Update language messages

Firmware/language_all.cpp

@@ -554,28 +554,34 @@ const char * const MSG_CALIBRATE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_CALIBRATE_PINDA_EN[] PROGMEM = "PINDA Temp. cal.";
 const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
+const char MSG_CALIBRATE_PINDA_IT[] PROGMEM = "Calibrare";
+const char MSG_CALIBRATE_PINDA_ES[] PROGMEM = "Calibrar";
+const char MSG_CALIBRATE_PINDA_PL[] PROGMEM = "Skalibrowac";
 const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "PINDA Temp. Kal.";
 const char MSG_CALIBRATE_PINDA_NL[] PROGMEM = "PINDA Temp. kal.";
 const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_CALIBRATE_PINDA_EN,
 	MSG_CALIBRATE_PINDA_CZ,
-	MSG_CALIBRATE_PINDA_EN,
+	MSG_CALIBRATE_PINDA_IT,
-	MSG_CALIBRATE_PINDA_EN,
+	MSG_CALIBRATE_PINDA_ES,
-	MSG_CALIBRATE_PINDA_EN,
+	MSG_CALIBRATE_PINDA_PL,
 	MSG_CALIBRATE_PINDA_DE,
 	MSG_CALIBRATE_PINDA_NL
 };
 
 const char MSG_CALIBRATION_PINDA_MENU_EN[] PROGMEM = "PINDA Temp. cal.";
-const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplotni kalibrace";
+const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplot. kalibrace";
+const char MSG_CALIBRATION_PINDA_MENU_IT[] PROGMEM = "Taratura temp.";
+const char MSG_CALIBRATION_PINDA_MENU_ES[] PROGMEM = "Calibracion temp.";
+const char MSG_CALIBRATION_PINDA_MENU_PL[] PROGMEM = "Cieplna kalibr.";
 const char MSG_CALIBRATION_PINDA_MENU_DE[] PROGMEM = "PINDA Temp. Kal.";
 const char MSG_CALIBRATION_PINDA_MENU_NL[] PROGMEM = "PINDA Temp. kal.";
 const char * const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_CALIBRATION_PINDA_MENU_EN,
 	MSG_CALIBRATION_PINDA_MENU_CZ,
-	MSG_CALIBRATION_PINDA_MENU_EN,
+	MSG_CALIBRATION_PINDA_MENU_IT,
-	MSG_CALIBRATION_PINDA_MENU_EN,
+	MSG_CALIBRATION_PINDA_MENU_ES,
-	MSG_CALIBRATION_PINDA_MENU_EN,
+	MSG_CALIBRATION_PINDA_MENU_PL,
 	MSG_CALIBRATION_PINDA_MENU_DE,
 	MSG_CALIBRATION_PINDA_MENU_NL
 };
@@ -1067,47 +1073,41 @@ const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
 };
 
 const char MSG_FIL_LOADED_CHECK_EN[] PROGMEM = "Is filament loaded?";
-const char MSG_FIL_LOADED_CHECK_CZ[] PROGMEM = "Je filament zaveden?";
-const char MSG_FIL_LOADED_CHECK_IT[] PROGMEM = "Filamento caricato?";
-const char MSG_FIL_LOADED_CHECK_ES[] PROGMEM = "Esta cargado el filamento?";
-const char MSG_FIL_LOADED_CHECK_PL[] PROGMEM = "Czy filament jest wprowadzony?";
 const char MSG_FIL_LOADED_CHECK_DE[] PROGMEM = "Ist Filament eingelegt?";
 const char MSG_FIL_LOADED_CHECK_NL[] PROGMEM = "Is filament ingestoken?";
 const char * const MSG_FIL_LOADED_CHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_FIL_LOADED_CHECK_EN,
-	MSG_FIL_LOADED_CHECK_CZ,
+	MSG_FIL_LOADED_CHECK_EN,
-	MSG_FIL_LOADED_CHECK_IT,
+	MSG_FIL_LOADED_CHECK_EN,
-	MSG_FIL_LOADED_CHECK_ES,
+	MSG_FIL_LOADED_CHECK_EN,
-	MSG_FIL_LOADED_CHECK_PL,
+	MSG_FIL_LOADED_CHECK_EN,
 	MSG_FIL_LOADED_CHECK_DE,
 	MSG_FIL_LOADED_CHECK_NL
 };
 
