josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Rename max_acceleration_units_per_sq_second to max_acceleration_mm_per_s2

This commit is contained in:
Guðni Már Gilbert 2023-05-23 18:40:42 +00:00 committed by DRracer
parent 21faa52aab
commit 8689a28776
6 changed files with 22 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Firmware/ConfigurationStore.cpp
View File

@ -34,8 +34,8 @@ void Config_PrintSettings(uint8_t level)
echomagic, echomagic, cs.axis_ustep_resolution[X_AXIS], cs.axis_ustep_resolution[Y_AXIS], cs.axis_ustep_resolution[Z_AXIS], cs.axis_ustep_resolution[E_AXIS],
echomagic, echomagic, cs.max_feedrate_normal[X_AXIS], cs.max_feedrate_normal[Y_AXIS], cs.max_feedrate_normal[Z_AXIS], cs.max_feedrate_normal[E_AXIS],
echomagic, echomagic, cs.max_feedrate_silent[X_AXIS], cs.max_feedrate_silent[Y_AXIS], cs.max_feedrate_silent[Z_AXIS], cs.max_feedrate_silent[E_AXIS],
echomagic, echomagic, cs.max_acceleration_units_per_sq_second_normal[X_AXIS], cs.max_acceleration_units_per_sq_second_normal[Y_AXIS], cs.max_acceleration_units_per_sq_second_normal[Z_AXIS], cs.max_acceleration_units_per_sq_second_normal[E_AXIS],
echomagic, echomagic, cs.max_acceleration_units_per_sq_second_silent[X_AXIS], cs.max_acceleration_units_per_sq_second_silent[Y_AXIS], cs.max_acceleration_units_per_sq_second_silent[Z_AXIS], cs.max_acceleration_units_per_sq_second_silent[E_AXIS],
echomagic, echomagic, cs.max_acceleration_mm_per_s2_normal[X_AXIS], cs.max_acceleration_mm_per_s2_normal[Y_AXIS], cs.max_acceleration_mm_per_s2_normal[Z_AXIS], cs.max_acceleration_mm_per_s2_normal[E_AXIS],
echomagic, echomagic, cs.max_acceleration_mm_per_s2_silent[X_AXIS], cs.max_acceleration_mm_per_s2_silent[Y_AXIS], cs.max_acceleration_mm_per_s2_silent[Z_AXIS], cs.max_acceleration_mm_per_s2_silent[E_AXIS],
echomagic, echomagic, cs.acceleration, cs.retract_acceleration, cs.travel_acceleration,
echomagic, echomagic, cs.minimumfeedrate, cs.mintravelfeedrate, cs.minsegmenttime, cs.max_jerk[X_AXIS], cs.max_jerk[Y_AXIS], cs.max_jerk[Z_AXIS], cs.max_jerk[E_AXIS],
echomagic, echomagic, cs.add_homing[X_AXIS], cs.add_homing[Y_AXIS], cs.add_homing[Z_AXIS]
@ -50,7 +50,7 @@ void Config_PrintSettings(uint8_t level)
),
echomagic, echomagic, cs.axis_steps_per_mm[X_AXIS], cs.axis_steps_per_mm[Y_AXIS], cs.axis_steps_per_mm[Z_AXIS], cs.axis_steps_per_mm[E_AXIS],
echomagic, echomagic, max_feedrate[X_AXIS], max_feedrate[Y_AXIS], max_feedrate[Z_AXIS], max_feedrate[E_AXIS],
echomagic, echomagic, max_acceleration_units_per_sq_second[X_AXIS], max_acceleration_units_per_sq_second[Y_AXIS], max_acceleration_units_per_sq_second[Z_AXIS], max_acceleration_units_per_sq_second[E_AXIS],
echomagic, echomagic, max_acceleration_mm_per_s2[X_AXIS], max_acceleration_mm_per_s2[Y_AXIS], max_acceleration_mm_per_s2[Z_AXIS], max_acceleration_mm_per_s2[E_AXIS],
echomagic, echomagic, cs.acceleration, cs.retract_acceleration, cs.travel_acceleration,
echomagic, echomagic, cs.minimumfeedrate, cs.mintravelfeedrate, cs.minsegmenttime, cs.max_jerk[X_AXIS], cs.max_jerk[Y_AXIS], cs.max_jerk[Z_AXIS], cs.max_jerk[E_AXIS],
