josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Host keep alive messages

This commit is contained in:
PavelSindler 2017-08-17 19:07:38 +02:00
parent 2b657ba786
commit 9e73c96223
6 changed files with 66 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Configuration_adv.h
View File

@ -261,7 +261,7 @@
#define SD_SORT_ALPHA 1
#define SD_SORT_NONE 2
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256).
#define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256).
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.

23
Firmware/Marlin.h
View File

@ -318,8 +318,6 @@ extern void digipot_i2c_set_current( int channel, float current );
extern void digipot_i2c_init();
#endif
#endif
//Long pause
extern int saved_feedmultiply;
extern float HotendTempBckp;
@ -352,8 +350,29 @@ float d_ReadData();
void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_points_num, float shift_x, float shift_y);
#endif
float temp_comp_interpolation(float temperature);
void temp_compensation_apply();
void temp_compensation_start();
void wait_for_heater(long codenum);
void serialecho_temperatures();
#ifdef HOST_KEEPALIVE_FEATURE
// States for managing Marlin and host communication
// Marlin sends messages if blocked or busy
enum MarlinBusyState {
NOT_BUSY, // Not in a handler
IN_HANDLER, // Processing a GCode
IN_PROCESS, // Known to be blocking command input (as in G29)
PAUSED_FOR_USER, // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)
};
#define KEEPALIVE_STATE(n) do { busy_state = n;} while (0)
extern void host_keepalive();
extern MarlinBusyState busy_state;
#endif //HOST_KEEPALIVE_FEATURE
#endif //ifndef marlin.h