 const char MSG_FIL_TUNING_EN[] PROGMEM = "Rotate the knob to adjust filament.";
-const char MSG_FIL_TUNING_CZ[] PROGMEM = "Otacenim tlacitka doladte pozici filamentu.";
-const char MSG_FIL_TUNING_IT[] PROGMEM = "Girare la manopola per regolare il filamento";
-const char MSG_FIL_TUNING_ES[] PROGMEM = "Rotar el mando para ajustar el filamento.";
-const char MSG_FIL_TUNING_PL[] PROGMEM = "Obrotem przycisku dostroj pozycje filamentu.";
 const char MSG_FIL_TUNING_DE[] PROGMEM = "Knopf drehen um Filament einzustellen.";
 const char MSG_FIL_TUNING_NL[] PROGMEM = "Knop draaien om filament in te stellen.";
 const char * const MSG_FIL_TUNING_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_FIL_TUNING_EN,
-	MSG_FIL_TUNING_CZ,
+	MSG_FIL_TUNING_EN,
-	MSG_FIL_TUNING_IT,
+	MSG_FIL_TUNING_EN,
-	MSG_FIL_TUNING_ES,
+	MSG_FIL_TUNING_EN,
-	MSG_FIL_TUNING_PL,
+	MSG_FIL_TUNING_EN,
 	MSG_FIL_TUNING_DE,
 	MSG_FIL_TUNING_NL
 };
 
 const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN[] PROGMEM = "Iteration ";
+const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ[] PROGMEM = "Iterace ";
+const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES[] PROGMEM = "Iteracion ";
 const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE[] PROGMEM = "Wiederholung ";
 const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_NL[] PROGMEM = "Herhaling ";
 const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
+	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
-	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
+	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES,
-	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_NL
@@ -1149,14 +1149,17 @@ const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGM
 
 const char MSG_FINISHING_MOVEMENTS_EN[] PROGMEM = "Finishing movements";
 const char MSG_FINISHING_MOVEMENTS_CZ[] PROGMEM = "Dokoncovani pohybu";
+const char MSG_FINISHING_MOVEMENTS_IT[] PROGMEM = "Arresto in corso";
+const char MSG_FINISHING_MOVEMENTS_ES[] PROGMEM = "Term. movimientos";
+const char MSG_FINISHING_MOVEMENTS_PL[] PROGMEM = "Konczenie druku";
 const char MSG_FINISHING_MOVEMENTS_DE[] PROGMEM = "Bewegungen beenden";
 const char MSG_FINISHING_MOVEMENTS_NL[] PROGMEM = "Bewegingen afwerken";
 const char * const MSG_FINISHING_MOVEMENTS_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_FINISHING_MOVEMENTS_EN,
 	MSG_FINISHING_MOVEMENTS_CZ,
-	MSG_FINISHING_MOVEMENTS_EN,
+	MSG_FINISHING_MOVEMENTS_IT,
-	MSG_FINISHING_MOVEMENTS_EN,
+	MSG_FINISHING_MOVEMENTS_ES,
-	MSG_FINISHING_MOVEMENTS_EN,
+	MSG_FINISHING_MOVEMENTS_PL,
 	MSG_FINISHING_MOVEMENTS_DE,
 	MSG_FINISHING_MOVEMENTS_NL
 };
@@ -1976,70 +1979,85 @@ const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_PID_EXTRUDER_EN[] PROGMEM = "PID calibration";
 const char MSG_PID_EXTRUDER_CZ[] PROGMEM = "PID kalibrace";
+const char MSG_PID_EXTRUDER_IT[] PROGMEM = "Calibrazione PID";
+const char MSG_PID_EXTRUDER_ES[] PROGMEM = "Calibracion PID";
+const char MSG_PID_EXTRUDER_PL[] PROGMEM = "Kalibracja PID";
 const char MSG_PID_EXTRUDER_DE[] PROGMEM = "PID Kalibrierung";
 const char MSG_PID_EXTRUDER_NL[] PROGMEM = "PID Kalibratie";
 const char * const MSG_PID_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PID_EXTRUDER_EN,
 	MSG_PID_EXTRUDER_CZ,
-	MSG_PID_EXTRUDER_EN,
+	MSG_PID_EXTRUDER_IT,
-	MSG_PID_EXTRUDER_EN,
+	MSG_PID_EXTRUDER_ES,
-	MSG_PID_EXTRUDER_EN,
+	MSG_PID_EXTRUDER_PL,
 	MSG_PID_EXTRUDER_DE,
 	MSG_PID_EXTRUDER_NL
 };
 
