diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index 9413e7017..9a3aa66d3 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -3526,7 +3526,7 @@ static void gcode_M600(bool automatic, float x_position, float y_position, float
         {
             KEEPALIVE_STATE(PAUSED_FOR_USER);
             uint8_t choice =
-                lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Was filament unload successful?"), false, LCD_LEFT_BUTTON_CHOICE); ////MSG_UNLOAD_SUCCESSFUL c=20 r=2
+                lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Was filament unload successful?"), false, LCD_LEFT_BUTTON_CHOICE); ////MSG_UNLOAD_SUCCESSFUL c=20 r=3
             if (choice == LCD_MIDDLE_BUTTON_CHOICE) {
                 lcd_clear();
                 lcd_puts_at_P(0, 2, _T(MSG_PLEASE_WAIT));
diff --git a/Firmware/messages.cpp b/Firmware/messages.cpp
index 8bbfd1fb7..326bcc5b2 100644
--- a/Firmware/messages.cpp
+++ b/Firmware/messages.cpp
@@ -34,8 +34,8 @@ const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////MSG_FILAMENT c=17
 const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////MSG_FAN_SPEED c=14
 const char MSG_HOTEND_FAN_SPEED[] PROGMEM_I1 = ISTR("Hotend fan:");////MSG_HOTEND_FAN_SPEED c=15
 const char MSG_PRINT_FAN_SPEED[] PROGMEM_I1 = ISTR("Print fan:"); ////MSG_PRINT_FAN_SPEED c=15
-const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////MSG_FILAMENT_CLEAN c=20 r=2
-const char MSG_FILAMENT_LOADED[] PROGMEM_I1 = ISTR("Is filament loaded?"); ////MSG_FILAMENT_LOADED c=20 r=2
+const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////MSG_FILAMENT_CLEAN c=20 r=3
+const char MSG_FILAMENT_LOADED[] PROGMEM_I1 = ISTR("Is filament loaded?"); ////MSG_FILAMENT_LOADED c=20 r=3
 const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////MSG_FILAMENTCHANGE c=18
 const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[] PROGMEM_I1 = ISTR("Searching bed calibration point"); ////MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 const char MSG_FINISHING_MOVEMENTS[] PROGMEM_I1 = ISTR("Finishing movements"); ////MSG_FINISHING_MOVEMENTS c=20
@@ -79,7 +79,7 @@ const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////MS
 const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////MSG_PRESS_TO_UNLOAD c=20 r=4
 const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////MSG_PRINT_ABORTED c=20
 const char MSG_PULL_OUT_FILAMENT[] PROGMEM_I1 = ISTR("Please pull out filament immediately"); ////MSG_PULL_OUT_FILAMENT c=20 r=4
-const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover print?"); ////MSG_RECOVER_PRINT c=20 r=2
+const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover print?"); ////MSG_RECOVER_PRINT c=20 r=3
 const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\x04Refresh"); ////MSG_REFRESH c=18
 const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////MSG_REMOVE_STEEL_SHEET c=20 r=4
 const char MSG_RESET[] PROGMEM_I1 = ISTR("Reset"); ////MSG_RESET c=14
@@ -109,7 +109,7 @@ const char MSG_AUTO_POWER[] PROGMEM_I1 = ISTR("Auto power"); ////MSG_AUTO_POWER
 const char MSG_SILENT[] PROGMEM_I1 = ISTR("Silent"); ////MSG_SILENT c=7
 const char MSG_NORMAL[] PROGMEM_I1 = ISTR("Normal"); ////MSG_NORMAL c=7
 const char MSG_STEALTH[] PROGMEM_I1 = ISTR("Stealth"); ////MSG_STEALTH c=7
-const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////MSG_STEEL_SHEET_CHECK c=20 r=2
+const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////MSG_STEEL_SHEET_CHECK c=20 r=3
 const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////MSG_STOP_PRINT c=18
 const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED."); ////MSG_STOPPED c=20
 const char MSG_PINDA_CALIBRATION[] PROGMEM_I1 = ISTR("PINDA cal."); ////MSG_PINDA_CALIBRATION c=13
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index dbd4715ae..42a562317 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -2875,7 +2875,7 @@ bool lcd_calibrate_z_end_stop_manual(bool only_z)
             }
         }
         // Let the user confirm, that the Z carriage is at the top end stoppers.
