josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'MK2-ALL_IN_ONE' into MK2-FRS

This commit is contained in:
3d-gussner 2017-08-25 11:51:20 +02:00 committed by GitHub
parent 4c3fe205db 98ba66cb4f
commit 72aaeea462
11 changed files with 565 additions and 415 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Configuration.h
View File

@ -257,7 +257,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
//#define DISABLE_MAX_ENDSTOPS
#define DISABLE_MAX_ENDSTOPS
//#define DISABLE_MIN_ENDSTOPS
// Disable max endstops for compatibility with endstop checking routine

7
Firmware/Marlin_main.cpp
View File

@ -5027,7 +5027,7 @@ Sigma_Exit:
{
float temp = 150.0;
int e=0;
int c=5;
int c=8;
if (code_seen('E')) e=code_value();
if (e<0)
temp=70;
@ -5669,7 +5669,6 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
pinMode(E_MUX0_PIN, OUTPUT);
pinMode(E_MUX1_PIN, OUTPUT);
pinMode(E_MUX2_PIN, OUTPUT);
delay(100);
SERIAL_ECHO_START;
@ -5679,25 +5678,21 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
case 1:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, LOW);
WRITE(E_MUX2_PIN, LOW);
break;
case 2:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, HIGH);
WRITE(E_MUX2_PIN, LOW);
break;
case 3:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, HIGH);
WRITE(E_MUX2_PIN, LOW);
break;
default:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, LOW);
WRITE(E_MUX2_PIN, LOW);
break;
}