 const char MSG_PID_FINISHED_EN[] PROGMEM = "PID cal. finished";
 const char MSG_PID_FINISHED_CZ[] PROGMEM = "PID kal. ukoncena";
+const char MSG_PID_FINISHED_IT[] PROGMEM = "Cal. PID completa";
+const char MSG_PID_FINISHED_ES[] PROGMEM = "Cal. PID terminada";
+const char MSG_PID_FINISHED_PL[] PROGMEM = "Kal. PID zakonczona";
 const char MSG_PID_FINISHED_DE[] PROGMEM = "PID Kal. fertig";
 const char MSG_PID_FINISHED_NL[] PROGMEM = "PID kal. klaar";
 const char * const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PID_FINISHED_EN,
 	MSG_PID_FINISHED_CZ,
-	MSG_PID_FINISHED_EN,
+	MSG_PID_FINISHED_IT,
-	MSG_PID_FINISHED_EN,
+	MSG_PID_FINISHED_ES,
-	MSG_PID_FINISHED_EN,
+	MSG_PID_FINISHED_PL,
 	MSG_PID_FINISHED_DE,
 	MSG_PID_FINISHED_NL
 };
 
 const char MSG_PID_RUNNING_EN[] PROGMEM = "PID cal.           ";
 const char MSG_PID_RUNNING_CZ[] PROGMEM = "PID kal.           ";
+const char MSG_PID_RUNNING_IT[] PROGMEM = "Cal. PID";
+const char MSG_PID_RUNNING_ES[] PROGMEM = "Cal. PID           ";
+const char MSG_PID_RUNNING_PL[] PROGMEM = "Kal. PID";
 const char MSG_PID_RUNNING_DE[] PROGMEM = "PID Kal.         ";
 const char MSG_PID_RUNNING_NL[] PROGMEM = "PID kal.         ";
 const char * const MSG_PID_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PID_RUNNING_EN,
 	MSG_PID_RUNNING_CZ,
-	MSG_PID_RUNNING_EN,
+	MSG_PID_RUNNING_IT,
-	MSG_PID_RUNNING_EN,
+	MSG_PID_RUNNING_ES,
-	MSG_PID_RUNNING_EN,
+	MSG_PID_RUNNING_PL,
 	MSG_PID_RUNNING_DE,
 	MSG_PID_RUNNING_NL
 };
 
 const char MSG_PINDA_NOT_CALIBRATED_EN[] PROGMEM = "PINDA temperature calibration has not been run yet";
 const char MSG_PINDA_NOT_CALIBRATED_CZ[] PROGMEM = "Tiskarna nebyla teplotne zkalibrovana";
+const char MSG_PINDA_NOT_CALIBRATED_IT[] PROGMEM = "Taratura della temperatura non ancora eseguita";
+const char MSG_PINDA_NOT_CALIBRATED_ES[] PROGMEM = "La temperatura de calibracion no ha sido ajustada";
+const char MSG_PINDA_NOT_CALIBRATED_PL[] PROGMEM = "Cieplna kalibracja nie byla przeprowadzona";
 const char MSG_PINDA_NOT_CALIBRATED_DE[] PROGMEM = "PINDA Temperatur Kalibrierung wurde noch nicht ausgefuehrt";
 const char MSG_PINDA_NOT_CALIBRATED_NL[] PROGMEM = "PINDA temperatuur calibratie was nog niet uitgevoerd";
 const char * const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PINDA_NOT_CALIBRATED_EN,
 	MSG_PINDA_NOT_CALIBRATED_CZ,
-	MSG_PINDA_NOT_CALIBRATED_EN,
+	MSG_PINDA_NOT_CALIBRATED_IT,
-	MSG_PINDA_NOT_CALIBRATED_EN,
+	MSG_PINDA_NOT_CALIBRATED_ES,
-	MSG_PINDA_NOT_CALIBRATED_EN,
+	MSG_PINDA_NOT_CALIBRATED_PL,
 	MSG_PINDA_NOT_CALIBRATED_DE,
 	MSG_PINDA_NOT_CALIBRATED_NL
 };
 
