josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #265 from PavelSindler/MK2 

PL updated
This commit is contained in:
PavelSindler 2017-11-09 16:19:54 +01:00 committed by GitHub
parent f2d9c00103 417dff8574
commit d319ddf21a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 160 additions and 161 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Marlin_main.cpp
View File

@ -2218,7 +2218,7 @@ bool gcode_M45(bool onlyZ) {
lcd_wait_for_cool_down();
lcd_show_fullscreen_message_and_wait_P(MSG_PAPER);
lcd_display_message_fullscreen_P(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1);
lcd_implementation_print_at(0, 2, 1);
lcd_implementation_print_at(0, 3, 1);
lcd_printPGM(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2);
}

159
Firmware/language_all.cpp
View File

@ -136,7 +136,7 @@ const char * const MSG_BABYSTEP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_BABYSTEP_Z_NOT_SET_EN[] PROGMEM = "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_CZ[] PROGMEM = "Neni zkalibrovana vzdalenost trysky od tiskove podlozky. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy.";
const char MSG_BABYSTEP_Z_NOT_SET_IT[] PROGMEM = "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_ES[] PROGMEM = "Distancia entre la punta de la boquilla y la superficie de la cama no fijada aun. Por favor siga el manual, capitulo First steps, seccion First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_ES[] PROGMEM = "Distancia entre la punta del nozzle y la superficie de la heatbed aun no fijada. Por favor siga el manual, capitulo First steps, First layer calibration.";
const char MSG_BABYSTEP_Z_NOT_SET_PL[] PROGMEM = "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy.";
const char MSG_BABYSTEP_Z_NOT_SET_DE[] PROGMEM = "Der Abstand zwischen der Spitze der Duese und der Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration.";
const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -150,7 +150,7 @@ const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_BED_EN[] PROGMEM = "Bed";
const char MSG_BED_IT[] PROGMEM = "Letto";
const char MSG_BED_ES[] PROGMEM = "Base";
const char MSG_BED_ES[] PROGMEM = "Heatbed";
const char MSG_BED_PL[] PROGMEM = "Stolik";
const char MSG_BED_DE[] PROGMEM = "Bett";
const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -165,7 +165,7 @@ const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side[um]";
const char MSG_BED_CORRECTION_FRONT_CZ[] PROGMEM = "Vpredu [um]";
const char MSG_BED_CORRECTION_FRONT_IT[] PROGMEM = "Fronte [um]";
const char MSG_BED_CORRECTION_FRONT_ES[] PROGMEM = "Adelante [um]";
const char MSG_BED_CORRECTION_FRONT_ES[] PROGMEM = "Frontal [um]";
const char MSG_BED_CORRECTION_FRONT_PL[] PROGMEM = "Do przodu [um]";
const char MSG_BED_CORRECTION_FRONT_DE[] PROGMEM = "Vorne [um]";
const char * const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -210,7 +210,7 @@ const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_BED_CORRECTION_REAR_EN[] PROGMEM = "Rear side [um]";
const char MSG_BED_CORRECTION_REAR_CZ[] PROGMEM = "Vzadu [um]";
const char MSG_BED_CORRECTION_REAR_IT[] PROGMEM = "Retro [um]";
const char MSG_BED_CORRECTION_REAR_ES[] PROGMEM = "Atras [um]";
const char MSG_BED_CORRECTION_REAR_ES[] PROGMEM = "Trasera [um]";
const char MSG_BED_CORRECTION_REAR_PL[] PROGMEM = "Do tylu [um]";
const char MSG_BED_CORRECTION_REAR_DE[] PROGMEM = "Hinten [um]";
const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -296,7 +296,7 @@ const char * const MSG_BED_LEVELING_FAILED_POINT_HIGH_LANG_TABLE[LANG_NUM] PROGM
const char MSG_BED_LEVELING_FAILED_POINT_LOW_EN[] PROGMEM = "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_IT[] PROGMEM = "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_ES[] PROGMEM = "Nivelacion fallada. Sensor no funciona. Escombros en Boqui.? Esperando reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_ES[] PROGMEM = "Nivelacion fallada. Sensor no funciona. Escombros en nozzle? Esperando reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_PL[] PROGMEM = "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset.";
const char MSG_BED_LEVELING_FAILED_POINT_LOW_DE[] PROGMEM = "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset";
const char * const MSG_BED_LEVELING_FAILED_POINT_LOW_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -326,7 +326,7 @@ const char * const MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_LANG_TABLE[LANG_NU
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration failed. Front calibration points not reachable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punti anteriori non raggiungibili.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delanteros no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibracion XYZ fallada. Puntos frontales no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit vorne.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -341,7 +341,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABL
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration failed. Left front calibration point not reachable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Levy predni bod moc vpredu. Srovnejte tiskarnu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibracion XYZ fallada. Punto frontal izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit vorne.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -356,7 +356,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABL
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration failed. Right front calibration point not reachable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto frontal derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit vorne.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -371,7 +371,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TAB
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN[] PROGMEM = "XYZ calibration failed. Please consult the manual.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ[] PROGMEM = "Kalibrace XYZ selhala. Nahlednete do manualu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_IT[] PROGMEM = "Calibrazione XYZ fallita. Si prega di consultare il manuale.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_ES[] PROGMEM = "Calibracion XYZ fallada. Consultar el manual por favor.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_ES[] PROGMEM = "Calibracion XYZ fallada. Consulta el manual por favor.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_PL[] PROGMEM = "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji.";
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -386,7 +386,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_LANG_TABLE[LANG_
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN[] PROGMEM = "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!";
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ[] PROGMEM = "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!";
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_IT[] PROGMEM = "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!";
