Replace unused EEPROM entry names with placeholders
_EEPROM_FREE_NRx_ make it a bit more clear this entry is free.
This commit is contained in:
gudnimg
parent
077aa0a2b8
commit
842d029f7e
|
|
@ -85,8 +85,8 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
| ^ | ^ | ^ | 02h 2 | ^ | miniRambo Auto mode | ^ | ^
|
||||
| 0x0FFE 4094 | uchar | EEPROM_LANG | 00h 0 | ffh 255 __L__ | English / LANG_ID_PRI | LCD menu | D3 Ax0ffe C1
|
||||
| ^ | ^ | ^ | 01h 1 | ^ | Other language LANG_ID_SEC | ^ | ^
|
||||
| 0x0FFC 4092 | uint16 | EEPROM_BABYSTEP_X | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0ffc C2
|
||||
| 0x0FFA 4090 | uint16 | EEPROM_BABYSTEP_Y | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0ffa C2
|
||||
| 0x0FFC 4092 | uint16 | _EEPROM_FREE_NR10_ | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0ffc C2
|
||||
| 0x0FFA 4090 | uint16 | _EEPROM_FREE_NR11_ | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0ffa C2
|
||||
| 0x0FF8 4088 | uint16 | EEPROM_BABYSTEP_Z | ??? | ff ffh 65535 | Babystep for Z axis _legacy_ | ??? | D3 Ax0ff8 C2
|
||||
| ^ | ^ | ^ | ^ | ^ | multiple values stored now in EEPROM_Sheets_base | ^ | ^
|
||||
| 0x0FF7 4087 | uint8 | EEPROM_CALIBRATION_STATUS_V1 | ffh 255 | ffh 255 | Calibration status (<v3.12) | ??? | D3 Ax0ff7 C1
|
||||
|
|
@ -106,7 +106,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
| 0x0FC4 4036 | bool | EEPROM_FARM_MODE | 00h 0 | ffh 255 __P__ | Prusa farm mode: __off__ | G99 | D3 Ax0fc4 C1
|
||||
| ^ | ^ | ^ | 01h 1 | ^ | Prusa farm mode: __on__ | G98 | ^
|
||||
| 0x0FC3 4035 | free | _EEPROM_FREE_NR1_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0fc3 C1
|
||||
| 0x0FC1 4033 | ??? | EEPROM_FARM_NUMBER | 000-999 | ff ffh / 000 __P__ | _Free EEPROM space_ | _free space_ | D3 Ax0fc1 C2
|
||||
| 0x0FC1 4033 | ??? | _EEPROM_FREE_NR2_ | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0fc1 C2
|
||||
| 0x0FC0 4032 | bool | EEPROM_BED_CORRECTION_VALID | 00h 0 | 00h 0 | Bed correction: __invalid__ | ??? | D3 Ax0fc0 C1
|
||||
| ^ | ^ | ^ | ffh 255 | ^ | Bed correction: __valid__ | ??? | ^
|
||||
| 0x0FBF 4031 | char | EEPROM_BED_CORRECTION_LEFT | 00h ffh | 00h 0 | Bed manual correction left | LCD menu | D3 Ax0fbf C1
|
||||
|
|
@ -119,7 +119,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
| ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Bxxx | ^
|
||||
| 0x0FBB 4027 | bool | EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY | 00h 0 | ffh 255 | Toshiba Air: __off__ | LCD menu | D3 Ax0fbb C1
|
||||
| ^ | ^ | ^ | 01h 1 | ^ | Toshiba Air: __on__ | ^ | ^
|
||||
| 0x0FBA 4026 | uint8 | EEPROM_PRINT_FLAG | ??? | ??? | _Free EEPROM space_ | _free space_ | D3 Ax0fba C1
|
||||
| 0x0FBA 4026 | uint8 | _EEPROM_FREE_NR3_ | ??? | ??? | _Free EEPROM space_ | _free space_ | D3 Ax0fba C1
|
||||
| 0x0FB0 4016 | int16 | EEPROM_PROBE_TEMP_SHIFT | ??? | ??? | ??? | ??? | D3 Ax0fb0 C10
|
||||
| 0x0FAF 4015 | bool | EEPROM_TEMP_CAL_ACTIVE | 00h 0 | 00h 0 | PINDA Temp cal.: __inactive__ | LCD menu | D3 Ax0faf C1
|
||||
| ^ | ^ | ^ | ffh 255 | ^ | PINDA Temp cal.: __active__ | ^ | ^
|
||||
|
|
@ -143,8 +143,8 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
| 0x0F88 3976 | uint8 | EEPROM_UVLO_FAN_SPEED | ??? | ffh 255 | Saved Fan speed | Power Panic | D3 Ax0f88 C1