 const char MSG_PINDA_PREHEAT_EN[] PROGMEM = "PINDA Heating";
-const char MSG_PINDA_PREHEAT_CZ[] PROGMEM = "Predehrivani        ";
+const char MSG_PINDA_PREHEAT_CZ[] PROGMEM = "Nahrivani PINDA";
+const char MSG_PINDA_PREHEAT_IT[] PROGMEM = "Riscald. PINDA";
+const char MSG_PINDA_PREHEAT_ES[] PROGMEM = "Calentando PINDA";
+const char MSG_PINDA_PREHEAT_PL[] PROGMEM = "Grzanie PINDA";
 const char MSG_PINDA_PREHEAT_DE[] PROGMEM = "PINDA heizt auf";
 const char MSG_PINDA_PREHEAT_NL[] PROGMEM = "PINDA warmt op";
 const char * const MSG_PINDA_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PINDA_PREHEAT_EN,
 	MSG_PINDA_PREHEAT_CZ,
-	MSG_PINDA_PREHEAT_EN,
+	MSG_PINDA_PREHEAT_IT,
-	MSG_PINDA_PREHEAT_EN,
+	MSG_PINDA_PREHEAT_ES,
-	MSG_PINDA_PREHEAT_EN,
+	MSG_PINDA_PREHEAT_PL,
 	MSG_PINDA_PREHEAT_DE,
 	MSG_PINDA_PREHEAT_NL
 };
@@ -2159,14 +2177,17 @@ const char * const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_PRINT_PAUSED_EN[] PROGMEM = "Print paused";
 const char MSG_PRINT_PAUSED_CZ[] PROGMEM = "Tisk pozastaven";
+const char MSG_PRINT_PAUSED_IT[] PROGMEM = "Stampa in pausa";
+const char MSG_PRINT_PAUSED_ES[] PROGMEM = "Impresion en pausa";
+const char MSG_PRINT_PAUSED_PL[] PROGMEM = "Druk zatrzymany";
 const char MSG_PRINT_PAUSED_DE[] PROGMEM = "Druck pausiert";
 const char MSG_PRINT_PAUSED_NL[] PROGMEM = "Druck pauzeren";
 const char * const MSG_PRINT_PAUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PRINT_PAUSED_EN,
 	MSG_PRINT_PAUSED_CZ,
-	MSG_PRINT_PAUSED_EN,
+	MSG_PRINT_PAUSED_IT,
-	MSG_PRINT_PAUSED_EN,
+	MSG_PRINT_PAUSED_ES,
-	MSG_PRINT_PAUSED_EN,
+	MSG_PRINT_PAUSED_PL,
 	MSG_PRINT_PAUSED_DE,
 	MSG_PRINT_PAUSED_NL
 };
@@ -2288,14 +2309,17 @@ const char * const MSG_RESUMING_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_RESUMING_PRINT_EN[] PROGMEM = "Resuming print";
 const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
+const char MSG_RESUMING_PRINT_IT[] PROGMEM = "Stampa in ripresa";
+const char MSG_RESUMING_PRINT_ES[] PROGMEM = "Reanudar impresion";
+const char MSG_RESUMING_PRINT_PL[] PROGMEM = "Wznawianie druku";
 const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck fortsetzen";
 const char MSG_RESUMING_PRINT_NL[] PROGMEM = "Print hervatten";
 const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_RESUMING_PRINT_EN,
 	MSG_RESUMING_PRINT_CZ,
-	MSG_RESUMING_PRINT_EN,
+	MSG_RESUMING_PRINT_IT,
-	MSG_RESUMING_PRINT_EN,
+	MSG_RESUMING_PRINT_ES,
-	MSG_RESUMING_PRINT_EN,
+	MSG_RESUMING_PRINT_PL,
 	MSG_RESUMING_PRINT_DE,
 	MSG_RESUMING_PRINT_NL
 };
@@ -2854,14 +2878,17 @@ const char * const MSG_SET_ORIGIN_LANG_TABLE[1] PROGMEM = {
 
