josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Further work on comms.

This commit is contained in:
Rob McKenzie 2018-11-08 03:54:54 +10:00
parent 4a4a10575c
commit 8d79f21ba3
4 changed files with 14294 additions and 14278 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28526
Firmware/Firmware.ino.rambo.hex
View File

File diff suppressed because it is too large Load Diff

1
Firmware/Marlin_main.cpp
View File

@ -6896,6 +6896,7 @@ Sigma_Exit:
mmu_command(MMU_CMD_T0 + tmp_extruder);
manage_response(true, true);
delay(10);
mmu_command(MMU_CMD_C0);
mmu_extruder = tmp_extruder; //filament change is finished

3
Firmware/fsensor.cpp
View File

@ -287,6 +287,7 @@ bool fsensor_check_autoload(void)
{
//puts_P(_N("fsensor_check_autoload = true !!!\n"));
if (mmu_enabled) mmu_command(MMU_CMD_FS);
fsensor_autoload_check_stop();
fsensor_autoload_enabled = false;
return true;
}
@ -541,4 +542,4 @@ void fsensor_setup_interrupt(void)
fsensor_int_pin_old = 0;
pciSetup(FSENSOR_INT_PIN);
}
}

42
Firmware/mmu.cpp
View File

@ -156,10 +156,10 @@ int8_t mmu_rx_ok(void)
return res;
}
//check 'not_ok' response
//check 'nk' response
int8_t mmu_rx_not_ok(void)
{
int8_t res = uart2_rx_str_P(PSTR("not_ok\n"));
int8_t res = uart2_rx_str_P(PSTR("nk\n"));
if (res == 1) mmu_last_response = millis();
return res;
}
@ -167,7 +167,7 @@ int8_t mmu_rx_not_ok(void)
//check 'MK3 FSensor requested to look for load' response
int8_t mmu_rx_fsensorLook(void)
{
int8_t res = uart2_rx_str_P(PSTR("FL\n"));
int8_t res = uart2_rx_str_P(PSTR("fl\n"));
if (res == 1) mmu_last_response = millis();
return res;
}
@ -372,7 +372,6 @@ void mmu_loop(void)
if (lastLoadedFilament != filament) {
printf_P(PSTR("MMU <= 'T%d'\n"), filament);
mmu_puts_P(PSTR("EE\n")); // Advise MMU CMD is correct, execute
mmuFSensorLoading = true;
mmu_state = 3; // wait for response
} else {
mmu_puts_P(PSTR("EE\n")); // Advise MMU CMD is correct, execute
@ -418,7 +417,7 @@ void mmu_loop(void)
{
printf_P(PSTR("MMU <= 'Filament seen at extruder'\n"));
mmu_puts_P(PSTR("EE\n"));
mmuFSensorLoading = false;
//mmuFSensorLoading = false;
mmu_state = 3; // wait for response
}
mmu_cmd = 0;
@ -441,8 +440,8 @@ void mmu_loop(void)
else enquecommand_front_P(PSTR("M600")); //save print and run M600 command
}
mmu_state = 1;
if (mmu_cmd == 0)
mmu_ready = true;
//if (mmu_cmd == 0)
//mmu_ready = true;
}
else if ((mmu_last_request + MMU_P0_TIMEOUT) < millis())
{ //resend request after timeout (30s)
@ -450,18 +449,24 @@ void mmu_loop(void)
}
return;
case 3: //response to mmu commands
if (mmu_rx_ok() > 0)
{
printf_P(PSTR("MMU => 'ok'\n"));
mmu_ready = true;
mmu_state = 1;
} else if(mmu_rx_fsensorLook() > 0)
if(mmu_rx_fsensorLook() > 0)
{
printf_P(PSTR("MMU => 'waiting for filament @ MK3 Sensor'\n"));
if (!fsensor_enabled) fsensor_enable();
mmuFSensorLoading = true;
fsensor_autoload_enabled = true;
fsensor_autoload_check_stop();
mmu_state = 1;
}else if(mmu_rx_not_ok() > 0)
} else if (mmu_rx_ok() > 0)
{
if (mmuFSensorLoading == true) {
mmuFSensorLoading = false;
printf_P(PSTR("MMU => 'ok :)'\n"));
}
printf_P(PSTR("MMU => 'ok'\n"));
mmu_ready = true;
mmu_state = 1;
} else if(mmu_rx_not_ok() > 0)
{
printf_P(PSTR("MMU => 'fixTheProblem!!'\n"));
mmu_ready = false;
@ -477,13 +482,13 @@ void mmu_loop(void)
case 10: //echo response, comms confirmation
if (mmu_rx_echo() > 0)
{
printf_P(PSTR("MMU => 'CMD ACK'\n"));
printf_P(PSTR("MMU => 'CMD ACK 0x%X'\n"));
//mmu_puts_P(PSTR("EE\n")); // Advise MMU CMD is correct, execute
ack_received = true;
mmu_state = 1; // Do normal Await command completion confirmation
} else if ((mmu_last_request + 1000) < millis()) { // Timeout if echo doesn't match request, resend cmd
//printf_P(PSTR("MMU => 'CMD RETRY'\n"));
printf_P(PSTR("MMU => 'CMD RETRY %d'\n"), mmu_cmd);
printf_P(PSTR("MMU => 'CMD RETRY 0x%X'\n"), mmu_cmd);
mmu_state = 1;
}
return;
@ -721,8 +726,9 @@ void mmu_M600_load_filament(bool automatic)
// printf_P(PSTR("T code: %d \n"), tmp_extruder);
// mmu_printf_P(PSTR("T%d\n"), tmp_extruder);
mmu_command(MMU_CMD_T0 + tmp_extruder);
manage_response(false, true);
delay(10);
mmu_command(MMU_CMD_C0);
mmu_extruder = tmp_extruder; //filament change is finished
delay(100);
@ -1271,4 +1277,4 @@ void mmu_eject_filament(uint8_t filament, bool recover)
{
puts_P(PSTR("Filament nr out of range!"));
}
}
}