josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Prompt user for Z calibration after failed MBL with yes-no screen

This commit is contained in:
Alex Voinea 2024-09-01 12:38:57 +02:00
parent 357b68cf76
commit b58d2ecccb
19 changed files with 91 additions and 80 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Firmware/Marlin_main.cpp
View File

@ -2772,7 +2772,10 @@ static void gcode_G80()
static uint8_t g80_fail_cnt = 0;
if (mesh_point != MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS) {
if (g80_fail_cnt++ >= 1) {
kill(_T(MSG_MBL_FAILED_Z_CAL));
print_stop();
lcd_show_fullscreen_message_and_wait_P(_T(MSG_MBL_FAILED));
lcd_z_calibration_prompt(false);
goto exit;
}
Sound_MakeSound(e_SOUND_TYPE_StandardAlert);
bool bState;
@ -2817,7 +2820,7 @@ static void gcode_G80()
#endif
babystep_apply(); // Apply Z height correction aka baby stepping before mesh bed leveing gets activated.
// Apply the bed level correction to the mesh
{ // Apply the bed level correction to the mesh
bool eeprom_bed_correction_valid = eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1;
auto bedCorrectHelper = [eeprom_bed_correction_valid] (char code, uint8_t *eep_address) -> int8_t {
if (code_seen(code)) {
@ -2849,13 +2852,16 @@ static void gcode_G80()
+ correction[3] * row);
}
}
}
mbl.upsample_3x3(); //interpolation from 3x3 to 7x7 points using largrangian polynomials while using the same array z_values[iy][ix] for storing (just coppying measured data to new destination and interpolating between them)
{ // apply magnet compensation
uint8_t useMagnetCompensation = code_seen('M') ? code_value_uint8() : eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION);
if (nMeasPoints == 7 && useMagnetCompensation) {
mbl_magnet_elimination();
}
}
mbl.active = 1; //activate mesh bed leveling
@ -2874,6 +2880,7 @@ static void gcode_G80()
plan_buffer_line_curposXYZE(400);
}
#endif // !PINDA_THERMISTOR
exit:
KEEPALIVE_STATE(NOT_BUSY);
// Restore custom message state
lcd_setstatuspgm(MSG_WELCOME);

2
Firmware/messages.cpp
View File

@ -212,7 +212,7 @@ extern const char MSG_CHANGED_PRINTER [] PROGMEM_I1 = ISTR("Warning: printer typ
extern const char MSG_CHANGED_BOTH [] PROGMEM_I1 = ISTR("Warning: both printer type and motherboard type changed."); ////MSG_CHANGED_BOTH c=20 r=4
extern const char MSG_DEFAULT_SETTINGS_LOADED [] PROGMEM_I1 = ISTR("Old settings found. Default PID, Esteps etc. will be set."); ////MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
extern const char MSG_FORCE_SELFTEST [] PROGMEM_I1 = ISTR("Selftest will be run to calibrate accurate sensorless rehoming."); ////MSG_FORCE_SELFTEST c=20 r=8
extern const char MSG_MBL_FAILED_Z_CAL [] PROGMEM_I1 = ISTR("Mesh bed leveling failed. Please run Z calibration."); ////MSG_MBL_FAILED_Z_CAL c=20 r=4
extern const char MSG_MBL_FAILED [] PROGMEM_I1 = ISTR("Mesh bed leveling failed. Print canceled."); ////MSG_MBL_FAILED c=20 r=4
extern const char MSG_ZLEVELING_ENFORCED [] PROGMEM_I1 = ISTR("Some problem encountered, Z-leveling enforced ..."); ////MSG_ZLEVELING_ENFORCED c=20 r=4
extern const char MSG_UNLOAD_SUCCESSFUL [] PROGMEM_I1 = ISTR("Was filament unload successful?"); ////MSG_UNLOAD_SUCCESSFUL c=20 r=3
extern const char MSG_CHECK_IDLER [] PROGMEM_I1 = ISTR("Please open idler and remove filament manually."); ////MSG_CHECK_IDLER c=20 r=4

2
Firmware/messages.h
View File

@ -211,7 +211,7 @@ extern const char MSG_CHANGED_PRINTER [];
extern const char MSG_CHANGED_BOTH [];
extern const char MSG_DEFAULT_SETTINGS_LOADED [];
extern const char MSG_FORCE_SELFTEST [];
extern const char MSG_MBL_FAILED_Z_CAL [];
extern const char MSG_MBL_FAILED [];
extern const char MSG_ZLEVELING_ENFORCED [];
extern const char MSG_UNLOAD_SUCCESSFUL [];
extern const char MSG_CHECK_IDLER [];

11
Firmware/ultralcd.cpp
View File

@ -3748,6 +3748,12 @@ static void wizard_lay1cal_message(bool cold)
_T(MSG_WIZARD_V2_CAL_2));
}
void lcd_z_calibration_prompt(bool allowTimeouting) {
uint8_t result = lcd_show_multiscreen_message_yes_no_and_wait_P(_T(MSG_Z_CALIBRATION_PROMPT), allowTimeouting, 0);
if (result == LCD_LEFT_BUTTON_CHOICE) {
lcd_mesh_calibration_z();
}
}
void prompt_steel_sheet_on_bed(bool wantedState) {
#ifdef STEEL_SHEET
@ -5546,10 +5552,7 @@ static void lcd_mesh_bed_leveling_settings()
ON_MENU_LEAVE(
// Prompt user to run Z calibration for best results with region MBL.
if (points_nr == 7) {
uint8_t result = lcd_show_multiscreen_message_yes_no_and_wait_P(_T(MSG_Z_CALIBRATION_PROMPT), true, 0);
if (result == LCD_LEFT_BUTTON_CHOICE) {
lcd_mesh_calibration_z();
}
lcd_z_calibration_prompt(true);
}
);
MENU_ITEM_BACK_P(_T(MSG_SETTINGS));