-        uint8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+        uint8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
         if (result == LCD_BUTTON_TIMEOUT)
             goto canceled;
         else if (result == LCD_LEFT_BUTTON_CHOICE)
diff --git a/lang/po/Firmware.pot b/lang/po/Firmware.pot
index b15bd4b9e..f7bcb2fa0 100644
--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
@@ -61,7 +61,7 @@ msgstr ""
 msgid "Ambient"
 msgstr ""
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr ""
@@ -174,7 +174,7 @@ msgstr ""
 msgid "Belt test"
 msgstr ""
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -676,7 +676,7 @@ msgstr ""
 msgid "Filament"
 msgstr ""
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -947,13 +947,13 @@ msgid ""
 " If the issue persists, contact support."
 msgstr ""
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr ""
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2253,7 +2253,7 @@ msgstr ""
 msgid "Warning: printer type changed."
 msgstr ""
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr ""
diff --git a/lang/po/Firmware_cs.po b/lang/po/Firmware_cs.po
index ddd577fcd..32a36ec88 100644
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
@@ -70,7 +70,7 @@ msgstr "Vzdy"
 msgid "Ambient"
 msgstr "Okoli"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Dojely oba Z voziky k~hornimu dorazu?"
@@ -185,7 +185,7 @@ msgstr "Stav remenu"
 msgid "Belt test"
 msgstr "Test remenu"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -700,7 +700,7 @@ msgstr "Fil. senzor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -991,13 +991,13 @@ msgstr ""
 "Interní chyba. Zkuste resetovat MMU ci aktualizujte FW. Pokud pretrvava, "
 "kontakujte tech. podporu."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Je filament zaveden?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2342,7 +2342,7 @@ msgstr "Varovani: doslo ke zmene typu motherboardu."
 msgid "Warning: printer type changed."
 msgstr "Varovani: doslo ke zmene typu tiskarny."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Bylo vysunuti filamentu uspesne?"
diff --git a/lang/po/Firmware_de.po b/lang/po/Firmware_de.po
index f5ba6c8d6..0cee3806a 100644
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
@@ -70,7 +70,7 @@ msgstr "Immer"
 msgid "Ambient"
 msgstr "Raumtemp."
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Sind linke+rechte Z- Schlitten ganz oben?"
@@ -182,7 +182,7 @@ msgstr "Gurtstatus"
 msgid "Belt test"
 msgstr "Riementest"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -697,7 +697,7 @@ msgstr "Fil. Sensor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -993,13 +993,13 @@ msgstr ""
 "Interner Laufzeitfehler. MMU-Einheit zurücksetzen oder Firmware aktualisieren. "
 "Ansonsten Support kontaktieren."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Ist das Filament geladen?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2342,7 +2342,7 @@ msgstr "Warnung: Platinentyp wurde geändert."
 msgid "Warning: printer type changed."
 msgstr "Warnung: Druckertyp wurde geändert."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Konnten Sie das Filament entnehmen?"
diff --git a/lang/po/Firmware_es.po b/lang/po/Firmware_es.po
index f14a5ef49..07d8f771c 100644
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
@@ -70,7 +70,7 @@ msgstr "Siemp."
 msgid "Ambient"
 msgstr "Ambiente"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Carros Z izq./der. estan arriba maximo?"
