josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Force-move-Z after searching for XY calibration points 

Bogus StallGuard readings may prevent the Z from moving at this spot which will result in other nasty behaviour.
This commit is contained in:
D.R.racer 2023-08-31 07:48:28 +02:00
parent 9e09e5014c
commit abdfe07f3f
1 changed files with 14 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Firmware/mesh_bed_calibration.cpp
View File

@ -2795,16 +2795,22 @@ canceled:
#endif //NEW_XYZCAL
bool sample_z() {
bool sampled = true;
//make space
raise_z(150);
lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
bool sampled = true;
// make some space for the sheet
// Avoid calling raise_z(), because a false triggering stallguard may prevent the Z from moving.
// The extruder then may ram the sheet hard if not going down from some ~150mm height
current_position[Z_AXIS] = 0.F;
destination[Z_AXIS] = 150.F;
plan_buffer_line_destinationXYZE(homing_feedrate[Z_AXIS] / 60);
// Sample Z heights for the mesh bed leveling.
// In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
if (!sample_mesh_and_store_reference()) sampled = false;
lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
return sampled;
// Sample Z heights for the mesh bed leveling.
// In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
if (!sample_mesh_and_store_reference())
sampled = false;
return sampled;
}
void go_home_with_z_lift()