From 9428064a9ec893f09a4376f1fe3c2577654a54b6 Mon Sep 17 00:00:00 2001
From: 3d-gussner <3d.gussner@gmail.com>
Date: Thu, 15 Dec 2022 14:04:09 +0100
Subject: [PATCH] Remove unused community translations

---
 lang/po/Firmware_da.po | 2412 ----------------------------------------
 lang/po/Firmware_lb.po | 2412 ----------------------------------------
 lang/po/Firmware_lt.po | 2412 ----------------------------------------
 lang/po/Firmware_sl.po | 2412 ----------------------------------------
 4 files changed, 9648 deletions(-)
 delete mode 100644 lang/po/Firmware_da.po
 delete mode 100644 lang/po/Firmware_lb.po
 delete mode 100644 lang/po/Firmware_lt.po
 delete mode 100644 lang/po/Firmware_sl.po

diff --git a/lang/po/Firmware_da.po b/lang/po/Firmware_da.po
deleted file mode 100644
index 371cf99f7..000000000
--- a/lang/po/Firmware_da.po
+++ /dev/null
@@ -1,2412 +0,0 @@
-# Translation of Prusa-Firmware into Danish.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:26:56 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:26:56 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: da\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:291
-#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7017
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
-#: ../../Firmware/ultralcd.cpp:3795
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2661
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7293
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
-#: ../../Firmware/ultralcd.cpp:4131
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1399
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2974
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4842
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:5751
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5558
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2294
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_PROGRESS_AVOID_GRIND c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:16
-#: ../../Firmware/mmu2_progress_converter.cpp:42
-msgid "Avoiding grind"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:6996
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:6995
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
-#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
-#: ../../Firmware/ultralcd.cpp:7812
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
-#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
-#: ../../Firmware/ultralcd.cpp:5863
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:569
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:572
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4854
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
-#: ../../Firmware/Marlin_main.cpp:2992
-#: ../../Firmware/mesh_bed_calibration.cpp:2858
-#: ../../Firmware/mesh_bed_calibration.cpp:2866
-#: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6953
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
-#: ../../Firmware/ultralcd.cpp:1719
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4844
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
-#: ../../Firmware/messages.cpp:81
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
-#: ../../Firmware/ultralcd.cpp:5761
-msgid "Brightness"
-msgstr ""
-
-#. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
-msgid "COMMUNICATION ERROR"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4848
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2937
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:619
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2936
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7295
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:630
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
-#: ../../Firmware/mmu2/errors_list.h:255
-msgid "Can't move Selector or Idler."
-msgstr ""
-
-#. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
-msgid "Cannot perform the action, filament is already loaded. Unload it first."
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7686
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5521
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
-#: ../../Firmware/ultralcd.cpp:5717
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2172
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2220
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
-#: ../../Firmware/ultralcd.cpp:7285
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
-#: ../../Firmware/ultralcd.cpp:7286
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7287
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7284
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7383
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7290
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
-#: ../../Firmware/ultralcd.cpp:7292
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4686
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2223
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3623
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1269
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
-#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
-#: ../../Firmware/ultralcd.cpp:5743
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:586 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3527
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
-#: ../../Firmware/ultralcd.cpp:5552
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
-msgid "Cutter"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1660
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
-msgid "Dim"
-msgstr ""
-
-#. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
-msgid "Disable"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4722
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_PROGRESS_DISENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:10
-#: ../../Firmware/mmu2_progress_converter.cpp:36
-#: ../../Firmware/mmu2_progress_converter.cpp:44
-msgid "Disengaging idler"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4096
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
-msgid "Done"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4165
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_HELP_FIL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:19
-#: ../../Firmware/mmu2_progress_converter.cpp:48
-msgid "ERR Help filament"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_INTERNAL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:18
-#: ../../Firmware/mmu2_progress_converter.cpp:47
-msgid "ERR Internal"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_TMC c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:20
-#: ../../Firmware/mmu2_progress_converter.cpp:49
-msgid "ERR TMC failed"
-msgstr ""
-
-#. MSG_PROGRESS_WAIT_USER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:17
-#: ../../Firmware/mmu2_progress_converter.cpp:46
-msgid "ERR Wait for User"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
-#: ../../Firmware/ultralcd.cpp:5549
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_PROGRESS_EJECT_FILAMENT c=20
-#. @@todo duplicate
-#: ../../Firmware/mmu2_progress_converter.cpp:27
-#: ../../Firmware/mmu2_progress_converter.cpp:58
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6966
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6971
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6957
-msgid "Endstops"
-msgstr ""
-
-#. MSG_PROGRESS_ENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:9
-#: ../../Firmware/mmu2_progress_converter.cpp:35
-#: ../../Firmware/mmu2_progress_converter.cpp:45
-msgid "Engaging idler"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3501
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1715
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
-#: ../../Firmware/ultralcd.cpp:4226
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:4228
-msgid "F. jam detect"
-msgstr ""
-
-#. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4225
-msgid "F. runout"
-msgstr ""
-
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
-msgid "FILAMENT ALREADY LOA"
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
-msgid "FINDA DIDNT TRIGGER"
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
-msgid ""
-"FINDA didn't switch off while unloading filament. Try unloading manually. "
-"Ensure filament can move and FINDA works."
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
-msgid ""
-"FINDA didn't trigger while loading the filament. Ensure the filament can "
-"move and FINDA works."
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
-msgid "FINDA: FILAM. STUCK"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
-#: ../../Firmware/ultralcd.cpp:4237
-msgid "FS Action"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
-msgid "FSENSOR DIDNT TRIGG."
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
-msgid "FSENSOR TOO EARLY"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
-msgid "FSENSOR: FIL. STUCK"
-msgstr ""
-
-#. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
-msgid "FW RUNTIME ERROR"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5576
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5579
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7012
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
-#: ../../Firmware/ultralcd.cpp:5865
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
-#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
-#: ../../Firmware/ultralcd.cpp:7283
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:5728
-msgid "Fans check"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:13
-#: ../../Firmware/mmu2_progress_converter.cpp:39
-msgid "Feeding to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FSENSOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:31
-#: ../../Firmware/mmu2_progress_converter.cpp:62
-msgid "Feeding to FSensor"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_EXTRUDER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:14
-#: ../../Firmware/mmu2_progress_converter.cpp:40
-msgid "Feeding to extruder"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_NOZZLE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:15
-#: ../../Firmware/mmu2_progress_converter.cpp:41
-msgid "Feeding to nozzle"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
-#: ../../Firmware/ultralcd.cpp:1324
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5721
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3795
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
-#: ../../Firmware/ultralcd.cpp:2287
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2222
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
-#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
-#: ../../Firmware/ultralcd.cpp:7310
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
-msgid ""
-"Filament sensor didn't switch off while unloading filament. Ensure filament "
-"can move and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
-msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
-msgid ""
-"Filament sensor triggered too early while loading to extruder. Check there "
-"isn't anything stuck in PTFE tube. Check that sensor reads properly."