echomagic, echomagic, cs.add_homing[X_AXIS], cs.add_homing[Y_AXIS], cs.add_homing[Z_AXIS]
@ -114,8 +114,8 @@ void Config_PrintSettings(uint8_t level)
static_assert (EXTRUDERS == 1, "ConfigurationStore M500_conf not implemented for more extruders, fix filament_size array size.");
static_assert (NUM_AXIS == 4, "ConfigurationStore M500_conf not implemented for more axis."
"Fix axis_steps_per_mm max_feedrate_normal max_acceleration_units_per_sq_second_normal max_jerk max_feedrate_silent"
" max_acceleration_units_per_sq_second_silent array size.");
"Fix axis_steps_per_mm max_feedrate_normal max_acceleration_mm_per_s2_normal max_jerk max_feedrate_silent"
" max_acceleration_mm_per_s2_silent array size.");
#ifdef ENABLE_AUTO_BED_LEVELING
static_assert (false, "zprobe_zoffset was not initialized in printers in field to -(Z_PROBE_OFFSET_FROM_EXTRUDER), so it contains"
"0.0, if this is not acceptable, increment EEPROM_VERSION to force use default_conf");
@ -210,9 +210,9 @@ bool Config_RetrieveSettings()
// Initialize the travel_acceleration in eeprom if not already
eeprom_init_default_float(&EEPROM_M500_base->travel_acceleration, pgm_read_float(&default_conf.travel_acceleration));
// Initialize the max_feedrate_silent and max_acceleration_units_per_sq_second_silent in eeprom if not already
// Initialize the max_feedrate_silent and max_acceleration_mm_per_s2_silent in eeprom if not already
eeprom_init_default_block(&EEPROM_M500_base->max_feedrate_silent, sizeof(EEPROM_M500_base->max_feedrate_silent), default_conf.max_feedrate_silent);
eeprom_init_default_block(&EEPROM_M500_base->max_acceleration_units_per_sq_second_silent, sizeof(EEPROM_M500_base->max_acceleration_units_per_sq_second_silent), default_conf.max_acceleration_units_per_sq_second_silent);
eeprom_init_default_block(&EEPROM_M500_base->max_acceleration_mm_per_s2_silent, sizeof(EEPROM_M500_base->max_acceleration_mm_per_s2_silent), default_conf.max_acceleration_mm_per_s2_silent);
// load the CS to RAM
eeprom_read_block(reinterpret_cast<uint8_t*>(&cs), reinterpret_cast<uint8_t*>(EEPROM_M500_base), sizeof(cs));
@ -225,10 +225,10 @@ bool Config_RetrieveSettings()
cs.max_feedrate_normal[j] = NORMAL_MAX_FEEDRATE_XY;
if (cs.max_feedrate_silent[j] > SILENT_MAX_FEEDRATE_XY)
cs.max_feedrate_silent[j] = SILENT_MAX_FEEDRATE_XY;
if (cs.max_acceleration_units_per_sq_second_normal[j] > NORMAL_MAX_ACCEL_XY)
cs.max_acceleration_units_per_sq_second_normal[j] = NORMAL_MAX_ACCEL_XY;
if (cs.max_acceleration_units_per_sq_second_silent[j] > SILENT_MAX_ACCEL_XY)
cs.max_acceleration_units_per_sq_second_silent[j] = SILENT_MAX_ACCEL_XY;
if (cs.max_acceleration_mm_per_s2_normal[j] > NORMAL_MAX_ACCEL_XY)
cs.max_acceleration_mm_per_s2_normal[j] = NORMAL_MAX_ACCEL_XY;
if (cs.max_acceleration_mm_per_s2_silent[j] > SILENT_MAX_ACCEL_XY)
cs.max_acceleration_mm_per_s2_silent[j] = SILENT_MAX_ACCEL_XY;
}
if(cs.axis_ustep_resolution[X_AXIS] == 0xff){ cs.axis_ustep_resolution[X_AXIS] = TMC2130_USTEPS_XY; }

