Replace Set Ready menu entry

Replace "Set Ready"/"Set nor Ready" menu entry with "Print from host" entry.
Use "action:start" instead of "action:ready"

Firmware/messages.cpp

@@ -103,8 +103,12 @@ const char MSG_SELFTEST_MOTOR[] PROGMEM_I1 = ISTR("Motor"); ////MSG_SELFTEST_MOT
 const char MSG_SELFTEST_FILAMENT_SENSOR[] PROGMEM_I1 = ISTR("Filament sensor"); ////MSG_SELFTEST_FILAMENT_SENSOR c=17
 const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////MSG_SELFTEST_WIRINGERROR c=18
 const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////MSG_SETTINGS c=18
+#ifndef REPLACE_SETREADY
 const char MSG_SET_READY[] PROGMEM_I1 = ISTR("Set Ready"); ////MSG_SET_READY c=18
 const char MSG_SET_NOT_READY[] PROGMEM_I1 = ISTR("Set not Ready"); ////MSG_SET_NOT_READY c=18
+#else
+const char MSG_HOSTPRINT[] PROGMEM_I1 = ISTR("Print from host"); ////MSG_HOSTPRINT c=18
+#endif //REPLACE_SETREADY
 #ifdef HOST_SHUTDOWN
 const char MSG_SHUTDOWN_HOST[] PROGMEM_I1 = ISTR("Shutdown host"); ////MSG_SHUTDOWN_HOST c=18
 #endif //HOST_SHUTOWN

Firmware/messages.h

@@ -105,8 +105,12 @@ extern const char MSG_SELFTEST_MOTOR[];
 extern const char MSG_SELFTEST_FILAMENT_SENSOR[];
 extern const char MSG_SELFTEST_WIRINGERROR[];
 extern const char MSG_SETTINGS[];
+#ifndef REPLACE_SETREADY
 extern const char MSG_SET_READY[];
 extern const char MSG_SET_NOT_READY[];
+#else
+extern const char MSG_HOSTPRINT[];
+#endif
 #ifdef HOST_SHUTDOWN
 extern const char MSG_SHUTDOWN_HOST[];
 #endif //HOST_SHUTOWN

Firmware/ultralcd.cpp

@@ -5158,6 +5158,7 @@ static void lcd_sheet_menu()
     MENU_END();
 }
 
+#ifndef REPLACE_SETREADY
 //! @brief Set printer state
 //! Sends the printer state for next print via LCD menu to host
 //! The host has to set the printer ready state with `M72` to keep printer in sync with the host
@@ -5171,6 +5172,7 @@ static void lcd_printer_ready_state_toggle()
         SERIAL_ECHOLNRPGM(MSG_HOST_ACTION_READY);
     }
 }
+#endif
 
 #ifdef HOST_SHUTDOWN
 static void lcd_shutdown_menu()
@@ -5271,11 +5273,15 @@ static void lcd_main_menu()
         } else if (!Stopped) {
             MENU_ITEM_SUBMENU_P(_T(MSG_PREHEAT), lcd_preheat_menu);
             if (M79_timer_get_status()) {
+                #ifndef REPLACE_SETREADY
                 if(GetPrinterState() == PrinterState::IsReady) {
                     MENU_ITEM_FUNCTION_P(_T(MSG_SET_NOT_READY), lcd_printer_ready_state_toggle);
                 } else {
                     MENU_ITEM_FUNCTION_P(_T(MSG_SET_READY), lcd_printer_ready_state_toggle);
                 }
+                #else
+                    MENU_ITEM_FUNCTION_P(_T(MSG_HOSTPRINT), lcd_send_action_start);
+                #endif //REPLACE_SETREADY
             }
         }
         if (mesh_bed_leveling_flag == false && homing_flag == false && !printingIsPaused() && !processing_tcode) {

Firmware/variants/MK25-RAMBo10a.h

@@ -264,7 +264,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK25-RAMBo13a.h

@@ -265,7 +265,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK25S-RAMBo10a.h

@@ -264,7 +264,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK25S-RAMBo13a.h

@@ -265,7 +265,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK3-E3DREVO.h

@@ -423,7 +423,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK3-E3DREVO_HF_60W.h

@@ -424,7 +424,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK3.h

@@ -426,7 +426,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK3S-E3DREVO.h

@@ -427,7 +427,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK3S-E3DREVO_HF_60W.h

@@ -428,7 +428,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/MK3S.h

@@ -430,7 +430,13 @@
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
  MOTOR CURRENT SETTINGS

