josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fixed Big RAMBo support and added configuration for it.

This commit is contained in:
michalprusa 2016-03-15 12:08:16 +01:00
parent 533c3e4e1a
commit a271bf3d56
10 changed files with 8116 additions and 257 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

478
Firmware/pins.h
View File

@ -20,282 +20,302 @@
#define LARGE_FLASH true #define LARGE_FLASH true
/***************************************************************** /*****************************************************************
* Rambo Pin Assignments 1.3 * RamboBig Pin Assignments
******************************************************************/ ******************************************************************/
#if MOTHERBOARD == 302 #if MOTHERBOARD == 301
#define MINI-RAMBO
#define ELECTRONICS "RAMBoBig"
#define KNOWN_BOARD
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif #endif
#if MOTHERBOARD == 301 || MOTHERBOARD == 302
#define KNOWN_BOARD
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif
#define FR_SENS 21
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define TEMP_BED_PIN 2
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#define TEMP_2_PIN -1
#define FR_SENS 21 // The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define TEMP_BED_PIN 2
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#define TEMP_2_PIN -1
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 53 #define SDSS 53
#ifndef SDSUPPORT #ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 52 #define SCK_PIN 52
#define MISO_PIN 50 #define MISO_PIN 50
#define MOSI_PIN 51 #define MOSI_PIN 51
#endif #endif
#define BEEPER 84 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define LED_PIN 13
#define BTN_EN1 72 #ifdef THREEMM_PRINTER
#define BTN_EN2 14 #define FAN_PIN 8
#define BTN_ENC 9 #else
#define FAN_PIN 6
#endif
#define SDCARDDETECT 15 #define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define SDPOWER -1
#define LCD_PINS_RS 82 #ifdef BARICUDA
#define LCD_PINS_ENABLE 18 #define HEATER_2_PIN 6
#define LCD_PINS_D4 19 #else
#define LCD_PINS_D5 70 #define HEATER_2_PIN -1
#define LCD_PINS_D6 85 #endif
#define LCD_PINS_D7 71
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define HEATER_0_PIN 9
#define HEATER_BED_PIN 3
#define PS_ON_PIN 4
#define SDSS 53
#define BEEPER 79
#define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71
#define LCD_PINS_D4 72
#define LCD_PINS_D5 73
#define LCD_PINS_D6 74
#define LCD_PINS_D7 75
#define BTN_EN1 76
#define BTN_EN2 77
#define BTN_ENC 78
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT 81
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define LED_PIN 13
#ifdef THREEMM_PRINTER
#define FAN_PIN 8
#else
#define FAN_PIN 6
#endif
#define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define SDPOWER -1
#ifdef BARICUDA
#define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
#endif
#ifdef MINI-RAMBO
#define ELECTRONICS "RAMBo13a"
#define HEATER_0_PIN 3
#define HEATER_BED_PIN 4
#define FAN_1_PIN -1 //6
#define PS_ON_PIN 71
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44
#else //RAMBo
#define ELECTRONICS "RAMBoBig"
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define HEATER_0_PIN 9
#define HEATER_BED_PIN 3
#define PS_ON_PIN 4
#define SDSS 53
#ifdef ULTRA_LCD
#define KILL_PIN 80
#ifdef NEWPANEL
//arduino pin which triggers an piezzo beeper
#define BEEPER 84 // Beeper on AUX-4
#define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
//buttons are directly attached using AUX-2
#define BTN_EN1 76
#define BTN_EN2 77
#define BTN_ENC 78 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT 81 // Ramps does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define BEEPER 84 //No Beeper added
//buttons are attached to a shift register
// Not wired this yet
// #define SHIFT_CLK 38
// #define SHIFT_LD 42
// #define SHIFT_OUT 40
// #define SHIFT_EN 17
#define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif
#endif //ULTRA_LCD
#endif //RAMBo/MiniRambo option
#endif #endif
/*****************************************************************
* Rambo Pin Assignments 1.3
******************************************************************/
#if MOTHERBOARD == 302
#define ELECTRONICS "RAMBo13a"
#define KNOWN_BOARD
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif
#define FR_SENS 21
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define TEMP_BED_PIN 2
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#define TEMP_2_PIN -1
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 53
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 52
#define MISO_PIN 50
#define MOSI_PIN 51
#endif
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define LED_PIN 13
#ifdef THREEMM_PRINTER
#define FAN_PIN 8
#else
#define FAN_PIN 6
#endif
#define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define SDPOWER -1
#ifdef BARICUDA
#define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
#endif
#define BEEPER 84
#define BTN_EN1 72
#define BTN_EN2 14
#define BTN_ENC 9
#define SDCARDDETECT 15
#define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
#define HEATER_0_PIN 3
#define HEATER_BED_PIN 4
#define FAN_1_PIN -1 //6
#define PS_ON_PIN 71
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44
#endif
/***************************************************************** /*****************************************************************
* Rambo mini Pin Assignments 1.0 * Rambo mini Pin Assignments 1.0
******************************************************************/ ******************************************************************/
#if MOTHERBOARD == 102 #if MOTHERBOARD == 102
#define ELECTRONICS "RAMBo10a" #define ELECTRONICS "RAMBo10a"
#define KNOWN_BOARD
#ifndef __AVR_ATmega2560__ #define KNOWN_BOARD
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif #endif
#define FR_SENS 21 #define FR_SENS 21
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define TEMP_BED_PIN 2
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#define TEMP_2_PIN -1
#define LARGE_FLASH true // The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define TEMP_BED_PIN 2
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#define TEMP_2_PIN -1
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 53 #define SDSS 53
#ifndef SDSUPPORT #ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 52 #define SCK_PIN 52
#define MISO_PIN 50 #define MISO_PIN 50
#define MOSI_PIN 51 #define MOSI_PIN 51
#endif #endif
#define BEEPER 78 #define BEEPER 78
#define BTN_EN1 80
#define BTN_EN2 73
#define BTN_ENC 21
#define SDCARDDETECT 72
#define LCD_PINS_RS 38
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 14
#define LCD_PINS_D5 15
#define LCD_PINS_D6 32
#define LCD_PINS_D7 31
#define BTN_EN1 80 #define E0_STEP_PIN 34
#define BTN_EN2 73 #define E0_DIR_PIN 43
#define BTN_ENC 21 #define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define LED_PIN 13
#define SDCARDDETECT 72 #ifdef THREEMM_PRINTER
#define FAN_PIN 8
#else
#define FAN_PIN 6
#endif
#define LCD_PINS_RS 38 #define KILL_PIN -1 //80 with Smart Controller LCD
#define LCD_PINS_ENABLE 5 #define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define LCD_PINS_D4 14 #define SDPOWER -1
#define LCD_PINS_D5 15
#define LCD_PINS_D6 32
#define LCD_PINS_D7 31
#ifdef BARICUDA
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define LED_PIN 13
#ifdef THREEMM_PRINTER
#define FAN_PIN 8
#else
#define FAN_PIN 6
#endif
#define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define SDPOWER -1
#ifdef BARICUDA
#define HEATER_2_PIN 6 #define HEATER_2_PIN 6
#else #else
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#endif #endif
#define HEATER_0_PIN 3 #define HEATER_0_PIN 3
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define FAN_1_PIN -1 //6 #define FAN_1_PIN -1 //6
#define PS_ON_PIN 71 #define PS_ON_PIN 71
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44
#endif #endif