233
Firmware/language_all.cpp
View File

@ -98,7 +98,7 @@ const char MSG_BABYSTEP_Z_CZ[] PROGMEM = "Doladeni osy Z";
const char MSG_BABYSTEP_Z_IT[] PROGMEM = "Compensazione Z";
const char MSG_BABYSTEP_Z_ES[] PROGMEM = "Micropaso Eje Z";
const char MSG_BABYSTEP_Z_PL[] PROGMEM = "Dostrojenie osy Z";
const char MSG_BABYSTEP_Z_DE[] PROGMEM = "Z einstellen";
const char MSG_BABYSTEP_Z_DE[] PROGMEM = "Live Z einstellen";
const char * const MSG_BABYSTEP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BABYSTEP_Z_EN,
MSG_BABYSTEP_Z_CZ,
@ -113,7 +113,7 @@ const char MSG_BABYSTEP_Z_NOT_SET_CZ[] PROGMEM = "Neni zkalibrovana vzdalenost t
const char MSG_BABYSTEP_Z_NOT_SET_IT[] PROGMEM = "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_ES[] PROGMEM = "Distancia entre la punta de la boquilla y la superficie de la cama no fijada aun. Por favor siga el manual, capitulo First steps, seccion First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_PL[] PROGMEM = "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy.";
const char MSG_BABYSTEP_Z_NOT_SET_DE[] PROGMEM = "Der Abstand zwischen der Spitze der Duese und der Bed ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_DE[] PROGMEM = "Der Abstand zwischen der Spitze der Duese und der Druckoberflaeche / Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, Abschnitt First layer calibration.";
const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BABYSTEP_Z_NOT_SET_EN,
MSG_BABYSTEP_Z_NOT_SET_CZ,
@ -127,13 +127,14 @@ const char MSG_BED_EN[] PROGMEM = "Bed";
const char MSG_BED_IT[] PROGMEM = "Letto";
const char MSG_BED_ES[] PROGMEM = "Base";
const char MSG_BED_PL[] PROGMEM = "Stolik";
const char MSG_BED_DE[] PROGMEM = "Bett";
const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_EN,
MSG_BED_EN,
MSG_BED_IT,
MSG_BED_ES,
MSG_BED_PL,
MSG_BED_EN
MSG_BED_DE
};
const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side[um]";
@ -171,7 +172,7 @@ const char MSG_BED_CORRECTION_MENU_CZ[] PROGMEM = "Korekce podlozky";
const char MSG_BED_CORRECTION_MENU_IT[] PROGMEM = "Correz. liv.letto";
const char MSG_BED_CORRECTION_MENU_ES[] PROGMEM = "Corr. de la cama";
const char MSG_BED_CORRECTION_MENU_PL[] PROGMEM = "Korekta podkladki";
const char MSG_BED_CORRECTION_MENU_DE[] PROGMEM = "Bed level Korrekt";
const char MSG_BED_CORRECTION_MENU_DE[] PROGMEM = "Bett level korrekt";
const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_CORRECTION_MENU_EN,
MSG_BED_CORRECTION_MENU_CZ,
@ -197,7 +198,7 @@ const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_BED_CORRECTION_RESET_EN[] PROGMEM = "Reset";
const char MSG_BED_CORRECTION_RESET_DE[] PROGMEM = "Ruecksetzen";
const char MSG_BED_CORRECTION_RESET_DE[] PROGMEM = "Zuruecksetzen";
const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_CORRECTION_RESET_EN,
MSG_BED_CORRECTION_RESET_EN,
@ -227,7 +228,7 @@ const char MSG_BED_DONE_CZ[] PROGMEM = "Bed OK.";
const char MSG_BED_DONE_IT[] PROGMEM = "Piatto fatto.";
const char MSG_BED_DONE_ES[] PROGMEM = "Base preparada";
const char MSG_BED_DONE_PL[] PROGMEM = "Stolik OK.";
const char MSG_BED_DONE_DE[] PROGMEM = "Bed OK";
const char MSG_BED_DONE_DE[] PROGMEM = "Bett OK";
const char * const MSG_BED_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_DONE_EN,
MSG_BED_DONE_CZ,
@ -242,7 +243,7 @@ const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed";
const char MSG_BED_HEATING_IT[] PROGMEM = "Riscald. letto";
const char MSG_BED_HEATING_ES[] PROGMEM = "Calentando Base";
const char MSG_BED_HEATING_PL[] PROGMEM = "Grzanie stolika..";
const char MSG_BED_HEATING_DE[] PROGMEM = "Bed aufwaermen";
const char MSG_BED_HEATING_DE[] PROGMEM = "Bett aufwaermen";
const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_HEATING_EN,
MSG_BED_HEATING_CZ,
@ -257,7 +258,7 @@ const char MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ[] PROGMEM = "Kalibrace Z selhal
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_IT[] PROGMEM = "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_ES[] PROGMEM = "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_PL[] PROGMEM = "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_DE[] PROGMEM = "Z-Kalibrierung fehlgeschlg. Sensor zu hoch ausgeloest. Warte auf Reset.";
const char MSG_BED_LEVELING_FAILED_POINT_HIGH_DE[] PROGMEM = "Bett-Nivellierung fehlgeschlagen. Sensor wurde zu hoch ausgeloest. Warte auf Reset.";
const char * const MSG_BED_LEVELING_FAILED_POINT_HIGH_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_LEVELING_FAILED_POINT_HIGH_EN,
MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ,
@ -272,7 +273,7 @@ const char MSG_BED_LEVELING_FAILED_POINT_LOW_CZ[] PROGMEM = "Kalibrace Z selhala
const char MSG_BED_LEVELING_FAILED_POINT_LOW_IT[] PROGMEM = "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_ES[] PROGMEM = "Nivelacion fallada. Sensor no funciona. Escombros en Boqui.? Esperando reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_PL[] PROGMEM = "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_DE[] PROGMEM = "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_DE[] PROGMEM = "Bett-Nivellierung fehlgeschlagen. Sensor wurde nicht ausgeloest. Schmutzige Duese? Warte auf Reset.";
const char * const MSG_BED_LEVELING_FAILED_POINT_LOW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_LEVELING_FAILED_POINT_LOW_EN,
MSG_BED_LEVELING_FAILED_POINT_LOW_CZ,
@ -287,7 +288,7 @@ const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ[] PROGMEM = "Kalibrace
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_IT[] PROGMEM = "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_ES[] PROGMEM = "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_PL[] PROGMEM = "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_DE[] PROGMEM = "Z-Kalibrierung fehlgeschlg. Sensor nicht angeschlossen. Warte auf Reset.";
const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_DE[] PROGMEM = "Bett-Nivellierung fehlgeschlagen. Sensor nicht angeschlossen oder Kabel defekt. Warte auf Reset.";
const char * const MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN,
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ,
@ -302,7 +303,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ[] PROGMEM = "K
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punti anteriori non raggiungibili.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delanteros no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ,
@ -317,7 +318,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ[] PROGMEM = "K
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Linker voderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ,
@ -332,7 +333,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ[] PROGMEM = "
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ,
@ -377,7 +378,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ[] PROGMEM = "Kalibra
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_IT[] PROGMEM = "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_ES[] PROGMEM = "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL[] PROGMEM = "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bed-Kalibrierpunkt nicht gefunden.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN,
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ,
@ -392,7 +393,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_IT[] PROGMEM = "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_ES[] PROGMEM = "Calibracion XYZ correcta. La inclinacion se corregira automaticamente.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_PL[] PROGMEM = "Kalibracja XYZ prawidlowa. Skosy beda automatycznie wyrownane przy druku.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_DE[] PROGMEM = "XYZ Kalibrierung in Ordnung. Schiefheit wird automatisch korrigiert.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_DE[] PROGMEM = "XYZ-Kalibrierung ok. X/Y-Achsen sind sehr schief. Schiefheit wird automatisch korrigiert.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN,
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ,
@ -407,7 +408,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ[] PROGMEM = "Kalibrace XYZ
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_IT[] PROGMEM = "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_ES[] PROGMEM = "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_PL[] PROGMEM = "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_DE[] PROGMEM = "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_DE[] PROGMEM = "XYZ-Kalibrierung ok. X/Y-Achsen sind etwas schief. Schiefheit wird automatisch korrigiert. Gut gemacht!";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN,
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ,
@ -422,7 +423,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ[] PROGMEM = "
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delanteros no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ,
@ -437,7 +438,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ[] PROGMEM = "
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ,
@ -452,7 +453,7 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ[] PROGMEM =
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit vorne.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt nicht erreichbar.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN,
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ,
@ -520,7 +521,7 @@ const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
const char MSG_CALIBRATE_PINDA_IT[] PROGMEM = "Calibrare";
const char MSG_CALIBRATE_PINDA_ES[] PROGMEM = "Calibrar";
const char MSG_CALIBRATE_PINDA_PL[] PROGMEM = "Skalibrowac";
const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "Kalibrieren";
const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "PINDA Temp. Kal.";
const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CALIBRATE_PINDA_EN,
MSG_CALIBRATE_PINDA_CZ,
@ -535,7 +536,7 @@ const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplot. kalibrace";
const char MSG_CALIBRATION_PINDA_MENU_IT[] PROGMEM = "Taratura temp.";
const char MSG_CALIBRATION_PINDA_MENU_ES[] PROGMEM = "Calibracion temp.";
const char MSG_CALIBRATION_PINDA_MENU_PL[] PROGMEM = "Cieplna kalibr.";
const char MSG_CALIBRATION_PINDA_MENU_DE[] PROGMEM = "Temp. kalibrieren";
const char MSG_CALIBRATION_PINDA_MENU_DE[] PROGMEM = "PINDA Temp. Kal.";
const char * const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CALIBRATION_PINDA_MENU_EN,
MSG_CALIBRATION_PINDA_MENU_CZ,
@ -595,7 +596,7 @@ const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!";
const char MSG_CHANGE_SUCCESS_IT[] PROGMEM = "Cambio riuscito!";
const char MSG_CHANGE_SUCCESS_ES[] PROGMEM = "Cambio correcto";
const char MSG_CHANGE_SUCCESS_PL[] PROGMEM = "Wymiana ok!";
const char MSG_CHANGE_SUCCESS_DE[] PROGMEM = "Wechsel erfolgr.!";
const char MSG_CHANGE_SUCCESS_DE[] PROGMEM = "Wechsel erfolgreich!";
const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CHANGE_SUCCESS_EN,
MSG_CHANGE_SUCCESS_CZ,
@ -665,7 +666,7 @@ const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ[] PROGMEM = "Dojely oba Z voziky k
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_IT[] PROGMEM = "I carrelli Z sin/des sono altezza max?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_ES[] PROGMEM = "Carros Z izq./der. estan arriba maximo?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_PL[] PROGMEM = "Oba wozki dojechaly do gornej ramy?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_DE[] PROGMEM = "Ist der Schlitten ganz oben?";
const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_DE[] PROGMEM = "Sind beide Z Schlitten ganz oben?";
const char * const MSG_CONFIRM_CARRIAGE_AT_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN,
MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ,
@ -680,7 +681,7 @@ const char MSG_CONFIRM_NOZZLE_CLEAN_CZ[] PROGMEM = "Pro uspesnou kalibraci ocist
const char MSG_CONFIRM_NOZZLE_CLEAN_IT[] PROGMEM = "Pulire l'ugello per la calibrazione, poi fare click.";
const char MSG_CONFIRM_NOZZLE_CLEAN_ES[] PROGMEM = "Limpiar boquilla para calibracion. Click cuando acabes.";
const char MSG_CONFIRM_NOZZLE_CLEAN_PL[] PROGMEM = "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_DE[] PROGMEM = "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber.";
const char MSG_CONFIRM_NOZZLE_CLEAN_DE[] PROGMEM = "Bitte reinigen Sie die Duese vor Kalibrierung. Klicken wenn sauber.";
const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CONFIRM_NOZZLE_CLEAN_EN,
MSG_CONFIRM_NOZZLE_CLEAN_CZ,
@ -695,7 +696,7 @@ const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ[] PROGMEM = "Filamenty jsou srovn
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_IT[] PROGMEM = "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_ES[] PROGMEM = "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_PL[] PROGMEM = "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE[] PROGMEM = "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE[] PROGMEM = "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn sauber.";
const char * const MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN,
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ,
@ -765,7 +766,7 @@ const char MSG_DATE_CZ[] PROGMEM = "Datum:";
const char MSG_DATE_IT[] PROGMEM = "Data";
const char MSG_DATE_ES[] PROGMEM = "Fecha:";
const char MSG_DATE_PL[] PROGMEM = "Data:";
const char MSG_DATE_DE[] PROGMEM = "Datum";
const char MSG_DATE_DE[] PROGMEM = "Datum:";
const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DATE_EN,
MSG_DATE_CZ,
@ -776,8 +777,14 @@ const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_DEFAULT_SETTINGS_LOADED_EN[] PROGMEM = "Default settings loaded";
const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[1] PROGMEM = {
MSG_DEFAULT_SETTINGS_LOADED_EN
const char MSG_DEFAULT_SETTINGS_LOADED_DE[] PROGMEM = "Standardeinstellungen geladen";
const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_EN,
MSG_DEFAULT_SETTINGS_LOADED_DE
};
const char MSG_DISABLE_STEPPERS_EN[] PROGMEM = "Disable steppers";
@ -798,7 +805,7 @@ const char * const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_DWELL_EN[] PROGMEM = "Sleep...";
const char MSG_DWELL_IT[] PROGMEM = "Sospensione...";
const char MSG_DWELL_ES[] PROGMEM = "En espera";
const char MSG_DWELL_DE[] PROGMEM = "Einen Moment bitte.";
const char MSG_DWELL_DE[] PROGMEM = "Warten...";
const char * const MSG_DWELL_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DWELL_EN,
MSG_DWELL_EN,
@ -1132,7 +1139,7 @@ const char MSG_FIL_ADJUSTING_CZ[] PROGMEM = "Probiha srovnani filamentu. Prosim
