josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #951 from PavelSindler/use_timer 

Use timer
This commit is contained in:
PavelSindler 2018-07-24 09:31:45 +02:00 committed by GitHub
parent 90b763775c efd03b426f
commit 77cc55ed76
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 56 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/cardreader.cpp
View File

@ -979,7 +979,7 @@ void CardReader::presort() {
#endif
lcd_update(2);
KEEPALIVE_STATE(NOT_BUSY);
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
}
void CardReader::flush_presort() {

16
Firmware/lcd.cpp
View File

@ -664,7 +664,6 @@ int8_t lcd_encoder_diff = 0;
uint8_t lcd_buttons = 0;
uint8_t lcd_button_pressed = 0;
uint8_t lcd_update_enabled = 1;
uint32_t lcd_timeoutToStatus = 0;
uint32_t lcd_next_update_millis = 0;
uint8_t lcd_status_update_delay = 0;
@ -677,8 +676,9 @@ lcd_charsetup_func_t lcd_charsetup_func = 0;
lcd_lcdupdate_func_t lcd_lcdupdate_func = 0;
uint32_t lcd_button_blanking_time = millis();
static ShortTimer buttonBlanking;
ShortTimer longPressTimer;
LongTimer lcd_timeoutToStatus;
uint8_t lcd_clicked(void)
@ -718,7 +718,6 @@ void lcd_quick_feedback(void)
void lcd_update(uint8_t lcdDrawUpdateOverride)
{
if (lcd_draw_update < lcdDrawUpdateOverride)
@ -741,7 +740,7 @@ void lcd_update_enable(uint8_t enabled)
lcd_encoder_diff = 0;
// Enabling the normal LCD update procedure.
// Reset the timeout interval.
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
// Force the keypad update now.
lcd_next_update_millis = millis() - 1;
// Full update.
@ -768,10 +767,9 @@ void lcd_buttons_update(void)
{ //if we are in non-modal mode, long press can be used and short press triggers with button release
if (READ(BTN_ENC) == 0)
{ //button is pressed
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
if (millis() > lcd_button_blanking_time)
{
lcd_button_blanking_time = millis() + BUTTON_BLANKING_TIME;
lcd_timeoutToStatus.start();
if (!buttonBlanking.running() || buttonBlanking.expired(BUTTON_BLANKING_TIME)) {
buttonBlanking.start();
if ((lcd_button_pressed == 0) && (lcd_long_press_active == 0))
{
longPressTimer.start();
@ -792,7 +790,7 @@ void lcd_buttons_update(void)
{ //button not pressed
if (lcd_button_pressed)
{ //button was released
lcd_button_blanking_time = millis() + BUTTON_BLANKING_TIME;
buttonBlanking.start();
if (lcd_long_press_active == 0)
{ //button released before long press gets activated
newbutton |= EN_C;

7
Firmware/lcd.h
View File

@ -4,6 +4,7 @@
#include <inttypes.h>
#include <stdio.h>
#include "Timer.h"
@ -80,7 +81,9 @@ extern void lcd_print(double, int = 2);
#define LCD_UPDATE_INTERVAL 100
#define LCD_TIMEOUT_TO_STATUS 30000
#define LCD_TIMEOUT_TO_STATUS 30000ul //!< Generic timeout to status screen in ms, when no user action.
#define LCD_TIMEOUT_TO_STATUS_BABYSTEP_Z 90000ul //!< Specific timeout for lcd_babystep_z screen in ms.
typedef void (*lcd_longpress_func_t)(void);
@ -106,7 +109,7 @@ extern uint8_t lcd_button_pressed;
extern uint8_t lcd_update_enabled;
extern uint32_t lcd_timeoutToStatus;
extern LongTimer lcd_timeoutToStatus;
extern uint32_t lcd_next_update_millis;