23
Firmware/stepper.cpp
View File

@ -78,6 +78,12 @@ bool abort_on_endstop_hit = false;
int motor_current_setting_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD; int motor_current_setting_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
#endif #endif
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT;
const uint8_t digipot_motor_current_loud[] = DIGIPOT_MOTOR_CURRENT_LOUD;
const uint8_t digipot_motor_current_silent[] = DIGIPOT_MOTOR_CURRENT;
#endif
static bool old_x_min_endstop=false; static bool old_x_min_endstop=false;
static bool old_x_max_endstop=false; static bool old_x_max_endstop=false;
static bool old_y_min_endstop=false; static bool old_y_min_endstop=false;
@ -173,6 +179,7 @@ asm volatile ( \
#define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= (1<<OCIE1A) #define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= (1<<OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 &= ~(1<<OCIE1A) #define DISABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 &= ~(1<<OCIE1A)
void digipot_current(uint8_t driver, int current);
void checkHitEndstops() void checkHitEndstops()
{ {
@ -1265,15 +1272,25 @@ void digipot_init() //Initialize Digipot Motor Current
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
if(SilentMode == 0){ if(SilentMode == 0){
const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT_LOUD; for(int i=0;i<=4;i++){
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
digipot_motor_current[i] = digipot_motor_current_loud[i];
}
}else{ }else{
const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT; for(int i=0;i<=4;i++){
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
digipot_motor_current[i] = digipot_motor_current_silent[i];
}
} }
SPI.begin(); SPI.begin();
pinMode(DIGIPOTSS_PIN, OUTPUT); pinMode(DIGIPOTSS_PIN, OUTPUT);
for(int i=0;i<=4;i++) for(int i=0;i<=4;i++){
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]); //digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
digipot_current(i,digipot_motor_current[i]); digipot_current(i,digipot_motor_current[i]);
}
#endif #endif
#ifdef MOTOR_CURRENT_PWM_XY_PIN #ifdef MOTOR_CURRENT_PWM_XY_PIN
pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT); pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);