const char MSG_FIL_ADJUSTING_IT[] PROGMEM = "Filamento in fase di regolazione. Attendere prego.";
const char MSG_FIL_ADJUSTING_ES[] PROGMEM = "Ajustando filamentos. Esperar por favor.";
const char MSG_FIL_ADJUSTING_PL[] PROGMEM = "Przebiega wyrownanie filamentow. Prosze czekac.";
const char MSG_FIL_ADJUSTING_DE[] PROGMEM = "Filament positionieren. Bitte warten.";
const char MSG_FIL_ADJUSTING_DE[] PROGMEM = "Einstellen Filament. Bitte warten.";
const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FIL_ADJUSTING_EN,
MSG_FIL_ADJUSTING_CZ,
@ -1172,13 +1179,14 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ[] PROGMEM = "Iterace ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_IT[] PROGMEM = "Reiterazione ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES[] PROGMEM = "Reiteracion ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_PL[] PROGMEM = "Iteracja ";
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE[] PROGMEM = "Wiederholung ";
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_IT,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_PL,
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE
};
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Searching bed calibration point";
@ -1186,7 +1194,7 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Hledam kalibracni
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Ricerca del letto punto di calibraz.";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Buscando cama punto de calibracion";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Szukam punktu kalibracyjnego podkladki";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Suchen Bed Kalibrierpunkt";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Suche Bett Kalibrierpunkt";
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN,
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ,
@ -1216,7 +1224,7 @@ const char MSG_FINISHING_MOVEMENTS_CZ[] PROGMEM = "Dokoncovani pohybu";
const char MSG_FINISHING_MOVEMENTS_IT[] PROGMEM = "Arresto in corso";
const char MSG_FINISHING_MOVEMENTS_ES[] PROGMEM = "Term. movimientos";
const char MSG_FINISHING_MOVEMENTS_PL[] PROGMEM = "Konczenie druku";
const char MSG_FINISHING_MOVEMENTS_DE[] PROGMEM = "Bewegung beenden";
const char MSG_FINISHING_MOVEMENTS_DE[] PROGMEM = "Bewegungen beenden";
const char * const MSG_FINISHING_MOVEMENTS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_FINISHING_MOVEMENTS_EN,
MSG_FINISHING_MOVEMENTS_CZ,
@ -1361,7 +1369,7 @@ const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Zlepsuji presno
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Perfezion. il letto punto di calibraz.";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Mejorando cama punto de calibracion";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Poprawiam precyzyjnosc punktu kalibracyjnego";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Verbesserung Bed Kalibrierpunkt";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Genauigkeit verbessern bei Kalibrierpunkt";
const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN,
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ,
@ -1489,7 +1497,7 @@ const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu";
const char MSG_LOADING_FILAMENT_IT[] PROGMEM = "Caricando filam.";
const char MSG_LOADING_FILAMENT_ES[] PROGMEM = "Introduciendo filam.";
const char MSG_LOADING_FILAMENT_PL[] PROGMEM = "Wprow. filamentu";
const char MSG_LOADING_FILAMENT_DE[] PROGMEM = "Filament leadt";
const char MSG_LOADING_FILAMENT_DE[] PROGMEM = "Filament laedt";
const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_LOADING_FILAMENT_EN,
MSG_LOADING_FILAMENT_CZ,
@ -1599,7 +1607,7 @@ const char MSG_LOOSE_PULLEY_CZ[] PROGMEM = "Uvolnena remenicka";
const char MSG_LOOSE_PULLEY_IT[] PROGMEM = "Puleggia lenta";
const char MSG_LOOSE_PULLEY_ES[] PROGMEM = "Polea suelta";
const char MSG_LOOSE_PULLEY_PL[] PROGMEM = "Kolo pasowe";
const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Lose Riemenscheibe";
const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Loser pulley";
const char * const MSG_LOOSE_PULLEY_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_LOOSE_PULLEY_EN,
MSG_LOOSE_PULLEY_CZ,
@ -1689,7 +1697,7 @@ const char MSG_MEASURED_SKEW_CZ[] PROGMEM = "Merene zkoseni:";
const char MSG_MEASURED_SKEW_IT[] PROGMEM = "Incl. misurata:";
const char MSG_MEASURED_SKEW_ES[] PROGMEM = "Inclin. medida:";
const char MSG_MEASURED_SKEW_PL[] PROGMEM = "Zmier. sciecie:";
const char MSG_MEASURED_SKEW_DE[] PROGMEM = "Schraeglauf:";
const char MSG_MEASURED_SKEW_DE[] PROGMEM = "Symmetrie:";
const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MEASURED_SKEW_EN,
MSG_MEASURED_SKEW_CZ,
@ -1785,7 +1793,7 @@ const char MSG_MOVE_AXIS_CZ[] PROGMEM = "Posunout osu";
const char MSG_MOVE_AXIS_IT[] PROGMEM = "Muovi asse";
const char MSG_MOVE_AXIS_ES[] PROGMEM = "Mover ejes";
const char MSG_MOVE_AXIS_PL[] PROGMEM = "Ruch osi";
const char MSG_MOVE_AXIS_DE[] PROGMEM = "Achsbewegung";
const char MSG_MOVE_AXIS_DE[] PROGMEM = "Bewege Achse";
const char * const MSG_MOVE_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MOVE_AXIS_EN,
MSG_MOVE_AXIS_CZ,
@ -1800,7 +1808,7 @@ const char MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ[] PROGMEM = "Kalibrace XYZ. Otacenim
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_IT[] PROGMEM = "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_ES[] PROGMEM = "Calibrando XYZ. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_PL[] PROGMEM = "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_DE[] PROGMEM = "Kalibrieren von XYZ. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_DE[] PROGMEM = "Kalibrieren von XYZ. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind.";
const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MOVE_CARRIAGE_TO_THE_TOP_EN,
MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ,
@ -1815,7 +1823,7 @@ const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ[] PROGMEM = "Kalibrace Z. Otacenim
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_IT[] PROGMEM = "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_ES[] PROGMEM = "Calibrando Z. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_PL[] PROGMEM = "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE[] PROGMEM = "Kalibrieren von Z. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE[] PROGMEM = "Kalibrieren von Z. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind.";
const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN,
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ,
@ -1930,7 +1938,7 @@ const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista";
const char MSG_NOT_COLOR_IT[] PROGMEM = "Colore non puro";
const char MSG_NOT_COLOR_ES[] PROGMEM = "Color no homogeneo";
const char MSG_NOT_COLOR_PL[] PROGMEM = "Kolor zanieczysz.";
const char MSG_NOT_COLOR_DE[] PROGMEM = "Farbe unklar";
const char MSG_NOT_COLOR_DE[] PROGMEM = "Farbe nicht klar.";
const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_NOT_COLOR_EN,
MSG_NOT_COLOR_CZ,
@ -2028,7 +2036,7 @@ const char MSG_PAPER_CZ[] PROGMEM = "Umistete list papiru na podlozku a udrzujte
const char MSG_PAPER_IT[] PROGMEM = "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante.";
const char MSG_PAPER_ES[] PROGMEM = "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente.";
const char MSG_PAPER_PL[] PROGMEM = "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke.";
const char MSG_PAPER_DE[] PROGMEM = "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einklemmt, Drucker sofort ausschalten";
const char MSG_PAPER_DE[] PROGMEM = "Lege waehrend der Kalibrierung der ersten 4 Punkte ein Blatt Papier unter die Duese. Wenn die Duese das Papier bewegt, Drucker sofort ausschalten!";
const char * const MSG_PAPER_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PAPER_EN,
MSG_PAPER_CZ,
@ -2043,7 +2051,7 @@ const char MSG_PAUSE_PRINT_CZ[] PROGMEM = "Pozastavit tisk";
const char MSG_PAUSE_PRINT_IT[] PROGMEM = "Metti in pausa";
const char MSG_PAUSE_PRINT_ES[] PROGMEM = "Pausar impresion";
const char MSG_PAUSE_PRINT_PL[] PROGMEM = "Przerwac druk";
const char MSG_PAUSE_PRINT_DE[] PROGMEM = "Druck unterbrech.";
const char MSG_PAUSE_PRINT_DE[] PROGMEM = "Pause";
const char * const MSG_PAUSE_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PAUSE_PRINT_EN,
MSG_PAUSE_PRINT_CZ,
@ -2057,7 +2065,7 @@ const char MSG_PICK_Z_EN[] PROGMEM = "Pick print";
const char MSG_PICK_Z_CZ[] PROGMEM = "Vyberte vytisk";
const char MSG_PICK_Z_ES[] PROGMEM = "Esc. Modelo Adecuado";
const char MSG_PICK_Z_PL[] PROGMEM = "Vyberte vytisk";
const char MSG_PICK_Z_DE[] PROGMEM = "Waehle Abdruck";
const char MSG_PICK_Z_DE[] PROGMEM = "Waehle Druck";
const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PICK_Z_EN,
MSG_PICK_Z_CZ,
@ -2067,6 +2075,39 @@ const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PICK_Z_DE
};
const char MSG_PID_BED_EN[] PROGMEM = "PID bed cal. ";
const char MSG_PID_BED_DE[] PROGMEM = "PID Bett Kalibrier. ";
const char * const MSG_PID_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_BED_EN,
MSG_PID_BED_EN,
MSG_PID_BED_EN,
MSG_PID_BED_EN,
MSG_PID_BED_EN,
MSG_PID_BED_DE
};
const char MSG_PID_BED_FINISHED_EN[] PROGMEM = "PID bed cal. done ";
const char MSG_PID_BED_FINISHED_DE[] PROGMEM = "PID Bett Kal. fertig";
const char * const MSG_PID_BED_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_BED_FINISHED_EN,
MSG_PID_BED_FINISHED_EN,
MSG_PID_BED_FINISHED_EN,
MSG_PID_BED_FINISHED_EN,
MSG_PID_BED_FINISHED_EN,
MSG_PID_BED_FINISHED_DE
};
const char MSG_PID_BED_RUNNING_EN[] PROGMEM = "PID bed cal. ";
const char MSG_PID_BED_RUNNING_DE[] PROGMEM = "PID Bett Kal.";
const char * const MSG_PID_BED_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_BED_RUNNING_EN,
MSG_PID_BED_RUNNING_EN,
MSG_PID_BED_RUNNING_EN,
MSG_PID_BED_RUNNING_EN,
MSG_PID_BED_RUNNING_EN,
MSG_PID_BED_RUNNING_DE
};
const char MSG_PID_EXTRUDER_EN[] PROGMEM = "PID calibration";
const char MSG_PID_EXTRUDER_CZ[] PROGMEM = "PID kalibrace";
const char MSG_PID_EXTRUDER_IT[] PROGMEM = "Calibrazione PID";
@ -2087,7 +2128,7 @@ const char MSG_PID_FINISHED_CZ[] PROGMEM = "PID kal. ukoncena";
const char MSG_PID_FINISHED_IT[] PROGMEM = "Cal. PID completa";
const char MSG_PID_FINISHED_ES[] PROGMEM = "Cal. PID terminada";
const char MSG_PID_FINISHED_PL[] PROGMEM = "Kal. PID zakonczona";
const char MSG_PID_FINISHED_DE[] PROGMEM = "PID Kalib. fertig";
const char MSG_PID_FINISHED_DE[] PROGMEM = "PID Kal. fertig ";
const char * const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_FINISHED_EN,
MSG_PID_FINISHED_CZ,
@ -2102,7 +2143,7 @@ const char MSG_PID_RUNNING_CZ[] PROGMEM = "PID kal. ";
const char MSG_PID_RUNNING_IT[] PROGMEM = "Cal. PID";
const char MSG_PID_RUNNING_ES[] PROGMEM = "Cal. PID ";
const char MSG_PID_RUNNING_PL[] PROGMEM = "Kal. PID";
const char MSG_PID_RUNNING_DE[] PROGMEM = "PID Kalib.";
const char MSG_PID_RUNNING_DE[] PROGMEM = "PID Kal. ";
const char * const MSG_PID_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PID_RUNNING_EN,
MSG_PID_RUNNING_CZ,
@ -2117,7 +2158,7 @@ const char MSG_PINDA_NOT_CALIBRATED_CZ[] PROGMEM = "Tiskarna nebyla teplotne zka
const char MSG_PINDA_NOT_CALIBRATED_IT[] PROGMEM = "Taratura della temperatura non ancora eseguita";
const char MSG_PINDA_NOT_CALIBRATED_ES[] PROGMEM = "La temperatura de calibracion no ha sido ajustada";
const char MSG_PINDA_NOT_CALIBRATED_PL[] PROGMEM = "Cieplna kalibracja nie byla przeprowadzona";
const char MSG_PINDA_NOT_CALIBRATED_DE[] PROGMEM = "Temperatur wurde nicht kalibriert";
const char MSG_PINDA_NOT_CALIBRATED_DE[] PROGMEM = "PINDA Temperatur Kalibrierung wurde noch nicht ausgefuehrt";
const char * const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PINDA_NOT_CALIBRATED_EN,
MSG_PINDA_NOT_CALIBRATED_CZ,
@ -2192,7 +2233,7 @@ const char MSG_PREHEAT_NOZZLE_CZ[] PROGMEM = "Predehrejte trysku!";
const char MSG_PREHEAT_NOZZLE_IT[] PROGMEM = "Preris. ugello!";
const char MSG_PREHEAT_NOZZLE_ES[] PROGMEM = "Precalentar extrusor";
const char MSG_PREHEAT_NOZZLE_PL[] PROGMEM = "Nagrzej dysze!";
const char MSG_PREHEAT_NOZZLE_DE[] PROGMEM = "Duese Vorwaermen";
const char MSG_PREHEAT_NOZZLE_DE[] PROGMEM = "Duese vorwaermen!";
const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PREHEAT_NOZZLE_EN,
MSG_PREHEAT_NOZZLE_CZ,
@ -2233,8 +2274,14 @@ const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_PRINTER_DISCONNECTED_EN[] PROGMEM = "Printer disconnected";
const char * const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1] PROGMEM = {
MSG_PRINTER_DISCONNECTED_EN
const char MSG_PRINTER_DISCONNECTED_DE[] PROGMEM = "Drucker getrent";
const char * const MSG_PRINTER_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_EN,
MSG_PRINTER_DISCONNECTED_DE
};
const char MSG_PRINT_ABORTED_EN[] PROGMEM = "Print aborted";
@ -2308,7 +2355,7 @@ const char MSG_REBOOT_CZ[] PROGMEM = "Restartujte tiskarnu";
const char MSG_REBOOT_IT[] PROGMEM = "Riavvia stampante";
const char MSG_REBOOT_ES[] PROGMEM = "Reiniciar impresora";
const char MSG_REBOOT_PL[] PROGMEM = "Restart drukarki";
const char MSG_REBOOT_DE[] PROGMEM = "Zum Uebernehmen ";
const char MSG_REBOOT_DE[] PROGMEM = "Reboot den Drucker";
const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_REBOOT_EN,
MSG_REBOOT_CZ,
@ -2378,7 +2425,7 @@ const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
const char MSG_RESUMING_PRINT_IT[] PROGMEM = "Stampa in ripresa";
const char MSG_RESUMING_PRINT_ES[] PROGMEM = "Reanudar impresion";
const char MSG_RESUMING_PRINT_PL[] PROGMEM = "Wznawianie druku";
const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck weitergehen";
const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck fortsetzen";
const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_RESUMING_PRINT_EN,
MSG_RESUMING_PRINT_CZ,
@ -2553,7 +2600,7 @@ const char MSG_SELFTEST_CHECK_BED_CZ[] PROGMEM = "Kontrola bed ";
const char MSG_SELFTEST_CHECK_BED_IT[] PROGMEM = "Verifica letto";
const char MSG_SELFTEST_CHECK_BED_ES[] PROGMEM = "Control de cama";
const char MSG_SELFTEST_CHECK_BED_PL[] PROGMEM = "Kontrola bed ";
const char MSG_SELFTEST_CHECK_BED_DE[] PROGMEM = "Pr\x81fe Bed ";
const char MSG_SELFTEST_CHECK_BED_DE[] PROGMEM = "Pruefe Bett ";
const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_CHECK_BED_EN,
MSG_SELFTEST_CHECK_BED_CZ,
@ -2643,7 +2690,7 @@ const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";;
const char MSG_SELFTEST_COOLING_FAN_IT[] PROGMEM = "Vent di stampa ant.?";;