4
Firmware/ConfigurationStore.h
View File

@ -11,7 +11,7 @@ typedef struct
char version[4];
float axis_steps_per_mm[4];
float max_feedrate_normal[4];
unsigned long max_acceleration_units_per_sq_second_normal[4];
unsigned long max_acceleration_mm_per_s2_normal[4];
float acceleration; //!< Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX
float retract_acceleration; //!< mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX
float minimumfeedrate;
@ -36,7 +36,7 @@ typedef struct
bool volumetric_enabled;
float filament_size[1]; //!< cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
float max_feedrate_silent[4]; //!< max speeds for silent mode
unsigned long max_acceleration_units_per_sq_second_silent[4];
unsigned long max_acceleration_mm_per_s2_silent[4];
unsigned char axis_ustep_resolution[4];
float travel_acceleration; //!< travel acceleration mm/s^2
// Arc Interpolation Settings, configurable via M214

6
Firmware/Marlin_main.cpp
View File

@ -6695,10 +6695,10 @@ Sigma_Exit:
if (val_silent > SILENT_MAX_ACCEL_XY)
val_silent = SILENT_MAX_ACCEL_XY;
}
cs.max_acceleration_units_per_sq_second_normal[i] = val;
cs.max_acceleration_units_per_sq_second_silent[i] = val_silent;
cs.max_acceleration_mm_per_s2_normal[i] = val;
cs.max_acceleration_mm_per_s2_silent[i] = val_silent;
#else //TMC2130
max_acceleration_units_per_sq_second[i] = val;
max_acceleration_mm_per_s2[i] = val;
#endif //TMC2130
}
}

2
Firmware/la10compat.cpp
View File

@ -74,7 +74,7 @@ float la10c_jerk(float j)
// check for a compatible range of values prior to convert (be sure that
// a higher E-jerk would still be compatible wrt the E accell range)
if(j < 4.5 && cs.max_acceleration_units_per_sq_second_normal[E_AXIS] < 2000)
if(j < 4.5 && cs.max_acceleration_mm_per_s2_normal[E_AXIS] < 2000)
return j;
// bring low E-jerk values into equivalent LA 1.5 values by

8
Firmware/planner.cpp
View File

@ -81,7 +81,7 @@ float* max_feedrate = cs.max_feedrate_normal;
// Use M201 to override by software
unsigned long* max_acceleration_units_per_sq_second = cs.max_acceleration_units_per_sq_second_normal;
unsigned long* max_acceleration_mm_per_s2 = cs.max_acceleration_mm_per_s2_normal;
unsigned long max_acceleration_steps_per_s2[NUM_AXIS];
#ifdef ENABLE_AUTO_BED_LEVELING
@ -1370,7 +1370,7 @@ void set_extrude_min_temp(int temp)
void reset_acceleration_rates()
{
for(int8_t i=0; i < NUM_AXIS; i++)
max_acceleration_steps_per_s2[i] = max_acceleration_units_per_sq_second[i] * cs.axis_steps_per_mm[i];
max_acceleration_steps_per_s2[i] = max_acceleration_mm_per_s2[i] * cs.axis_steps_per_mm[i];
}
#ifdef TMC2130
@ -1379,12 +1379,12 @@ void update_mode_profile()
if (tmc2130_mode == TMC2130_MODE_NORMAL)
{
max_feedrate = cs.max_feedrate_normal;
max_acceleration_units_per_sq_second = cs.max_acceleration_units_per_sq_second_normal;
max_acceleration_mm_per_s2 = cs.max_acceleration_mm_per_s2_normal;
}
else if (tmc2130_mode == TMC2130_MODE_SILENT)
{
max_feedrate = cs.max_feedrate_silent;
max_acceleration_units_per_sq_second = cs.max_acceleration_units_per_sq_second_silent;
max_acceleration_mm_per_s2 = cs.max_acceleration_mm_per_s2_silent;
}
reset_acceleration_rates();
}

2
Firmware/planner.h
View File

@ -187,7 +187,7 @@ extern float* max_feedrate;
// Use M201 to override by software
extern unsigned long* max_acceleration_units_per_sq_second;
extern unsigned long* max_acceleration_mm_per_s2;
extern unsigned long max_acceleration_steps_per_s2[NUM_AXIS];
extern long position[NUM_AXIS];