 const char MSG_SET_TEMPERATURE_EN[] PROGMEM = "Set temperature:";
 const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
+const char MSG_SET_TEMPERATURE_IT[] PROGMEM = "Imposta temperatura";
+const char MSG_SET_TEMPERATURE_ES[] PROGMEM = "Establecer temp.:";
+const char MSG_SET_TEMPERATURE_PL[] PROGMEM = "Ustawic temperature";
 const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp.einstellen";
 const char MSG_SET_TEMPERATURE_NL[] PROGMEM = "Temp. instellen";
 const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SET_TEMPERATURE_EN,
 	MSG_SET_TEMPERATURE_CZ,
-	MSG_SET_TEMPERATURE_EN,
+	MSG_SET_TEMPERATURE_IT,
-	MSG_SET_TEMPERATURE_EN,
+	MSG_SET_TEMPERATURE_ES,
-	MSG_SET_TEMPERATURE_EN,
+	MSG_SET_TEMPERATURE_PL,
 	MSG_SET_TEMPERATURE_DE,
 	MSG_SET_TEMPERATURE_NL
 };
@@ -3148,56 +3175,68 @@ const char * const MSG_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_TEMP_CALIBRATION_EN[] PROGMEM = "PINDA Temp.cal.     ";
 const char MSG_TEMP_CALIBRATION_CZ[] PROGMEM = "Tepl. kal.          ";
+const char MSG_TEMP_CALIBRATION_IT[] PROGMEM = "Cal. temp.          ";
+const char MSG_TEMP_CALIBRATION_ES[] PROGMEM = "Cal. temp.          ";
+const char MSG_TEMP_CALIBRATION_PL[] PROGMEM = "Ciepl. kal.         ";
 const char MSG_TEMP_CALIBRATION_DE[] PROGMEM = "PINDA Temp.Kal.     ";
 const char MSG_TEMP_CALIBRATION_NL[] PROGMEM = "PINDA Temp.kal.";
 const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_EN,
 	MSG_TEMP_CALIBRATION_CZ,
-	MSG_TEMP_CALIBRATION_EN,
+	MSG_TEMP_CALIBRATION_IT,
-	MSG_TEMP_CALIBRATION_EN,
+	MSG_TEMP_CALIBRATION_ES,
-	MSG_TEMP_CALIBRATION_EN,
+	MSG_TEMP_CALIBRATION_PL,
 	MSG_TEMP_CALIBRATION_DE,
 	MSG_TEMP_CALIBRATION_NL
 };
 
 const char MSG_TEMP_CALIBRATION_DONE_EN[] PROGMEM = "PINDA temperature calibration is finished. Click to continue.";
 const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka.";
+const char MSG_TEMP_CALIBRATION_DONE_IT[] PROGMEM = "Taratura temperatura terminata. Fare click per continuare.";
+const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Presionar para continuar.";
+const char MSG_TEMP_CALIBRATION_DONE_PL[] PROGMEM = "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem";
 const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Die PINDA Temperaturkalibrierung ist beendet. Klicke um fortzufahren.";
 const char MSG_TEMP_CALIBRATION_DONE_NL[] PROGMEM = "PINDA temperatuur calibratie is klaar. Klik om door te gaan.";
 const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_DONE_EN,
 	MSG_TEMP_CALIBRATION_DONE_CZ,
-	MSG_TEMP_CALIBRATION_DONE_EN,
+	MSG_TEMP_CALIBRATION_DONE_IT,
-	MSG_TEMP_CALIBRATION_DONE_EN,
+	MSG_TEMP_CALIBRATION_DONE_ES,
-	MSG_TEMP_CALIBRATION_DONE_EN,
+	MSG_TEMP_CALIBRATION_DONE_PL,
 	MSG_TEMP_CALIBRATION_DONE_DE,
 	MSG_TEMP_CALIBRATION_DONE_NL
 };
 