const char MSG_SELFTEST_COOLING_FAN_ES[] PROGMEM = "Vent. al frente?";;
const char MSG_SELFTEST_COOLING_FAN_PL[] PROGMEM = "Przodni went. druku?";;
const char MSG_SELFTEST_COOLING_FAN_DE[] PROGMEM = "Vorderer Luefter?";
const char MSG_SELFTEST_COOLING_FAN_DE[] PROGMEM = "Vorderer Luefter?";;
const char * const MSG_SELFTEST_COOLING_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_COOLING_FAN_EN,
MSG_SELFTEST_COOLING_FAN_CZ,
@ -2681,7 +2728,7 @@ const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_ENDSTOP_NOTHIT_EN[] PROGMEM = "Endstop not hit";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_IT[] PROGMEM = "Finec. fuori por.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_ES[] PROGMEM = "Tope fin. no toc.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_DE[] PROGMEM = "Ende nicht getrof.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_DE[] PROGMEM = "Endsch. n. erreicht";
const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ENDSTOP_NOTHIT_EN,
MSG_SELFTEST_ENDSTOP_NOTHIT_EN,
@ -2694,7 +2741,7 @@ const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_ERROR_EN[] PROGMEM = "Selftest error !";
const char MSG_SELFTEST_ERROR_IT[] PROGMEM = "Autotest negativo";
const char MSG_SELFTEST_ERROR_ES[] PROGMEM = "Autotest error!";
const char MSG_SELFTEST_ERROR_DE[] PROGMEM = "Selbtest Fehler!";
const char MSG_SELFTEST_ERROR_DE[] PROGMEM = "Selbsttest Fehler !";
const char * const MSG_SELFTEST_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ERROR_EN,
MSG_SELFTEST_ERROR_EN,
@ -2709,7 +2756,7 @@ const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";;
const char MSG_SELFTEST_EXTRUDER_FAN_IT[] PROGMEM = "Vent SX sull'ugello?";;
const char MSG_SELFTEST_EXTRUDER_FAN_ES[] PROGMEM = "Vent. en la izg?";;
const char MSG_SELFTEST_EXTRUDER_FAN_PL[] PROGMEM = "Lewy went na dysze?";;
const char MSG_SELFTEST_EXTRUDER_FAN_DE[] PROGMEM = "Linker Luefter?";
const char MSG_SELFTEST_EXTRUDER_FAN_DE[] PROGMEM = "Linker Luefter?";;
const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_EXTRUDER_FAN_EN,
MSG_SELFTEST_EXTRUDER_FAN_CZ,
@ -2724,7 +2771,7 @@ const char MSG_SELFTEST_FAILED_CZ[] PROGMEM = "Selftest selhal ";
const char MSG_SELFTEST_FAILED_IT[] PROGMEM = "Autotest fallito";
const char MSG_SELFTEST_FAILED_ES[] PROGMEM = "Autotest fallado";
const char MSG_SELFTEST_FAILED_PL[] PROGMEM = "Selftest nieudany";
const char MSG_SELFTEST_FAILED_DE[] PROGMEM = "Selbsttest misslung.";
const char MSG_SELFTEST_FAILED_DE[] PROGMEM = "Selbsttest misluekt";
const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAILED_EN,
MSG_SELFTEST_FAILED_CZ,
@ -2739,7 +2786,7 @@ const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";;
const char MSG_SELFTEST_FAN_IT[] PROGMEM = "Prova del ventilator";;
const char MSG_SELFTEST_FAN_ES[] PROGMEM = "Test del ventilador";;
const char MSG_SELFTEST_FAN_PL[] PROGMEM = "Test wentylatora";;
const char MSG_SELFTEST_FAN_DE[] PROGMEM = "Lueftertest";
const char MSG_SELFTEST_FAN_DE[] PROGMEM = "Lueftertest";;
const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_EN,
MSG_SELFTEST_FAN_CZ,
@ -2754,7 +2801,7 @@ const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";;
const char MSG_SELFTEST_FAN_NO_IT[] PROGMEM = "Non si gira";;
const char MSG_SELFTEST_FAN_NO_ES[] PROGMEM = "Ventilador no gira";;
const char MSG_SELFTEST_FAN_NO_PL[] PROGMEM = "Nekreci sie";;
const char MSG_SELFTEST_FAN_NO_DE[] PROGMEM = "Dreht nicht";
const char MSG_SELFTEST_FAN_NO_DE[] PROGMEM = "Dreht nicht";;
const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_NO_EN,
MSG_SELFTEST_FAN_NO_CZ,
@ -2769,7 +2816,7 @@ const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";;
const char MSG_SELFTEST_FAN_YES_IT[] PROGMEM = "Gira";;
const char MSG_SELFTEST_FAN_YES_ES[] PROGMEM = "Ventilador gira";;
const char MSG_SELFTEST_FAN_YES_PL[] PROGMEM = "Kreci sie";;
const char MSG_SELFTEST_FAN_YES_DE[] PROGMEM = "Dreht";
const char MSG_SELFTEST_FAN_YES_DE[] PROGMEM = "Dreht";;
const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_YES_EN,
MSG_SELFTEST_FAN_YES_CZ,
@ -2863,7 +2910,7 @@ const char MSG_SELFTEST_WIRINGERROR_CZ[] PROGMEM = "Chyba zapojeni";
const char MSG_SELFTEST_WIRINGERROR_IT[] PROGMEM = "Errore cablaggio";
const char MSG_SELFTEST_WIRINGERROR_ES[] PROGMEM = "Error de conexion";
const char MSG_SELFTEST_WIRINGERROR_PL[] PROGMEM = "Blad polaczenia";
const char MSG_SELFTEST_WIRINGERROR_DE[] PROGMEM = "Verdrahtungfehler";
const char MSG_SELFTEST_WIRINGERROR_DE[] PROGMEM = "Verdrahtungsfehler";
const char * const MSG_SELFTEST_WIRINGERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_WIRINGERROR_EN,
MSG_SELFTEST_WIRINGERROR_CZ,
@ -2908,7 +2955,7 @@ const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
const char MSG_SET_TEMPERATURE_IT[] PROGMEM = "Imposta temperatura";
const char MSG_SET_TEMPERATURE_ES[] PROGMEM = "Establecer temp.:";
const char MSG_SET_TEMPERATURE_PL[] PROGMEM = "Ustawic temperature";
const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp. einsetzen";
const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp.einstellen";
const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SET_TEMPERATURE_EN,
MSG_SET_TEMPERATURE_CZ,
@ -2923,7 +2970,7 @@ const char MSG_SEVERE_SKEW_CZ[] PROGMEM = "Tezke zkoseni:";
const char MSG_SEVERE_SKEW_IT[] PROGMEM = "Inc. rilevante:";
const char MSG_SEVERE_SKEW_ES[] PROGMEM = "Inclin. severa:";
const char MSG_SEVERE_SKEW_PL[] PROGMEM = "Ostre sciecie:";
const char MSG_SEVERE_SKEW_DE[] PROGMEM = "Schwerer Schr.:";
const char MSG_SEVERE_SKEW_DE[] PROGMEM = "Schwere Asym.:";
const char * const MSG_SEVERE_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SEVERE_SKEW_EN,
MSG_SEVERE_SKEW_CZ,
@ -2938,7 +2985,7 @@ const char MSG_SHOW_END_STOPS_CZ[] PROGMEM = "Stav konc. spin.";
const char MSG_SHOW_END_STOPS_IT[] PROGMEM = "Stato finecorsa";
const char MSG_SHOW_END_STOPS_ES[] PROGMEM = "Ensena tope final";
const char MSG_SHOW_END_STOPS_PL[] PROGMEM = "Pokaz krancowki";
const char MSG_SHOW_END_STOPS_DE[] PROGMEM = "Endschalter Stat.";
const char MSG_SHOW_END_STOPS_DE[] PROGMEM = "Anzeigen Enschalter";
const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SHOW_END_STOPS_EN,
MSG_SHOW_END_STOPS_CZ,
@ -2968,7 +3015,7 @@ const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod [tichy]";
const char MSG_SILENT_MODE_ON_IT[] PROGMEM = "Modo [silenzioso]";
const char MSG_SILENT_MODE_ON_ES[] PROGMEM = "Modo [silencio]";
const char MSG_SILENT_MODE_ON_PL[] PROGMEM = "Mod [cichy]";
const char MSG_SILENT_MODE_ON_DE[] PROGMEM = "Mode [leise]";
const char MSG_SILENT_MODE_ON_DE[] PROGMEM = "Mode [leise]";
const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SILENT_MODE_ON_EN,
MSG_SILENT_MODE_ON_CZ,
@ -2983,7 +3030,7 @@ const char MSG_SLIGHT_SKEW_CZ[] PROGMEM = "Lehke zkoseni:";
const char MSG_SLIGHT_SKEW_IT[] PROGMEM = "Incl. leggera:";
const char MSG_SLIGHT_SKEW_ES[] PROGMEM = "Inclin. ligera:";
const char MSG_SLIGHT_SKEW_PL[] PROGMEM = "Lekkie sciecie:";
const char MSG_SLIGHT_SKEW_DE[] PROGMEM = "Leichter Schr.:";
const char MSG_SLIGHT_SKEW_DE[] PROGMEM = "Geringe Asym.:";
const char * const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SLIGHT_SKEW_EN,
MSG_SLIGHT_SKEW_CZ,
@ -2999,8 +3046,14 @@ const char * const MSG_SOFTWARE_RESET_LANG_TABLE[1] PROGMEM = {
};
const char MSG_SORTING_EN[] PROGMEM = "Sorting files";
const char * const MSG_SORTING_LANG_TABLE[1] PROGMEM = {
MSG_SORTING_EN
const char MSG_SORTING_DE[] PROGMEM = "Sortiere Dateien";
const char * const MSG_SORTING_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_EN,
MSG_SORTING_DE
};
const char MSG_SORT_ALPHA_EN[] PROGMEM = "Sort: [Alphabet]";
@ -3009,13 +3062,25 @@ const char * const MSG_SORT_ALPHA_LANG_TABLE[1] PROGMEM = {
};
const char MSG_SORT_NONE_EN[] PROGMEM = "Sort: [None]";
const char * const MSG_SORT_NONE_LANG_TABLE[1] PROGMEM = {
MSG_SORT_NONE_EN
const char MSG_SORT_NONE_DE[] PROGMEM = "Sort: [Keine]";
const char * const MSG_SORT_NONE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_EN,
MSG_SORT_NONE_DE
};
const char MSG_SORT_TIME_EN[] PROGMEM = "Sort: [Time]";
const char * const MSG_SORT_TIME_LANG_TABLE[1] PROGMEM = {
MSG_SORT_TIME_EN
const char MSG_SORT_TIME_DE[] PROGMEM = "Sort: [Zeit]";
const char * const MSG_SORT_TIME_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_EN,
MSG_SORT_TIME_DE
};
const char MSG_SPEED_EN[] PROGMEM = "Speed";
@ -3088,7 +3153,7 @@ const char MSG_STATS_TOTALFILAMENT_CZ[] PROGMEM = "Filament celkem :";
const char MSG_STATS_TOTALFILAMENT_IT[] PROGMEM = "Filamento tot:";
const char MSG_STATS_TOTALFILAMENT_ES[] PROGMEM = "Filamento total:";
const char MSG_STATS_TOTALFILAMENT_PL[] PROGMEM = "Filament lacznie :";
const char MSG_STATS_TOTALFILAMENT_DE[] PROGMEM = "Gesamtfilament:";
const char MSG_STATS_TOTALFILAMENT_DE[] PROGMEM = "Filament Gesamt:";
const char * const MSG_STATS_TOTALFILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_STATS_TOTALFILAMENT_EN,
MSG_STATS_TOTALFILAMENT_CZ,
@ -3195,7 +3260,7 @@ const char MSG_TAKE_EFFECT_CZ[] PROGMEM = " pro projeveni zmen";
const char MSG_TAKE_EFFECT_IT[] PROGMEM = " per attualizzare";
const char MSG_TAKE_EFFECT_ES[] PROGMEM = " para aplicar cambios";
const char MSG_TAKE_EFFECT_PL[] PROGMEM = " wprow. zmian";
const char MSG_TAKE_EFFECT_DE[] PROGMEM = "Drucker neu starten";
const char MSG_TAKE_EFFECT_DE[] PROGMEM = " um wirksam zu werden";
const char * const MSG_TAKE_EFFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TAKE_EFFECT_EN,
MSG_TAKE_EFFECT_CZ,
@ -3225,7 +3290,7 @@ const char MSG_TEMP_CALIBRATION_CZ[] PROGMEM = "Tepl. kal. ";
const char MSG_TEMP_CALIBRATION_IT[] PROGMEM = "Cal. temp. ";
const char MSG_TEMP_CALIBRATION_ES[] PROGMEM = "Cal. temp. ";
const char MSG_TEMP_CALIBRATION_PL[] PROGMEM = "Ciepl. kal. ";
const char MSG_TEMP_CALIBRATION_DE[] PROGMEM = "Temp Kalib. ";
const char MSG_TEMP_CALIBRATION_DE[] PROGMEM = "PINDA Temp.Kal. ";
const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_EN,
MSG_TEMP_CALIBRATION_CZ,
@ -3240,7 +3305,7 @@ const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncen
const char MSG_TEMP_CALIBRATION_DONE_IT[] PROGMEM = "Taratura temperatura terminata. Fare click per continuare.";
const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Presionar para continuar.";
const char MSG_TEMP_CALIBRATION_DONE_PL[] PROGMEM = "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem";
const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Temp. Kalibrierung fertig. Klicken um weiter zu gehen.";
const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Die PINDA Temperaturkalibrierung ist beendet. Klicke um fortzufahren.";
const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_DONE_EN,
MSG_TEMP_CALIBRATION_DONE_CZ,
@ -3255,7 +3320,7 @@ const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_IT[] PROGMEM = "Cal. temp. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_ES[] PROGMEM = "Cal. temp. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_PL[] PROGMEM = "Ciepl. kal. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "Temp. Kal. [OFF]";
const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "PINDA T.Kal.[OFF]";
const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_OFF_EN,
MSG_TEMP_CALIBRATION_OFF_CZ,
@ -3270,7 +3335,7 @@ const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [ON]";
const char MSG_TEMP_CALIBRATION_ON_IT[] PROGMEM = "Cal. temp. [ON]";
const char MSG_TEMP_CALIBRATION_ON_ES[] PROGMEM = "Cal. temp. [ON]";
const char MSG_TEMP_CALIBRATION_ON_PL[] PROGMEM = "Ciepl. kal. [ON]";
const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "Temp. Kal. [ON]";
const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "PINDA T.Kal. [ON]";
const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CALIBRATION_ON_EN,
MSG_TEMP_CALIBRATION_ON_CZ,
@ -3359,7 +3424,7 @@ const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament";
const char MSG_UNLOAD_FILAMENT_IT[] PROGMEM = "Scarica filamento";
const char MSG_UNLOAD_FILAMENT_ES[] PROGMEM = "Soltar filamento";
const char MSG_UNLOAD_FILAMENT_PL[] PROGMEM = "Wyjac filament";
const char MSG_UNLOAD_FILAMENT_DE[] PROGMEM = "Filament entladen";
const char MSG_UNLOAD_FILAMENT_DE[] PROGMEM = "Filament entnehmen";
const char * const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_UNLOAD_FILAMENT_EN,
MSG_UNLOAD_FILAMENT_CZ,
@ -3449,7 +3514,7 @@ const char MSG_USED_CZ[] PROGMEM = "Pouzite behem tisku";
const char MSG_USED_IT[] PROGMEM = "Usati nella stampa";
const char MSG_USED_ES[] PROGMEM = "Usado en impresion";
const char MSG_USED_PL[] PROGMEM = "Uzyte przy druku";
const char MSG_USED_DE[] PROGMEM = "Beim Druck benutzte";
const char MSG_USED_DE[] PROGMEM = "Benutzt beim Druck";
const char * const MSG_USED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_USED_EN,
MSG_USED_CZ,
@ -3462,7 +3527,7 @@ const char * const MSG_USED_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_USERWAIT_EN[] PROGMEM = "Wait for user...";
const char MSG_USERWAIT_IT[] PROGMEM = "Attendendo utente";
const char MSG_USERWAIT_ES[] PROGMEM = "Esperando ordenes";
const char MSG_USERWAIT_DE[] PROGMEM = "Warte auf user...";
const char MSG_USERWAIT_DE[] PROGMEM = "Warte auf Nutzer...";
const char * const MSG_USERWAIT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_USERWAIT_EN,
MSG_USERWAIT_EN,
@ -3497,7 +3562,7 @@ const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podloz
const char MSG_WAITING_TEMP_IT[] PROGMEM = "In attesa del raffreddamento della testina e del piatto";
const char MSG_WAITING_TEMP_ES[] PROGMEM = "Esperando enfriamiento de la cama y del extrusor.";
const char MSG_WAITING_TEMP_PL[] PROGMEM = "Oczekiwanie na wychlodzenie dyszy i podkladki.";
const char MSG_WAITING_TEMP_DE[] PROGMEM = "Warten auf Abkuehlung von Heater und Bed.";
const char MSG_WAITING_TEMP_DE[] PROGMEM = "Warten auf Abkuehlung von Duese und Bett.";
const char * const MSG_WAITING_TEMP_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_WAITING_TEMP_EN,
MSG_WAITING_TEMP_CZ,
@ -3572,7 +3637,7 @@ const char MSG_Y_DISTANCE_FROM_MIN_CZ[] PROGMEM = "Y vzdalenost od min:";
const char MSG_Y_DISTANCE_FROM_MIN_IT[] PROGMEM = "Distanza Y da min:";
const char MSG_Y_DISTANCE_FROM_MIN_ES[] PROGMEM = "Dist. Y desde min:";
const char MSG_Y_DISTANCE_FROM_MIN_PL[] PROGMEM = "Odleglosc Y od min.:";
const char MSG_Y_DISTANCE_FROM_MIN_DE[] PROGMEM = "Y Entfernung vom min";
const char MSG_Y_DISTANCE_FROM_MIN_DE[] PROGMEM = "Y Entfernung von min";
const char * const MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_Y_DISTANCE_FROM_MIN_EN,
MSG_Y_DISTANCE_FROM_MIN_CZ,