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2356
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7441
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
-#: ../../Firmware/ultralcd.cpp:5407
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4021
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5711
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7001
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:402
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:409
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:135 ../../Firmware/util.cpp:323
-#: ../../Firmware/util.cpp:454
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/util.cpp:329
-#: ../../Firmware/util.cpp:460
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:370
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:377
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
-#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6949
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:561
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9474
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:564
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Hej, jeg er din originale Prusa i3 -printer. Vil du have mig til at guide "
-"dig gennem installationsprocessen?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "High power"
-msgstr ""
-
-#. MSG_PROGRESS_HOMING c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:29
-#: ../../Firmware/mmu2_progress_converter.cpp:60
-msgid "Homing"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7301
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4030
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4038
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
-msgid "IDLER CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
-msgid "IDLER CANNOT MOVE"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
-msgid "INSPECT FINDA"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
-msgid "INVALID TOOL"
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4104
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2530
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5528
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2158
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6215
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
-msgid ""
-"Internal runtime error. Try resetting the MMU unit or updating the firmware. "
-"If the issue persists, contact support."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
-#: ../../Firmware/ultralcd.cpp:4063
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2252 ../../Firmware/messages.cpp:51
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
-#: ../../Firmware/ultralcd.cpp:1292
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
-#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2487
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4755
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
-#: ../../Firmware/ultralcd.cpp:5476
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
-#: ../../Firmware/ultralcd.cpp:5152
-msgid "Load All"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
-#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
-#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5547
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_TEST c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
-msgid "Loading Test"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2194
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
-#: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:6989
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4418
-msgid "Loud"
-msgstr ""
-
-#. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
-msgid "MMU FW UPDATE NEEDED"
-msgstr ""
-
-#. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
-msgid "MMU Firmware internal error, please reset the MMU."
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
-#: ../../Firmware/ultralcd.cpp:4369
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
-msgid "MMU NOT RESPONDING"
-msgstr ""
-
-#. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:619
-msgid "MMU Retry: Restoring temperature..."
-msgstr ""
-
-#. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
-#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
-msgid "MMU SELFTEST FAILED"
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
-#: ../../Firmware/ultralcd.cpp:1208
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
-msgid ""
-"MMU unit not responding correctly. Check the wiring and connectors. If the "
-"issue persists, contact support."
-msgstr ""
-
-#. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
-msgid ""
-"MMU unit not responding. Check the wiring and connectors. If the issue "
-"persists, contact support."
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1672
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
-#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
-#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
-#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
-#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
-#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
-#: ../../Firmware/ultralcd.cpp:5704
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2528
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3279
-#: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
-#: ../../Firmware/ultralcd.cpp:4852
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
-#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3576
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
-#: ../../Firmware/ultralcd.cpp:4540
-msgid "Model"
-msgstr ""
-
-#. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
-#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
-#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
-#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
-#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
-#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
-#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
-msgid "More details online."
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
-#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3498
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3499
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3500
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4721
-msgid "Move axis"
-msgstr ""
-
-#. MSG_PROGRESS_MOVING_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:30
-#: ../../Firmware/mmu2_progress_converter.cpp:61
-msgid "Moving selector"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
-#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:5808
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
-#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
-#: ../../Firmware/ultralcd.cpp:5979
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5526
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5399
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
-#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
-#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
-#: ../../Firmware/ultralcd.cpp:5735
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6950
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
-#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3917
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4037
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
-#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
-#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_PROGRESS_OK c=4
-#: ../../Firmware/mmu2_progress_converter.cpp:8
-#: ../../Firmware/mmu2_progress_converter.cpp:34
-msgid "OK"
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
-#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
-#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
-#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1509
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
-#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
-#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1010
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1015
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4855
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:649
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3373
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3367
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
-msgid "PULLEY CANNOT MOVE"
-msgstr ""
-
-#. MSG_PROGRESS_PARK_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:26
-#: ../../Firmware/mmu2_progress_converter.cpp:57
-msgid "Parking selector"
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
-#: ../../Firmware/ultralcd.cpp:5492
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PROGRESS_PERFORM_CUT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:24
-#: ../../Firmware/mmu2_progress_converter.cpp:55
-msgid "Performing cut"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6240
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6944
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4099
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3904
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3901
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3824
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3578
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4041
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
-#: ../../Firmware/messages.cpp:78
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4036
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
-#: ../../Firmware/messages.cpp:83
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4894
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6237
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
-#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1267
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5485
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
-#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:1994
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1991
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1982
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1987
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PROGRESS_PREPARE_BLADE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:22
-#: ../../Firmware/mmu2_progress_converter.cpp:53
-msgid "Preparing blade"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1802
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11560
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7304
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:859
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2357
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1704
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:289
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:295
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
-msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
-msgstr ""
-
-#. MSG_PROGRESS_PUSH_FILAMENT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:23
-#: ../../Firmware/mmu2_progress_converter.cpp:54
-msgid "Pushing filament"
-msgstr ""
-
-#. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
-msgid "QUEUE FULL"
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10896
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3458
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5409
-msgid "Rename"
-msgstr ""
-
-#. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
-msgid ""
-"Requested filament tool is not available on this hardware. Check the G-code "
-"for tool index out of range (T0-T4)."
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
-#: ../../Firmware/ultralcd.cpp:5410
-msgid "Reset"
-msgstr ""
-
-#. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
-msgid "Reset MMU"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4859
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_PROGRESS_RETRACT_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:28
-#: ../../Firmware/mmu2_progress_converter.cpp:59
-msgid "Retract from FINDA"
-msgstr ""
-
-#. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
-msgid "Retry"
-msgstr ""
-
-#. MSG_PROGRESS_RETURN_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:25
-#: ../../Firmware/mmu2_progress_converter.cpp:56
-msgid "Returning selector"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2488
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3846
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4777
-msgid "SD card"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-msgid "SELECTOR CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
-msgid "SELECTOR CANNOT MOVE"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
-#: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5402
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3921
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3794
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
-#: ../../Firmware/ultralcd.cpp:4770
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4073
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3926
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_PROGRESS_SELECT_SLOT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:21
-#: ../../Firmware/mmu2_progress_converter.cpp:52
-msgid "Selecting fil. slot"
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6504
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4846
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6943
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
-#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1541
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1716
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6244
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2764
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
-#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
-#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5852
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2531
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:64
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3784
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4857
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
-#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2530
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3049
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
-#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:100
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5705
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
-#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4907
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5572
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
-#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
-#: ../../Firmware/ultralcd.cpp:5399
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
-msgid "Stop"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
-#: ../../Firmware/ultralcd.cpp:5978
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
-#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
-#: ../../Firmware/ultralcd.cpp:4617
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5581
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:170 ../../Firmware/temperature.cpp:2440
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
-#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
-msgid "TMC DRIVER ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
-#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
-msgid "TMC DRIVER RESET"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
-#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
-msgid "TMC DRIVER SHORTED"
-msgstr ""
-
-#. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
-#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
-msgid "TMC OVERHEAT ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
-#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
-msgid "TMC UNDERVOLTAGE ERR"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4717
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1722
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
-msgid "Testing filament"
-msgstr ""
-
-#. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
-msgid ""
-"The Idler cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
-msgid ""
-"The MMU unit reports its FW version incompatible with the printer's "
-"firmware. Make sure the MMU firmware is up to date."
-msgstr ""
-
-#. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
-msgid ""
-"The Selector cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3929
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
-#: ../../Firmware/ultralcd.cpp:1293
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2378
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2379
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5483
-msgid "Tune"
-msgstr ""
-
-#. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
-msgid "UNLOAD MANUALLY"
-msgstr ""
-
-#. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
-msgid ""
-"Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
-"is free. Check FINDA connection."