 const char MSG_TEMP_CALIBRATION_OFF_EN[] PROGMEM = "PINDA T.cal.[OFF]";
 const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [OFF]";
+const char MSG_TEMP_CALIBRATION_OFF_IT[] PROGMEM = "Cal. temp. [OFF]";
+const char MSG_TEMP_CALIBRATION_OFF_ES[] PROGMEM = "Cal. temp. [OFF]";
+const char MSG_TEMP_CALIBRATION_OFF_PL[] PROGMEM = "Ciepl. kal. [OFF]";
 const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "PINDA T.Kal.[OFF]";
 const char MSG_TEMP_CALIBRATION_OFF_NL[] PROGMEM = "PINDA T.kal.[OFF]";
 const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_OFF_EN,
 	MSG_TEMP_CALIBRATION_OFF_CZ,
-	MSG_TEMP_CALIBRATION_OFF_EN,
+	MSG_TEMP_CALIBRATION_OFF_IT,
-	MSG_TEMP_CALIBRATION_OFF_EN,
+	MSG_TEMP_CALIBRATION_OFF_ES,
-	MSG_TEMP_CALIBRATION_OFF_EN,
+	MSG_TEMP_CALIBRATION_OFF_PL,
 	MSG_TEMP_CALIBRATION_OFF_DE,
 	MSG_TEMP_CALIBRATION_OFF_NL
 };
 
 const char MSG_TEMP_CALIBRATION_ON_EN[] PROGMEM = "PINDA T.cal. [ON]";
 const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [ON]";
+const char MSG_TEMP_CALIBRATION_ON_IT[] PROGMEM = "Cal. temp. [ON]";
+const char MSG_TEMP_CALIBRATION_ON_ES[] PROGMEM = "Cal. temp. [ON]";
+const char MSG_TEMP_CALIBRATION_ON_PL[] PROGMEM = "Ciepl. kal. [ON]";
 const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "PINDA T.Kal. [ON]";
 const char MSG_TEMP_CALIBRATION_ON_NL[] PROGMEM = "PINDA T.kal. [ON]";
 const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_ON_EN,
 	MSG_TEMP_CALIBRATION_ON_CZ,
-	MSG_TEMP_CALIBRATION_ON_EN,
+	MSG_TEMP_CALIBRATION_ON_IT,
-	MSG_TEMP_CALIBRATION_ON_EN,
+	MSG_TEMP_CALIBRATION_ON_ES,
-	MSG_TEMP_CALIBRATION_ON_EN,
+	MSG_TEMP_CALIBRATION_ON_PL,
 	MSG_TEMP_CALIBRATION_ON_DE,
 	MSG_TEMP_CALIBRATION_ON_NL
 };

Firmware/language_cz.h

@@ -212,6 +212,7 @@
 #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2	" z 9"
 #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1	"Merim referencni vysku kalibracniho bodu"
 #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2	" z 9"
+#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION	"Iterace "
 
 #define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND			"Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
 #define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED			"Kalibrace XYZ selhala. Nahlednete do manualu."
@@ -252,8 +253,7 @@
 #define MSG_FILAMENT_LOADING_T2							"Vložte filament do extruderu 3. Potvrdte tlacitkem."
 #define MSG_FILAMENT_LOADING_T3							"Vložte filament do extruderu 4. Potvrdte tlacitkem."
 #define MSG_CHANGE_EXTR									"Zmenit extruder"
-#define MSG_FIL_LOADED_CHECK							"Je filament zaveden?"
+
-#define MSG_FIL_TUNING									"Otacenim tlacitka doladte pozici filamentu."
 #define MSG_FIL_ADJUSTING								"Probiha srovnani filamentu. Prosim cekejte."
 #define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ				"Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem."
 #define MSG_CALIBRATE_E									"Kalibrovat E"
@@ -275,9 +275,9 @@
 #define MSG_PID_RUNNING									"PID kal.           "
 