26
Firmware/language_all.h
View File

@ -150,8 +150,8 @@ extern const char* const MSG_CURRENT_LANG_TABLE[LANG_NUM];
#define MSG_CURRENT LANG_TABLE_SELECT(MSG_CURRENT_LANG_TABLE)
extern const char* const MSG_DATE_LANG_TABLE[LANG_NUM];
#define MSG_DATE LANG_TABLE_SELECT(MSG_DATE_LANG_TABLE)
extern const char* const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[1];
#define MSG_DEFAULT_SETTINGS_LOADED LANG_TABLE_SELECT_EXPLICIT(MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE, 0)
extern const char* const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[LANG_NUM];
#define MSG_DEFAULT_SETTINGS_LOADED LANG_TABLE_SELECT(MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE)
extern const char* const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM];
#define MSG_DISABLE_STEPPERS LANG_TABLE_SELECT(MSG_DISABLE_STEPPERS_LANG_TABLE)
extern const char* const MSG_DWELL_LANG_TABLE[LANG_NUM];
@ -404,6 +404,12 @@ extern const char* const MSG_PAUSE_PRINT_LANG_TABLE[LANG_NUM];
#define MSG_PAUSE_PRINT LANG_TABLE_SELECT(MSG_PAUSE_PRINT_LANG_TABLE)
extern const char* const MSG_PICK_Z_LANG_TABLE[LANG_NUM];
#define MSG_PICK_Z LANG_TABLE_SELECT(MSG_PICK_Z_LANG_TABLE)
extern const char* const MSG_PID_BED_LANG_TABLE[LANG_NUM];
#define MSG_PID_BED LANG_TABLE_SELECT(MSG_PID_BED_LANG_TABLE)
extern const char* const MSG_PID_BED_FINISHED_LANG_TABLE[LANG_NUM];
#define MSG_PID_BED_FINISHED LANG_TABLE_SELECT(MSG_PID_BED_FINISHED_LANG_TABLE)
extern const char* const MSG_PID_BED_RUNNING_LANG_TABLE[LANG_NUM];
#define MSG_PID_BED_RUNNING LANG_TABLE_SELECT(MSG_PID_BED_RUNNING_LANG_TABLE)
extern const char* const MSG_PID_EXTRUDER_LANG_TABLE[LANG_NUM];
#define MSG_PID_EXTRUDER LANG_TABLE_SELECT(MSG_PID_EXTRUDER_LANG_TABLE)
extern const char* const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM];
@ -430,8 +436,8 @@ extern const char* const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM];
#define MSG_PREPARE_FILAMENT LANG_TABLE_SELECT(MSG_PREPARE_FILAMENT_LANG_TABLE)
extern const char* const MSG_PRESS_LANG_TABLE[LANG_NUM];
#define MSG_PRESS LANG_TABLE_SELECT(MSG_PRESS_LANG_TABLE)
extern const char* const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1];
#define MSG_PRINTER_DISCONNECTED LANG_TABLE_SELECT_EXPLICIT(MSG_PRINTER_DISCONNECTED_LANG_TABLE, 0)
extern const char* const MSG_PRINTER_DISCONNECTED_LANG_TABLE[LANG_NUM];
#define MSG_PRINTER_DISCONNECTED LANG_TABLE_SELECT(MSG_PRINTER_DISCONNECTED_LANG_TABLE)
extern const char* const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM];
#define MSG_PRINT_ABORTED LANG_TABLE_SELECT(MSG_PRINT_ABORTED_LANG_TABLE)
extern const char* const MSG_PRINT_PAUSED_LANG_TABLE[LANG_NUM];
@ -570,14 +576,14 @@ extern const char* const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM];
#define MSG_SLIGHT_SKEW LANG_TABLE_SELECT(MSG_SLIGHT_SKEW_LANG_TABLE)
extern const char* const MSG_SOFTWARE_RESET_LANG_TABLE[1];
#define MSG_SOFTWARE_RESET LANG_TABLE_SELECT_EXPLICIT(MSG_SOFTWARE_RESET_LANG_TABLE, 0)
extern const char* const MSG_SORTING_LANG_TABLE[1];
#define MSG_SORTING LANG_TABLE_SELECT_EXPLICIT(MSG_SORTING_LANG_TABLE, 0)
extern const char* const MSG_SORTING_LANG_TABLE[LANG_NUM];
#define MSG_SORTING LANG_TABLE_SELECT(MSG_SORTING_LANG_TABLE)
extern const char* const MSG_SORT_ALPHA_LANG_TABLE[1];
#define MSG_SORT_ALPHA LANG_TABLE_SELECT_EXPLICIT(MSG_SORT_ALPHA_LANG_TABLE, 0)
extern const char* const MSG_SORT_NONE_LANG_TABLE[1];
#define MSG_SORT_NONE LANG_TABLE_SELECT_EXPLICIT(MSG_SORT_NONE_LANG_TABLE, 0)
extern const char* const MSG_SORT_TIME_LANG_TABLE[1];
#define MSG_SORT_TIME LANG_TABLE_SELECT_EXPLICIT(MSG_SORT_TIME_LANG_TABLE, 0)
extern const char* const MSG_SORT_NONE_LANG_TABLE[LANG_NUM];
#define MSG_SORT_NONE LANG_TABLE_SELECT(MSG_SORT_NONE_LANG_TABLE)
extern const char* const MSG_SORT_TIME_LANG_TABLE[LANG_NUM];
#define MSG_SORT_TIME LANG_TABLE_SELECT(MSG_SORT_TIME_LANG_TABLE)
extern const char* const MSG_SPEED_LANG_TABLE[LANG_NUM];
#define MSG_SPEED LANG_TABLE_SELECT(MSG_SPEED_LANG_TABLE)
extern const char* const MSG_STACK_ERROR_LANG_TABLE[1];