68
Firmware/ultralcd.cpp
View File

@ -8,7 +8,6 @@
#include "stepper.h"
#include "ConfigurationStore.h"
#include <string.h>
#include "Timer.h"
#include "lcd.h"
@ -175,7 +174,7 @@ bool printer_connected = true;
unsigned long display_time; //just timer for showing pid finished message on lcd;
float pid_temp = DEFAULT_PID_TEMP;
static bool forceMenuExpire = false;
bool menuExiting = false;
@ -1236,7 +1235,7 @@ void lcd_commands()
float extr = count_e(0.2, width, length);
float extr_short_segment = count_e(0.2, width, width);
if (lcd_commands_step>1) lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
if (lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
if (lcd_commands_step == 0)
{
lcd_commands_step = 10;
@ -1262,7 +1261,7 @@ void lcd_commands()
}
if (lcd_commands_step == 9 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
enquecommand_P(PSTR("G1 Z0.250 F7200.000"));
enquecommand_P(PSTR("G1 X50.0 E80.0 F1000.0"));
enquecommand_P(PSTR("G1 X160.0 E20.0 F1000.0"));
@ -1286,7 +1285,7 @@ void lcd_commands()
}
if (lcd_commands_step == 8 && !blocks_queued() && cmd_buffer_empty()) //draw meander
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
enquecommand_P(PSTR("G1 X50 Y155"));
@ -1311,7 +1310,7 @@ void lcd_commands()
if (lcd_commands_step == 7 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
strcpy(cmd1, "G1 X50 Y35 E");
strcat(cmd1, ftostr43(extr));
enquecommand(cmd1);
@ -1344,7 +1343,7 @@ void lcd_commands()
if (lcd_commands_step == 6 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 4; i < 8; i++) {
strcpy(cmd1, "G1 X70 Y");
strcat(cmd1, ftostr32(35 - i*width * 2));
@ -1373,7 +1372,7 @@ void lcd_commands()
if (lcd_commands_step == 5 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 8; i < 12; i++) {
strcpy(cmd1, "G1 X70 Y");
strcat(cmd1, ftostr32(35 - i*width * 2));
@ -1402,7 +1401,7 @@ void lcd_commands()
if (lcd_commands_step == 4 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 12; i < 16; i++) {
strcpy(cmd1, "G1 X70 Y");
strcat(cmd1, ftostr32(35 - i*width * 2));
@ -1431,7 +1430,7 @@ void lcd_commands()
if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
enquecommand_P(PSTR("G1 E-0.07500 F2100.00000"));
enquecommand_P(PSTR("G4 S0"));
enquecommand_P(PSTR("G1 E-4 F2100.00000"));
@ -1454,7 +1453,7 @@ void lcd_commands()
}
if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
enquecommand_P(PSTR("G1 X0 Y1 E3.0000"));
enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
@ -1500,7 +1499,7 @@ void lcd_commands()
float length = 20 - width;
float extr = count_e(0.2, width, length);
float extr_short_segment = count_e(0.2, width, width);
if(lcd_commands_step>1) lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
if(lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
if (lcd_commands_step == 0)
{
lcd_commands_step = 9;
@ -1540,7 +1539,7 @@ void lcd_commands()
}
if (lcd_commands_step == 7 && !blocks_queued() && cmd_buffer_empty()) //draw meander
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
//just opposite direction
@ -1588,7 +1587,7 @@ void lcd_commands()
if (lcd_commands_step == 6 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 0; i < 4; i++) {
strcpy(cmd1, "G1 X70 Y");
@ -1618,7 +1617,7 @@ void lcd_commands()
if (lcd_commands_step == 5 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 4; i < 8; i++) {
strcpy(cmd1, "G1 X70 Y");
strcat(cmd1, ftostr32(35 - i*width * 2));
@ -1647,7 +1646,7 @@ void lcd_commands()
