Lang - text "ok" removed from dictionary

Firmware/Marlin_main.cpp

@@ -627,7 +627,7 @@ void crashdet_cancel()
 		lcd_print_stop();
 	}else if(saved_printing_type == PRINTING_TYPE_USB){
 		SERIAL_ECHOLNPGM("// action:cancel"); //for Octoprint: works the same as clicking "Abort" button in Octoprint GUI
-		SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
+		SERIAL_PROTOCOLLNRPGM(MSG_OK);
 	}
 }
 
@@ -1744,7 +1744,7 @@ void loop()
           if(card.logging)
             process_commands();
           else
-           SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
+           SERIAL_PROTOCOLLNRPGM(MSG_OK);
         } else {
           card.closefile();
           SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED);
@@ -6188,7 +6188,7 @@ Sigma_Exit:
           }
         }
         else if (servo_index >= 0) {
-          SERIAL_PROTOCOL(_T(MSG_OK));
+          SERIAL_PROTOCOL(MSG_OK);
           SERIAL_PROTOCOL(" Servo ");
           SERIAL_PROTOCOL(servo_index);
           SERIAL_PROTOCOL(": ");
@@ -6233,7 +6233,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
         #endif
 
         updatePID();
-        SERIAL_PROTOCOLRPGM(_T(MSG_OK));
+        SERIAL_PROTOCOLRPGM(MSG_OK);
         SERIAL_PROTOCOL(" p:");
         SERIAL_PROTOCOL(cs.Kp);
         SERIAL_PROTOCOL(" i:");
@@ -6257,7 +6257,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
         if(code_seen('D')) cs.bedKd = scalePID_d(code_value());
 
         updatePID();
-       	SERIAL_PROTOCOLRPGM(_T(MSG_OK));
+       	SERIAL_PROTOCOLRPGM(MSG_OK);
         SERIAL_PROTOCOL(" p:");
         SERIAL_PROTOCOL(cs.bedKp);
         SERIAL_PROTOCOL(" i:");
@@ -6389,7 +6389,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
         {
           cs.zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp
           SERIAL_ECHO_START;
-          SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", _T(MSG_OK),PSTR("")));
+          SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", MSG_OK,PSTR("")));
           SERIAL_PROTOCOLLN("");
         }
         else
@@ -6543,7 +6543,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
 			manage_inactivity();
 			lcd_update(0);
 		}
-		LCD_MESSAGERPGM(_T(MSG_OK));
+		LCD_MESSAGERPGM(MSG_OK);
 
 		break;
 	}
@@ -7079,7 +7079,7 @@ void FlushSerialRequestResend()
 {
   //char cmdbuffer[bufindr][100]="Resend:";
   MYSERIAL.flush();
-  printf_P(_N("%S: %ld\n%S\n"), _i("Resend"), gcode_LastN + 1, _T(MSG_OK));
+  printf_P(_N("%S: %ld\n%S\n"), _i("Resend"), gcode_LastN + 1, MSG_OK);
 }
 
 // Confirm the execution of a command, if sent from a serial line.
@@ -7088,7 +7088,7 @@ void ClearToSend()
 {
     previous_millis_cmd = millis();
 	if ((CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB) || (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR)) 
-		SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
+		SERIAL_PROTOCOLLNRPGM(MSG_OK);
 }
 
 #if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3

Firmware/messages.c

@@ -60,7 +60,6 @@ const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[] PROGMEM_I1 = ISTR(" of 9");
 const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////c=0 r=0
 const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////c=0 r=0
 const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=0 r=0
-const char MSG_OK[] PROGMEM_I1 = ISTR("ok"); ////c=0 r=0
 const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8
 const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4
 const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20 r=0
@@ -122,3 +121,4 @@ const char MSG_TMC_OVERTEMP[] PROGMEM_N1 = "TMC DRIVER OVERTEMP"; ////c=0 r=0
 const char MSG_Enqueing[] PROGMEM_N1 = "enqueing \""; ////c=0 r=0
 const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////c=0 r=0
 const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////c=0 r=0
+const char MSG_OK[] PROGMEM_N1 = "ok"; ////c=0 r=0

Firmware/messages.h

@@ -61,7 +61,6 @@ extern const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[];
 extern const char MSG_MENU_CALIBRATION[];
 extern const char MSG_NO[];
 extern const char MSG_NOZZLE[];
-extern const char MSG_OK[];
 extern const char MSG_PAPER[];
 extern const char MSG_PLACE_STEEL_SHEET[];
 extern const char MSG_PLEASE_WAIT[];
@@ -123,6 +122,7 @@ extern const char MSG_TMC_OVERTEMP[];
 extern const char MSG_Enqueing[];
 extern const char MSG_ENDSTOPS_HIT[];
 extern const char MSG_SD_ERR_WRITE_TO_FILE[];
+extern const char MSG_OK[];
 
 #if defined(__cplusplus)
 }

lang/lang_en.txt

@@ -553,9 +553,6 @@
 #MSG_NOZZLE c=0 r=0
 "Nozzle"
 
-#MSG_OK c=0 r=0
-"ok"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 

lang/lang_en_cz.txt

@@ -738,10 +738,6 @@
 "Nozzle"
 "Tryska"
 
-#MSG_OK c=0 r=0
-"ok"
-"\x00"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."

lang/lang_en_de.txt

@@ -738,10 +738,6 @@
 "Nozzle"
 "Duese"
 
-#MSG_OK c=0 r=0
-"ok"
-"\x00"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 "Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt."

lang/lang_en_es.txt

@@ -738,10 +738,6 @@
 "Nozzle"
 "Boquilla"
 
-#MSG_OK c=0 r=0
-"ok"
-"\x00"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"

lang/lang_en_fr.txt

@@ -738,10 +738,6 @@
 "Nozzle"
 "Buse"
 
-#MSG_OK c=0 r=0
-"ok"
-"\x00"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront pris."

lang/lang_en_it.txt

@@ -738,10 +738,6 @@
 "Nozzle"
 "Ugello"
 
-#MSG_OK c=0 r=0
-"ok"
-"\x00"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 "Sono state trovate impostazioni vecchie. I valori di default di PID, Esteps etc. saranno impostati"

lang/lang_en_pl.txt

@@ -738,10 +738,6 @@
 "Nozzle"
 "Dysza"
 
-#MSG_OK c=0 r=0
-"ok"
-"\x00"
-
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 "Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, itp."