619
Firmware/language_de.h
View File

@ -1,282 +1,212 @@
+/**
+ * German
+ *
+ * LCD Menu Messages
+ * Please note these are limited to 17 characters!
+ *
+ */
+
+#define(length = 20) WELCOME_MSG CUSTOM_MENDEL_NAME " bereit."
+ #define MSG_SD_INSERTED "SD eingesetzt"
+ #define MSG_SD_REMOVED "SD entfernt "
+ #define MSG_MAIN "Hauptmenue"
+ #define MSG_DISABLE_STEPPERS "Motoren aus"
+ #define MSG_AUTO_HOME "Startposition"
+ #define MSG_SET_HOME_OFFSETS "Abstand vom Ursprung einstellen"
+ #define MSG_SET_ORIGIN "Ursprung einstellen"
+ #define MSG_COOLDOWN "Abkuehlen"
+ #define MSG_SWITCH_PS_ON "Netzteil EIN"
+ #define MSG_SWITCH_PS_OFF "Netzteil AUS"
+ #define MSG_MOVE_AXIS "Achsbewegung"
+ #define MSG_MOVE_X "Bewege X"
+ #define MSG_MOVE_Y "Bewege Y"
+ #define MSG_MOVE_Z "Bewege Z"
+ #define MSG_MOVE_E "Extruder"
+ #define MSG_SPEED "Geschwindigkeit"
+ #define MSG_NOZZLE "Duese"
+ #define MSG_NOZZLE1 "Duese2"
+ #define MSG_NOZZLE2 "Duese3"
+ #define MSG_BED "Bed"
+ #define MSG_FAN_SPEED "Luefter-Tempo"
+ #define MSG_FLOW "Durchfluss"
+ #define MSG_FLOW0 "Durchfluss 0"
+ #define MSG_FLOW1 "Durchfluss 1"
+ #define MSG_FLOW2 "Durchfluss 2"
+ #define MSG_CONTROL "Kontrolle"
+ #define MSG_MIN " \002 Min"
+ #define MSG_MAX " \002 Max"
+ #define MSG_FACTOR " \002 Fakt"
+ #define MSG_TEMPERATURE "Temperatur"
+ #define MSG_MOTION "Bewegung"
+ #define MSG_VOLUMETRIC "Filament"
+ #define MSG_VOLUMETRIC_ENABLED "E in mm3"
+ #define MSG_STORE_EPROM "Abspeichern"
+ #define MSG_LOAD_EPROM "Lade Speicher"
+ #define MSG_RESTORE_FAILSAFE "Standardwerte setzen"
+ #define MSG_REFRESH "\xF8" "Erneuern"
+ #define MSG_WATCH "Information"
+ #define MSG_TUNE "Feineinstellung"
+ #define MSG_PAUSE_PRINT "Druck unterbrech."
+ #define MSG_RESUME_PRINT "Fortsetzen"
+ #define MSG_STOP_PRINT "Druck abbrechen"
+ #define MSG_CARD_MENU "Drucken von SD"
+ #define MSG_NO_CARD "Keine SD Karte"
+ #define MSG_DWELL "Einen Moment bitte."
+ #define MSG_USERWAIT "Warte auf user..."
+ #define MSG_RESUMING "Druck fortgesetzt"
+ #define(length = 20) MSG_PRINT_ABORTED "Druck abgebrochen"
+ #define MSG_NO_MOVE "Keine Bewegung."
+ #define MSG_KILLED "ABGEBROCHEN. "
+ #define MSG_STOPPED "GESTOPPT. "
+ #define MSG_FILAMENTCHANGE "Filament-Wechsel"
+ #define MSG_INIT_SDCARD "Init SD Karte"
+ #define MSG_CNG_SDCARD "Wechsel SD Karte"
+ #define MSG_BABYSTEP_X "Babystep X"
+ #define MSG_BABYSTEP_Y "Babystep Y"
+ #define MSG_BABYSTEP_Z "Z einstellen"
+ #define MSG_ADJUSTZ "Auto Z einstellen?"
+ #define MSG_PICK_Z "Waehle Abdruck"
+
+#define MSG_SETTINGS "Einstellungen"
+ #define MSG_PREHEAT "Vorwaermen"
+ #define MSG_UNLOAD_FILAMENT "Filament entladen"
+ #define MSG_LOAD_FILAMENT "Filament laden"
+
+#define MSG_RECTRACT "Retract"
+ #define MSG_ERROR "FEHLER:"
+ #define(length = 20) MSG_PREHEAT_NOZZLE "Duese Vorwaermen"
+ #define MSG_SUPPORT "Support"
+ #define(length = 20) MSG_CORRECTLY "Wechsel ok?"
+ #define MSG_YES "Ja"
+ #define MSG_NO "Nein"
+ #define(length = 19) MSG_NOT_LOADED "Fil. nicht geladen"
+ #define MSG_NOT_COLOR "Farbe unklar"
+ #define(length = 20) MSG_LOADING_FILAMENT "Filament leadt"
+ #define(length = 20) MSG_PLEASE_WAIT "Bitte warten"
+ #define MSG_LOADING_COLOR "Lade Farbe"
+ #define MSG_CHANGE_SUCCESS "Wechsel erfolgr.!"
+ #define(length = 20) MSG_PRESS "und Knopf druecken"
+ #define(length = 20) MSG_INSERT_FILAMENT "Filament einlegen"
+ #define(length = 20) MSG_CHANGING_FILAMENT "Filament-Wechsel!"
+
+
+#define MSG_SILENT_MODE_ON "Mode [leise]"
+ #define MSG_SILENT_MODE_OFF "Mode [Hohe Leist]"
+ #define(length = 20) MSG_REBOOT "Zum Uebernehmen "
+ #define(length = 22) MSG_TAKE_EFFECT "Drucker neu starten"
+
+#define MSG_Enqueing "enqueuing \"
+ #define MSG_POWERUP "Einschalten"
+ #define MSG_CONFIGURATION_VER " Letztes Update:"
+ #define MSG_FREE_MEMORY " Freier Speicher: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_ERR_CHECKSUM_MISMATCH "Pruefsummenfehler, Letzte Zeile: " //Checksum Fehler, Letzte Zeile: "
+ #define MSG_ERR_NO_CHECKSUM "Keine Pruefsumme mit Zeilennummer, Letzte Zeile: " //Keine Checksum mit Zeilennummer, Letzte Zeile: "
+ #define MSG_BEGIN_FILE_LIST "Beginn Dateiliste"
+ #define MSG_END_FILE_LIST "Ende Dateiliste"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Falscher Extruder"
+ #define MSG_M105_INVALID_EXTRUDER "M105 Falscher Extruder"
+ #define MSG_M200_INVALID_EXTRUDER "M200 Falscher Extruder"
+ #define MSG_M218_INVALID_EXTRUDER "M218 Falscher Extruder"
+ #define MSG_M221_INVALID_EXTRUDER "M221 Falscher Extruder"
+ #define MSG_ERR_NO_THERMISTORS "Keine Thermistoren - keine Temperatur"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Falscher Extruder"
+ #define MSG_HEATING "Aufwaermen"
+ #define(length = 20) MSG_HEATING_COMPLETE "Aufwaermen OK"
+ #define MSG_BED_HEATING "Bed aufwaermen"
+ #define MSG_BED_DONE "Bed OK"
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+ #define MSG_ERR_KILLED "Printer gestoppt. kill() aufgerufen!"
+ #define MSG_ERR_STOPPED "Drucker aufgrund von Fehlern gestoppt. Fehler beheben und mit M999 neu starten. (Temperatur wird zurueckgesetzt. Nach dem Neustart neu einstellen!)"
+ #define MSG_RESEND "Wiederholen: "
+ #define MSG_M119_REPORT "Statusbericht Endanschlag"
+ #define MSG_ENDSTOP_HIT "AUSGELOEST"
+ #define MSG_ENDSTOP_OPEN "offen"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "Kann Unterverz. nicht oeffnen"
+ #define MSG_SD_INIT_FAIL "SD Init fehlerhaft"
+ #define MSG_SD_VOL_INIT_FAIL "Dateisystem Init fehlerhaft"
+ #define MSG_SD_OPENROOT_FAIL "Zugriff auf Basisverzeichnis misslungen"
+ #define MSG_SD_CARD_OK "SD Karte ok"
+ #define MSG_SD_WORKDIR_FAIL "Oeffnen Arbeitsverzeichnis misslungen"
+ #define MSG_SD_OPEN_FILE_FAIL "Fehler beim Oeffnen der Datei: "
+ #define MSG_SD_FILE_OPENED "Datei geoeffnet: "
+ #define MSG_SD_FILE_SELECTED "Datei ausgewaehlt"
+ #define MSG_SD_WRITE_TO_FILE "Schreiben der Datei: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Kein SD Print"
+ #define MSG_SD_ERR_WRITE_TO_FILE "Fehler beim Schreiben in Datei"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Zugangsproblem Unterverzeichnis: "
+ #define MSG_STEPPER_TOO_HIGH "Schrittrate zu hoch"
+ #define MSG_ENDSTOPS_HIT "Endanschlag erreicht"
+ #define MSG_ERR_COLD_EXTRUDE_STOP "Stopp, Extruder kalt!"
+ #define MSG_BABYSTEPPING_X "Babystepping X"
+ #define MSG_BABYSTEPPING_Y "Babystepping Y"
+ #define MSG_BABYSTEPPING_Z "Z wurde eingestellt"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Menuestruktur fehlerhaft"
+
+#define MSG_LANGUAGE_NAME "Deutsch"
+ #define MSG_LANGUAGE_SELECT "Waehle Sprache"
+ #define MSG_PRUSA3D "prusa3d.com"
+ #define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
+ #define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
+
+#define MSG_SELFTEST_ERROR "Selbtest Fehler!"
+ #define MSG_SELFTEST_PLEASECHECK "Bitte pruefe:"
+ #define MSG_SELFTEST_NOTCONNECTED "Nicht angeschlossen"
+ #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
+ #define MSG_SELFTEST_BEDHEATER "Bed / Heater"
+ #define MSG_SELFTEST_WIRINGERROR "Verdrahtungfehler"
+ #define MSG_SELFTEST_ENDSTOPS "Endschalter"
+ #define MSG_SELFTEST_MOTOR "Motor"
+ #define MSG_SELFTEST_ENDSTOP "Endstop"
+ #define MSG_SELFTEST_ENDSTOP_NOTHIT "Ende nicht getrof."
+ #define MSG_SELFTEST_OK "Selbsttest OK"
+ #define MSG_LOOSE_PULLEY "Lose Riemenscheibe"
+
+#define MSG_SELFTEST_FAN "Lueftertest"
+#define(length = 20) MSG_SELFTEST_COOLING_FAN "Vorderer Luefter?"
+#define(length = 20) MSG_SELFTEST_EXTRUDER_FAN "Linker Luefter?"
+#define MSG_SELFTEST_FAN_YES "Dreht"
+#define MSG_SELFTEST_FAN_NO "Dreht nicht"
+
+#define(length = 20) MSG_STATS_TOTALFILAMENT "Gesamtfilament:"
+ #define(length = 20) MSG_STATS_TOTALPRINTTIME "Totale Druckzeit:"
+ #define(length = 20) MSG_STATS_FILAMENTUSED "Filamentverbrauch:"
+ #define(length = 20) MSG_STATS_PRINTTIME "Druckzeit: "
+ #define(length = 20) MSG_SELFTEST_START "Selbsttest start "
+ #define(length = 20) MSG_SELFTEST_CHECK_ENDSTOPS "Pruefe Endschalter "
+ #define(length = 20) MSG_SELFTEST_CHECK_HOTEND "Pruefe Hotend"
+ #define(length = 20) MSG_SELFTEST_CHECK_X "Pruefe X Achse "
+ #define(length = 20) MSG_SELFTEST_CHECK_Y "Pruefe Y Achse "
+ #define(length = 20) MSG_SELFTEST_CHECK_Z "Pruefe Z Achse "
+ #define(length = 20) MSG_SELFTEST_CHECK_BED "Pr\x81fe Bed "
+ #define(length = 20) MSG_SELFTEST_CHECK_ALLCORRECT "Alles richtig "
+ #define MSG_SELFTEST "Selbsttest "
+ #define(length = 20) MSG_SELFTEST_FAILED "Selbsttest misslung."
+ #define MSG_STATISTICS "Statistiken "
+ #define MSG_USB_PRINTING "Drucken ueber USB"
+ #define MSG_HOMEYZ "Kalibrieren Z"
+ #define MSG_HOMEYZ_PROGRESS "Kalibriere Z"
+ #define MSG_HOMEYZ_DONE "Kalibrierung OK"
+
+#define MSG_SHOW_END_STOPS "Endschalter Stat."
+ #define MSG_CALIBRATE_BED "Kalibrierung XYZ"
+ #define MSG_CALIBRATE_BED_RESET "Reset XYZ Kalibr."
+
/**
* German
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
+#define(length = 20, lines = 8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrieren von XYZ. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben."
+ #define(length = 20, lines = 8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrieren von Z. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken wenn ganz oben."
+
#define WELCOME_MSG CUSTOM_MENDEL_NAME " bereit."
#define MSG_SD_INSERTED "SD eingesetzt"
#define MSG_SD_REMOVED "SD entfernt "
#define MSG_MAIN "Hauptmenue"
#define MSG_DISABLE_STEPPERS "Motoren aus"
#define MSG_AUTO_HOME "Startposition"
#define MSG_SET_HOME_OFFSETS "Setze Homeversatz"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_COOLDOWN "Abkuehlen"
#define MSG_SWITCH_PS_ON "Netzteil EIN"
#define MSG_SWITCH_PS_OFF "Netzteil AUS"
#define MSG_MOVE_AXIS "Bewege Achse"
#define MSG_MOVE_X "Bewege X"
#define MSG_MOVE_Y "Bewege Y"
#define MSG_MOVE_Z "Bewege Z"
#define MSG_MOVE_E "Extruder"
#define MSG_SPEED "Geschwindigkeit"
#define MSG_NOZZLE "Duese"
#define MSG_NOZZLE1 "Duese2"
#define MSG_NOZZLE2 "Duese3"
#define MSG_BED "Bett"
#define MSG_FAN_SPEED "Luefter-Tempo"
#define MSG_FLOW "Durchfluss"
#define MSG_FLOW0 "Durchfluss 0"
#define MSG_FLOW1 "Durchfluss 1"
#define MSG_FLOW2 "Durchfluss 2"
#define MSG_CONTROL "Einstellungen"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fakt"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_STORE_EPROM "EEPROM speichern"
#define MSG_LOAD_EPROM "EEPROM laden"
#define MSG_RESTORE_FAILSAFE "Standardwerte setzen"
#define MSG_REFRESH "Aktualisieren"
#define MSG_WATCH "Information"
#define MSG_TUNE "Feineinstellung"
#define MSG_PAUSE_PRINT "Pause"
#define MSG_RESUME_PRINT "Fortsetzen"
#define MSG_STOP_PRINT "Druck abbrechen"
#define MSG_CARD_MENU "Drucken von SD"
#define MSG_NO_CARD "Keine SD Karte"
#define MSG_DWELL "Warten..."
#define MSG_USERWAIT "Warte auf Nutzer..."
#define MSG_RESUMING "Druck fortgesetzt"
#define MSG_PRINT_ABORTED "Druck abgebrochen"
#define MSG_NO_MOVE "Keine Bewegung."
#define MSG_KILLED "ABGEBROCHEN. "
#define MSG_STOPPED "GESTOPPT. "
#define MSG_FILAMENTCHANGE "Filament-Wechsel"
#define MSG_INIT_SDCARD "SD erkennen"
#define MSG_CNG_SDCARD "SD wechseln"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Live Z einstellen"
#define MSG_ADJUSTZ "Auto Z einstellen?"
#define MSG_PICK_Z "Waehle Druck"
+#define(length = 20, lines = 8) MSG_CONFIRM_NOZZLE_CLEAN "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber."
+ #define(length = 20, lines = 2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Ist der Schlitten ganz oben?"
+
+#define(length = 60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Suchen Bed Kalibrierpunkt"
+ #define(length = 14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " von 4"
+ #define(length = 60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Verbesserung Bed Kalibrierpunkt"
+ #define(length = 14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " von 9"
+ #define(length = 60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Messen der Referenzhoehe des Kalibrierpunktes"
+ #define(length = 14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " von 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration "
+
+#define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ-Kalibrierung fehlgeschlagen. Bed-Kalibrierpunkt nicht gefunden."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
#define MSG_SETTINGS "Einstellungen"
#define MSG_PREHEAT "Vorwaermen"
#define MSG_UNLOAD_FILAMENT "Filament entnehmen"
#define MSG_LOAD_FILAMENT "Filament laden"
#define MSG_LOAD_FILAMENT_1 "Filament 1 laden"
#define MSG_LOAD_FILAMENT_2 "Filament 2 laden"
#define MSG_LOAD_FILAMENT_3 "Filament 3 laden"
#define MSG_LOAD_FILAMENT_4 "Filament 4 laden"
#define MSG_UNLOAD_FILAMENT_1 "Filament 1 entnehmen"
#define MSG_UNLOAD_FILAMENT_2 "Filament 2 entnehmen"
#define MSG_UNLOAD_FILAMENT_3 "Filament 3 entnehmen"
#define MSG_UNLOAD_FILAMENT_4 "Filament 4 entnehmen"
#define MSG_UNLOAD_ALL "Alle entnehmen"
#define MSG_LOAD_ALL "Alle laden"
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ-Kalibrierung ok. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!"
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ Kalibrierung in Ordnung. Schiefheit wird automatisch korrigiert."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit vorne."
+ #define(length = 20, lines = 8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit vorne."
+
+#define(length = 20, lines = 4) MSG_BED_LEVELING_FAILED_POINT_LOW "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset"
+ #define(length = 20, lines = 4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Z-Kalibrierung fehlgeschlg. Sensor zu hoch ausgeloest. Warte auf Reset."
+ #define(length = 20, lines = 4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Z-Kalibrierung fehlgeschlg. Sensor nicht angeschlossen. Warte auf Reset."
+
+#define(length = 20, lines = 2) MSG_NEW_FIRMWARE_AVAILABLE "Neue Firmware Version verfuegbar:"
+ #define(length = 20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Bitte aktualisieren."
+
+ #define(length = 20, lines = 8) MSG_FOLLOW_CALIBRATION_FLOW "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel First steps, Abschnitt Calibration flow."
+ #define(length = 20, lines = 12) MSG_BABYSTEP_Z_NOT_SET "Der Abstand zwischen der Spitze der Duese und der Bed ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration."
+
+
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T0 "Filament in extruder 1 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T1 "Filament in extruder 2 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T2 "Filament in extruder 3 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 4) MSG_FILAMENT_LOADING_T3 "Filament in extruder 4 einlegen. Klicken wenn fertig."
+ #define(length = 20, lines = 1) MSG_CHANGE_EXTR "Wechsel extruder"
+
#define MSG_RECTRACT "Retract"
#define MSG_ERROR "FEHLER:"
#define MSG_PREHEAT_NOZZLE "Duese vorwaermen!"
#define MSG_SUPPORT "Support"
#define MSG_CORRECTLY "Wechsel ok?"
#define MSG_YES "Ja"
#define MSG_NO "Nein"
#define MSG_NOT_LOADED "Fil. nicht geladen"
#define MSG_NOT_COLOR "Farbe nicht klar."
#define MSG_LOADING_FILAMENT "Filament laedt"
#define MSG_PLEASE_WAIT "Bitte warten"
#define MSG_LOADING_COLOR "Lade Farbe"