230
Firmware/variants/3mm-RAMBoBig-PrusaNmk2.h Executable file
View File

@ -0,0 +1,230 @@
#ifndef CONFIGURATION_PRUSA_H
#define CONFIGURATION_PRUSA_H
/*------------------------------------
GENERAL SETTINGS
*------------------------------------*/
// Printer revision
#define FILAMENT_SIZE "3mm"
#define NOZZLE_TYPE "PrusaNmk2"
#define THREEMM_PRINTER
// Printer name
#define CUSTOM_MENDEL_NAME "Prusa i3"
// Electronics
#define MOTHERBOARD BOARD_RAMBO
/*------------------------------------
AXIS SETTINGS
*------------------------------------*/
// Steps per unit {X,Y,Z,E}
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/0.8,350*1.5}
// Endstop inverting
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
// Home position
#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 0.25
// Travel limits after homing
#define X_MAX_POS 214
#define X_MIN_POS 0
#define Y_MAX_POS 198
#define Y_MIN_POS 0
#define Z_MAX_POS 201
#define Z_MIN_POS 0.23
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {3000, 3000, 240, 0} // set the homing speeds (mm/min)
#define DEFAULT_MAX_FEEDRATE {500, 500, 3, 25} // (mm/sec)
#define DEFAULT_MAX_ACCELERATION {9000,9000,30,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
#define MANUAL_FEEDRATE {3000, 3000, 240, 60} // set the speeds for manual moves (mm/min)
/*------------------------------------
EXTRUDER SETTINGS
*------------------------------------*/
// Mintemps
#define HEATER_0_MINTEMP 15
#define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5
#define BED_MINTEMP 15
// Maxtemps
#define HEATER_0_MAXTEMP 315
#define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275
#define BED_MAXTEMP 150
// Define PID constants for extruder
#define DEFAULT_Kp 12.7
#define DEFAULT_Ki 1.09
#define DEFAULT_Kd 37.4
// Extrude mintemp
#define EXTRUDE_MINTEMP 190
// Extruder cooling fans
#define EXTRUDER_0_AUTO_FAN_PIN 6
#define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
/*------------------------------------
LOAD/UNLOAD FILAMENT SETTINGS
*------------------------------------*/
// Load filament commands
#define LOAD_FILAMENT_0 "M83"
#define LOAD_FILAMENT_1 "G1 E65 F400"
#define LOAD_FILAMENT_2 "G1 E40 F100"
// Unload filament commands
#define UNLOAD_FILAMENT_0 "M83"
#define UNLOAD_FILAMENT_1 "G1 E-80 F400"
/*------------------------------------
CHANGE FILAMENT SETTINGS
*------------------------------------*/
// Filament change configuration
#define FILAMENTCHANGEENABLE
#ifdef FILAMENTCHANGEENABLE
#define FILAMENTCHANGE_XPOS 190
#define FILAMENTCHANGE_YPOS 0
#define FILAMENTCHANGE_ZADD 2
#define FILAMENTCHANGE_FIRSTRETRACT -2
#define FILAMENTCHANGE_FINALRETRACT -80
#define FILAMENTCHANGE_FIRSTFEED 70
#define FILAMENTCHANGE_FINALFEED 50
#define FILAMENTCHANGE_RECFEED 5
#define FILAMENTCHANGE_XYFEED 70
#define FILAMENTCHANGE_EFEED 20
#define FILAMENTCHANGE_RFEED 400
#define FILAMENTCHANGE_EXFEED 2
#define FILAMENTCHANGE_ZFEED 300
#endif
/*------------------------------------
ADDITIONAL FEATURES SETTINGS
*------------------------------------*/
// Define Prusa filament runout sensor
//#define FILAMENT_RUNOUT_SUPPORT
#ifdef FILAMENT_RUNOUT_SUPPORT
#define FILAMENT_RUNOUT_SENSOR 1
#endif
/*------------------------------------
MOTOR CURRENT SETTINGS
*------------------------------------*/
// Motor Current setting for BIG RAMBo
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
#define DIGIPOT_MOTOR_CURRENT_LOUD {135,135,135,135,135}
// Motor Current settings for RAMBo mini PWM value = MotorCurrentSetting * 255 / range
#if MOTHERBOARD == 102 || MOTHERBOARD == 302
#define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {270, 450, 850} // {XY,Z,E}
#define DEFAULT_PWM_MOTOR_CURRENT_LOUD {540, 450, 500} // {XY,Z,E}
#endif
/*------------------------------------
PREHEAT SETTINGS
*------------------------------------*/
#define PLA_PREHEAT_HOTEND_TEMP 220
#define PLA_PREHEAT_HPB_TEMP 50
#define PLA_PREHEAT_FAN_SPEED 255
#define ABS_PREHEAT_HOTEND_TEMP 285
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 240
#define PET_PREHEAT_HPB_TEMP 90
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 250
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS
*------------------------------------*/
//
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
//
//// Temperature sensor settings:
// -2 is thermocouple with MAX6675 (only for sensor 0)
// -1 is thermocouple with AD595
// 0 is not used
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
// 3 is Mendel-parts thermistor (4.7k pullup)
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
// 20 is the PT100 circuit found in the Ultimainboard V2.x
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
//
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
// (but gives greater accuracy and more stable PID)
// 51 is 100k thermistor - EPCOS (1k pullup)
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
//
// 1047 is Pt1000 with 4k7 pullup
// 1010 is Pt1000 with 1k pullup (non standard)
// 147 is Pt100 with 4k7 pullup
// 110 is Pt100 with 1k pullup (non standard)
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_BED 1
#endif //__CONFIGURATION_PRUSA_H

