +890,6 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Entfernen Sie das alte Filament und druecken Sie den Knopf, um das neue zu laden." "Entfernen Sie das alte Filament und druecken Sie den Knopf, um das neue zu laden."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
"Statusbericht Endanschlag"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"XYZ Kalib.zurueck" "XYZ Kalib.zurueck"
@ -974,10 +938,6 @@
"SD init fail" "SD init fail"
"SD Init fehlerhaft" "SD Init fehlerhaft"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
"SD drucke Byte "
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Suche Bett Kalibrierpunkt" "Suche Bett Kalibrierpunkt"
@ -1082,10 +1042,6 @@
"Statistics " "Statistics "
"Statistiken " "Statistiken "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
"Schrittrate zu hoch: "
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
"Druck abbrechen" "Druck abbrechen"
@ -1210,14 +1166,6 @@
"Wizard" "Wizard"
"Assistent" "Assistent"
#MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed"
"Arbeitsverzeichnis oeffnen misslungen"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
"Schreibe in Datei: "
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"
"XYZ Kal. Details" "XYZ Kal. Details"

52
lang/lang_en_es.txt
View File

@ -1,7 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
" [inactivo"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
" PlannerBufferBytes: " " PlannerBufferBytes: "
@ -38,10 +34,6 @@
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x1b[2JATENCION:\x1b[1;0HDec. choque\x1b[2;0Hdesactivada en\x1b[3;0HModo silencio" "\x1b[2JATENCION:\x1b[1;0HDec. choque\x1b[2;0Hdesactivada en\x1b[3;0HModo silencio"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
"\x00"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
"Ajustar Z" "Ajustar Z"
@ -62,10 +54,6 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"Carros Z izq./der. estan arriba maximo?" "Carros Z izq./der. estan arriba maximo?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
"Ajustar Eje Z?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
"Auto despleg.[on]" "Auto despleg.[on]"
@ -130,10 +118,6 @@
"Bed" "Bed"
"Base calefactable" "Base calefactable"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
"Comienzo lista arch."
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
"Estado de la correa" "Estado de la correa"
@ -266,10 +250,6 @@
"Ejecting filament" "Ejecting filament"
"Expulsando filamento" "Expulsando filamento"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
"Fin lista arch."
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
"Endstop no alcanzado" "Endstop no alcanzado"
@ -390,14 +370,6 @@
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
"Archivo incompleto. Continuar de todos modos?" "Archivo incompleto. Continuar de todos modos?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
"Arch. abierto: "
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
"Arch. elegido"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
"Term. movimientos" "Term. movimientos"
@ -466,10 +438,6 @@
"Changed correctly?" "Changed correctly?"
"Cambio correcto?" "Cambio correcto?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
"Cambiando filamento!"
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
"Control base cal. " "Control base cal. "
@ -922,10 +890,6 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento." "Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
"Estado endstop"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"\x00" "\x00"
@ -974,10 +938,6 @@
"SD init fail" "SD init fail"
"Error init SD" "Error init SD"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
"SD byte impresion "
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Buscando punto de calibracion base" "Buscando punto de calibracion base"
@ -1082,10 +1042,6 @@
"Statistics " "Statistics "
"Estadisticas " "Estadisticas "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
"Pasos muy altos: "
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
"Detener impresion" "Detener impresion"
@ -1210,14 +1166,6 @@
"Wizard" "Wizard"
"\x00" "\x00"
#MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed"
"error al abrir workDir"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
"Escribiendo al arch.: "
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"
"Detalles de calibracion XYZ" "Detalles de calibracion XYZ"