#define MSG_CHANGE_SUCCESS "Wechsel erfolgreich!"
#define MSG_PRESS "und Knopf druecken"
#define MSG_INSERT_FILAMENT "Filament einlegen"
#define MSG_CHANGING_FILAMENT "Filament-Wechsel!"
+ #define(length = 20, lines = 4) MSG_FIL_ADJUSTING "Filament positionieren. Bitte warten."
+ #define(length = 20, lines = 8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig."
+
+ #define(length = 20, lines = 1) MSG_CALIBRATE_E "Kalibriere E"
+//#define(length=20, lines=1) "Reset E Cal."
#define MSG_SILENT_MODE_ON "Mode [leise]"
#define MSG_SILENT_MODE_OFF "Mode [Hohe Leist]"
#define MSG_REBOOT "Reboot den Drucker"
#define MSG_TAKE_EFFECT " um wirksam zu werden"
+#define(length = 20, lines = 8) MSG_E_CAL_KNOB "Knopf drehen bis die Filamentmarkierung erreicht ist. Klicken wenn fertig."
+
+//#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print"
#define MSG_Enqueing "enqueuing \"
#define MSG_POWERUP "Einschalten"
#define MSG_CONFIGURATION_VER " Letzes Updated: "
#define MSG_FREE_MEMORY " Freier Speicher: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "Pruefsummenfehler, Letzte Zeile: " //Checksum Fehler, Letzte Zeile: "
#define MSG_ERR_NO_CHECKSUM "Keine Pruefsumme mit Zeilennummer, Letzte Zeile: " //Keine Checksum mit Zeilennummer, Letzte Zeile: "
#define MSG_BEGIN_FILE_LIST "Beginn Dateiliste"
#define MSG_END_FILE_LIST "Ende Dateiliste"
#define MSG_M104_INVALID_EXTRUDER "M104 Falscher Extruder"
#define MSG_M105_INVALID_EXTRUDER "M105 Falscher Extruder"
#define MSG_M200_INVALID_EXTRUDER "M200 Falscher Extruder"
#define MSG_M218_INVALID_EXTRUDER "M218 Falscher Extruder"
#define MSG_M221_INVALID_EXTRUDER "M221 Falscher Extruder"
#define MSG_ERR_NO_THERMISTORS "Keine Temp.sensoren - keine Temperatur"
#define MSG_M109_INVALID_EXTRUDER "M109 Falscher Extruder"
#define MSG_HEATING "Aufwaermen"
#define MSG_HEATING_COMPLETE "Aufwaermen OK"
#define MSG_BED_HEATING "Bett aufwaermen"
#define MSG_BED_DONE "Bett OK"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_ERR_KILLED "Drucker gestoppt. kill() aufgerufen!"
#define MSG_ERR_STOPPED "Der Drucker wurde aufgrund von Fehlern gestoppt. Beheben Sie den Fehler und verwenden Sie M999, um neu zu starten. (Temperatur wird reset. Stellen Sie es nach dem Neustart ein)"
#define MSG_RESEND "Wiederholen: "
#define MSG_M119_REPORT "Endstop status anzeigen"
#define MSG_ENDSTOP_HIT "AUSGELOEST"
#define MSG_ENDSTOP_OPEN "offen"
+#define(length = 20, lines = 8) MSG_MARK_FIL "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig."
+ #define(length = 20, lines = 8) MSG_CLEAN_NOZZLE_E "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig."
+ #define(length = 20, lines = 3) MSG_WAITING_TEMP "Warten auf Abkuehlung von Heater und Bed."
#define MSG_SD_CANT_OPEN_SUBDIR "Kann Unterverz. nicht oeffnen"
#define MSG_SD_INIT_FAIL "SD Init fehlerhaft"
#define MSG_SD_VOL_INIT_FAIL "Dateisystem Init fehlerhaft"
#define MSG_SD_OPENROOT_FAIL "Zugriff auf Basisverzeichnis misslungen"
#define MSG_SD_CARD_OK "SD Karte ok"
#define MSG_SD_WORKDIR_FAIL "Oeffnen Arbeitsverzeichnis misslungen"
#define MSG_SD_OPEN_FILE_FAIL "Fehler beim Oeffnen der Datei: "
#define MSG_SD_FILE_OPENED "Datei geoeffnet: "
#define MSG_SD_FILE_SELECTED "Datei ausgewaehlt"
#define MSG_SD_WRITE_TO_FILE "Schreiben in Datei: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Kein SD Druck"
#define MSG_SD_ERR_WRITE_TO_FILE "Fehler beim Schreiben in Datei"
#define MSG_SD_CANT_ENTER_SUBDIR "Zugangsproblem Unterverzeichnis: "
#define MSG_STEPPER_TOO_HIGH "Schrittrate zu hoch"
#define MSG_ENDSTOPS_HIT "Endanstop erreicht"
#define MSG_ERR_COLD_EXTRUDE_STOP "Stop, Extruder kalt!"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Z wurde eingestellt"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Menuestruktur fehlerhaft"
+ #define(length = 20, lines = 2) MSG_FILAMENT_CLEAN "Ist Farbe rein?"
+ #define(lenght = 20, lines = 1) MSG_UNLOADING_FILAMENT "Filament auswerfen"
+ #define(length = 20, lines = 8) MSG_PAPER "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einklemmt, Drucker sofort ausschalten"
+
+#define MSG_BED_CORRECTION_MENU "Bed level Korrekt"
#define MSG_LANGUAGE_NAME "Deutsch"
#define MSG_LANGUAGE_SELECT "Waehle Sprache"
#define MSG_PRUSA3D "prusa3d.com"
#define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
+ #define MSG_BED_CORRECTION_LEFT "Links [um]"
+ #define MSG_BED_CORRECTION_RIGHT "Rechts [um]"
+ #define MSG_BED_CORRECTION_FRONT "Vorne [um]"
+ #define MSG_BED_CORRECTION_REAR "Hinten [um]"
+ #define MSG_BED_CORRECTION_RESET "Ruecksetzen"
+
+#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
+ #define MSG_MENU_CALIBRATION "Kalibrierung"
#define MSG_SELFTEST_ERROR "Selbsttest Fehler !"
#define MSG_SELFTEST_PLEASECHECK "Bitte pruefe:"
#define MSG_SELFTEST_NOTCONNECTED "Nicht angeschlossen"
#define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
#define MSG_SELFTEST_BEDHEATER "Bed / Heater"
#define MSG_SELFTEST_WIRINGERROR "Verdrahtungsfehler"
#define MSG_SELFTEST_ENDSTOPS "Endschalter"
#define MSG_SELFTEST_MOTOR "Motor"
#define MSG_SELFTEST_ENDSTOP "Endstop"
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Endsch. n. erreicht"
#define MSG_SELFTEST_OK "Selbsttest OK"
#define MSG_LOOSE_PULLEY "Loser pulley"
+ #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD Karte [normal]"
+ #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD Karte [FlashAir]"
#define MSG_SELFTEST_FAN "Lueftertest";
#define MSG_SELFTEST_COOLING_FAN "Vorderer Luefter?";
#define MSG_SELFTEST_EXTRUDER_FAN "Linker Luefter?";
#define MSG_SELFTEST_FAN_YES "Dreht";
#define MSG_SELFTEST_FAN_NO "Dreht nicht";
#define MSG_STATS_TOTALFILAMENT "Filament Gesamt:"
#define MSG_STATS_TOTALPRINTTIME "Totale Druckzeit:"
#define MSG_STATS_FILAMENTUSED "Filamentverbrauch:"
#define MSG_STATS_PRINTTIME "Druckzeit: "
#define MSG_SELFTEST_START "Selbsttest start "
#define MSG_SELFTEST_CHECK_ENDSTOPS "Pruefe Endschalter "
#define MSG_SELFTEST_CHECK_HOTEND "Pruefe Hotend"
#define MSG_SELFTEST_CHECK_X "Pruefe X Achse "
#define MSG_SELFTEST_CHECK_Y "Pruefe Y Achse "
#define MSG_SELFTEST_CHECK_Z "Pruefe Z Achse "
#define MSG_SELFTEST_CHECK_BED "Pruefe Bett "
#define MSG_SELFTEST_CHECK_ALLCORRECT "Alles richtig "
#define MSG_SELFTEST "Selbsttest "
#define MSG_SELFTEST_FAILED "Selbsttest misluekt"
#define MSG_STATISTICS "Statistiken "
#define MSG_USB_PRINTING "Drucken ueber USB"
#define MSG_HOMEYZ "Kalibrieren Z"
#define MSG_HOMEYZ_PROGRESS "Kalibriere Z"
#define MSG_HOMEYZ_DONE "Kalibrierung OK"
#define MSG_SHOW_END_STOPS "Anzeigen Enschalter"
#define MSG_CALIBRATE_BED "Kalibrierung XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ Kalibr."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrieren von XYZ. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrieren von Z. Drehen Sie den Knopf, bis beide Z-Schlitten obere Anschaege erreichen. Klicken wenn beide ganz oben sind."
#define MSG_FINISHING_MOVEMENTS "Bewegung beenden"
#define MSG_PRINT_PAUSED "Druck pausiert"
@ -285,42 +215,127 @@
#define MSG_SET_TEMPERATURE "Temp. einsetzen"
#define MSG_PID_FINISHED "PID Kalib. fertig"
#define MSG_PID_RUNNING "PID Kalib."
#define(length=20, lines=1) MSG_PID_BED "PID Bett Kalibrier. "
#define(length=20, lines=1) MSG_PID_BED_FINISHED "PID Bett Kal. fertig"
#define(length=20, lines=1) MSG_PID_BED_RUNNING "PID Bett Kal."
#define MSG_CONFIRM_NOZZLE_CLEAN "Bitte reinigen Sie die Duese vor Kalibrierung. Klicken wenn sauber."
#define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Sind beide Z Schlitten ganz oben?"
#define MSG_CALIBRATE_PINDA "Kalibrieren"
#define MSG_CALIBRATION_PINDA_MENU "Temp. kalibrieren"
#define MSG_PINDA_NOT_CALIBRATED "Temperatur wurde nicht kalibriert"
#define MSG_PINDA_PREHEAT "PINDA erwaermen"
#define MSG_TEMP_CALIBRATION "Temp Kalib. "
#define MSG_TEMP_CALIBRATION_DONE "Temp. Kalibrierung fertig. Klicken um weiter zu gehen."
#define MSG_TEMP_CALIBRATION_ON "Temp. Kal. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "Temp. Kal. [OFF]"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Suche Bett Kalibrierpunkt"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " von 4"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Genauigkeit verbessern bei Kalibrierpunkt"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " von 9"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Messen der Referenzhoehe des Kalibrierpunktes"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " von 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Wiederholung "
#define MSG_LOAD_ALL "Alle laden"
#define MSG_LOAD_FILAMENT_1 "Filament 1 laden"
#define MSG_LOAD_FILAMENT_2 "Filament 2 laden"
#define MSG_LOAD_FILAMENT_3 "Filament 3 laden"
#define MSG_LOAD_FILAMENT_4 "Filament 4 laden"
#define MSG_UNLOAD_FILAMENT_1 "Filam. 1 entladen"
#define MSG_UNLOAD_FILAMENT_2 "Filam. 2 entladen"
#define MSG_UNLOAD_FILAMENT_3 "Filam. 3 entladen"
#define MSG_UNLOAD_FILAMENT_4 "Filam. 4 entladen"
#define MSG_UNLOAD_ALL "Alles entladen"
#define MSG_PREPARE_FILAMENT "Filam. bereithalten"
#define MSG_ALL "Alle"
#define MSG_USED "Beim Druck benutzte"
#define MSG_CURRENT "Aktuelles"
#define MSG_CHOOSE_EXTRUDER "Waehlen Sie Extruder"
#define MSG_EXTRUDER "Extruder"
#define MSG_EXTRUDER_1 "Extruder 1"
#define MSG_EXTRUDER_2 "Extruder 2"
#define MSG_EXTRUDER_3 "Extruder 3"
#define MSG_EXTRUDER_4 "Extruder 4"
#define MSG_DATE "Datum"
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden."
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ-Kalibrierung ok. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ-Kalibrierung ok. X/Y-Achsen sind etwas schief. Schiefheit wird automatisch korrigiert. Gut gemacht!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ-Kalibrierung ok. X/Y-Achsen sind sehr schief. Schiefheit wird automatisch korrigiert."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ-Kalibrierung fehlgeschlagen. Linker voderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt nicht erreichbar."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte nicht erreichbar."
#define MSG_BED_LEVELING_FAILED_POINT_LOW "Bett-Nivellierung fehlgeschlagen. Sensor wurde nicht ausgeloest. Schmutzige Duese? Warte auf Reset."
#define MSG_BED_LEVELING_FAILED_POINT_HIGH "Bett-Nivellierung fehlgeschlagen. Sensor wurde zu hoch ausgeloest. Warte auf Reset."
#define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bett-Nivellierung fehlgeschlagen. Sensor nicht angeschlossen oder Kabel defekt. Warte auf Reset."
#define MSG_NEW_FIRMWARE_AVAILABLE "Neue Firmware Version verfuegbar:"
#define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Bitte aktualisieren."
#define MSG_FOLLOW_CALIBRATION_FLOW "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel First steps, Abschnitt Calibration flow."
#define MSG_BABYSTEP_Z_NOT_SET "Der Abstand zwischen der Spitze der Duese und der Druckoberflaeche / Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, Abschnitt First layer calibration."
#define MSG_FILAMENT_LOADING_T0 "Filament in extruder 1 einlegen. Klicken wenn fertig."
#define MSG_FILAMENT_LOADING_T1 "Filament in extruder 2 einlegen. Klicken wenn fertig."
#define MSG_FILAMENT_LOADING_T2 "Filament in extruder 3 einlegen. Klicken wenn fertig."
#define MSG_FILAMENT_LOADING_T3 "Filament in extruder 4 einlegen. Klicken wenn fertig."
#define MSG_CHANGE_EXTR "Wechsel extruder"
#define MSG_FIL_ADJUSTING "Einstellen Filament. Bitte warten."
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn sauber."
#define MSG_CALIBRATE_E "Kalibriere E"
//#define MSG_RESET_CALIBRATE_E "Reset E Cal."
#define MSG_E_CAL_KNOB "Knopf drehen bis die Filamentmarkierung erreicht ist. Klicken wenn fertig."
//#define MSG_FARM_CARD_MENU "Farm mode print"
#define MSG_MARK_FIL "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig."
#define MSG_CLEAN_NOZZLE_E "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig."
#define MSG_WAITING_TEMP "Warten auf Abkuehlung von Duese und Bett."
#define MSG_FILAMENT_CLEAN "Ist Farbe rein?"
#define MSG_UNLOADING_FILAMENT "Filament auswerfen"
#define MSG_PAPER "Lege waehrend der Kalibrierung der ersten 4 Punkte ein Blatt Papier unter die Duese. Wenn die Duese das Papier bewegt, Drucker sofort ausschalten!"
#define MSG_BED_CORRECTION_MENU "Bett level korrekt"
#define MSG_BED_CORRECTION_LEFT "Links [um]"
#define MSG_BED_CORRECTION_RIGHT "Rechts [um]"
#define MSG_BED_CORRECTION_FRONT "Vorne [um]"
#define MSG_BED_CORRECTION_REAR "Hinten [um]"
#define MSG_BED_CORRECTION_RESET "Zuruecksetzen"
#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
#define MSG_MENU_CALIBRATION "Kalibrierung"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD Karte [normal]"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD Karte [FlashAir]"
#define MSG_PRINTER_DISCONNECTED "Drucker getrent"
#define MSG_FINISHING_MOVEMENTS "Bewegungen beenden"
#define MSG_PRINT_PAUSED "Druck pausiert"
#define MSG_RESUMING_PRINT "Druck fortsetzen"
#define MSG_PID_EXTRUDER "PID Kalibrierung"
#define MSG_SET_TEMPERATURE "Temp.einstellen"
#define MSG_PID_FINISHED "PID Kal. fertig "
#define MSG_PID_RUNNING "PID Kal. "
#define MSG_CALIBRATE_PINDA "PINDA Temp. Kal."
#define MSG_CALIBRATION_PINDA_MENU "PINDA Temp. Kal."
#define MSG_PINDA_NOT_CALIBRATED "PINDA Temperatur Kalibrierung wurde noch nicht ausgefuehrt"
#define MSG_PINDA_PREHEAT "PINDA erwaermen"
#define MSG_TEMP_CALIBRATION "PINDA Temp.Kal. "
#define MSG_TEMP_CALIBRATION_DONE "Die PINDA Temperaturkalibrierung ist beendet. Klicke um fortzufahren."
#define MSG_TEMP_CALIBRATION_ON "PINDA T.Kal. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "PINDA T.Kal.[OFF]"
#define MSG_LOAD_ALL "Alle laden"
#define MSG_LOAD_FILAMENT_1 "Filament 1 laden"
#define MSG_LOAD_FILAMENT_2 "Filament 2 laden"
#define MSG_LOAD_FILAMENT_3 "Filament 3 laden"
#define MSG_LOAD_FILAMENT_4 "Filament 4 laden"
#define MSG_UNLOAD_FILAMENT_1 "Filam. 1 entladen"
#define MSG_UNLOAD_FILAMENT_2 "Filam. 2 entladen"
#define MSG_UNLOAD_FILAMENT_3 "Filam. 3 entladen"
#define MSG_UNLOAD_FILAMENT_4 "Filam. 4 entladen"
#define MSG_UNLOAD_ALL "Alles entladen"
#define MSG_PREPARE_FILAMENT "Filam. bereithalten"
#define MSG_ALL "Alle"
#define MSG_USED "Benutzt beim Druck"
#define MSG_CURRENT "Aktuelles"
#define MSG_CHOOSE_EXTRUDER "Waehlen Sie Extruder"
#define MSG_EXTRUDER "Extruder"
#define MSG_EXTRUDER_1 "Extruder 1"
#define MSG_EXTRUDER_2 "Extruder 2"
#define MSG_EXTRUDER_3 "Extruder 3"
#define MSG_EXTRUDER_4 "Extruder 4"
#define MSG_DATE "Datum:"
#define MSG_XYZ_DETAILS "XYZ Kal. Details"
#define MSG_Y_DISTANCE_FROM_MIN "Y Entfernung vom min"
#define MSG_Y_DISTANCE_FROM_MIN "Y Entfernung von min"
#define MSG_LEFT "Links:"
#define MSG_CENTER "Mitte:"
#define MSG_RIGHT "Rechts:"
#define MSG_MEASURED_SKEW "Schraeglauf:"
#define MSG_SLIGHT_SKEW "Leichter Schr.:"
#define MSG_SEVERE_SKEW "Schwerer Schr.:"
#define MSG_MEASURED_SKEW "Symmetrie:"
#define MSG_SLIGHT_SKEW "Geringe Asym.:"
#define MSG_SEVERE_SKEW "Schwere Asym.:"
#define MSG_DEFAULT_SETTINGS_LOADED "Standardeinstellungen geladen"
#define MSG_SORT_TIME "Sort: [Zeit]"
#define MSG_SORT_ALPHA "Sort: [Alphabet]"
#define MSG_SORT_NONE "Sort: [Keine]"
#define MSG_SORTING "Sortiere Dateien"