6
hex_files/1_75mm-RAMBo10a-E3Dv6full.hex
View File

@ -1167,11 +1167,11 @@
:1048E000543A002569206D696E2C20256920736576 :1048E000543A002569206D696E2C20256920736576
:1048F0006300256920686F757273202569206D69D2 :1048F0006300256920686F757273202569206D69D2
:104900006E75746573004D313130004D3239004D94 :104900006E75746573004D313130004D3239004D94
:104910006172202039203230313600436F6D70696A :104910006172203135203230313600436F6D70695D
:104920006C65643A2000286E6F6E652C20646566A5 :104920006C65643A2000286E6F6E652C20646566A5
:1049300061756C7420636F6E66696729004D6172E2 :1049300061756C7420636F6E66696729004D6172E2
:1049400020203920323031362031363A34313A3372 :1049400020313520323031362031313A34303A3569
:10495000340073746172740022002200FFFFFF00B4 :10495000300073746172740022002200FFFFFF00B8
:1049600000A0400000A040000000400000564300AE :1049600000A0400000A040000000400000564300AE
:104970000046431FC5484300000000000000001F20 :104970000046431FC5484300000000000000001F20
:10498000856B3E000056430000464300004943004B :10498000856B3E000056430000464300004943004B

6
hex_files/1_75mm-RAMBo10a-E3Dv6lite.hex
View File

@ -1167,11 +1167,11 @@
:1048E000543A002569206D696E2C20256920736576 :1048E000543A002569206D696E2C20256920736576
:1048F0006300256920686F757273202569206D69D2 :1048F0006300256920686F757273202569206D69D2
:104900006E75746573004D313130004D3239004D94 :104900006E75746573004D313130004D3239004D94
:104910006172202039203230313600436F6D70696A :104910006172203135203230313600436F6D70695D
:104920006C65643A2000286E6F6E652C20646566A5 :104920006C65643A2000286E6F6E652C20646566A5
:1049300061756C7420636F6E66696729004D6172E2 :1049300061756C7420636F6E66696729004D6172E2
:1049400020203920323031362031363A34313A3570 :1049400020313520323031362031313A34313A306D
:10495000320073746172740022002200FFFFFF00B6 :10495000370073746172740022002200FFFFFF00B1
:1049600000A0400000A040000000400000564300AE :1049600000A0400000A040000000400000564300AE
:104970000046431FC5484300000000000000001F20 :104970000046431FC5484300000000000000001F20
:10498000856B3E000056430000464300004943004B :10498000856B3E000056430000464300004943004B

6
hex_files/1_75mm-RAMBo13a-E3Dv6full.hex
View File

@ -1167,11 +1167,11 @@
:1048E000543A002569206D696E2C20256920736576 :1048E000543A002569206D696E2C20256920736576
:1048F0006300256920686F757273202569206D69D2 :1048F0006300256920686F757273202569206D69D2
:104900006E75746573004D313130004D3239004D94 :104900006E75746573004D313130004D3239004D94
:104910006172202039203230313600436F6D70696A :104910006172203135203230313600436F6D70695D
:104920006C65643A2000286E6F6E652C20646566A5 :104920006C65643A2000286E6F6E652C20646566A5
:1049300061756C7420636F6E66696729004D6172E2 :1049300061756C7420636F6E66696729004D6172E2
:1049400020203920323031362031363A34323A3173 :1049400020313520323031362031313A34313A326B
:10495000300073746172740022002200FFFFFF00B8 :10495000340073746172740022002200FFFFFF00B4
:1049600000A0400000A040000000400000564300AE :1049600000A0400000A040000000400000564300AE
:104970000046431FC5484300000000000000001F20 :104970000046431FC5484300000000000000001F20
:10498000856B3E000056430000464300004943004B :10498000856B3E000056430000464300004943004B

