josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

M commands documentation #1

This commit is contained in:
3d-gussner 2019-10-30 18:52:25 +01:00
parent b9dca5f895
commit ce8dbb5013
1 changed files with 119 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

191
Firmware/Marlin_main.cpp
View File

@ -5318,7 +5318,7 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
{
/*!
### M0, M1 - Stop the printer <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
### M0, M1 - Stop the printer <a href="https://reprap.org/wiki/G-code#M0:_Stop_or_Unconditional_stop">M0: Stop or Unconditional stop</a>
*/ ---------------------------------------------------------------
case 0: // M0 - Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD
@ -5368,7 +5368,7 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
break;
//! ### M17 - Enable axes <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
//! ### M17 - Enable axes <a href="https://reprap.org/wiki/G-code#M17:_Enable.2FPower_all_stepper_motors">M17: Enable/Power all stepper motors</a>
// ---------------------------------
case 17:
LCD_MESSAGERPGM(_i("No move."));////MSG_NO_MOVE
@ -5382,28 +5382,32 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
#ifdef SDSUPPORT
//! ### M20 - SD Card file list <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------
/*!
### M20 - SD Card file list <a href="https://reprap.org/wiki/G-code#M20:_List_SD_card">M20: List SD card</a>
*/ -----------------------------------
case 20:
SERIAL_PROTOCOLLNRPGM(_N("Begin file list"));////MSG_BEGIN_FILE_LIST
card.ls();
SERIAL_PROTOCOLLNRPGM(_N("End file list"));////MSG_END_FILE_LIST
break;
//! ### M21 - Init SD card <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ------------------------------------
/*!
### M21 - Init SD card <a href="https://reprap.org/wiki/G-code#M21:_Initialize_SD_card">M21: Initialize SD card</a>
*/ ------------------------------------
case 21:
card.initsd();
break;
//! ### M22 - Release SD card <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------
/*!
### M22 - Release SD card <a href="https://reprap.org/wiki/G-code#M22:_Release_SD_card">M22: Release SD card</a>
*/ -----------------------------------
case 22:
card.release();
break;
//! ### M23 - Select file <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------
/*!
### M23 - Select file <a href="https://reprap.org/wiki/G-code#M23:_Select_SD_file">M23: Select SD file</a>
*/ -----------------------------------
case 23:
starpos = (strchr(strchr_pointer + 4,'*'));
if(starpos!=NULL)
@ -5411,8 +5415,9 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
card.openFile(strchr_pointer + 4,true);
break;
//! ### M24 - Start SD print <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ----------------------------------
/*!
### M24 - Start SD print <a href="https://reprap.org/wiki/G-code#M24:_Start.2Fresume_SD_print">M24: Start/resume SD print</a>
*/ ----------------------------------
case 24:
if (!card.paused)
failstats_reset_print();
@ -5420,17 +5425,19 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
starttime=_millis();
break;
//! ### M25 - Pause SD print <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ----------------------------------
/*!
### M25 - Pause SD print <a href="https://reprap.org/wiki/G-code#M25:_Pause_SD_print">M25: Pause SD print</a>
*/ ----------------------------------
case 25:
card.pauseSDPrint();
break;
//! ### M26 S\<index\> - Set SD index <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
//! Set position in SD card file to index in bytes.
//! This command is expected to be called after M23 and before M24.
//! Otherwise effect of this command is undefined.
// ----------------------------------
/*!
### M26 S\<index\> - Set SD index <a href="https://reprap.org/wiki/G-code#M26:_Set_SD_position">M26: Set SD position</a>
Set position in SD card file to index in bytes.
This command is expected to be called after M23 and before M24.
Otherwise effect of this command is undefined.
*/ ----------------------------------
case 26:
if(card.cardOK && code_seen('S')) {
long index = code_value_long();
@ -5441,14 +5448,16 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
break;
//! ### M27 - Get SD status <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ----------------------------------
/*!
### M27 - Get SD status <a href="https://reprap.org/wiki/G-code#M27:_Report_SD_print_status">M27: Report SD print status</a>
*/ ----------------------------------
case 27:
card.getStatus();
break;
//! ### M28 - Start SD write <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ---------------------------------
/*!
### M28 - Start SD write <a href="https://reprap.org/wiki/G-code#M28:_Begin_write_to_SD_card">M28: Begin write to SD card</a>
*/ ---------------------------------
case 28:
starpos = (strchr(strchr_pointer + 4,'*'));
if(starpos != NULL){
@ -5459,16 +5468,17 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
card.openFile(strchr_pointer+4,false);
break;
//! ### M29 - Stop SD write <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -------------------------------------
//! Currently has no effect.
