josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #4160 from gudnimg/cleanup-tcode-description 

Rewrite the Tcodes description
This commit is contained in:
Guðni Már Gilbert 2023-04-22 14:43:33 +00:00 committed by GitHub
parent 51da6065c8 76a76de7ea
commit 7889d54cfd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Firmware/Marlin_main.cpp
View File

@ -8622,13 +8622,13 @@ Sigma_Exit:
// end if(code_seen('M')) (end of M codes)
/*!
-----------------------------------------------------------------------------------------
# T Codes
T<extruder nr.> - select extruder in case of multi extruder printer. select filament in case of MMU_V2.
#### For MMU_V2:
T<n> Gcode to extrude at least 38.10 mm at feedrate 19.02 mm/s must follow immediately to load to extruder wheels.
@n T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
@n Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
@n Tc Load to nozzle after filament was prepared by Tc and extruder nozzle is already heated.
T<extruder nr.> - select extruder in case of multi extruder printer. Selects filament position 1-5 (T0-T4) in case of MMU.
For MMU2/S / MMU3:
T<extruder nr.> - Selects the filament position. A Gcode to load a filament to the nozzle must follow.
Tx - Printer asks user to select a filament position. Then loads the filament from the MMU unit into the extruder wheels only. G-code to heat up the nozzle follows.
Tc - Loads the filament tip from the extruder wheels into the nozzle.
T? - acts the same as Tx followed by Tc
*/
else if(*CMDBUFFER_CURRENT_STRING == 'T') {
strchr_pointer = CMDBUFFER_CURRENT_STRING;