 #define MSG_CALIBRATE_PINDA								"Zkalibrovat"
-#define MSG_CALIBRATION_PINDA_MENU						"Teplotni kalibrace"
+#define MSG_CALIBRATION_PINDA_MENU						"Teplot. kalibrace"
 #define MSG_PINDA_NOT_CALIBRATED						"Tiskarna nebyla teplotne zkalibrovana"
-#define MSG_PINDA_PREHEAT								"Predehrivani        "
+#define MSG_PINDA_PREHEAT								"Nahrivani PINDA"
 #define MSG_TEMP_CALIBRATION							"Tepl. kal.          "
 #define MSG_TEMP_CALIBRATION_DONE						"Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka."
 #define MSG_TEMP_CALIBRATION_ON							"Tepl. kal. [ON]"

Firmware/language_en.h

@@ -237,7 +237,6 @@
 #define(length=20, lines=4) MSG_FILAMENT_LOADING_T2							"Insert filament into extruder 3. Click when done."
 #define(length=20, lines=4) MSG_FILAMENT_LOADING_T3							"Insert filament into extruder 4. Click when done."
 #define(length=20, lines=1) MSG_CHANGE_EXTR									"Change extruder"
-
 #define(length=20, lines=2) MSG_FIL_LOADED_CHECK								"Is filament loaded?"
 #define(length=20, lines=3) MSG_FIL_TUNING										"Rotate the knob to adjust filament."
 #define(length=20, lines=4) MSG_FIL_ADJUSTING								"Adjusting filaments. Please wait."

Firmware/language_es.h

@@ -206,6 +206,7 @@
 #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1	"Medir la altura del punto de la calibracion"
 #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2	" de 9"
 
+#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION	"Iteracion "
 #define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND           "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados."
 #define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED            "Calibracion XYZ fallada. Consultar el manual por favor."
 #define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT               "Calibracion XYZ ok. Ejes X/Y perpendiculares. Felicitaciones!"
@@ -242,8 +243,7 @@
 #define MSG_FILAMENT_LOADING_T2							"Insertar filamento en el extrusor 3. Haga clic una vez terminado."
 #define MSG_FILAMENT_LOADING_T3							"Insertar filamento en el extrusor 4. Haga clic una vez terminado."
 #define MSG_CHANGE_EXTR									"Cambiar extrusor."
-#define MSG_FIL_LOADED_CHECK							"Esta cargado el filamento?"
+
-#define MSG_FIL_TUNING									"Rotar el mando para ajustar el filamento."
 #define MSG_FIL_ADJUSTING								"Ajustando filamentos. Esperar por favor."
 #define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ				"Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado."
 #define MSG_CALIBRATE_E									"Calibrar E"
@@ -254,3 +254,20 @@
 #define MSG_FILAMENT_CLEAN								"Es el nuevo color nitido?"
 #define MSG_UNLOADING_FILAMENT							"Soltando filamento"
 #define MSG_PAPER										"Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
+
+#define MSG_FINISHING_MOVEMENTS							"Term. movimientos"
+#define MSG_PRINT_PAUSED								"Impresion en pausa"
+#define MSG_RESUMING_PRINT								"Reanudar impresion"
+#define MSG_PID_EXTRUDER								"Calibracion PID"
+#define MSG_SET_TEMPERATURE								"Establecer temp.:"
+#define MSG_PID_FINISHED								"Cal. PID terminada"
+#define MSG_PID_RUNNING									"Cal. PID           "
+
+#define MSG_CALIBRATE_PINDA								"Calibrar"
+#define MSG_CALIBRATION_PINDA_MENU						"Calibracion temp."
+#define MSG_PINDA_NOT_CALIBRATED						"La temperatura de calibracion no ha sido ajustada"
+#define MSG_PINDA_PREHEAT								"Calentando PINDA"
+#define MSG_TEMP_CALIBRATION							"Cal. temp.          "
+#define MSG_TEMP_CALIBRATION_DONE						"Calibracon temperatura terminada. Presionar para continuar."
+#define MSG_TEMP_CALIBRATION_ON							"Cal. temp. [ON]"
+#define MSG_TEMP_CALIBRATION_OFF						"Cal. temp. [OFF]"

Firmware/language_it.h

@@ -237,8 +237,7 @@
 #define MSG_FILAMENT_LOADING_T2							"Inserire filamento nell'estrusore 3. Click per continuare."
 #define MSG_FILAMENT_LOADING_T3							"Inserire filamento nell'estrusore 4. Click per continuare."
 #define MSG_CHANGE_EXTR									"Cambio estrusore."
-#define MSG_FIL_LOADED_CHECK							"Filamento caricato?"
+
-#define MSG_FIL_TUNING									"Girare la manopola per regolare il filamento"
 #define MSG_FIL_ADJUSTING								"Filamento in fase di regolazione. Attendere prego."
 #define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ				"I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."
 #define MSG_CALIBRATE_E									"Calibra E"
@@ -250,3 +249,19 @@
 #define MSG_UNLOADING_FILAMENT							"Rilasc. filamento"
 #define MSG_PAPER										"Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."
 
