josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add ubs_timer.start to PRUSA uvlo 

Cleanup format
This commit is contained in:
3d-gussner 2024-03-13 14:57:58 +01:00
parent 15ea2784c3
commit 9e52b78285
1 changed files with 30 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

74
Firmware/Marlin_main.cpp
View File

@ -4171,62 +4171,52 @@ void process_commands()
if (farm_prusa_code_seen()) {}
else if(code_seen_P(PSTR("FANPINTST"))) {
gcode_PRUSA_BadRAMBoFanTest();
}
else if (code_seen_P(PSTR("FAN"))) { // PRUSA FAN
} else if (code_seen_P(PSTR("FAN"))) { // PRUSA FAN
printf_P(_N("E0:%d RPM\nPRN0:%d RPM\n"), 60*fan_speed[0], 60*fan_speed[1]);
}
else if (code_seen_P(PSTR("uvlo"))) // PRUSA uvlo
{
if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_PRINT_TYPE) == PowerPanic::PRINT_TYPE_SD)
{
} else if (code_seen_P(PSTR("uvlo"))) { // PRUSA uvlo
if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_PRINT_TYPE) == PowerPanic::PRINT_TYPE_SD) {
// M24 - Start SD print
enquecommand_P(MSG_M24);
// Print is recovered, clear the recovery flag
eeprom_update_byte_notify((uint8_t*)EEPROM_UVLO, PowerPanic::NO_PENDING_RECOVERY);
}
else if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_PRINT_TYPE) == PowerPanic::PRINT_TYPE_HOST)
{
} else if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_PRINT_TYPE) == PowerPanic::PRINT_TYPE_HOST) {
// For Host prints we need to start the timer so that the pause has any effect
// this will allow g-codes to be processed while in the paused state
// For SD prints, M24 starts the timer
print_job_timer.start();
usb_timer.start();
// Park the extruder to the side and don't resume the print
// we must assume that the host as not fully booted up at this point
lcd_pause_print();
}
}
else if (code_seen_P(PSTR("MMURES"))) // PRUSA MMURES
{
MMU2::mmu2.Reset(MMU2::MMU2::Software);
}
else if (code_seen_P(PSTR("RESET"))) { // PRUSA RESET
} else if (code_seen_P(PSTR("MMURES"))) { // PRUSA MMURES
MMU2::mmu2.Reset(MMU2::MMU2::Software);
} else if (code_seen_P(PSTR("RESET"))) { // PRUSA RESET
#if defined(XFLASH) && defined(BOOTAPP)
boot_app_magic = 0;
#endif //defined(XFLASH) && defined(BOOTAPP)
softReset();
}
else if (code_seen_P(PSTR("SN"))) { // PRUSA SN
char SN[20];
eeprom_read_block(SN, (uint8_t*)EEPROM_PRUSA_SN, 20);
if (SN[19])
puts_P(PSTR("SN invalid"));
else
puts(SN);
}
else if(code_seen_P(PSTR("Fir"))){ // PRUSA Fir
} else if (code_seen_P(PSTR("SN"))) { // PRUSA SN
char SN[20];
eeprom_read_block(SN, (uint8_t*)EEPROM_PRUSA_SN, 20);
if (SN[19])
puts_P(PSTR("SN invalid"));
else
puts(SN);
} else if(code_seen_P(PSTR("Fir"))){ // PRUSA Fir
SERIAL_PROTOCOLLNPGM(FW_VERSION_FULL);
SERIAL_PROTOCOLLNPGM(FW_VERSION_FULL);
} else if(code_seen_P(PSTR("Rev"))){ // PRUSA Rev
SERIAL_PROTOCOLLNPGM(FILAMENT_SIZE "-" ELECTRONICS "-" NOZZLE_TYPE );
} else if(code_seen_P(PSTR("Lang"))) { // PRUSA Lang
lang_reset();
lang_reset();
} else if(code_seen_P(PSTR("Lz"))) { // PRUSA Lz
} else if(code_seen_P(PSTR("Lz"))) { // PRUSA Lz
eeprom_update_word_notify(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)),0);
} else if(code_seen_P(PSTR("FR"))) { // PRUSA FR
@ -4244,21 +4234,17 @@ void process_commands()
}
}
} else if (code_seen_P(PSTR("nozzle"))) { // PRUSA nozzle
uint16_t nDiameter;
if(code_seen('D'))
{
nDiameter=(uint16_t)(code_value()*1000.0+0.5); // [,um]
nozzle_diameter_check(nDiameter);
}
else if(code_seen_P(PSTR("set")) && farm_mode)
{
strchr_pointer++; // skip 1st char (~ 's')
strchr_pointer++; // skip 2nd char (~ 'e')
nDiameter=(uint16_t)(code_value()*1000.0+0.5); // [,um]
eeprom_update_byte_notify((uint8_t*)EEPROM_NOZZLE_DIAMETER,(uint8_t)ClNozzleDiameter::_Diameter_Undef); // for correct synchronization after farm-mode exiting
eeprom_update_word_notify((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,nDiameter);
}
else SERIAL_PROTOCOLLN((float)eeprom_read_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM)/1000.0);
uint16_t nDiameter;
if(code_seen('D')) {
nDiameter=(uint16_t)(code_value()*1000.0+0.5); // [,um]
nozzle_diameter_check(nDiameter);
} else if(code_seen_P(PSTR("set")) && farm_mode) {
strchr_pointer++; // skip 1st char (~ 's')
strchr_pointer++; // skip 2nd char (~ 'e')
nDiameter=(uint16_t)(code_value()*1000.0+0.5); // [,um]
eeprom_update_byte_notify((uint8_t*)EEPROM_NOZZLE_DIAMETER,(uint8_t)ClNozzleDiameter::_Diameter_Undef); // for correct synchronization after farm-mode exiting
eeprom_update_word_notify((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,nDiameter);
} else SERIAL_PROTOCOLLN((float)eeprom_read_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM)/1000.0);
}
}
else if(*CMDBUFFER_CURRENT_STRING == 'G')