1
Firmware/ultralcd.h
View File

@ -220,6 +220,7 @@ void lcd_temp_calibration_set();
void lcd_language();
#endif
void lcd_z_calibration_prompt(bool allowTimeouting);
void prompt_steel_sheet_on_bed(bool wantedState);
void lcd_wizard();

4
lang/po/Firmware.pot
View File

@ -1203,9 +1203,9 @@ msgstr ""
msgid "Mesh Bed Leveling"
msgstr ""
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgid "Mesh bed leveling failed. Print canceled."
msgstr ""
#. MSG_MODE c=6

6
lang/po/Firmware_cs.po
View File

@ -2551,10 +2551,10 @@ msgstr "Výměna filamentu M600. Vložte nový filament nebo vysuňte starý."
msgid "Sensitivity"
msgstr "Citlivost"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Mesh Bed Leveling selhal. Spusťte kalibraci osy Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Mesh Bed Leveling selhal."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_de.po
View File

@ -2579,10 +2579,10 @@ msgstr ""
msgid "Sensitivity"
msgstr "Sensitivität"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "MeshBett Ausgleich fehlgeschlagen. Z Kalibrierung ausführen."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "MeshBett Ausgleich fehlgeschlagen."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_es.po
View File

@ -2574,10 +2574,10 @@ msgstr ""
msgid "Sensitivity"
msgstr "Sensibilidad"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Nivelación fallida. Ejecute la calibración Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Nivelación fallida."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_fr.po
View File

@ -2586,10 +2586,10 @@ msgstr ""
msgid "Sensitivity"
msgstr "Sensibilité"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Mesh bed leveling a échoué. Veuillez procéder à l'étalonnage Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Mesh bed leveling a échoué."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_hr.po
View File

@ -2568,10 +2568,10 @@ msgstr "Promjena filamenta M600. Stavite novu nit ili izbacite staru."
msgid "Sensitivity"
msgstr "Osjetljivost"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Niveliranje podloge nije uspijelo. Pokrenite Z kalibraciju."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Niveliranje podloge nije uspijelo."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_hu.po
View File

@ -2573,10 +2573,10 @@ msgstr ""
msgid "Sensitivity"
msgstr "Érzékenység"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Sikertelen asztal szintezés. Kérjük, futtasd a Z kalibrálást."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Sikertelen asztal szintezés."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_it.po
View File

@ -2574,10 +2574,10 @@ msgstr ""
msgid "Sensitivity"
msgstr "Sensibilità"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Livellamento piano fallito. Si prega di eseguire la calibrazione Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Livellamento piano fallito."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_nl.po
View File

@ -2576,10 +2576,10 @@ msgstr "M600-filamentwissel. Laad een nieuw filament of werp het oude uit."
msgid "Sensitivity"
msgstr "Sensitiviteit"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Bed leveling mislukt. Voer de Z-kalibratie uit."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Bed leveling mislukt."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_no.po
View File

@ -2550,10 +2550,10 @@ msgstr "M600 filamentskifte. Sett inn en ny filament eller løs ut den gamle."
msgid "Sensitivity"
msgstr "Sensitivitet"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Sengeplanering feilet. Kjør Z-kalibrering."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Sengeplanering feilet."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_pl.po
View File

@ -2566,10 +2566,10 @@ msgstr "Załaduj nowy filament lub wyładuj poprzedni."
msgid "Sensitivity"
msgstr "Czułość"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Poziomowanie stołu nieudane. Proszę uruchomić kalibrację Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Poziomowanie stołu nieudane."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_ro.po
View File

@ -2575,10 +2575,10 @@ msgstr ""
msgid "Sensitivity"
msgstr "Sensibilitate"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Nivelarea patului a eșuat. Rulează Calibrare Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Nivelarea patului a eșuat."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_sk.po
View File

@ -2556,10 +2556,10 @@ msgstr "Výmena filamentu M600. Vložte nový filament alebo vysuňte starý."
msgid "Sensitivity"
msgstr "Citlivosť"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Vyrovnanie platne zlyhalo. Spustite kalibráciu Z."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Vyrovnanie platne zlyhalo."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265

6
lang/po/Firmware_sv.po
View File

@ -2563,10 +2563,10 @@ msgstr "M600 filamentbyte. Ladda en ny filament eller mata ut den gamla."
msgid "Sensitivity"
msgstr "Känslighet"
#. MSG_MBL_FAILED_Z_CAL c=20 r=4
#. MSG_MBL_FAILED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3038 ../../Firmware/messages.cpp:203
msgid "Mesh bed leveling failed. Please run Z calibration."
msgstr "Bäddnivelleringen felade. Kör Z-kalibrering."
msgid "Mesh bed leveling failed. Print canceled."
msgstr "Bäddnivelleringen felade."
#. MSG_SET_READY c=18
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:5265