6
hex_files/1_75mm-RAMBo13a-E3Dv6lite.hex
View File

@ -1167,11 +1167,11 @@
:1048E000543A002569206D696E2C20256920736576 :1048E000543A002569206D696E2C20256920736576
:1048F0006300256920686F757273202569206D69D2 :1048F0006300256920686F757273202569206D69D2
:104900006E75746573004D313130004D3239004D94 :104900006E75746573004D313130004D3239004D94
:104910006172202039203230313600436F6D70696A :104910006172203135203230313600436F6D70695D
:104920006C65643A2000286E6F6E652C20646566A5 :104920006C65643A2000286E6F6E652C20646566A5
:1049300061756C7420636F6E66696729004D6172E2 :1049300061756C7420636F6E66696729004D6172E2
:1049400020203920323031362031363A34323A3272 :1049400020313520323031362031313A34313A3469
:10495000370073746172740022002200FFFFFF00B1 :10495000300073746172740022002200FFFFFF00B8
:1049600000A0400000A040000000400000564300AE :1049600000A0400000A040000000400000564300AE
:104970000046431FC5484300000000000000001F20 :104970000046431FC5484300000000000000001F20
:10498000856B3E000056430000464300004943004B :10498000856B3E000056430000464300004943004B

6
hex_files/3mm-RAMBo10a-PrusaNmk2.hex
View File

@ -1159,11 +1159,11 @@
:10486000543A002569206D696E2C202569207365F6 :10486000543A002569206D696E2C202569207365F6
:104870006300256920686F757273202569206D6952 :104870006300256920686F757273202569206D6952
:104880006E75746573004D313130004D3239004D15 :104880006E75746573004D313130004D3239004D15
:104890006172202039203230313600436F6D7069EB :104890006172203135203230313600436F6D7069DE
:1048A0006C65643A2000286E6F6E652C2064656626 :1048A0006C65643A2000286E6F6E652C2064656626
:1048B00061756C7420636F6E66696729004D617263 :1048B00061756C7420636F6E66696729004D617263
:1048C00020203920323031362031363A34323A34F1 :1048C00020313520323031362031313A34313A35E9
:1048D000340073746172740022002200FFFFFF0035 :1048D000380073746172740022002200FFFFFF0031
:1048E00000A0400000A0400000004000005643002F :1048E00000A0400000A0400000004000005643002F
:1048F0000046431FC5484300000000000000001FA1 :1048F0000046431FC5484300000000000000001FA1
:10490000856B3E00005643000046430000494300CB :10490000856B3E00005643000046430000494300CB

6
hex_files/3mm-RAMBo13a-PrusaNmk2.hex
View File

@ -1159,11 +1159,11 @@
:10486000543A002569206D696E2C202569207365F6 :10486000543A002569206D696E2C202569207365F6
:104870006300256920686F757273202569206D6952 :104870006300256920686F757273202569206D6952
:104880006E75746573004D313130004D3239004D15 :104880006E75746573004D313130004D3239004D15
:104890006172202039203230313600436F6D7069EB :104890006172203135203230313600436F6D7069DE
:1048A0006C65643A2000286E6F6E652C2064656626 :1048A0006C65643A2000286E6F6E652C2064656626
:1048B00061756C7420636F6E66696729004D617263 :1048B00061756C7420636F6E66696729004D617263
:1048C00020203920323031362031363A34333A30F4 :1048C00020313520323031362031313A34323A31EC
:1048D000320073746172740022002200FFFFFF0037 :1048D000340073746172740022002200FFFFFF0035
:1048E00000A0400000A0400000004000005643002F :1048E00000A0400000A0400000004000005643002F
:1048F0000046431FC5484300000000000000001FA1 :1048F0000046431FC5484300000000000000001FA1
:10490000856B3E00005643000046430000494300CB :10490000856B3E00005643000046430000494300CB

7592
hex_files/3mm-RAMBoBig-PrusaNmk2.hex Normal file
View File

File diff suppressed because it is too large Load Diff