52
Firmware/Marlin_main.cpp
View File

@ -372,20 +372,10 @@ int fanSpeed=0;
bool cancel_heatup = false ;
#ifdef HOST_KEEPALIVE_FEATURE
// States for managing Marlin and host communication
// Marlin sends messages if blocked or busy
enum MarlinBusyState {
NOT_BUSY, // Not in a handler
IN_HANDLER, // Processing a GCode
IN_PROCESS, // Known to be blocking command input (as in G29)
PAUSED_FOR_USER, // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)
};
static MarlinBusyState busy_state = NOT_BUSY;
MarlinBusyState busy_state = NOT_BUSY;
static long prev_busy_signal_ms = -1;
uint8_t host_keepalive_interval = HOST_KEEPALIVE_INTERVAL;
#define KEEPALIVE_STATE(n) do { busy_state = n; } while (0)
#else
#define host_keepalive();
#define KEEPALIVE_STATE(n);
@ -1099,6 +1089,7 @@ void setup()
world2machine_reset();
lcd_init();
KEEPALIVE_STATE(PAUSED_FOR_USER);
if (!READ(BTN_ENC))
{
_delay_ms(1000);
@ -1120,7 +1111,7 @@ void setup()
_delay_ms(2000);
char level = reset_menu();
factory_reset(level, false);
@ -1266,6 +1257,7 @@ void setup()
// Store the currently running firmware into an eeprom,
// so the next time the firmware gets updated, it will know from which version it has been updated.
update_current_firmware_version_to_eeprom();
KEEPALIVE_STATE(NOT_BUSY);
}
void trace();
@ -1351,7 +1343,7 @@ void host_keepalive() {
long ms = millis();
if (host_keepalive_interval && busy_state != NOT_BUSY) {
if (ms - prev_busy_signal_ms < 1000UL * host_keepalive_interval) return;
switch (busy_state) {
switch (busy_state) {
case IN_HANDLER:
case IN_PROCESS:
SERIAL_ECHO_START;
@ -1432,7 +1424,6 @@ void loop()
manage_heater();
isPrintPaused ? manage_inactivity(true) : manage_inactivity(false);
checkHitEndstops();
host_keepalive();
lcd_update();
}
@ -2460,7 +2451,7 @@ void process_commands()
prepare_arc_move(false);
}
break;
case 4: // G4 dwell
case 4: // G4 dwell
codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
@ -2493,10 +2484,7 @@ void process_commands()
#endif //FWRETRACT
case 28: //G28 Home all Axis one at a time
homing_flag = true;
KEEPALIVE_STATE(IN_HANDLER);
#ifdef ENABLE_AUTO_BED_LEVELING
#ifdef ENABLE_AUTO_BED_LEVELING
plan_bed_level_matrix.set_to_identity(); //Reset the plane ("erase" all leveling data)
#endif //ENABLE_AUTO_BED_LEVELING
@ -2943,6 +2931,7 @@ void process_commands()
enquecommand_front_P((PSTR("G28 W0")));
break;
}
KEEPALIVE_STATE(NOT_BUSY); //no need to print busy messages as we print current temperatures periodicaly
SERIAL_ECHOLNPGM("PINDA probe calibration start");
custom_message = true;
custom_message_type = 4;
@ -3540,9 +3529,9 @@ void process_commands()
while (*src == ' ') ++src;
if (!hasP && !hasS && *src != '\0') {
lcd_setstatus(src);
} else {
LCD_MESSAGERPGM(MSG_USERWAIT);
}
} else {
LCD_MESSAGERPGM(MSG_USERWAIT);
}
lcd_ignore_click(); //call lcd_ignore_click aslo for else ???
st_synchronize();
@ -3754,7 +3743,6 @@ void process_commands()
{
// Only Z calibration?
bool onlyZ = code_seen('Z');
if (!onlyZ) {
setTargetBed(0);
setTargetHotend(0, 0);
@ -3777,7 +3765,9 @@ void process_commands()
memset(axis_known_position, 0, sizeof(axis_known_position));
// Let the user move the Z axes up to the end stoppers.
KEEPALIVE_STATE(PAUSED_FOR_USER);
if (lcd_calibrate_z_end_stop_manual( onlyZ )) {
KEEPALIVE_STATE(IN_HANDLER);
refresh_cmd_timeout();
if (((degHotend(0) > MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) && (!onlyZ)) {
lcd_wait_for_cool_down();
@ -3857,6 +3847,7 @@ void process_commands()
}
} else {
// Timeouted.
KEEPALIVE_STATE(IN_HANDLER);
}
lcd_update_enable(true);
break;
@ -3887,8 +3878,10 @@ void process_commands()
case 47:
// M47: Prusa3D: Show end stops dialog on the display.
KEEPALIVE_STATE(PAUSED_FOR_USER);
lcd_diag_show_end_stops();
break;
KEEPALIVE_STATE(IN_HANDLER);
break;
#if 0
case 48: // M48: scan the bed induction sensor points, print the sensor trigger coordinates to the serial line for visualization on the PC.
@ -5070,8 +5063,7 @@ Sigma_Exit:
if (code_seen('S')) temp=code_value();
if (code_seen('C')) c=code_value();
KEEPALIVE_STATE(NOT_BUSY);
PID_autotune(temp, e, c);
PID_autotune(temp, e, c);
}
break;
case 400: // M400 finish all moves
@ -5433,7 +5425,9 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
lcd_loading_filament();
while ((lcd_change_fil_state == 0)||(lcd_change_fil_state != 1)){
lcd_change_fil_state = 0;
KEEPALIVE_STATE(PAUSED_FOR_USER);
lcd_alright();
KEEPALIVE_STATE(IN_HANDLER);
switch(lcd_change_fil_state){
// Filament failed to load so load it again
@ -6095,7 +6089,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
static int killCount = 0; // make the inactivity button a bit less responsive
const int KILL_DELAY = 10000;
#endif
if(buflen < (BUFSIZE-1)){
get_command();
}
@ -6371,7 +6365,7 @@ void calculate_volumetric_multipliers() {
void delay_keep_alive(unsigned int ms)
{
for (;;) {
for (;;) {
manage_heater();
// Manage inactivity, but don't disable steppers on timeout.
manage_inactivity(true);

2
Firmware/cardreader.cpp
View File

@ -705,7 +705,7 @@ void CardReader::getfilename_sorted(const uint16_t nr) {
* - Most RAM: Buffer the directory and return filenames from RAM
*/
void CardReader::presort() {
uint8_t sdSort = eeprom_read_byte((uint8_t*)EEPROM_SD_SORT);
if (sdSort == SD_SORT_NONE) return; //sd sort is turned off