|
||||
| 0x0F87 3975 | uint8 | EEPROM_FAN_CHECK_ENABLED | 00h 0 | ??? | Fan Check __disabled__ | LCD menu | D3 Ax0f87 C1
|
||||
| ^ | ^ | ^ | 01h 1 | ffh 255 | Fan Check __enabled__ | ^ | ^
|
||||
| 0x0F75 3957 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0f75 C18
|
||||
| 0x0F73 3955 | uint16 | EEPROM_UVLO_Z_MICROSTEPS | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0f73 C2
|
||||
| 0x0F75 3957 | uint16 | _EEPROM_FREE_NR7_ | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0f75 C18
|
||||
| 0x0F73 3955 | uint16 | _EEPROM_FREE_NR8_ | ??? | ff ffh 65535 | _Free EEPROM space_ | _free space_ | D3 Ax0f73 C2
|
||||
| 0x0F72 3954 | uint8 | EEPROM_UVLO_E_ABS | ??? | ffh 0 | E axis was in relative mode (M83) | Power Panic | D3 Ax0f72 C1
|
||||
| 0x0F72 3954 | uint8 | ^ | ??? | ffh 1 | E axis was in absolute mode (M82) | Power Panic | ^
|
||||
| 0x0F6E 3950 | float | EEPROM_UVLO_CURRENT_POSITION_E | ??? | ff ff ff ffh | Saved machine position (E axis) | Power Panic | D3 Ax0f6e C4
|
||||
|
|
@ -235,7 +235,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
| ^ | ^ | ^ | 01h 1 | ^ | MMU cutter: __enabled__ | ^ | ^
|
||||
| ^ | ^ | ^ | 02h 2 | ^ | MMU cutter: __always__ | ^ | ^
|
||||
| 0x0DAE 3502 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING_FULL | ??? | ff ffh 65535 | Saved MBL points | Power Panic | D3 Ax0dae C288
|
||||
| 0x0DAD 3501 | uint8 | EEPROM_MBL_TYPE | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0dad C1
|
||||
| 0x0DAD 3501 | uint8 | _EEPROM_FREE_NR9_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0dad C1
|
||||
| 0x0DAC 3500 | bool | EEPROM_MBL_MAGNET_ELIMINATION | 01h 1 | ffh 255 | Mesh bed leveling does: __ignores__ magnets | LCD menu | D3 Ax0dac C1
|
||||
| ^ | ^ | ^ | 00h 0 | ^ | Mesh bed leveling does: __NOT ignores__ magnets | ^ | ^
|
||||
| 0x0DAB 3499 | uint8 | EEPROM_MBL_POINTS_NR | 03h 3 | ffh 255 | Mesh bed leveling points: __3x3__ | LCD menu | D3 Ax0dab C1
|
||||
|
|
@ -390,8 +390,8 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
#define EEPROM_TOP 4096
|
||||
#define EEPROM_SILENT 4095
|
||||
#define EEPROM_LANG 4094
|
||||
#define EEPROM_BABYSTEP_X 4092 // FREE EEPROM SPACE
|
||||
#define EEPROM_BABYSTEP_Y 4090 // FREE EEPROM SPACE
|
||||
#define _EEPROM_FREE_NR10_ 4092 // uint16_t
|
||||
#define _EEPROM_FREE_NR11_ 4090 // uint16_t
|
||||
#define EEPROM_BABYSTEP_Z 4088 //legacy, multiple values stored now in EEPROM_Sheets_base
|
||||
#define EEPROM_CALIBRATION_STATUS_V1 4087 // legacy, used up to v3.11
|
||||
#define EEPROM_BABYSTEP_Z0 4085
|
||||
|
|
@ -407,22 +407,24 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
// The offsets are saved as 16bit signed int, scaled to tenths of microns.
|
||||
#define EEPROM_BED_CALIBRATION_Z_JITTER (EEPROM_BED_CALIBRATION_VEC_Y-2*8)
|
||||
#define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-1)
|
||||
#define EEPROM_FREE_NR1 (EEPROM_FARM_MODE-1) // FREE EEPROM SPACE
|
||||
#define EEPROM_FARM_NUMBER (EEPROM_FREE_NR1-2) // int16_t (FREE EEPROM SPACE)
|
||||
#define EEPROM_FREE_NR1 (EEPROM_FARM_MODE-1) // uint8_t
|
||||
#define _EEPROM_FREE_NR2_ (EEPROM_FREE_NR1 - 2) // int16_t
|
||||
|
||||
// Correction of the bed leveling, in micrometers.