+#define MSG_FINISHING_MOVEMENTS							"Arresto in corso"
+#define MSG_PRINT_PAUSED								"Stampa in pausa"
+#define MSG_RESUMING_PRINT								"Stampa in ripresa"
+#define MSG_PID_EXTRUDER								"Calibrazione PID"
+#define MSG_SET_TEMPERATURE								"Imposta temperatura"
+#define MSG_PID_FINISHED								"Cal. PID completa"
+#define MSG_PID_RUNNING									"Cal. PID"
+
+#define MSG_CALIBRATE_PINDA								"Calibrare"
+#define MSG_CALIBRATION_PINDA_MENU						"Taratura temp."
+#define MSG_PINDA_NOT_CALIBRATED						"Taratura della temperatura non ancora eseguita"
+#define MSG_PINDA_PREHEAT								"Riscald. PINDA"
+#define MSG_TEMP_CALIBRATION							"Cal. temp.          "
+#define MSG_TEMP_CALIBRATION_DONE						"Taratura temperatura terminata. Fare click per continuare."
+#define MSG_TEMP_CALIBRATION_ON							"Cal. temp. [ON]"
+#define MSG_TEMP_CALIBRATION_OFF						"Cal. temp. [OFF]"

Firmware/language_pl.h

@@ -248,8 +248,7 @@
 #define MSG_FILAMENT_LOADING_T2									"Wloz filament do ekstrudera 3. Potwierdz przyciskiem."
 #define MSG_FILAMENT_LOADING_T3									"Wloz filament do ekstrudera 4. Potwierdz przyciskiem."
 #define MSG_CHANGE_EXTR											"Zmienic ekstruder"
-#define MSG_FIL_LOADED_CHECK									"Czy filament jest wprowadzony?"
+
-#define MSG_FIL_TUNING											"Obrotem przycisku dostroj pozycje filamentu."
 #define MSG_FIL_ADJUSTING										"Przebiega wyrownanie filamentow. Prosze czekac."
 #define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ						"Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem."
 #define MSG_CALIBRATE_E											"Kalibruj E"
@@ -260,3 +259,20 @@
 #define MSG_FILAMENT_CLEAN										"Czy kolor jest czysty?"
 #define MSG_UNLOADING_FILAMENT									"Wysuwam filament"
 #define MSG_PAPER												"Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."
+
+#define MSG_FINISHING_MOVEMENTS									"Konczenie druku"
+#define MSG_PRINT_PAUSED										"Druk zatrzymany"
+#define MSG_RESUMING_PRINT										"Wznawianie druku"
+#define MSG_PID_EXTRUDER										"Kalibracja PID"
+#define MSG_SET_TEMPERATURE										"Ustawic temperature"
+#define MSG_PID_FINISHED										"Kal. PID zakonczona"
+#define MSG_PID_RUNNING											"Kal. PID"
+
+#define MSG_CALIBRATE_PINDA										"Skalibrowac"
+#define MSG_CALIBRATION_PINDA_MENU								"Cieplna kalibr."
+#define MSG_PINDA_NOT_CALIBRATED								"Cieplna kalibracja nie byla przeprowadzona"
+#define MSG_PINDA_PREHEAT										"Grzanie PINDA"
+#define MSG_TEMP_CALIBRATION									"Ciepl. kal.         "
+#define MSG_TEMP_CALIBRATION_DONE								"Cieplna kalibracja zakonczona. Kontynuuj przyciskiem"
+#define MSG_TEMP_CALIBRATION_ON									"Ciepl. kal. [ON]"
+#define MSG_TEMP_CALIBRATION_OFF								"Ciepl. kal. [OFF]"