-msgstr ""
-
-#. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
-msgid "Unload"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
-#: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5167
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:11
-#: ../../Firmware/mmu2_progress_converter.cpp:37
-msgid "Unloading to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_PULLEY c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:12
-#: ../../Firmware/mmu2_progress_converter.cpp:38
-msgid "Unloading to pulley"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6247
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1725
-msgid "Voltages"
-msgstr ""
-
-#. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
-msgid "WARNING TMC TOO HOT"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4112
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2872
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2904
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4614
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1493
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3571
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
-#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
-#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4837
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4161
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5583
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1714
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3345
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3342
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3323
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3326
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3305
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3311
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
-#: ../../Firmware/ultralcd.cpp:3336
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3314
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3339
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2485
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4162
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
-#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
-#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4163
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2163
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1810
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1814
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1681
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
-msgid "unknown state"
-msgstr ""
-
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:301
-#: ../../Firmware/mmu2_error_converter.cpp:167
-msgid "⏬"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
-#: ../../Firmware/ultralcd.cpp:6071
-msgid "🔃Refresh"
-msgstr ""
diff --git a/lang/po/Firmware_lb.po b/lang/po/Firmware_lb.po
deleted file mode 100644
index a8158c72d..000000000
--- a/lang/po/Firmware_lb.po
+++ /dev/null
@@ -1,2412 +0,0 @@
-# Translation of Prusa-Firmware into Luxembourgish.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:29:04 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:29:04 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: lb\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:291
-#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7017
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
-#: ../../Firmware/ultralcd.cpp:3795
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2661
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7293
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
-#: ../../Firmware/ultralcd.cpp:4131
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1399
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2974
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4842
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:5751
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5558
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2294
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_PROGRESS_AVOID_GRIND c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:16
-#: ../../Firmware/mmu2_progress_converter.cpp:42
-msgid "Avoiding grind"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:6996
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:6995
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
-#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
-#: ../../Firmware/ultralcd.cpp:7812
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
-#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
-#: ../../Firmware/ultralcd.cpp:5863
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:569
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:572
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4854
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
-#: ../../Firmware/Marlin_main.cpp:2992
-#: ../../Firmware/mesh_bed_calibration.cpp:2858
-#: ../../Firmware/mesh_bed_calibration.cpp:2866
-#: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6953
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
-#: ../../Firmware/ultralcd.cpp:1719
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4844
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
-#: ../../Firmware/messages.cpp:81
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
-#: ../../Firmware/ultralcd.cpp:5761
-msgid "Brightness"
-msgstr ""
-
-#. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
-msgid "COMMUNICATION ERROR"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4848
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2937
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:619
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2936
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7295
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:630
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
-#: ../../Firmware/mmu2/errors_list.h:255
-msgid "Can't move Selector or Idler."
-msgstr ""
-
-#. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
-msgid "Cannot perform the action, filament is already loaded. Unload it first."
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7686
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5521
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
-#: ../../Firmware/ultralcd.cpp:5717
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2172
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2220
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
-#: ../../Firmware/ultralcd.cpp:7285
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
-#: ../../Firmware/ultralcd.cpp:7286
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7287
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7284
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7383
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7290
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
-#: ../../Firmware/ultralcd.cpp:7292
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4686
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2223
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3623
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1269
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
-#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
-#: ../../Firmware/ultralcd.cpp:5743
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:586 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3527
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
-#: ../../Firmware/ultralcd.cpp:5552
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
-msgid "Cutter"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1660
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
-msgid "Dim"
-msgstr ""
-
-#. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
-msgid "Disable"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4722
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_PROGRESS_DISENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:10
-#: ../../Firmware/mmu2_progress_converter.cpp:36
-#: ../../Firmware/mmu2_progress_converter.cpp:44
-msgid "Disengaging idler"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4096
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
-msgid "Done"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4165
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_HELP_FIL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:19
-#: ../../Firmware/mmu2_progress_converter.cpp:48
-msgid "ERR Help filament"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_INTERNAL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:18
-#: ../../Firmware/mmu2_progress_converter.cpp:47
-msgid "ERR Internal"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_TMC c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:20
-#: ../../Firmware/mmu2_progress_converter.cpp:49
-msgid "ERR TMC failed"
-msgstr ""
-
-#. MSG_PROGRESS_WAIT_USER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:17
-#: ../../Firmware/mmu2_progress_converter.cpp:46
-msgid "ERR Wait for User"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
-#: ../../Firmware/ultralcd.cpp:5549
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_PROGRESS_EJECT_FILAMENT c=20
-#. @@todo duplicate
-#: ../../Firmware/mmu2_progress_converter.cpp:27
-#: ../../Firmware/mmu2_progress_converter.cpp:58
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6966
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6971
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6957
-msgid "Endstops"
-msgstr ""
-
-#. MSG_PROGRESS_ENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:9
-#: ../../Firmware/mmu2_progress_converter.cpp:35
-#: ../../Firmware/mmu2_progress_converter.cpp:45
-msgid "Engaging idler"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3501
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1715
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
-#: ../../Firmware/ultralcd.cpp:4226
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:4228
-msgid "F. jam detect"
-msgstr ""
-
-#. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4225
-msgid "F. runout"
-msgstr ""
-
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
-msgid "FILAMENT ALREADY LOA"
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
-msgid "FINDA DIDNT TRIGGER"
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
-msgid ""
-"FINDA didn't switch off while unloading filament. Try unloading manually. "
-"Ensure filament can move and FINDA works."
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
-msgid ""
-"FINDA didn't trigger while loading the filament. Ensure the filament can "
-"move and FINDA works."
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
-msgid "FINDA: FILAM. STUCK"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
-#: ../../Firmware/ultralcd.cpp:4237
-msgid "FS Action"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
-msgid "FSENSOR DIDNT TRIGG."
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
-msgid "FSENSOR TOO EARLY"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
-msgid "FSENSOR: FIL. STUCK"
-msgstr ""
-
-#. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
-msgid "FW RUNTIME ERROR"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5576
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5579
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7012
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
-#: ../../Firmware/ultralcd.cpp:5865
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
-#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
-#: ../../Firmware/ultralcd.cpp:7283
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:5728
-msgid "Fans check"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:13
-#: ../../Firmware/mmu2_progress_converter.cpp:39
-msgid "Feeding to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FSENSOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:31
-#: ../../Firmware/mmu2_progress_converter.cpp:62
-msgid "Feeding to FSensor"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_EXTRUDER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:14
-#: ../../Firmware/mmu2_progress_converter.cpp:40
-msgid "Feeding to extruder"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_NOZZLE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:15
-#: ../../Firmware/mmu2_progress_converter.cpp:41
-msgid "Feeding to nozzle"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
-#: ../../Firmware/ultralcd.cpp:1324
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5721
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3795
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
-#: ../../Firmware/ultralcd.cpp:2287
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2222
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
-#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
-#: ../../Firmware/ultralcd.cpp:7310
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
-msgid ""
-"Filament sensor didn't switch off while unloading filament. Ensure filament "
-"can move and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
-msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
-msgid ""
-"Filament sensor triggered too early while loading to extruder. Check there "
-"isn't anything stuck in PTFE tube. Check that sensor reads properly."
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2356
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7441
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
-#: ../../Firmware/ultralcd.cpp:5407
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4021
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5711
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7001
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:402
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:409
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:135 ../../Firmware/util.cpp:323
-#: ../../Firmware/util.cpp:454
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/util.cpp:329
-#: ../../Firmware/util.cpp:460
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:370
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:377
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
-#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6949
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:561
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9474
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:564
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Salut, ech sinn Aren Original Prusa i3 Drecker. Wellt Dir datt ech Iech "
-"duerch de Setupprozess guideieren?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "High power"
-msgstr ""
-
-#. MSG_PROGRESS_HOMING c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:29
-#: ../../Firmware/mmu2_progress_converter.cpp:60
-msgid "Homing"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7301
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4030
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4038
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
-msgid "IDLER CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
-msgid "IDLER CANNOT MOVE"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
-msgid "INSPECT FINDA"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
-msgid "INVALID TOOL"
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4104
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2530
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5528
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2158
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6215
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
-msgid ""
-"Internal runtime error. Try resetting the MMU unit or updating the firmware. "
-"If the issue persists, contact support."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
-#: ../../Firmware/ultralcd.cpp:4063
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2252 ../../Firmware/messages.cpp:51
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
-#: ../../Firmware/ultralcd.cpp:1292
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
-#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2487
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4755
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
-#: ../../Firmware/ultralcd.cpp:5476
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
-#: ../../Firmware/ultralcd.cpp:5152
-msgid "Load All"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
-#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
-#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5547
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_TEST c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
-msgid "Loading Test"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2194
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
-#: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:6989
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4418
-msgid "Loud"
-msgstr ""
-
-#. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
-msgid "MMU FW UPDATE NEEDED"
-msgstr ""
-
-#. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
-msgid "MMU Firmware internal error, please reset the MMU."
