PFW-1343 initial commit

Firmware/mmu2.cpp

@@ -86,6 +86,7 @@ MMU2::MMU2()
     , logic(&mmu2Serial)
     , extruder(MMU2_NO_TOOL)
     , previous_extruder(MMU2_NO_TOOL)
+    , tool_change_extruder(MMU2_NO_TOOL)
     , resume_position()
     , resume_hotend_temp(0)
     , logicStepLastStatus(StepStatus::Finished)
@@ -214,6 +215,7 @@ bool MMU2::tool_change(uint8_t index) {
 
         st_synchronize();
 
+        tool_change_extruder = index;
         logic.ToolChange(index); // let the MMU pull the filament out and push a new one in
         manage_response(true, true);
         
@@ -259,6 +261,7 @@ bool MMU2::tool_change(char code, uint8_t slot) {
     case 'x': {
         set_extrude_min_temp(0); // Allow cold extrusion since Tx only loads to the gears not nozzle
         st_synchronize();
+        tool_change_extruder = slot;
         logic.ToolChange(slot);
         manage_response(false, false);
         extruder = slot;
@@ -277,7 +280,11 @@ bool MMU2::tool_change(char code, uint8_t slot) {
 }
 
 uint8_t MMU2::get_current_tool() const {
-    return extruder == MMU2_NO_TOOL ? -1 : extruder;
+    return extruder == MMU2_NO_TOOL ? (uint8_t)FILAMENT_UNKNOWN : extruder;
+}
+
+uint8_t MMU2::get_tool_change_tool() const {
+    return tool_change_extruder == MMU2_NO_TOOL ? (uint8_t)FILAMENT_UNKNOWN : tool_change_extruder;
 }
 
 bool MMU2::set_filament_type(uint8_t index, uint8_t type) {
@@ -310,6 +317,7 @@ bool MMU2::unload() {
 
         // no active tool
         extruder = MMU2_NO_TOOL;
+        tool_change_extruder = MMU2_NO_TOOL;
     }
     return true;
 }
@@ -364,6 +372,7 @@ bool MMU2::load_filament_to_nozzle(uint8_t index) {
             filament_ramming();
         }
 
+        tool_change_extruder = index;
         logic.ToolChange(index);
         manage_response(true, true);
 
@@ -426,6 +435,7 @@ bool MMU2::eject_filament(uint8_t index, bool recover) {
 
     // no active tool
     extruder = MMU2_NO_TOOL;
+    tool_change_extruder = MMU2_NO_TOOL;
     Sound_MakeSound(e_SOUND_TYPE_StandardConfirm);
 //    disable_E0();
 

Firmware/mmu2.h

@@ -104,13 +104,16 @@ public:
     /// Requires unloaded filament from the printer (obviously)
     /// @returns false if the operation cannot be performed (Stopped)
     bool cut_filament(uint8_t index);
-    
+
     /// @returns the active filament slot index (0-4) or 0xff in case of no active tool
     uint8_t get_current_tool() const;
 
     /// @returns the previous active filament slot index (0-4) or 0xff in case of no active tool at boot-up
     inline uint8_t get_previous_tool() const { return previous_extruder; };
     
+    /// @returns The filament slot index (0 to 4) that will be loaded next, 0xff in case of no active tool change 
+    uint8_t get_tool_change_tool() const;
+
     bool set_filament_type(uint8_t index, uint8_t type);
 
     /// Issue a "button" click into the MMU - to be used from Error screens of the MMU
@@ -205,6 +208,7 @@ private:
     ProtocolLogic logic; ///< implementation of the protocol logic layer
     int extruder; ///< currently active slot in the MMU ... somewhat... not sure where to get it from yet
     uint8_t previous_extruder; ///< last active slot in the MMU, useful for M600
+    uint8_t tool_change_extruder; ///< only used for UI purposes
 
     xyz_pos_t resume_position;
     int16_t resume_hotend_temp;

Firmware/ultralcd.cpp

@@ -452,17 +452,19 @@ void lcdui_print_percent_done(void)
 // Print extruder status (5 chars total)
 void lcdui_print_extruder(void) {
     uint8_t chars = 0;
-// @@TODO   if (MMU2::mmu2.get_current_tool() == tmp_extruder) {
+    if (MMU2::mmu2.get_current_tool() == MMU2::mmu2.get_tool_change_tool()) {
-//        if (MMU2::mmu2.get_current_tool() == MMU2::FILAMENT_UNKNOWN)
+        if (MMU2::mmu2.get_current_tool() == (uint8_t)MMU2::FILAMENT_UNKNOWN) {
-//            chars = lcd_printf_P(_N(" F?"));
+            chars = lcd_printf_P(_N(" F?"));
-//        else
+        } else {
-//            chars = lcd_printf_P(_N(" F%u"), MMU2::mmu2.get_current_tool() + 1);
+            chars = lcd_printf_P(_N(" F%u"), MMU2::mmu2.get_current_tool() + 1);
-//    } else {
+        }
-//        if (MMU2::mmu2.get_current_tool() == MMU2::FILAMENT_UNKNOWN)
+    } else {
-//            chars = lcd_printf_P(_N(" ?>%u"), tmp_extruder + 1);
+        if (MMU2::mmu2.get_current_tool() == (uint8_t)MMU2::FILAMENT_UNKNOWN) {
-//        else
+            chars = lcd_printf_P(_N(" ?>%u"), MMU2::mmu2.get_tool_change_tool() + 1);
-//            chars = lcd_printf_P(_N(" %u>%u"), MMU2::mmu2.get_current_tool() + 1, tmp_extruder + 1);
+        } else {
-//    }
+            chars = lcd_printf_P(_N(" %u>%u"), MMU2::mmu2.get_current_tool() + 1, MMU2::mmu2.get_tool_change_tool() + 1);
+        }
+    }
     lcd_space(5 - chars);
 }