@@ -185,7 +185,7 @@ msgstr "Estado de correa"
 msgid "Belt test"
 msgstr "Test cinturon"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -701,7 +701,7 @@ msgstr "Sensor Fil."
 msgid "Filament"
 msgstr "Filamento"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -998,13 +998,13 @@ msgstr ""
 "Error interno de ejecucion. Intenta reiniciar la MMU o actualizar el "
 "firmware. Si el problema persiste, ponte en contacto con el servicio tecnico."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Esta el filamento cargado?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2370,7 +2370,7 @@ msgstr "Aviso: el tipo de placa ha cambiado."
 msgid "Warning: printer type changed."
 msgstr "Aviso: ha cambiado el tipo de impresora."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Se descargo con exito el filamento?"
diff --git a/lang/po/Firmware_fr.po b/lang/po/Firmware_fr.po
index 8d16d1d02..05bce27eb 100644
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
@@ -70,7 +70,7 @@ msgstr "Tjrs"
 msgid "Ambient"
 msgstr "Ambiant"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Z~carriages gauche + droite tout en haut?"
@@ -186,7 +186,7 @@ msgstr "Statut courroie"
 msgid "Belt test"
 msgstr "Test de courroie"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -704,7 +704,7 @@ msgstr "Capteur Fil."
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -1001,13 +1001,13 @@ msgstr ""
 "Erreur d'execution interne. Essayez de reinitialiser MMU ou de mettre a jour "
 "le FW. Si le probleme persiste, contactez le support."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Fil. est-il charge?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2362,7 +2362,7 @@ msgstr "Attention: Type de carte mere modifie."
 msgid "Warning: printer type changed."
 msgstr "Attention: Type d'imprimante modifie"
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Dechargement du filament reussi?"
diff --git a/lang/po/Firmware_hr.po b/lang/po/Firmware_hr.po
index 70008b700..4b5897e1d 100644
--- a/lang/po/Firmware_hr.po
+++ b/lang/po/Firmware_hr.po
@@ -70,7 +70,7 @@ msgstr "Uvijek"
 msgid "Ambient"
 msgstr "Ambijent"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Jesu lijevi i desni Z~nosaci podignuti?"
@@ -185,7 +185,7 @@ msgstr "Status remena"
 msgid "Belt test"
 msgstr "Testiranje remena"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -700,7 +700,7 @@ msgstr "Fil. senzor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -996,13 +996,13 @@ msgstr ""
 "Interna pogreska vremena izvodjenja. Pokušajte resetirati MMU jedinicu ili "
 "azurirati firmware. Ako se problem nastavi, obratite se podrsci."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Je li filament napunjen?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2354,7 +2354,7 @@ msgstr "Upozorenje: tip maticne ploce je promijenjen."
 msgid "Warning: printer type changed."
 msgstr "Upozorenje: promijenjena je vrsta printera."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Je li praznjenje fil. bilo uspjesno?"
diff --git a/lang/po/Firmware_hu.po b/lang/po/Firmware_hu.po
index 373438841..2e68da507 100644
--- a/lang/po/Firmware_hu.po
+++ b/lang/po/Firmware_hu.po
@@ -70,7 +70,7 @@ msgstr "Mindig"
 msgid "Ambient"
 msgstr "Kornyezet"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "A Z tengely a felso vegponton van?"
@@ -185,7 +185,7 @@ msgstr "Szij allapot"
 msgid "Belt test"
 msgstr "Szij teszt"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -703,7 +703,7 @@ msgstr "Fil. szenzor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -1000,13 +1000,13 @@ msgstr ""
 "Futas kozbeni hiba. Inditsd ujra az MMU-t vagy frissitsd a firmwaret. Ha a "
 "problema fennall, fordulj a supporthoz."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Filament behelyezve?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2358,7 +2358,7 @@ msgstr "Figyelem: az alaplap tipusa megvaltozott."
 msgid "Warning: printer type changed."
 msgstr "Figyelem: a nyomtato tipusa megvaltozott."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Sikerult kivenni a filamentet?"
diff --git a/lang/po/Firmware_it.po b/lang/po/Firmware_it.po
index 6065f2584..d7256df22 100644
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
@@ -70,7 +70,7 @@ msgstr "Sempre"
 msgid "Ambient"
 msgstr "Ambiente"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "I carrelli Z sin/des sono altezza max?"