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
-#: ../../Firmware/ultralcd.cpp:4369
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
-msgid "MMU NOT RESPONDING"
-msgstr ""
-
-#. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:619
-msgid "MMU Retry: Restoring temperature..."
-msgstr ""
-
-#. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
-#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
-msgid "MMU SELFTEST FAILED"
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
-#: ../../Firmware/ultralcd.cpp:1208
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
-msgid ""
-"MMU unit not responding correctly. Check the wiring and connectors. If the "
-"issue persists, contact support."
-msgstr ""
-
-#. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
-msgid ""
-"MMU unit not responding. Check the wiring and connectors. If the issue "
-"persists, contact support."
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1672
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
-#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
-#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
-#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
-#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
-#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
-#: ../../Firmware/ultralcd.cpp:5704
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2528
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3279
-#: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
-#: ../../Firmware/ultralcd.cpp:4852
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
-#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3576
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
-#: ../../Firmware/ultralcd.cpp:4540
-msgid "Model"
-msgstr ""
-
-#. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
-#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
-#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
-#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
-#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
-#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
-#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
-msgid "More details online."
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
-#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3498
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3499
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3500
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4721
-msgid "Move axis"
-msgstr ""
-
-#. MSG_PROGRESS_MOVING_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:30
-#: ../../Firmware/mmu2_progress_converter.cpp:61
-msgid "Moving selector"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
-#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:5808
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
-#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
-#: ../../Firmware/ultralcd.cpp:5979
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5526
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5399
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
-#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
-#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
-#: ../../Firmware/ultralcd.cpp:5735
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6950
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
-#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3917
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4037
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
-#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
-#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_PROGRESS_OK c=4
-#: ../../Firmware/mmu2_progress_converter.cpp:8
-#: ../../Firmware/mmu2_progress_converter.cpp:34
-msgid "OK"
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
-#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
-#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
-#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1509
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
-#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
-#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1010
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1015
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4855
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:649
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3373
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3367
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
-msgid "PULLEY CANNOT MOVE"
-msgstr ""
-
-#. MSG_PROGRESS_PARK_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:26
-#: ../../Firmware/mmu2_progress_converter.cpp:57
-msgid "Parking selector"
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
-#: ../../Firmware/ultralcd.cpp:5492
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PROGRESS_PERFORM_CUT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:24
-#: ../../Firmware/mmu2_progress_converter.cpp:55
-msgid "Performing cut"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6240
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6944
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4099
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3904
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3901
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3824
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3578
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4041
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
-#: ../../Firmware/messages.cpp:78
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4036
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
-#: ../../Firmware/messages.cpp:83
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4894
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6237
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
-#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1267
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5485
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
-#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:1994
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1991
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1982
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1987
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PROGRESS_PREPARE_BLADE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:22
-#: ../../Firmware/mmu2_progress_converter.cpp:53
-msgid "Preparing blade"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1802
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11560
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7304
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:859
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2357
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1704
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:289
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:295
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
-msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
-msgstr ""
-
-#. MSG_PROGRESS_PUSH_FILAMENT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:23
-#: ../../Firmware/mmu2_progress_converter.cpp:54
-msgid "Pushing filament"
-msgstr ""
-
-#. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
-msgid "QUEUE FULL"
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10896
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3458
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5409
-msgid "Rename"
-msgstr ""
-
-#. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
-msgid ""
-"Requested filament tool is not available on this hardware. Check the G-code "
-"for tool index out of range (T0-T4)."
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
-#: ../../Firmware/ultralcd.cpp:5410
-msgid "Reset"
-msgstr ""
-
-#. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
-msgid "Reset MMU"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4859
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_PROGRESS_RETRACT_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:28
-#: ../../Firmware/mmu2_progress_converter.cpp:59
-msgid "Retract from FINDA"
-msgstr ""
-
-#. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
-msgid "Retry"
-msgstr ""
-
-#. MSG_PROGRESS_RETURN_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:25
-#: ../../Firmware/mmu2_progress_converter.cpp:56
-msgid "Returning selector"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2488
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3846
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4777
-msgid "SD card"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-msgid "SELECTOR CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
-msgid "SELECTOR CANNOT MOVE"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
-#: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5402
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3921
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3794
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
-#: ../../Firmware/ultralcd.cpp:4770
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4073
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3926
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_PROGRESS_SELECT_SLOT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:21
-#: ../../Firmware/mmu2_progress_converter.cpp:52
-msgid "Selecting fil. slot"
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6504
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4846
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6943
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
-#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1541
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1716
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6244
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2764
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
-#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
-#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5852
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2531
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:64
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3784
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4857
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
-#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2530
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3049
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
-#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:100
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5705
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
-#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4907
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5572
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
-#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
-#: ../../Firmware/ultralcd.cpp:5399
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
-msgid "Stop"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
-#: ../../Firmware/ultralcd.cpp:5978
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
-#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
-#: ../../Firmware/ultralcd.cpp:4617
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5581
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:170 ../../Firmware/temperature.cpp:2440
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
-#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
-msgid "TMC DRIVER ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
-#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
-msgid "TMC DRIVER RESET"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
-#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
-msgid "TMC DRIVER SHORTED"
-msgstr ""
-
-#. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
-#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
-msgid "TMC OVERHEAT ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
-#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
-msgid "TMC UNDERVOLTAGE ERR"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4717
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1722
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
-msgid "Testing filament"
-msgstr ""
-
-#. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
-msgid ""
-"The Idler cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
-msgid ""
-"The MMU unit reports its FW version incompatible with the printer's "
-"firmware. Make sure the MMU firmware is up to date."
-msgstr ""
-
-#. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
-msgid ""
-"The Selector cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3929
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
-#: ../../Firmware/ultralcd.cpp:1293
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2378
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2379
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5483
-msgid "Tune"
-msgstr ""
-
-#. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
-msgid "UNLOAD MANUALLY"
-msgstr ""
-
-#. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
-msgid ""
-"Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
-"is free. Check FINDA connection."
