josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #4396 from 3d-gussner/MK3_PFW-1538_M420 

PFW-1538: Add M420
This commit is contained in:
3d-gussner 2023-10-13 14:27:34 +02:00 committed by GitHub
parent 3d7892f678 039202f34b
commit 63b628d722
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 26 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
Firmware/Marlin_main.cpp
View File

@ -3083,6 +3083,16 @@ static void gcode_G80()
mesh_bed_leveling_flag = false; mesh_bed_leveling_flag = false;
} }
// G81_M420 Mesh bed leveling status
static void gcode_G81_M420()
{
if (mbl.active) {
mbl.print();
} else SERIAL_PROTOCOLLNPGM("Mesh bed leveling not active.");
return;
}
//! @brief Calibrate XYZ //! @brief Calibrate XYZ
//! @param onlyZ if true, calibrate only Z axis //! @param onlyZ if true, calibrate only Z axis
//! @param verbosity_level //! @param verbosity_level
@ -3783,7 +3793,7 @@ extern uint8_t st_backlash_y;
//!@n G31 - Dock sled (Z_PROBE_SLED only) //!@n G31 - Dock sled (Z_PROBE_SLED only)
//!@n G32 - Undock sled (Z_PROBE_SLED only) //!@n G32 - Undock sled (Z_PROBE_SLED only)
//!@n G80 - Automatic mesh bed leveling //!@n G80 - Automatic mesh bed leveling
//!@n G81 - Print bed profile //!@n G81 - Mesh bed leveling status
//!@n G90 - Use Absolute Coordinates //!@n G90 - Use Absolute Coordinates
//!@n G91 - Use Relative Coordinates //!@n G91 - Use Relative Coordinates
//!@n G92 - Set current position to coordinates given //!@n G92 - Set current position to coordinates given
@ -3873,6 +3883,7 @@ extern uint8_t st_backlash_y;
//!@n M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters //!@n M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters
//!@n M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder //!@n M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder
//!@n M406 - Turn off Filament Sensor extrusion control //!@n M406 - Turn off Filament Sensor extrusion control
//!@n M420 - Mesh bed leveling status
//!@n M500 - stores parameters in EEPROM //!@n M500 - stores parameters in EEPROM
//!@n M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). //!@n M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
//!@n M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. //!@n M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
@ -4910,14 +4921,10 @@ void process_commands()
### G81 - Mesh bed leveling status <a href="https://reprap.org/wiki/G-code#G81:_Mesh_bed_leveling_status">G81: Mesh bed leveling status</a> ### G81 - Mesh bed leveling status <a href="https://reprap.org/wiki/G-code#G81:_Mesh_bed_leveling_status">G81: Mesh bed leveling status</a>
Prints mesh bed leveling status and bed profile if activated. Prints mesh bed leveling status and bed profile if activated.
*/ */
case 81: case 81: {
if (mbl.active) { gcode_G81_M420();
mbl.print(); }
} break;
else
SERIAL_PROTOCOLLNPGM("Mesh bed leveling not active.");
break;
#if 0 #if 0
/*! /*!
### G82: Single Z probe at current location - Not active <a href="https://reprap.org/wiki/G-code#G82:_Single_Z_probe_at_current_location">G82: Single Z probe at current location</a> ### G82: Single Z probe at current location - Not active <a href="https://reprap.org/wiki/G-code#G82:_Single_Z_probe_at_current_location">G82: Single Z probe at current location</a>
@ -7399,6 +7406,16 @@ Sigma_Exit:
break; break;
#endif #endif
/*!
### M420 - Mesh bed leveling status <a href="https://reprap.org/wiki/G-code#M420:_Mesh_bed_leveling_status">M420: Mesh bed leveling status</a>
Prints mesh bed leveling status and bed profile if activated.
*/
case 420: // M420 Mesh bed leveling status
{
gcode_G81_M420();
}
break;
/*! /*!
### M500 - Store settings in EEPROM <a href="https://reprap.org/wiki/G-code#M500:_Store_parameters_in_non-volatile_storage">M500: Store parameters in non-volatile storage</a> ### M500 - Store settings in EEPROM <a href="https://reprap.org/wiki/G-code#M500:_Store_parameters_in_non-volatile_storage">M500: Store parameters in non-volatile storage</a>
Save current parameters to EEPROM. Save current parameters to EEPROM.