Firmware/variants/obsolete/1_75mm_MK2-RAMBo10a-E3Dv6full.h

@@ -191,7 +191,13 @@ ADDITIONAL FEATURES SETTINGS
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
 MOTOR CURRENT SETTINGS

Firmware/variants/obsolete/1_75mm_MK2-RAMBo13a-E3Dv6full.h

@@ -190,7 +190,13 @@ ADDITIONAL FEATURES SETTINGS
  HOST FEATURES
  *------------------------------------*/
 
-//#define HOST_SHUTDOWN              //Host supports "//action:shutdown" feature
+// Uncomment if the host supports '//action:shutdown'. It will add "Shutdown host" to the LCD meun. 
+//#define HOST_SHUTDOWN
+
+// Uncomment if the host doesn't support '//action:ready' & '//action:notready'.
+// This will replace the "Set Ready"/"Set not Ready" LCD menu entry with
+// "Print from host" and send '//action:start' instead.
+//#define REPLACE_SETREADY
 
 /*------------------------------------
 MOTOR CURRENT SETTINGS

lang/po/Firmware.pot

@@ -1970,6 +1970,11 @@ msgstr ""
 msgid "Set not Ready"
 msgstr ""
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr ""
+
 #. MSG_SET_TEMPERATURE c=20
 #: ../../Firmware/messages.cpp:262 ../../Firmware/ultralcd.cpp:2730
 msgid "Set temperature:"

lang/po/Firmware_cs.po

@@ -2573,6 +2573,11 @@ msgstr "Připravit"
 msgid "Set not Ready"
 msgstr "Zrušit Připravena"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Tisk z hosta"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_de.po

@@ -2601,6 +2601,11 @@ msgstr "Bereit setzen"
 msgid "Set not Ready"
 msgstr "Nicht breit setzen"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Drucken vom Host"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_es.po

@@ -2596,6 +2596,11 @@ msgstr "Listo"
 msgid "Set not Ready"
 msgstr "Conjunto no listo"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Imprimir host"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_fr.po

@@ -2608,6 +2608,11 @@ msgstr "Ensemble prête"
 msgid "Set not Ready"
 msgstr "Ensemble pas prête"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Impr depuis l'hôte"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_hr.po

@@ -2590,6 +2590,11 @@ msgstr "Set spreman"
 msgid "Set not Ready"
 msgstr "Set nije spreman"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Printaj sa host"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_hu.po

@@ -2593,7 +2593,12 @@ msgstr "Készen áll"
 #. MSG_SET_NOT_READY c=18
 #: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5263
 msgid "Set not Ready"
-msgstr "Készen nem áll"
+msgstr "Nem áll készen"
+
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Nyomtatás gépről"
 
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243

lang/po/Firmware_it.po

@@ -2596,6 +2596,11 @@ msgstr "Imposta pronta"
 msgid "Set not Ready"
 msgstr "Imposta non pronta"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Stampa da host"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_nl.po

@@ -2598,6 +2598,11 @@ msgstr "Gereed zetten"
 msgid "Set not Ready"
 msgstr "Niet gereed zetten"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Print van host"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_no.po

@@ -2572,6 +2572,11 @@ msgstr "Gjør klar"
 msgid "Set not Ready"
 msgstr "Sett ikke klar"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Print fra vert"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_pl.po

@@ -2588,6 +2588,11 @@ msgstr "Ustaw gotowość"
 msgid "Set not Ready"
 msgstr "Cofnij gotowość"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Drukuj z hosta"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_ro.po

@@ -2597,6 +2597,11 @@ msgstr "Printer pregătit"
 msgid "Set not Ready"
 msgstr "Print. nu pregătit"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Print. de pe gazdă"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_sk.po

@@ -2578,6 +2578,11 @@ msgstr "Pripravené"
 msgid "Set not Ready"
 msgstr "Nie je pripravené"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Tlač z hostiteľa"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245

lang/po/Firmware_sv.po

@@ -2585,6 +2585,11 @@ msgstr "Gör klar"
 msgid "Set not Ready"
 msgstr "Set inte klart"
 
+#. MSG_HOSTPRINT c=18
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5285
+msgid "Print from host"
+msgstr "Skriv ut från värd"
+
 #. MSG_REPRINT c=18
 #: ../../Firmware/messages.cpp:196 ../../Firmware/ultralcd.cpp:5243
 #: ../../Firmware/ultralcd.cpp:5245