@@ -185,7 +185,7 @@ msgstr "Stato cinghie"
 msgid "Belt test"
 msgstr "Test cinghie"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -702,7 +702,7 @@ msgstr "Sensore fil."
 msgid "Filament"
 msgstr "Filamento"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -999,13 +999,13 @@ msgstr ""
 "Errore runtime interno. Provare a resettare l'unità MMU o ad aggiornare il "
 "FW. Se il problema persiste, contattare l'assistenza."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Il filamento e' stato caricato?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2364,7 +2364,7 @@ msgstr "Avviso: tipo di scheda madre cambiato"
 msgid "Warning: printer type changed."
 msgstr "Avviso: tipo di stampante cambiato."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Filamento scaricato con successo?"
diff --git a/lang/po/Firmware_nl.po b/lang/po/Firmware_nl.po
index e96cf6e96..593b3077c 100644
--- a/lang/po/Firmware_nl.po
+++ b/lang/po/Firmware_nl.po
@@ -70,7 +70,7 @@ msgstr "Altijd"
 msgid "Ambient"
 msgstr "Kamertemp."
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Zijn beide Z wagen heelemaal boven?"
@@ -186,7 +186,7 @@ msgstr "Riem status"
 msgid "Belt test"
 msgstr "Riemtest"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -705,7 +705,7 @@ msgstr "Fil. sensor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -1001,13 +1001,13 @@ msgstr ""
 "Interne runtime fout. Probeer de MMU-eenheid te resetten of de firmware bij "
 "te werken. Als het probleem aanhoudt, neem dan contact op met support."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Is filament geladen?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2367,7 +2367,7 @@ msgstr "Waarschuwing: type moederbord gewijzigd."
 msgid "Warning: printer type changed."
 msgstr "Waarschuwing: printertype gewijzigd."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Is filament succes- vol verwijderd?"
diff --git a/lang/po/Firmware_no.po b/lang/po/Firmware_no.po
index 463d50155..56c6169c3 100644
--- a/lang/po/Firmware_no.po
+++ b/lang/po/Firmware_no.po
@@ -70,7 +70,7 @@ msgstr "Alltid"
 msgid "Ambient"
 msgstr "Omgivelse"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Er venstre og høyre Z-vogn helt oppe?"
@@ -186,7 +186,7 @@ msgstr "Beltestatus"
 msgid "Belt test"
 msgstr "Belte test"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -703,7 +703,7 @@ msgstr "Fil. Sensor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -992,13 +992,13 @@ msgstr ""
 "Intern runtime feil. Prøv omstart av MMU enheten eller oppdater fastvaren. "
 "Hvis feilen vedvarer, kontakt kundestøtte."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Er filament lastet?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2337,7 +2337,7 @@ msgstr "Advarsel: Hovedkortype forandret."
 msgid "Warning: printer type changed."
 msgstr "Advarsel: Printertype forandret."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Ble filamentet lastet helt ut?"
diff --git a/lang/po/Firmware_pl.po b/lang/po/Firmware_pl.po
index 74cd16212..25ca22143 100644
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
@@ -70,7 +70,7 @@ msgstr "Zawsze"
 msgid "Ambient"
 msgstr "Otoczenie"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Obydwa konce osi sa na szczycie?"
@@ -185,7 +185,7 @@ msgstr "Stan paskow"
 msgid "Belt test"
 msgstr "Test paskow"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -702,7 +702,7 @@ msgstr "Czuj. filam."
