From 6c95d340c11cea67cb2cbed78118b8c7c83fc149 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gu=C3=B0ni=20M=C3=A1r=20Gilbert?= <gudni.m.g@gmail.com>
Date: Fri, 26 May 2023 17:20:05 +0000
Subject: [PATCH] Remove dead code axis_travel_steps_per_sqr_second

---
 Firmware/Marlin_main.cpp | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index e025dd743..ae3f1ee79 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -6705,13 +6705,6 @@ Sigma_Exit:
 		// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
 		reset_acceleration_rates();
 		break;
-    #if 0 // Not used for Sprinter/grbl gen6
-    case 202: // M202
-      for(int8_t i=0; i < NUM_AXIS; i++) {
-        if(code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value() * cs.axis_steps_per_mm[i];
-      }
-      break;
-    #endif
 
     /*!
     ### M203 - Set Max Feedrate <a href="https://reprap.org/wiki/G-code#M203:_Set_maximum_feedrate">M203: Set maximum feedrate</a>