15
Firmware/temperature.cpp
View File

@ -220,7 +220,7 @@ unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
pid_cycle = 0;
return;
}
SERIAL_ECHOLN("PID Autotune start");
disable_heater(); // switch off all heaters.
@ -336,13 +336,13 @@ unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
p=soft_pwm_bed;
SERIAL_PROTOCOLPGM("ok B:");
}else{
p=soft_pwm[extruder];
SERIAL_PROTOCOLPGM("ok T:");
p=soft_pwm[extruder];
SERIAL_PROTOCOLPGM("ok T:");
}
SERIAL_PROTOCOL(input);
SERIAL_PROTOCOLPGM(" @:");
SERIAL_PROTOCOLLN(p);
SERIAL_PROTOCOL(input);
SERIAL_PROTOCOLPGM(" @:");
SERIAL_PROTOCOLLN(p);
temp_millis = millis();
}
@ -686,6 +686,7 @@ void manage_heater()
volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]=0.01;
}
#endif
host_keepalive();
}
#define PGM_RD_W(x) (short)pgm_read_word(&x)

15
Firmware/ultralcd.cpp
View File

@ -1283,13 +1283,14 @@ void lcd_menu_statistics()
lcd.print(itostr3(_days));
KEEPALIVE_STATE(PAUSED_FOR_USER);
while (!lcd_clicked())
{
manage_heater();
manage_inactivity(true);
delay(100);
}
KEEPALIVE_STATE(NOT_BUSY);
lcd_quick_feedback();
lcd_return_to_status();
@ -1367,6 +1368,7 @@ void lcd_service_mode_show_result() {
} else lcd_print_at_PGM(11, i + 1, PSTR("N/A"));
}
delay_keep_alive(500);
KEEPALIVE_STATE(PAUSED_FOR_USER);
while (!lcd_clicked()) {
delay_keep_alive(100);
}
@ -1393,6 +1395,7 @@ void lcd_service_mode_show_result() {
while (!lcd_clicked()) {
delay_keep_alive(100);
}
KEEPALIVE_STATE(NOT_BUSY);
delay_keep_alive(500);
lcd_set_custom_characters_arrows();
lcd_return_to_status();
@ -1865,6 +1868,7 @@ void lcd_show_fullscreen_message_and_wait_P(const char *msg)
const char *msg_next = lcd_display_message_fullscreen_P(msg);
bool multi_screen = msg_next != NULL;
KEEPALIVE_STATE(PAUSED_FOR_USER);
// Until confirmed by a button click.
for (;;) {
// Wait for 5 seconds before displaying the next text.
@ -1874,6 +1878,7 @@ void lcd_show_fullscreen_message_and_wait_P(const char *msg)
while (lcd_clicked()) ;
delay(10);
while (lcd_clicked()) ;
KEEPALIVE_STATE(IN_HANDLER);
return;
}
}
@ -1887,6 +1892,7 @@ void lcd_show_fullscreen_message_and_wait_P(const char *msg)
void lcd_wait_for_click()
{
KEEPALIVE_STATE(PAUSED_FOR_USER);
for (;;) {
manage_heater();
manage_inactivity(true);
@ -1894,6 +1900,7 @@ void lcd_wait_for_click()
while (lcd_clicked()) ;
delay(10);
while (lcd_clicked()) ;
KEEPALIVE_STATE(IN_HANDLER);
return;
}
}
@ -1901,7 +1908,6 @@ void lcd_wait_for_click()
int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes)
{
lcd_display_message_fullscreen_P(msg);
if (default_yes) {
@ -1923,6 +1929,7 @@ int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow
// Wait for user confirmation or a timeout.
unsigned long previous_millis_cmd = millis();
int8_t enc_dif = encoderDiff;
KEEPALIVE_STATE(PAUSED_FOR_USER);
for (;;) {
if (allow_timeouting && millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
return -1;
@ -1948,6 +1955,7 @@ int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow
while (lcd_clicked());
delay(10);
while (lcd_clicked());
KEEPALIVE_STATE(IN_HANDLER);
return yes;
}
}
@ -4800,6 +4808,7 @@ static bool lcd_selftest_fan_dialog(int _fan)
lcd.setCursor(1, 3); lcd_printPGM(MSG_SELFTEST_FAN_NO);
int8_t enc_dif = 0;
KEEPALIVE_STATE(PAUSED_FOR_USER);
do
{
switch (_fan)
@ -4840,7 +4849,7 @@ static bool lcd_selftest_fan_dialog(int _fan)
delay(100);
} while (!lcd_clicked());
KEEPALIVE_STATE(IN_HANDLER);
SET_OUTPUT(EXTRUDER_0_AUTO_FAN_PIN);
WRITE(EXTRUDER_0_AUTO_FAN_PIN, 0);
SET_OUTPUT(FAN_PIN);