-msgstr ""
-
-#. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
-msgid "Unload"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
-#: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5167
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:11
-#: ../../Firmware/mmu2_progress_converter.cpp:37
-msgid "Unloading to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_PULLEY c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:12
-#: ../../Firmware/mmu2_progress_converter.cpp:38
-msgid "Unloading to pulley"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6247
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1725
-msgid "Voltages"
-msgstr ""
-
-#. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
-msgid "WARNING TMC TOO HOT"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4112
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2872
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2904
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4614
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1493
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3571
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
-#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
-#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4837
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4161
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5583
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1714
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3345
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3342
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3323
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3326
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3305
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3311
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
-#: ../../Firmware/ultralcd.cpp:3336
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3314
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3339
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2485
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4162
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
-#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
-#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4163
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2163
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1810
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1814
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1681
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
-msgid "unknown state"
-msgstr ""
-
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:301
-#: ../../Firmware/mmu2_error_converter.cpp:167
-msgid "⏬"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
-#: ../../Firmware/ultralcd.cpp:6071
-msgid "🔃Refresh"
-msgstr ""
diff --git a/lang/po/Firmware_lt.po b/lang/po/Firmware_lt.po
deleted file mode 100644
index acfb73552..000000000
--- a/lang/po/Firmware_lt.po
+++ /dev/null
@@ -1,2412 +0,0 @@
-# Translation of Prusa-Firmware into Lithuanian.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:29:10 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:29:10 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: lt\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:291
-#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7017
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
-#: ../../Firmware/ultralcd.cpp:3795
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2661
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7293
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
-#: ../../Firmware/ultralcd.cpp:4131
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1399
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2974
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4842
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:5751
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5558
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2294
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_PROGRESS_AVOID_GRIND c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:16
-#: ../../Firmware/mmu2_progress_converter.cpp:42
-msgid "Avoiding grind"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:6996
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:6995
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
-#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
-#: ../../Firmware/ultralcd.cpp:7812
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
-#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
-#: ../../Firmware/ultralcd.cpp:5863
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:569
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:572
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4854
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
-#: ../../Firmware/Marlin_main.cpp:2992
-#: ../../Firmware/mesh_bed_calibration.cpp:2858
-#: ../../Firmware/mesh_bed_calibration.cpp:2866
-#: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6953
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
-#: ../../Firmware/ultralcd.cpp:1719
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4844
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
-#: ../../Firmware/messages.cpp:81
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
-#: ../../Firmware/ultralcd.cpp:5761
-msgid "Brightness"
-msgstr ""
-
-#. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
-msgid "COMMUNICATION ERROR"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4848
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2937
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:619
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2936
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7295
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:630
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
-#: ../../Firmware/mmu2/errors_list.h:255
-msgid "Can't move Selector or Idler."
-msgstr ""
-
-#. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
-msgid "Cannot perform the action, filament is already loaded. Unload it first."
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7686
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5521
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
-#: ../../Firmware/ultralcd.cpp:5717
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2172
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2220
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
-#: ../../Firmware/ultralcd.cpp:7285
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
-#: ../../Firmware/ultralcd.cpp:7286
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7287
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7284
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7383
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7290
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
-#: ../../Firmware/ultralcd.cpp:7292
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4686
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2223
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3623
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1269
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
-#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
-#: ../../Firmware/ultralcd.cpp:5743
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:586 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3527
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
-#: ../../Firmware/ultralcd.cpp:5552
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
-msgid "Cutter"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1660
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
-msgid "Dim"
-msgstr ""
-
-#. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
-msgid "Disable"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4722
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_PROGRESS_DISENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:10
-#: ../../Firmware/mmu2_progress_converter.cpp:36
-#: ../../Firmware/mmu2_progress_converter.cpp:44
-msgid "Disengaging idler"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4096
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
-msgid "Done"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4165
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_HELP_FIL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:19
-#: ../../Firmware/mmu2_progress_converter.cpp:48
-msgid "ERR Help filament"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_INTERNAL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:18
-#: ../../Firmware/mmu2_progress_converter.cpp:47
-msgid "ERR Internal"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_TMC c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:20
-#: ../../Firmware/mmu2_progress_converter.cpp:49
-msgid "ERR TMC failed"
-msgstr ""
-
-#. MSG_PROGRESS_WAIT_USER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:17
-#: ../../Firmware/mmu2_progress_converter.cpp:46
-msgid "ERR Wait for User"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
-#: ../../Firmware/ultralcd.cpp:5549
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_PROGRESS_EJECT_FILAMENT c=20
-#. @@todo duplicate
-#: ../../Firmware/mmu2_progress_converter.cpp:27
-#: ../../Firmware/mmu2_progress_converter.cpp:58
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6966
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6971
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6957
-msgid "Endstops"
-msgstr ""
-
-#. MSG_PROGRESS_ENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:9
-#: ../../Firmware/mmu2_progress_converter.cpp:35
-#: ../../Firmware/mmu2_progress_converter.cpp:45
-msgid "Engaging idler"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3501
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1715
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
-#: ../../Firmware/ultralcd.cpp:4226
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:4228
-msgid "F. jam detect"
-msgstr ""
-
-#. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4225
-msgid "F. runout"
-msgstr ""
-
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
-msgid "FILAMENT ALREADY LOA"
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
-msgid "FINDA DIDNT TRIGGER"
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
-msgid ""
-"FINDA didn't switch off while unloading filament. Try unloading manually. "
-"Ensure filament can move and FINDA works."
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
-msgid ""
-"FINDA didn't trigger while loading the filament. Ensure the filament can "
-"move and FINDA works."
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
-msgid "FINDA: FILAM. STUCK"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
-#: ../../Firmware/ultralcd.cpp:4237
-msgid "FS Action"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
-msgid "FSENSOR DIDNT TRIGG."
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
-msgid "FSENSOR TOO EARLY"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
-msgid "FSENSOR: FIL. STUCK"
-msgstr ""
-
-#. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
-msgid "FW RUNTIME ERROR"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5576
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5579
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7012
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
-#: ../../Firmware/ultralcd.cpp:5865
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
-#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
-#: ../../Firmware/ultralcd.cpp:7283
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:5728
-msgid "Fans check"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:13
-#: ../../Firmware/mmu2_progress_converter.cpp:39
-msgid "Feeding to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FSENSOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:31
-#: ../../Firmware/mmu2_progress_converter.cpp:62
-msgid "Feeding to FSensor"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_EXTRUDER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:14
-#: ../../Firmware/mmu2_progress_converter.cpp:40
-msgid "Feeding to extruder"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_NOZZLE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:15
-#: ../../Firmware/mmu2_progress_converter.cpp:41
-msgid "Feeding to nozzle"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
-#: ../../Firmware/ultralcd.cpp:1324
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5721
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3795
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
-#: ../../Firmware/ultralcd.cpp:2287
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2222
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
-#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
-#: ../../Firmware/ultralcd.cpp:7310
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
-msgid ""
-"Filament sensor didn't switch off while unloading filament. Ensure filament "
-"can move and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
-msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
-msgid ""
-"Filament sensor triggered too early while loading to extruder. Check there "
-"isn't anything stuck in PTFE tube. Check that sensor reads properly."
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2356
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7441
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
-#: ../../Firmware/ultralcd.cpp:5407
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4021
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5711
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7001
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:402
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:409
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:135 ../../Firmware/util.cpp:323
-#: ../../Firmware/util.cpp:454
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/util.cpp:329
-#: ../../Firmware/util.cpp:460
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:370
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:377
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
-#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6949
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:561
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9474
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:564
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Sveiki, as esu jusu originalus Prusa i3 spausdintuvas. Ar noretumete, kad "
-"padetu jums atlikti sarankos procesa?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "High power"
-msgstr ""
-
-#. MSG_PROGRESS_HOMING c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:29
-#: ../../Firmware/mmu2_progress_converter.cpp:60
-msgid "Homing"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7301
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4030
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4038
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
-msgid "IDLER CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
-msgid "IDLER CANNOT MOVE"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
-msgid "INSPECT FINDA"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
-msgid "INVALID TOOL"
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4104
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2530
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5528
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2158
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6215
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
-msgid ""
-"Internal runtime error. Try resetting the MMU unit or updating the firmware. "
-"If the issue persists, contact support."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
-#: ../../Firmware/ultralcd.cpp:4063
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2252 ../../Firmware/messages.cpp:51
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
-#: ../../Firmware/ultralcd.cpp:1292
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
-#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2487
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4755
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
-#: ../../Firmware/ultralcd.cpp:5476
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
-#: ../../Firmware/ultralcd.cpp:5152
-msgid "Load All"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
-#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
-#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5547
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_TEST c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
-msgid "Loading Test"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2194
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
-#: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:6989
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4418
-msgid "Loud"
-msgstr ""
-
-#. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
-msgid "MMU FW UPDATE NEEDED"
-msgstr ""
-
-#. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
-msgid "MMU Firmware internal error, please reset the MMU."