/*! ### M29 - Stop SD write <a href="https://reprap.org/wiki/G-code#M29:_Stop_writing_to_SD_card">M29: Stop writing to SD card</a>
Currently has no effect.
*/ -------------------------------------
case 29:
//processed in write to file routine above
//card,saving = false;
break;
//! ### M30 - Delete file <filename> <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ----------------------------------
/*!
### M30 - Delete file <filename> <a href="https://reprap.org/wiki/G-code#M30:_Delete_a_file_on_the_SD_card">M30: Delete a file on the SD card</a>
*/ ----------------------------------
case 30:
if (card.cardOK){
card.closefile();
@ -5482,8 +5492,10 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
break;
//! ### M32 - Select file and start SD print <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ------------------------------------
/*!
### M32 - Select file and start SD print <a href="https://reprap.org/wiki/G-code#M32:_Select_file_and_start_SD_print">M32: Select file and start SD print</a>
@todo What are the parameters P and S for in M32?
*/ ------------------------------------
case 32:
{
if(card.sdprinting) {
@ -5520,8 +5532,8 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
} break;
//! ### M982 - Start SD write <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ---------------------------------
/*! ### M982 - Start SD logging <a href="https://reprap.org/wiki/G-code#M928:_Start_SD_logging">M928: Start SD logging</a>
*/ ---------------------------------
case 928:
starpos = (strchr(strchr_pointer + 5,'*'));
if(starpos != NULL){
@ -5534,8 +5546,9 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
#endif //SDSUPPORT
//! ### M31 - Report current print time <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// --------------------------------------------------
/*!
### M31 - Report current print time <a href="https://reprap.org/wiki/G-code#M31:_Output_time_since_last_M109_or_SD_card_start_to_serial">M31: Output time since last M109 or SD card start to serial</a>
*/ --------------------------------------------------
case 31: //M31 take time since the start of the SD print or an M109 command
{
stoptime=_millis();
@ -5552,8 +5565,9 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
break;
//! ### M42 - Set pin state <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------
/*!
### M42 - Set pin state <a href="https://reprap.org/wiki/G-code#M42:_Switch_I.2FO_pin">M42: Switch I/O pin</a>
*/ -----------------------------
case 42:
if (code_seen('S'))
{
@ -5583,8 +5597,9 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
break;
//! ### M44 - Reset the bed skew and offset calibration (Prusa specific) <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// --------------------------------------------------------------------
/*!
### M44 - Reset the bed skew and offset calibration (Prusa specific) <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">M44: Reset the bed skew and offset calibration</a>
*/ --------------------------------------------------------------------
case 44: // M44: Prusa3D: Reset the bed skew and offset calibration.
// Reset the baby step value and the baby step applied flag.
@ -5599,8 +5614,12 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
world2machine_revert_to_uncorrected();
break;
//! ### M45 - Bed skew and offset with manual Z up (Prusa specific) <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ------------------------------------------------------
/*!
### M45 - Bed skew and offset with manual Z up (Prusa specific) <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">M45: Bed skew and offset with manual Z up</a>
G80 [ V ]
- V Verbosity level 1, 10 and 20 (low, mid, high). Only when SUPPORT_VERBOSITY is defined.
*/ ------------------------------------------------------
case 45: // M45: Prusa3D: bed skew and offset with manual Z up
{
int8_t verbosity_level = 0;
@ -5640,8 +5659,9 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
*/
//! ### M47 - Show end stops dialog on the display (Prusa specific) <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ----------------------------------------------------
/*!
### M47 - Show end stops dialog on the display<a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">M47: Show end stops dialog on the display</a>
*/ ----------------------------------------------------
case 47:
KEEPALIVE_STATE(PAUSED_FOR_USER);
@ -5689,22 +5709,22 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
#ifdef ENABLE_AUTO_BED_LEVELING
#ifdef Z_PROBE_REPEATABILITY_TEST
//! ### M48 - Z-Probe repeatability measurement function. <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// ------------------------------------------------------
//!
//! _Usage:_
//!
//! M48 <n #_samples> <X X_position_for_samples> <Y Y_position_for_samples> <V Verbose_Level> <L legs_of_movement_prior_to_doing_probe>
//!