52
lang/lang_en_fr.txt
View File

@ -1,7 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
"\x00"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
" PlannerBufferBytes : " " PlannerBufferBytes : "
@ -38,10 +34,6 @@
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x1b[2JATTENTION :\x1b[1;0HDetection de crash\x1b[2;0Hdesactivee en mode\x1b[3;0HFurtif" "\x1b[2JATTENTION :\x1b[1;0HDetection de crash\x1b[2;0Hdesactivee en mode\x1b[3;0HFurtif"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
"\x00"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
"Ajustement de Z" "Ajustement de Z"
@ -62,10 +54,6 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"Chariots Z gauche et droite tout en haut?" "Chariots Z gauche et droite tout en haut?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
"Ajustement Z auto ?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
"Purge auto [on]" "Purge auto [on]"
@ -130,10 +118,6 @@
"Bed" "Bed"
"Lit" "Lit"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
"Debut liste fichiers"
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
"Statut courroie" "Statut courroie"
@ -262,10 +246,6 @@
"Ejecting filament" "Ejecting filament"
"Filament en cours d'ejection" "Filament en cours d'ejection"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
"Fin liste fichiers"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
"Butee non atteinte" "Butee non atteinte"
@ -382,14 +362,6 @@
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
"Fichier incomplet. Continuer qd meme ?" "Fichier incomplet. Continuer qd meme ?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
"Fichier ouvert: "
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
"Fichier selectionne"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
"Mouvements de fin" "Mouvements de fin"
@ -458,10 +430,6 @@
"Changed correctly?" "Changed correctly?"
"Change correctement?" "Change correctement?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
"Changement filament!"
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
"Verification du lit " "Verification du lit "
@ -906,10 +874,6 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau." "Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
"Retour du statut des butees"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reinit. calibr. XYZ" "Reinit. calibr. XYZ"
@ -958,10 +922,6 @@
"SD init fail" "SD init fail"
"Echec init SD" "Echec init SD"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
"Octet d'impression de la SD "
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Recherche du point de calibration du lit" "Recherche du point de calibration du lit"
@ -1062,10 +1022,6 @@
"Statistics " "Statistics "
"Statistiques " "Statistiques "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
"Nombre de pas trop eleve: "
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
"Arreter impression" "Arreter impression"
@ -1182,14 +1138,6 @@
"Wizard" "Wizard"
"Assistant" "Assistant"
#MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed"
"Echec ouverture workDir"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
"Ecriture dans le fichier: "
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"
"Details calib. XYZ" "Details calib. XYZ"

52
lang/lang_en_it.txt
View File

@ -1,7 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
"\x00"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
" PlannerBufferBytes: " " PlannerBufferBytes: "
@ -38,10 +34,6 @@
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x1b[2JATTENZIONE:\x1b[1;0HRilev. impatto\x1b[2;0Hdisattivato in\x1b[3;0HModalita silenziosa" "\x1b[2JATTENZIONE:\x1b[1;0HRilev. impatto\x1b[2;0Hdisattivato in\x1b[3;0HModalita silenziosa"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
"\x00"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
"Compensazione Z" "Compensazione Z"
@ -62,10 +54,6 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"I carrelli Z sin/des sono altezza max?" "I carrelli Z sin/des sono altezza max?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
"Autoregolare Z?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
"Esaurim.auto [on]" "Esaurim.auto [on]"
@ -130,10 +118,6 @@
"Bed" "Bed"
"Letto" "Letto"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
"Inizio lista file"
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
"Stato delle cinghie" "Stato delle cinghie"
@ -266,10 +250,6 @@
"Ejecting filament" "Ejecting filament"
"Espellendo filamento" "Espellendo filamento"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
"Fine lista file"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
"Finecorsa fuori portata" "Finecorsa fuori portata"
@ -390,14 +370,6 @@
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
"File incompleto. Continuare comunque?" "File incompleto. Continuare comunque?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
"File aperto: "
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
"File selezionato"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
"Finalizzando gli spostamenti" "Finalizzando gli spostamenti"
@ -466,10 +438,6 @@
"Changed correctly?" "Changed correctly?"
"Cambiato correttamente?" "Cambiato correttamente?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
"Cambiando filam."
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
"Verifica piano " "Verifica piano "
@ -922,10 +890,6 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Rimuovi il filamento precedente e premi la manopola per caricare il nuovo filamento." "Rimuovi il filamento precedente e premi la manopola per caricare il nuovo filamento."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
"Segnalazione dello stato finecorsa"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reset calibrazione XYZ." "Reset calibrazione XYZ."
@ -974,10 +938,6 @@
"SD init fail" "SD init fail"
"Inizializzazione Memoria SD Fallita" "Inizializzazione Memoria SD Fallita"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
"SD stampa byte "
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Ricerca dei punti di calibrazione del piano" "Ricerca dei punti di calibrazione del piano"
@ -1082,10 +1042,6 @@
"Statistics " "Statistics "
"Statistiche " "Statistiche "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
"Velocita passo troppo alta: "
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
"Arresta stampa" "Arresta stampa"
@ -1210,14 +1166,6 @@
"Wizard" "Wizard"
"\x00" "\x00"
#MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed"
"workDir open fallito"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
"Scrittura su file: "
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"
"XYZ Cal. dettagli" "XYZ Cal. dettagli"