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
-#: ../../Firmware/ultralcd.cpp:4369
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
-msgid "MMU NOT RESPONDING"
-msgstr ""
-
-#. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:619
-msgid "MMU Retry: Restoring temperature..."
-msgstr ""
-
-#. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
-#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
-msgid "MMU SELFTEST FAILED"
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
-#: ../../Firmware/ultralcd.cpp:1208
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
-msgid ""
-"MMU unit not responding correctly. Check the wiring and connectors. If the "
-"issue persists, contact support."
-msgstr ""
-
-#. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
-msgid ""
-"MMU unit not responding. Check the wiring and connectors. If the issue "
-"persists, contact support."
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1672
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
-#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
-#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
-#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
-#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
-#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
-#: ../../Firmware/ultralcd.cpp:5704
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2528
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3279
-#: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
-#: ../../Firmware/ultralcd.cpp:4852
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
-#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3576
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
-#: ../../Firmware/ultralcd.cpp:4540
-msgid "Model"
-msgstr ""
-
-#. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
-#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
-#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
-#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
-#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
-#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
-#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
-msgid "More details online."
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
-#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3498
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3499
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3500
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4721
-msgid "Move axis"
-msgstr ""
-
-#. MSG_PROGRESS_MOVING_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:30
-#: ../../Firmware/mmu2_progress_converter.cpp:61
-msgid "Moving selector"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
-#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:5808
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
-#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
-#: ../../Firmware/ultralcd.cpp:5979
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5526
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5399
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
-#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
-#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
-#: ../../Firmware/ultralcd.cpp:5735
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6950
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
-#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3917
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4037
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
-#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
-#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_PROGRESS_OK c=4
-#: ../../Firmware/mmu2_progress_converter.cpp:8
-#: ../../Firmware/mmu2_progress_converter.cpp:34
-msgid "OK"
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
-#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
-#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
-#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1509
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
-#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
-#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1010
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1015
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4855
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:649
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3373
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3367
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
-msgid "PULLEY CANNOT MOVE"
-msgstr ""
-
-#. MSG_PROGRESS_PARK_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:26
-#: ../../Firmware/mmu2_progress_converter.cpp:57
-msgid "Parking selector"
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
-#: ../../Firmware/ultralcd.cpp:5492
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PROGRESS_PERFORM_CUT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:24
-#: ../../Firmware/mmu2_progress_converter.cpp:55
-msgid "Performing cut"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6240
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6944
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4099
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3904
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3901
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3824
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3578
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4041
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
-#: ../../Firmware/messages.cpp:78
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4036
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
-#: ../../Firmware/messages.cpp:83
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4894
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6237
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
-#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1267
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5485
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
-#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:1994
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1991
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1982
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1987
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PROGRESS_PREPARE_BLADE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:22
-#: ../../Firmware/mmu2_progress_converter.cpp:53
-msgid "Preparing blade"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1802
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11560
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7304
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:859
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2357
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1704
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:289
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:295
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
-msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
-msgstr ""
-
-#. MSG_PROGRESS_PUSH_FILAMENT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:23
-#: ../../Firmware/mmu2_progress_converter.cpp:54
-msgid "Pushing filament"
-msgstr ""
-
-#. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
-msgid "QUEUE FULL"
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10896
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3458
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5409
-msgid "Rename"
-msgstr ""
-
-#. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
-msgid ""
-"Requested filament tool is not available on this hardware. Check the G-code "
-"for tool index out of range (T0-T4)."
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
-#: ../../Firmware/ultralcd.cpp:5410
-msgid "Reset"
-msgstr ""
-
-#. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
-msgid "Reset MMU"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4859
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_PROGRESS_RETRACT_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:28
-#: ../../Firmware/mmu2_progress_converter.cpp:59
-msgid "Retract from FINDA"
-msgstr ""
-
-#. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
-msgid "Retry"
-msgstr ""
-
-#. MSG_PROGRESS_RETURN_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:25
-#: ../../Firmware/mmu2_progress_converter.cpp:56
-msgid "Returning selector"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2488
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3846
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4777
-msgid "SD card"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-msgid "SELECTOR CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
-msgid "SELECTOR CANNOT MOVE"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
-#: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5402
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3921
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3794
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
-#: ../../Firmware/ultralcd.cpp:4770
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4073
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3926
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_PROGRESS_SELECT_SLOT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:21
-#: ../../Firmware/mmu2_progress_converter.cpp:52
-msgid "Selecting fil. slot"
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6504
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4846
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6943
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
-#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1541
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1716
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6244
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2764
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
-#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
-#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5852
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2531
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:64
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3784
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4857
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
-#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2530
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3049
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
-#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:100
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5705
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
-#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4907
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5572
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
-#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
-#: ../../Firmware/ultralcd.cpp:5399
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
-msgid "Stop"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
-#: ../../Firmware/ultralcd.cpp:5978
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
-#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
-#: ../../Firmware/ultralcd.cpp:4617
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5581
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:170 ../../Firmware/temperature.cpp:2440
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
-#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
-msgid "TMC DRIVER ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
-#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
-msgid "TMC DRIVER RESET"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
-#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
-msgid "TMC DRIVER SHORTED"
-msgstr ""
-
-#. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
-#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
-msgid "TMC OVERHEAT ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
-#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
-msgid "TMC UNDERVOLTAGE ERR"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4717
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1722
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
-msgid "Testing filament"
-msgstr ""
-
-#. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
-msgid ""
-"The Idler cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
-msgid ""
-"The MMU unit reports its FW version incompatible with the printer's "
-"firmware. Make sure the MMU firmware is up to date."
-msgstr ""
-
-#. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
-msgid ""
-"The Selector cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3929
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
-#: ../../Firmware/ultralcd.cpp:1293
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2378
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2379
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5483
-msgid "Tune"
-msgstr ""
-
-#. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
-msgid "UNLOAD MANUALLY"
-msgstr ""
-
-#. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
-msgid ""
-"Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
-"is free. Check FINDA connection."
-msgstr ""
-
-#. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
-msgid "Unload"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
-#: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5167
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:11
-#: ../../Firmware/mmu2_progress_converter.cpp:37
-msgid "Unloading to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_PULLEY c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:12
-#: ../../Firmware/mmu2_progress_converter.cpp:38
-msgid "Unloading to pulley"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6247
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1725
-msgid "Voltages"
-msgstr ""
-
-#. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
-msgid "WARNING TMC TOO HOT"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4112
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2872
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2904
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4614
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1493
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3571
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
-#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
-#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4837
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4161
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5583
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1714
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3345
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3342
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3323
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3326
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3305
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3311
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
-#: ../../Firmware/ultralcd.cpp:3336
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3314
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3339
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2485
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4162
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
-#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
-#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4163
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2163
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1810
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1814
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1681
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
-msgid "unknown state"
-msgstr ""
-
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:301
-#: ../../Firmware/mmu2_error_converter.cpp:167
-msgid "⏬"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
-#: ../../Firmware/ultralcd.cpp:6071
-msgid "🔃Refresh"
-msgstr ""
diff --git a/lang/po/Firmware_sl.po b/lang/po/Firmware_sl.po
deleted file mode 100644
index fd71c6064..000000000
--- a/lang/po/Firmware_sl.po
+++ /dev/null
@@ -1,2412 +0,0 @@
-# Translation of Prusa-Firmware into Slovanian.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:31:25 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:31:25 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: sl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:291
-#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7017
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
-#: ../../Firmware/ultralcd.cpp:3795
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2661
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7293
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
-#: ../../Firmware/ultralcd.cpp:4131
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1399
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2974
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4842
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:5751
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5558
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2294
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_PROGRESS_AVOID_GRIND c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:16
-#: ../../Firmware/mmu2_progress_converter.cpp:42
-msgid "Avoiding grind"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:6996
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:6995
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
-#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
-#: ../../Firmware/ultralcd.cpp:7812
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
-#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
-#: ../../Firmware/ultralcd.cpp:5863
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:569
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:572
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4854
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
-#: ../../Firmware/Marlin_main.cpp:2992
-#: ../../Firmware/mesh_bed_calibration.cpp:2858
-#: ../../Firmware/mesh_bed_calibration.cpp:2866
-#: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6953
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
-#: ../../Firmware/ultralcd.cpp:1719
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4844
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
-#: ../../Firmware/messages.cpp:81
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
-#: ../../Firmware/ultralcd.cpp:5761
-msgid "Brightness"
-msgstr ""
-
-#. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
-msgid "COMMUNICATION ERROR"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4848
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2937
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:619
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2936
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7295
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:630
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
-#: ../../Firmware/mmu2/errors_list.h:255
-msgid "Can't move Selector or Idler."