5
Firmware/language_en.h
View File

@ -288,6 +288,9 @@
#define(length=20, lines=1) MSG_SET_TEMPERATURE "Set temperature:"
#define(length=20, lines=1) MSG_PID_FINISHED "PID cal. finished "
#define(length=20, lines=1) MSG_PID_RUNNING "PID cal. "
#define(length=20, lines=1) MSG_PID_BED "PID bed cal. "
#define(length=20, lines=1) MSG_PID_BED_FINISHED "PID bed cal. done "
#define(length=20, lines=1) MSG_PID_BED_RUNNING "PID bed cal. "
#define(length=20, lines=1) MSG_CALIBRATE_PINDA "PINDA Temp. cal."
#define(length=20, lines=1) MSG_CALIBRATION_PINDA_MENU "PINDA Temp. cal."
@ -327,4 +330,4 @@
#define(length=20) MSG_ENDSTOPPULLUP_FIL_RUNOUT_ON "FR Pullup [ON]"
#define(length=20) MSG_ENDSTOPPULLUP_FIL_RUNOUT_OFF "FR Pullup [OFF]"
#define(length=20) MSG_FIL_RUNOUT_INVERTING_OFF "FR_Sens[S to VCC]"
#define(length=20) MSG_FIL_RUNOUT_INVERTING_ON "FR_Sens[S to GND]"
#define(length=20) MSG_FIL_RUNOUT_INVERTING_ON "FR_Sens[S to GND]"

2
Firmware/pins.h
View File

@ -67,7 +67,6 @@
#define E_MUX0_PIN 17
#define E_MUX1_PIN 16
#define E_MUX2_PIN 84
#endif
@ -231,7 +230,6 @@
#define E_MUX0_PIN 17
#define E_MUX1_PIN 16
#define E_MUX2_PIN 84
#endif

78
Firmware/ultralcd.cpp
View File

@ -120,6 +120,7 @@ bool printer_connected = true;
unsigned long display_time; //just timer for showing pid finished message on lcd;
float pid_temp = DEFAULT_PID_TEMP;
float pid_bed_temp = DEFAULT_PID_BED_TEMP;
bool long_press_active = false;
long long_press_timer = millis();
@ -736,6 +737,9 @@ void lcd_commands()
#else
lcd_commands_step = 5;
#endif
#ifdef DEFAULT_PID_BED_TEMP
lcd_commands_step = lcd_commands_step+1;
#endif
}
}
@ -780,7 +784,49 @@ void lcd_commands()
lcd_commands_type = 0;
}
}
#ifdef DEFAULT_PID_BED_TEMP
if (lcd_commands_type == LCD_COMMAND_PID_BED) {
char cmd1[30];
if (lcd_commands_step == 0) {
custom_message_type = 3;
custom_message_state = 1;
custom_message = true;
lcdDrawUpdate = 3;
lcd_commands_step = 3;
}
if (lcd_commands_step == 3 && !blocks_queued()) { //PID calibration
strcpy(cmd1, "M303 E-1 S");
strcat(cmd1, ftostr3(pid_bed_temp));
enquecommand(cmd1);
lcd_setstatuspgm(MSG_PID_BED_RUNNING);
lcd_commands_step = 2;
}
if (lcd_commands_step == 2 && pid_tuning_finished) { //saving to eeprom
pid_tuning_finished = false;
custom_message_state = 0;
lcd_setstatuspgm(MSG_PID_BED_FINISHED);
strcpy(cmd1, "M304 P");
strcat(cmd1, ftostr32(_Kp));
strcat(cmd1, " I");
strcat(cmd1, ftostr32(_Ki));
strcat(cmd1, " D");
strcat(cmd1, ftostr32(_Kd));
enquecommand(cmd1);
enquecommand_P(PSTR("M500"));
display_time = millis();
lcd_commands_step = 1;
}
if ((lcd_commands_step == 1) && ((millis()- display_time)>2000)) { //calibration finished message
lcd_setstatuspgm(WELCOME_MSG);
custom_message_type = 0;
custom_message = false;
pid_temp = DEFAULT_PID_BED_TEMP;
lcd_commands_step = 0;
lcd_commands_type = 0;
}
}
#endif
}
@ -1598,6 +1644,26 @@ void pid_extruder() {
}
}
#ifdef DEFAULT_PID_BED_TEMP
void pid_bed() {
lcd_implementation_clear();
lcd.setCursor(1, 0);
lcd_printPGM(MSG_SET_TEMPERATURE);
pid_bed_temp += int(encoderPosition);
if (pid_bed_temp > BED_MAXTEMP) pid_bed_temp = BED_MAXTEMP;
if (pid_bed_temp < BED_MINTEMP) pid_bed_temp = BED_MINTEMP;
encoderPosition = 0;
lcd.setCursor(1, 2);
lcd.print(ftostr3(pid_bed_temp));
if (lcd_clicked()) {
lcd_commands_type = LCD_COMMAND_PID_BED;
lcd_return_to_status();
lcd_update(2);
}
}
#endif
void lcd_adjust_z() {
int enc_dif = 0;
@ -2754,6 +2820,9 @@ MENU_ITEM(function, MSG_CALIBRATE_BED, lcd_mesh_calibration);
MENU_ITEM(submenu, MSG_CALIBRATION_PINDA_MENU, lcd_pinda_calibration_menu);
#endif //MK1BP
MENU_ITEM(submenu, MSG_PID_EXTRUDER, pid_extruder);
#ifdef DEFAULT_PID_BED_TEMP
MENU_ITEM(submenu, MSG_PID_BED, pid_bed);
#endif
MENU_ITEM(submenu, MSG_SHOW_END_STOPS, menu_show_end_stops);
#ifndef MK1BP
MENU_ITEM(gcode, MSG_CALIBRATE_BED_RESET, PSTR("M44"));
@ -3335,31 +3404,26 @@ void change_extr(int extr) { //switches multiplexer for extruders
pinMode(E_MUX0_PIN, OUTPUT);
pinMode(E_MUX1_PIN, OUTPUT);
pinMode(E_MUX2_PIN, OUTPUT);
switch (extr) {
case 1:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, LOW);
WRITE(E_MUX2_PIN, LOW);
break;
case 2:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, HIGH);
WRITE(E_MUX2_PIN, LOW);
break;
case 3:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, HIGH);
WRITE(E_MUX2_PIN, LOW);
break;
default:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, LOW);
WRITE(E_MUX2_PIN, LOW);
break;
}
@ -3367,7 +3431,7 @@ void change_extr(int extr) { //switches multiplexer for extruders
}
static int get_ext_nr() { //reads multiplexer input pins and return current extruder number (counted from 0)
return(4 * READ(E_MUX2_PIN) + 2 * READ(E_MUX1_PIN) + READ(E_MUX0_PIN));
return(2 * READ(E_MUX1_PIN) + READ(E_MUX0_PIN));
}

3
Firmware/ultralcd.h
View File

@ -95,6 +95,9 @@ void lcd_mylang();
#define LCD_COMMAND_LONG_PAUSE 5
#define LCD_COMMAND_LONG_PAUSE_RESUME 6
#define LCD_COMMAND_PID_EXTRUDER 7
#ifdef DEFAULT_PID_BED_TEMP
#define LCD_COMMAND_PID_BED 8
#endif
extern unsigned long lcd_timeoutToStatus;
extern int lcd_commands_type;

4
Firmware/ultralcd_implementation_hitachi_HD44780.h
View File

@ -974,7 +974,7 @@ static void lcd_implementation_status_screen()
if (custom_message_type == 3) {
lcd.print(lcd_status_message);
if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
lcd.setCursor(10, 3);
lcd.setCursor(15, 3);
lcd.print(itostr3(pid_cycle));
lcd.print('/');
@ -986,7 +986,7 @@ static void lcd_implementation_status_screen()
char progress[4];
lcd.setCursor(0, 3);
lcd_printPGM(MSG_TEMP_CALIBRATION);
lcd.setCursor(12, 3);
lcd.setCursor(15, 3);
sprintf(progress, "%d/6", custom_message_state);
lcd.print(progress);
}

1
Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
View File

@ -395,6 +395,7 @@ THERMISTORS SETTINGS
#define BUTTON_BLANKING_TIME 200 //time in ms for blanking after button release
#define DEFAULT_PID_TEMP 210
#define DEFAULT_PID_BED_TEMP 55
#ifdef SNMM
#define DEFAULT_RETRACTION 4 //used for PINDA temp calibration and pause print