if (lcd_commands_step == 4 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 8; i < 12; i++) {
strcpy(cmd1, "G1 X70 Y");
strcat(cmd1, ftostr32(35 - i*width * 2));
@ -1676,7 +1675,7 @@ void lcd_commands()
if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
for (int i = 12; i < 16; i++) {
strcpy(cmd1, "G1 X70 Y");
strcat(cmd1, ftostr32(35 - i*width * 2));
@ -1705,7 +1704,7 @@ void lcd_commands()
if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty())
{
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
enquecommand_P(PSTR("M107")); //turn off printer fan
#ifdef SNMM_V2
enquecommand_P(PSTR("M702 C"));
@ -1717,7 +1716,7 @@ void lcd_commands()
enquecommand_P(PSTR("G1 Z10 F1300.000"));
enquecommand_P(PSTR("G1 X10 Y180 F4000")); //home X axis
enquecommand_P(PSTR("M84"));// disable motors
lcd_timeoutToStatus = millis() - 1; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
forceMenuExpire = true; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
lcd_commands_step = 1;
}
if (lcd_commands_step == 1 && !blocks_queued() && cmd_buffer_empty())
@ -2901,7 +2900,7 @@ static void _lcd_babystep(int axis, const char *msg)
//SERIAL_ECHO("Z baby step: ");
//SERIAL_ECHO(menuData.babyStep.babystepMem[2]);
// Wait 90 seconds before closing the live adjust dialog.
lcd_timeoutToStatus = millis() + 90000;
lcd_timeoutToStatus.start();
}
if (lcd_encoder != 0)
@ -4210,7 +4209,7 @@ void menu_setlang(unsigned char lang)
lcd_update_enable(true);
lcd_clear();
menu_goto(lcd_language_menu, 0, true, true);
lcd_timeoutToStatus = -1; //infinite timeout
lcd_timeoutToStatus.stop(); //infinite timeout
lcd_draw_update = 2;
}
}
@ -4445,7 +4444,7 @@ void lcd_language()
lcd_update_enable(true);
lcd_clear();
menu_goto(lcd_language_menu, 0, true, true);
lcd_timeoutToStatus = -1; //infinite timeout
lcd_timeoutToStatus.stop(); //infinite timeout
lcd_draw_update = 2;
while ((menu_menu != lcd_status_screen) && (!lang_is_selected()))
{
@ -7606,6 +7605,25 @@ void menu_lcd_charsetup_func(void)
lcd_set_custom_characters_arrows();
}
static inline bool z_menu_expired()
{
return (menu_menu == lcd_babystep_z
&& lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS_BABYSTEP_Z));
}
static inline bool other_menu_expired()
{
return (menu_menu != lcd_status_screen
&& menu_menu != lcd_babystep_z
&& lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS));
}
static inline bool forced_menu_expire()
{
bool retval = (menu_menu != lcd_status_screen
&& forceMenuExpire);
forceMenuExpire = false;
return retval;
}
void menu_lcd_lcdupdate_func(void)
{
#if (SDCARDDETECT > 0)
@ -7635,14 +7653,14 @@ void menu_lcd_lcdupdate_func(void)
lcd_draw_update = 1;
lcd_encoder += lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
lcd_encoder_diff = 0;
lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
lcd_timeoutToStatus.start();
}
if (LCD_CLICKED) lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
if (LCD_CLICKED) lcd_timeoutToStatus.start();
(*menu_menu)();
if (lcd_timeoutToStatus < millis() && menu_menu != lcd_status_screen)
if (z_menu_expired() || other_menu_expired() || forced_menu_expire())
{
// Exiting a menu. Let's call the menu function the last time with menuExiting flag set to true
// to give it a chance to save its state.

1
Firmware/ultralcd.h
View File

@ -82,7 +82,6 @@ extern void menu_lcd_lcdupdate_func(void);
#define LCD_COMMAND_PID_EXTRUDER 7
#define LCD_COMMAND_V2_CAL 8
extern unsigned long lcd_timeoutToStatus;
extern int lcd_commands_type;
extern uint8_t farm_mode;