-msgstr ""
-
-#. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
-msgid "Cannot perform the action, filament is already loaded. Unload it first."
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7686
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5521
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
-#: ../../Firmware/ultralcd.cpp:5717
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2172
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2220
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
-#: ../../Firmware/ultralcd.cpp:7285
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
-#: ../../Firmware/ultralcd.cpp:7286
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7287
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7284
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7383
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7290
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
-#: ../../Firmware/ultralcd.cpp:7292
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4686
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2223
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3623
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1269
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
-#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
-#: ../../Firmware/ultralcd.cpp:5743
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:586 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3527
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
-#: ../../Firmware/ultralcd.cpp:5552
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
-msgid "Cutter"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1660
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
-msgid "Dim"
-msgstr ""
-
-#. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
-msgid "Disable"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4722
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_PROGRESS_DISENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:10
-#: ../../Firmware/mmu2_progress_converter.cpp:36
-#: ../../Firmware/mmu2_progress_converter.cpp:44
-msgid "Disengaging idler"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4096
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
-msgid "Done"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4165
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_HELP_FIL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:19
-#: ../../Firmware/mmu2_progress_converter.cpp:48
-msgid "ERR Help filament"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_INTERNAL c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:18
-#: ../../Firmware/mmu2_progress_converter.cpp:47
-msgid "ERR Internal"
-msgstr ""
-
-#. MSG_PROGRESS_ERR_TMC c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:20
-#: ../../Firmware/mmu2_progress_converter.cpp:49
-msgid "ERR TMC failed"
-msgstr ""
-
-#. MSG_PROGRESS_WAIT_USER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:17
-#: ../../Firmware/mmu2_progress_converter.cpp:46
-msgid "ERR Wait for User"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
-#: ../../Firmware/ultralcd.cpp:5549
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_PROGRESS_EJECT_FILAMENT c=20
-#. @@todo duplicate
-#: ../../Firmware/mmu2_progress_converter.cpp:27
-#: ../../Firmware/mmu2_progress_converter.cpp:58
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6966
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6971
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6957
-msgid "Endstops"
-msgstr ""
-
-#. MSG_PROGRESS_ENGAGE_IDLER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:9
-#: ../../Firmware/mmu2_progress_converter.cpp:35
-#: ../../Firmware/mmu2_progress_converter.cpp:45
-msgid "Engaging idler"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3501
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1715
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
-#: ../../Firmware/ultralcd.cpp:4226
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:4228
-msgid "F. jam detect"
-msgstr ""
-
-#. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4225
-msgid "F. runout"
-msgstr ""
-
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
-msgid "FILAMENT ALREADY LOA"
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
-msgid "FINDA DIDNT TRIGGER"
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
-msgid ""
-"FINDA didn't switch off while unloading filament. Try unloading manually. "
-"Ensure filament can move and FINDA works."
-msgstr ""
-
-#. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
-msgid ""
-"FINDA didn't trigger while loading the filament. Ensure the filament can "
-"move and FINDA works."
-msgstr ""
-
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
-msgid "FINDA: FILAM. STUCK"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
-#: ../../Firmware/ultralcd.cpp:4237
-msgid "FS Action"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
-msgid "FSENSOR DIDNT TRIGG."
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
-msgid "FSENSOR TOO EARLY"
-msgstr ""
-
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
-msgid "FSENSOR: FIL. STUCK"
-msgstr ""
-
-#. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
-msgid "FW RUNTIME ERROR"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5576
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5579
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7012
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
-#: ../../Firmware/ultralcd.cpp:5865
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
-#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
-#: ../../Firmware/ultralcd.cpp:7283
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:5728
-msgid "Fans check"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:13
-#: ../../Firmware/mmu2_progress_converter.cpp:39
-msgid "Feeding to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_FSENSOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:31
-#: ../../Firmware/mmu2_progress_converter.cpp:62
-msgid "Feeding to FSensor"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_EXTRUDER c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:14
-#: ../../Firmware/mmu2_progress_converter.cpp:40
-msgid "Feeding to extruder"
-msgstr ""
-
-#. MSG_PROGRESS_FEED_NOZZLE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:15
-#: ../../Firmware/mmu2_progress_converter.cpp:41
-msgid "Feeding to nozzle"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
-#: ../../Firmware/ultralcd.cpp:1324
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5721
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3795
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
-#: ../../Firmware/ultralcd.cpp:2287
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2222
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
-#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
-#: ../../Firmware/ultralcd.cpp:7310
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
-msgid ""
-"Filament sensor didn't switch off while unloading filament. Ensure filament "
-"can move and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
-msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
-msgstr ""
-
-#. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
-msgid ""
-"Filament sensor triggered too early while loading to extruder. Check there "
-"isn't anything stuck in PTFE tube. Check that sensor reads properly."
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2356
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7441
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
-#: ../../Firmware/ultralcd.cpp:5407
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4021
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5711
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7001
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:402
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:409
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:135 ../../Firmware/util.cpp:323
-#: ../../Firmware/util.cpp:454
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/util.cpp:329
-#: ../../Firmware/util.cpp:460
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:370
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:377
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
-#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6949
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:561
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9474
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:564
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Zivjo, jaz sem vas originalni tiskalnik Prusa i3. Ali zelite, da vas vodim "
-"skozi postopek nastavitve?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "High power"
-msgstr ""
-
-#. MSG_PROGRESS_HOMING c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:29
-#: ../../Firmware/mmu2_progress_converter.cpp:60
-msgid "Homing"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7301
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4030
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4038
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
-msgid "IDLER CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
-msgid "IDLER CANNOT MOVE"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
-msgid "INSPECT FINDA"
-msgstr ""
-
-#. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
-msgid "INVALID TOOL"
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4104
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2530
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5528
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2158
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6215
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
-msgid ""
-"Internal runtime error. Try resetting the MMU unit or updating the firmware. "
-"If the issue persists, contact support."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
-#: ../../Firmware/ultralcd.cpp:4063
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2252 ../../Firmware/messages.cpp:51
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
-#: ../../Firmware/ultralcd.cpp:1292
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
-#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2487
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
-#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4755
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
-#: ../../Firmware/ultralcd.cpp:5476
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
-#: ../../Firmware/ultralcd.cpp:5152
-msgid "Load All"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
-#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
-#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5547
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_TEST c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
-msgid "Loading Test"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2194
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
-#: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:6989
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4418
-msgid "Loud"
-msgstr ""
-
-#. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
-msgid "MMU FW UPDATE NEEDED"
-msgstr ""
-
-#. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
-msgid "MMU Firmware internal error, please reset the MMU."