52
lang/lang_en_pl.txt
View File

@ -1,7 +1,3 @@
#MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
" [off"
" [wyl"
#MSG_PLANNER_BUFFER_BYTES c=0 r=0 #MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: " " PlannerBufferBytes: "
" PlannerBufferBytes: " " PlannerBufferBytes: "
@ -38,10 +34,6 @@
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x1b[2JUWAGA:\x1b[1;0HWykrywanie zderzen\x1b[2;0Hwylaczone w\x1b[3;0Htrybie Stealth" "\x1b[2JUWAGA:\x1b[1;0HWykrywanie zderzen\x1b[2;0Hwylaczone w\x1b[3;0Htrybie Stealth"
#MSG_REFRESH c=0 r=0
"\xf8Refresh"
"\x00"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
"Dostrajanie Z" "Dostrajanie Z"
@ -62,10 +54,6 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"Obydwa konce osi dojechaly do gornych ogranicznikow?" "Obydwa konce osi dojechaly do gornych ogranicznikow?"
#MSG_ADJUSTZ c=0 r=0
"Auto adjust Z?"
"Autodostroic Z?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "Auto deplete [on]"
"Wyk. resztek [wl]" "Wyk. resztek [wl]"
@ -130,10 +118,6 @@
"Bed" "Bed"
"Stol" "Stol"
#MSG_BEGIN_FILE_LIST c=0 r=0
"Begin file list"
"Poczatek listy plikowogranicznikow"
#MSG_MENU_BELT_STATUS c=15 r=1 #MSG_MENU_BELT_STATUS c=15 r=1
"Belt status" "Belt status"
"Stan paskow" "Stan paskow"
@ -266,10 +250,6 @@
"Ejecting filament" "Ejecting filament"
"Wysuwanie filamentu" "Wysuwanie filamentu"
#MSG_END_FILE_LIST c=0 r=0
"End file list"
"Koniec listy plikow"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
"Krancowka nie aktyw" "Krancowka nie aktyw"
@ -390,14 +370,6 @@
"File incomplete. Continue anyway?" "File incomplete. Continue anyway?"
"Plik niekompletny. Kontynowac?" "Plik niekompletny. Kontynowac?"
#MSG_SD_FILE_OPENED c=0 r=0
"File opened: "
"Otwarty plik: "
#MSG_SD_FILE_SELECTED c=0 r=0
"File selected"
"Wybrano plik"
#MSG_FINISHING_MOVEMENTS c=20 r=1 #MSG_FINISHING_MOVEMENTS c=20 r=1
"Finishing movements" "Finishing movements"
"Konczenie druku" "Konczenie druku"
@ -466,10 +438,6 @@
"Changed correctly?" "Changed correctly?"
"Wymiana ok?" "Wymiana ok?"
#MSG_CHANGING_FILAMENT c=20 r=0
"Changing filament!"
"Wymiana filamentu!"
#MSG_SELFTEST_CHECK_BED c=20 r=0 #MSG_SELFTEST_CHECK_BED c=20 r=0
"Checking bed " "Checking bed "
"Kontrola stolu " "Kontrola stolu "
@ -922,10 +890,6 @@
"Remove old filament and press the knob to start loading new filament." "Remove old filament and press the knob to start loading new filament."
"Wyciagnij poprzedni filament i nacisnij pokretlo aby zaladowac nowy." "Wyciagnij poprzedni filament i nacisnij pokretlo aby zaladowac nowy."
#MSG_M119_REPORT c=0 r=0
"Reporting endstop status"
"Raportowanie statusu krancowek"
#MSG_CALIBRATE_BED_RESET c=0 r=0 #MSG_CALIBRATE_BED_RESET c=0 r=0
"Reset XYZ calibr." "Reset XYZ calibr."
"Reset kalibr. XYZ" "Reset kalibr. XYZ"
@ -974,10 +938,6 @@
"SD init fail" "SD init fail"
"Inicjalizacja karty SD nieudana" "Inicjalizacja karty SD nieudana"
#MSG_SD_PRINTING_BYTE c=0 r=0
"SD printing byte "
"\x00"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Szukam punktu kalibracyjnego na stole" "Szukam punktu kalibracyjnego na stole"
@ -1082,10 +1042,6 @@
"Statistics " "Statistics "
"Statystyki " "Statystyki "
#MSG_STEPPER_TOO_HIGH c=0 r=0
"Steprate too high: "
"Liczba krokow zbyt wysoka: "
#MSG_STOP_PRINT c=0 r=0 #MSG_STOP_PRINT c=0 r=0
"Stop print" "Stop print"
"Zatrzymac druk" "Zatrzymac druk"
@ -1210,14 +1166,6 @@
"Wizard" "Wizard"
"Asystent" "Asystent"
#MSG_SD_WORKDIR_FAIL c=0 r=0
"workDir open failed"
"blad otwierania workDir"
#MSG_SD_WRITE_TO_FILE c=0 r=0
"Writing to file: "
"Zapis do pliku: "
#MSG_XYZ_DETAILS c=19 r=1 #MSG_XYZ_DETAILS c=19 r=1
"XYZ cal. details" "XYZ cal. details"
"Szczegoly kal. XYZ" "Szczegoly kal. XYZ"