//! This function assumes the bed has been homed. Specifically, that a G28 command
//! as been issued prior to invoking the M48 Z-Probe repeatability measurement function.
//! Any information generated by a prior G29 Bed leveling command will be lost and need to be
//! regenerated.
//!
//! The number of samples will default to 10 if not specified. You can use upper or lower case
//! letters for any of the options EXCEPT n. n must be in lower case because Marlin uses a capital
//! N for its communication protocol and will get horribly confused if you send it a capital N.
//!
/*!
### M48 - Z-Probe repeatability measurement function. <a href="https://reprap.org/wiki/G-code#M48:_Measure_Z-Probe_repeatability">M48: Measure Z-Probe repeatability</a>
This function assumes the bed has been homed. Specifically, that a G28 command as been issued prior to invoking the M48 Z-Probe repeatability measurement function. Any information generated by a prior G29 Bed leveling command will be lost and need to be regenerated.
The number of samples will default to 10 if not specified. You can use upper or lower case letters for any of the options EXCEPT n. n must be in lower case because Marlin uses a capital N for its communication protocol and will get horribly confused if you send it a capital N.
M48 [ n | X | Y | V | L ]
- n - Number of samples. Valid values 4-50
- X - X position for samples
- Y - Y position for samples
- V - Verbose level. Valid values 1-4
- L - Legs of movementprior to doing probe. Valid values 1-15
*/
case 48: // M48 Z-Probe repeatability
{
#if Z_MIN_PIN == -1
@ -5943,12 +5963,17 @@ Sigma_Exit:
#endif // Z_PROBE_REPEATABILITY_TEST
#endif // ENABLE_AUTO_BED_LEVELING
//! ### M73 - Set/get print progress <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -------------------------------------
//! _Usage:_
//!
//! M73 P<percent> R<time_remaining> Q<percent_silent> S<time_remaining_silent>
//!
/*!
### M73 - Set/get print progress <a href="https://reprap.org/wiki/G-code#M73:_Set.2FGet_build_percentage">M73: Set/Get build percentage</a>
Prusa firmware just shows percent done and time remaining.
M73 [ P | R | Q | S ]
- P - Percent in normal mode
- R - Time remaining in normal mode
- Q - Percent in silent mode
- S - Time in silent mode
*/
case 73: //M73 show percent done and time remaining
if(code_seen('P')) print_percent_done_normal = code_value();
if(code_seen('R')) print_time_remaining_normal = code_value();
@ -5962,8 +5987,13 @@ Sigma_Exit:
}
break;
//! ### M104 - Set hotend temperature <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------------
/*!
### M104 - Set hotend temperature <a href="https://reprap.org/wiki/G-code#M104:_Set_Extruder_Temperature">M104: Set Extruder Temperature</a>
M104 [ S ]
- S - Target temperature
*/ -----------------------------------------
case 104: // M104
{
uint8_t extruder;
@ -5977,20 +6007,37 @@ Sigma_Exit:
break;
}
//! ### M112 - Emergency stop <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------------
/*!
### M112 - Emergency stop <a href="https://reprap.org/wiki/G-code#M112:_Full_.28Emergency.29_Stop">M112: Full (Emergency) Stop</a>
*/ -----------------------------------------
case 112:
kill(_n(""), 3);
break;
//! ### M140 - Set bed temperature <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------------
/*!
### M140 - Set bed temperature <a href="https://reprap.org/wiki/G-code#M140:_Set_Bed_Temperature_.28Fast.29">M140: Set Bed Temperature (Fast)</a>
*/ -----------------------------------------
case 140:
if (code_seen('S')) setTargetBed(code_value());
break;
//! ### M105 - Report temperatures <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
// -----------------------------------------
/*!
### M105 - Report temperatures <a href="https://reprap.org/wiki/G-code#M105:_Get_Extruder_Temperature">M105: Get Extruder Temperature</a>
Prints temperatures:
- T: - Hotend (actual / target)
- B: - Bed (actual / target)
- Tx: - x Tool (actual / target)
- @: - Hotend power
- B@: - Bed power
- P: - PINDAv2 actual (only MK2.5/s and MK3.5/s)
- A: - Ambient actual (only MK3/s)
_Example:_
ok T:20.2 /0.0 B:19.1 /0.0 T0:20.2 /0.0 @:0 B@:0 P:19.8 A:26.4
*/ -----------------------------------------
case 105:
{
uint8_t extruder;