|
||||
// Maximum 50 micrometers allowed.
|
||||
// Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
|
||||
#define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_NUMBER-1)
|
||||
#define EEPROM_BED_CORRECTION_VALID (_EEPROM_FREE_NR2_ - 1)
|
||||
#define EEPROM_BED_CORRECTION_LEFT (EEPROM_BED_CORRECTION_VALID-1)
|
||||
#define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
|
||||
#define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
|
||||
#define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
|
||||
#define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1) // bool
|
||||
#define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1) // uint8_t (FREE EEPROM SPACE)
|
||||
#define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
|
||||
|
||||
#define _EEPROM_FREE_NR3_ (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY - 1) // uint8_t
|
||||
|
||||
#define EEPROM_PROBE_TEMP_SHIFT (_EEPROM_FREE_NR3_ - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
|
||||
#define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
|
||||
#define _EEPROM_FREE_NR6_ (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int (FREE EEPROM SPACE)
|
||||
#define _EEPROM_FREE_NR6_ (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int
|
||||
#define EEPROM_CALIBRATION_STATUS_PINDA (_EEPROM_FREE_NR6_ - 1) //0 - not calibrated; 1 - calibrated
|
||||
|
||||
#define EEPROM_UVLO (EEPROM_CALIBRATION_STATUS_PINDA - 1) // uint8_t
|
||||
|
|
@ -435,14 +437,16 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
#define EEPROM_UVLO_FEEDRATE (EEPROM_UVLO_TARGET_BED - 2) //uint16_t
|
||||
#define EEPROM_UVLO_FAN_SPEED (EEPROM_UVLO_FEEDRATE - 1)
|
||||
#define EEPROM_FAN_CHECK_ENABLED (EEPROM_UVLO_FAN_SPEED - 1)
|
||||
#define EEPROM_UVLO_MESH_BED_LEVELING (EEPROM_FAN_CHECK_ENABLED - 9*2) // 9 x uint16_t (FREE EEPROM SPACE)
|
||||
#define EEPROM_UVLO_Z_MICROSTEPS (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (FREE EEPROM SPACE)
|
||||
#define EEPROM_UVLO_E_ABS (EEPROM_UVLO_Z_MICROSTEPS - 1) // uint8_t
|
||||
|
||||
#define _EEPROM_FREE_NR7_ (EEPROM_FAN_CHECK_ENABLED - 9*2) // 9 x uint16_t
|
||||
#define _EEPROM_FREE_NR8_ (_EEPROM_FREE_NR7_ - 2) // uint16_t
|
||||
|
||||
#define EEPROM_UVLO_E_ABS (_EEPROM_FREE_NR8_ - 1) // uint8_t
|
||||
#define EEPROM_UVLO_CURRENT_POSITION_E (EEPROM_UVLO_E_ABS - 4) // float
|
||||
#define EEPROM_UVLO_SAVED_SEGMENT_IDX (EEPROM_UVLO_CURRENT_POSITION_E - 2) //uint16_t
|
||||
|
||||
#define EEPROM_FREE_NR4 (EEPROM_UVLO_SAVED_SEGMENT_IDX - 1) // FREE EEPROM SPACE
|
||||
#define EEPROM_FREE_NR5 (EEPROM_FREE_NR4 - 1) // FREE EEPROM SPACE
|
||||
#define EEPROM_FREE_NR4 (EEPROM_UVLO_SAVED_SEGMENT_IDX - 1) // uint8_t
|
||||
#define EEPROM_FREE_NR5 (EEPROM_FREE_NR4 - 1) // uint8_t
|
||||
|
||||
#define EEPROM_CRASH_DET (EEPROM_FREE_NR5 - 1) // uint8_t
|
||||
#define EEPROM_CRASH_COUNT_Y (EEPROM_CRASH_DET - 1) // uint8_t
|
||||
|
|
@ -537,8 +541,9 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
|
|||
#define EEPROM_MMU_CUTTER_ENABLED (EEPROM_MMU_LOAD_FAIL - 1) // bool
|
||||
#define EEPROM_UVLO_MESH_BED_LEVELING_FULL (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion
|
||||
|
||||
#define EEPROM_MBL_TYPE (EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t (FREE EEPROM SPACE)
|
||||
#define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)
|
||||
#define _EEPROM_FREE_NR9_ (EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) // uint8_t
|
||||
|
||||
#define EEPROM_MBL_MAGNET_ELIMINATION (_EEPROM_FREE_NR9_ - 1)
|
||||
#define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
|
||||
#define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue