josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Use stallguard during Z calibration after XYZ calibration

This commit is contained in:
Alex Voinea 2024-02-23 12:57:29 +01:00
parent a503730f04
commit 8d1c3531c9
No known key found for this signature in database
GPG Key ID: 37EDFD565CB33BAD
2 changed files with 16 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Firmware/Marlin_main.cpp
View File

@ -3362,9 +3362,6 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
final_result = true;
}
}
#ifdef TMC2130
tmc2130_home_exit();
#endif
}
else
{

20
Firmware/mesh_bed_calibration.cpp
View File

@ -2838,6 +2838,9 @@ void go_home_with_z_lift()
// Returns false if the reference values are more than 3mm far away.
bool sample_mesh_and_store_reference()
{
#ifdef TMC2130
tmc2130_home_enter(Z_AXIS_MASK);
#endif
bool endstops_enabled = enable_endstops(false);
bool endstop_z_enabled = enable_z_endstop(false);
@ -2868,7 +2871,7 @@ bool sample_mesh_and_store_reference()
if (!axis_known_position[Z_AXIS] && (!READ(Z_TMC2130_DIAG))) //Z crash
{
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false;
goto fail;
}
#endif //TMC2130
@ -2876,7 +2879,7 @@ bool sample_mesh_and_store_reference()
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false;
goto fail;
}
mbl.set_z(0, 0, current_position[Z_AXIS]);
}
@ -2902,7 +2905,7 @@ bool sample_mesh_and_store_reference()
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false;
goto fail;
}
// Get cords of measuring point
@ -2921,7 +2924,7 @@ bool sample_mesh_and_store_reference()
// The span of the Z offsets is extreme. Give up.
// Homing failed on some of the points.
SERIAL_PROTOCOLLNPGM("Exreme span of the Z values!");
return false;
goto fail;
}
}
@ -2964,7 +2967,16 @@ bool sample_mesh_and_store_reference()
enable_endstops(endstops_enabled);
enable_z_endstop(endstop_z_enabled);
#ifdef TMC2130
tmc2130_home_exit();
#endif
return true;
fail:
#ifdef TMC2130
tmc2130_home_exit();
#endif
return false;
}
#ifndef NEW_XYZCAL