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -991,13 +991,13 @@ msgstr ""
 "Wewnetrzny blad dzialania. Resetuj MMU lub zaktualizuj FW. Skontaktuj sie z "
 "pomoca techniczna, jeśli problem nadal występuje."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Filament jest zaladowany?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2346,7 +2346,7 @@ msgstr "Ostrzezenie: plyta glowna ulegla zmianie."
 msgid "Warning: printer type changed."
 msgstr "Ostrzezenie: rodzaj drukarki ulegl zmianie"
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Rozladowanie fil. ok?"
diff --git a/lang/po/Firmware_ro.po b/lang/po/Firmware_ro.po
index 156e4897a..eee117045 100644
--- a/lang/po/Firmware_ro.po
+++ b/lang/po/Firmware_ro.po
@@ -70,7 +70,7 @@ msgstr "Mereu"
 msgid "Ambient"
 msgstr "Ambiental"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Este axa Z aliniata sus?"
@@ -187,7 +187,7 @@ msgstr "Status curele"
 msgid "Belt test"
 msgstr "Test curele"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -705,7 +705,7 @@ msgstr "Senzor Fil."
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -999,13 +999,13 @@ msgstr ""
 "ERR de rulare interna. Incercati sa resetati unitatea MMU sau actualizati "
 "firmwarul. Daca problema persista, contactati dep. support"
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Este filamentul incarcat?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2357,7 +2357,7 @@ msgstr "Atentie: tipul placii de baza s-a schimbat."
 msgid "Warning: printer type changed."
 msgstr "Atentie: tipul imprimantei s-a schimbat."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Filamentul a fost scos cu succes?"
diff --git a/lang/po/Firmware_sk.po b/lang/po/Firmware_sk.po
index bf9f2c874..df70270b1 100644
--- a/lang/po/Firmware_sk.po
+++ b/lang/po/Firmware_sk.po
@@ -70,7 +70,7 @@ msgstr "Vzdy"
 msgid "Ambient"
 msgstr "Okolie"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Dosli oba Z voziky k hornemu dorazu?"
@@ -185,7 +185,7 @@ msgstr "Stav remena"
 msgid "Belt test"
 msgstr "Test remena"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -702,7 +702,7 @@ msgstr "Fil. senzor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -995,13 +995,13 @@ msgstr ""
 "Interna chyba. Skuste resetovat MMU alebo aktualizovat firmware. Ak chyba "
 "pretrvava, kontaktujte podporu."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Je filament zavedeny?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2347,7 +2347,7 @@ msgstr "Varovanie: doslo k zmene typu maticnej dosky."
 msgid "Warning: printer type changed."
 msgstr "Varovanie: doslo k zmene typu tlaciarne."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Bolo vysunutie filamentu uspesne?"
diff --git a/lang/po/Firmware_sv.po b/lang/po/Firmware_sv.po
index a4e21da0a..dd11a610d 100644
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
@@ -70,7 +70,7 @@ msgstr "Alltid"
 msgid "Ambient"
 msgstr "Omgivande"
 
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=3
 #: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Är båda Z-vagnarna helt uppe?"
@@ -186,7 +186,7 @@ msgstr "Bält status"
 msgid "Belt test"
 msgstr "Bält test"
 
-#. MSG_RECOVER_PRINT c=20 r=2
+#. MSG_RECOVER_PRINT c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
@@ -702,7 +702,7 @@ msgstr "Fil. sensor"
 msgid "Filament"
 msgstr "Filament"
 
-#. MSG_FILAMENT_CLEAN c=20 r=2
+#. MSG_FILAMENT_CLEAN c=20 r=3
 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
 #: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
@@ -999,13 +999,13 @@ msgstr ""
 "Internt körtidsfel. Prova återställa MMU-enheten eller uppdatera firmware. "
 "Kontakta supporten om problemet kvarstår."
 
-#. MSG_FILAMENT_LOADED c=20 r=2
+#. MSG_FILAMENT_LOADED c=20 r=3
 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
 #: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Är filament laddat?"
 
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
+#. MSG_STEEL_SHEET_CHECK c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
 #: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
@@ -2357,7 +2357,7 @@ msgstr "Varning: moderkortstyp ändrad."
 msgid "Warning: printer type changed."
 msgstr "Varning: skrivartyp ändrats."
 
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#. MSG_UNLOAD_SUCCESSFUL c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Lyckades filamentutmatningen?"