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
-#: ../../Firmware/ultralcd.cpp:4369
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
-msgid "MMU NOT RESPONDING"
-msgstr ""
-
-#. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:619
-msgid "MMU Retry: Restoring temperature..."
-msgstr ""
-
-#. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
-#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
-msgid "MMU SELFTEST FAILED"
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
-#: ../../Firmware/ultralcd.cpp:1208
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
-msgid ""
-"MMU unit not responding correctly. Check the wiring and connectors. If the "
-"issue persists, contact support."
-msgstr ""
-
-#. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
-msgid ""
-"MMU unit not responding. Check the wiring and connectors. If the issue "
-"persists, contact support."
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1672
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
-#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
-#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
-#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
-#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
-#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
-#: ../../Firmware/ultralcd.cpp:5704
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2528
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3279
-#: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
-#: ../../Firmware/ultralcd.cpp:4852
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
-#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
-#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
-#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3576
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
-#: ../../Firmware/ultralcd.cpp:4540
-msgid "Model"
-msgstr ""
-
-#. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
-#: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
-#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
-#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
-#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
-#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
-#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
-msgid "More details online."
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
-#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3498
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3499
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3500
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4721
-msgid "Move axis"
-msgstr ""
-
-#. MSG_PROGRESS_MOVING_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:30
-#: ../../Firmware/mmu2_progress_converter.cpp:61
-msgid "Moving selector"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
-#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
-#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
-#: ../../Firmware/ultralcd.cpp:5808
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
-#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
-#: ../../Firmware/ultralcd.cpp:5979
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5526
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5399
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
-#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
-#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
-#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
-#: ../../Firmware/ultralcd.cpp:5735
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6950
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
-#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3917
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4037
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
-#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
-#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_PROGRESS_OK c=4
-#: ../../Firmware/mmu2_progress_converter.cpp:8
-#: ../../Firmware/mmu2_progress_converter.cpp:34
-msgid "OK"
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
-#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
-#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
-#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1509
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
-#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
-#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
-#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
-#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1010
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1015
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4855
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:649
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
-#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3373
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3367
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
-msgid "PULLEY CANNOT MOVE"
-msgstr ""
-
-#. MSG_PROGRESS_PARK_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:26
-#: ../../Firmware/mmu2_progress_converter.cpp:57
-msgid "Parking selector"
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
-#: ../../Firmware/ultralcd.cpp:5492
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PROGRESS_PERFORM_CUT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:24
-#: ../../Firmware/mmu2_progress_converter.cpp:55
-msgid "Performing cut"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6240
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6944
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4099
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3904
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3901
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3824
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3578
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4041
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
-#: ../../Firmware/messages.cpp:78
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4036
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
-#: ../../Firmware/messages.cpp:83
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4894
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6237
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
-#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1267
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5485
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
-#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:1994
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1991
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1982
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1987
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PROGRESS_PREPARE_BLADE c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:22
-#: ../../Firmware/mmu2_progress_converter.cpp:53
-msgid "Preparing blade"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1802
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11560
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
-#: ../../Firmware/ultralcd.cpp:7304
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:859
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2357
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1704
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:289
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:295
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
-msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
-msgstr ""
-
-#. MSG_PROGRESS_PUSH_FILAMENT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:23
-#: ../../Firmware/mmu2_progress_converter.cpp:54
-msgid "Pushing filament"
-msgstr ""
-
-#. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
-msgid "QUEUE FULL"
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10896
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3458
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5409
-msgid "Rename"
-msgstr ""
-
-#. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
-msgid ""
-"Requested filament tool is not available on this hardware. Check the G-code "
-"for tool index out of range (T0-T4)."
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
-#: ../../Firmware/ultralcd.cpp:5410
-msgid "Reset"
-msgstr ""
-
-#. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
-msgid "Reset MMU"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4859
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_PROGRESS_RETRACT_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:28
-#: ../../Firmware/mmu2_progress_converter.cpp:59
-msgid "Retract from FINDA"
-msgstr ""
-
-#. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
-msgid "Retry"
-msgstr ""
-
-#. MSG_PROGRESS_RETURN_SELECTOR c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:25
-#: ../../Firmware/mmu2_progress_converter.cpp:56
-msgid "Returning selector"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2488
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3846
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4777
-msgid "SD card"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-msgid "SELECTOR CANNOT HOME"
-msgstr ""
-
-#. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
-msgid "SELECTOR CANNOT MOVE"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
-#: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5402
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3921
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
-#: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3794
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
-#: ../../Firmware/ultralcd.cpp:4770
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4073
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3926
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_PROGRESS_SELECT_SLOT c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:21
-#: ../../Firmware/mmu2_progress_converter.cpp:52
-msgid "Selecting fil. slot"
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6504
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4846
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6943
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
-#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1541
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1716
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6244
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2764
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
-#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
-#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5852
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2531
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:64
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3784
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4857
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
-#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2530
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3049
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
-#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:100
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
-#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5705
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
-#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4907
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5572
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
-#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
-#: ../../Firmware/ultralcd.cpp:5399
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
-msgid "Stop"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
-#: ../../Firmware/ultralcd.cpp:5978
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
-#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
-#: ../../Firmware/ultralcd.cpp:4617
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5581
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:170 ../../Firmware/temperature.cpp:2440
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
-#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
-msgid "TMC DRIVER ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
-#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
-msgid "TMC DRIVER RESET"
-msgstr ""
-
-#. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
-#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
-msgid "TMC DRIVER SHORTED"
-msgstr ""
-
-#. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
-#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
-msgid "TMC OVERHEAT ERROR"
-msgstr ""
-
-#. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
-#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
-msgid "TMC UNDERVOLTAGE ERR"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4717
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1722
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
-msgid "Testing filament"
-msgstr ""
-
-#. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
-msgid ""
-"The Idler cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
-msgid ""
-"The MMU unit reports its FW version incompatible with the printer's "
-"firmware. Make sure the MMU firmware is up to date."
-msgstr ""
-
-#. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
-msgid ""
-"The Selector cannot home properly. Check for anything blocking its movement."
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3929
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
-#: ../../Firmware/ultralcd.cpp:1293
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2378
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2379
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5483
-msgid "Tune"
-msgstr ""
-
-#. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
-msgid "UNLOAD MANUALLY"
-msgstr ""
-
-#. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
-msgid ""
-"Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
-"is free. Check FINDA connection."
-msgstr ""
-
-#. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
-msgid "Unload"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
-#: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5167
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_FINDA c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:11
-#: ../../Firmware/mmu2_progress_converter.cpp:37
-msgid "Unloading to FINDA"
-msgstr ""
-
-#. MSG_PROGRESS_UNLOAD_PULLEY c=20
-#: ../../Firmware/mmu2_progress_converter.cpp:12
-#: ../../Firmware/mmu2_progress_converter.cpp:38
-msgid "Unloading to pulley"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6247
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1725
-msgid "Voltages"
-msgstr ""
-
-#. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
-msgid "WARNING TMC TOO HOT"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4112
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2872
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2904
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
-#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4614
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1493
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3571
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
-#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
-#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4837
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4161
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5583
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1714
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3345
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3342
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3323
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3326
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3305
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3311
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
-#: ../../Firmware/ultralcd.cpp:3336
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3314
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3339
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2485
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4162
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
-#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
-#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4163
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2163
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1810
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1814
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1681
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
-msgid "unknown state"
-msgstr ""
-
-#. MSG_BTN_MORE c=8
-#. @todo convert to PROGMEM_N1
-#: ../../Firmware/mmu2/errors_list.h:301
-#: ../../Firmware/mmu2_error_converter.cpp:167
-msgid "⏬"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
-#: ../../Firmware/ultralcd.cpp:6071
-msgid "🔃Refresh"
-msgstr ""