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_ES[] PROGMEM = "Calibracion XYZ ok. Ejes X/Y perpendiculares. Felicitaciones!";
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_ES[] PROGMEM = "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!";
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_PL[] PROGMEM = "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!";
const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_DE[] PROGMEM = "XYZ-Kalibrierung OK. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -401,7 +401,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_LANG_TABLE[LANG_NUM] PR
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN[] PROGMEM = "XYZ calibration failed. Bed calibration point was not found.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ[] PROGMEM = "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_IT[] PROGMEM = "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_ES[] PROGMEM = "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_ES[] PROGMEM = "Calibracion XYZ fallada. Puntos de calibracion en heatbed no encontrados.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL[] PROGMEM = "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony.";
const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -446,7 +446,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_LANG_TABLE[LANG_NUM]
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration compromised. Front calibration points not reachable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delanteros no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Puntos frontales no alcanzables.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit vorne.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -461,7 +461,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TAB
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Left front calibration point not reachable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Levy predni bod moc vpredu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto frontal izquierdo no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit vorne.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -476,7 +476,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TAB
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Right front calibration point not reachable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu.";
const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit vorne.";
const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -664,7 +664,7 @@ const char * const MSG_CHOOSE_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_CLEAN_NOZZLE_E_EN[] PROGMEM = "E calibration finished. Please clean the nozzle. Click when done.";
const char MSG_CLEAN_NOZZLE_E_CZ[] PROGMEM = "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem.";
const char MSG_CLEAN_NOZZLE_E_IT[] PROGMEM = "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare.";
const char MSG_CLEAN_NOZZLE_E_ES[] PROGMEM = "E calibrado. Limpiar la boquilla. Haga clic una vez terminado.";
const char MSG_CLEAN_NOZZLE_E_ES[] PROGMEM = "E calibrado. Limpia nozzle. Haz clic una vez terminado.";
const char MSG_CLEAN_NOZZLE_E_PL[] PROGMEM = "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. ";
const char MSG_CLEAN_NOZZLE_E_DE[] PROGMEM = "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig.";
const char * const MSG_CLEAN_NOZZLE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -704,7 +704,7 @@ const char * const MSG_CONFIRM_CARRIAGE_AT_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM
const char MSG_CONFIRM_NOZZLE_CLEAN_EN[] PROGMEM = "Please clean the nozzle for calibration. Click when done.";
const char MSG_CONFIRM_NOZZLE_CLEAN_CZ[] PROGMEM = "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_IT[] PROGMEM = "Pulire l'ugello per la calibrazione, poi fare click.";
const char MSG_CONFIRM_NOZZLE_CLEAN_ES[] PROGMEM = "Limpiar boquilla para calibracion. Click cuando acabes.";
const char MSG_CONFIRM_NOZZLE_CLEAN_ES[] PROGMEM = "Limpia nozzle para calibracion. Click cuando acabes.";
const char MSG_CONFIRM_NOZZLE_CLEAN_PL[] PROGMEM = "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_DE[] PROGMEM = "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber.";
const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -719,7 +719,7 @@ const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN[] PROGMEM = "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ[] PROGMEM = "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_IT[] PROGMEM = "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_ES[] PROGMEM = "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_ES[] PROGMEM = "Filamentos ajustados. Limpia nozzle para calibracion. Haz clic una vez terminado.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_PL[] PROGMEM = "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem.";
const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE[] PROGMEM = "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig.";
const char * const MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -996,7 +996,7 @@ const char * const MSG_EXTRUDER_4_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_E_CAL_KNOB_EN[] PROGMEM = "Rotate knob until mark reaches extruder body. Click when done.";
const char MSG_E_CAL_KNOB_CZ[] PROGMEM = "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem.";
const char MSG_E_CAL_KNOB_IT[] PROGMEM = "Girare la manopola affinche' il segno raggiunga il corpo dell'estrusore. Click per continuare.";
const char MSG_E_CAL_KNOB_ES[] PROGMEM = "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haga clic una vez terminado.";
const char MSG_E_CAL_KNOB_ES[] PROGMEM = "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haz clic una vez terminado.";
const char MSG_E_CAL_KNOB_PL[] PROGMEM = "Prosze otaczac przycisk poki znacznik nie dosiegnie ciala ekstrudera. Potwierdzic przyciskiem.";
const char MSG_E_CAL_KNOB_DE[] PROGMEM = "Knopf drehen bis die Filamentmarkierung erreicht ist. Klicken wenn fertig.";
const char * const MSG_E_CAL_KNOB_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1071,7 +1071,7 @@ const char * const MSG_FILAMENT_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_FILAMENT_LOADING_T0_EN[] PROGMEM = "Insert filament into extruder 1. Click when done.";
const char MSG_FILAMENT_LOADING_T0_CZ[] PROGMEM = "Vlozte filament do extruderu 1. Potvrdte tlacitkem.";
const char MSG_FILAMENT_LOADING_T0_IT[] PROGMEM = "Inserire filamento nell'estrusore 1. Click per continuare.";
const char MSG_FILAMENT_LOADING_T0_ES[] PROGMEM = "Insertar filamento en el extrusor 1. Haga clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T0_ES[] PROGMEM = "Insertar filamento en el extrusor 1. Haz clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T0_PL[] PROGMEM = "Wloz filament do ekstrudera 1. Potwierdz przyciskiem.";
const char MSG_FILAMENT_LOADING_T0_DE[] PROGMEM = "Filament in extruder 1 einlegen. Klicken wenn fertig.";
const char * const MSG_FILAMENT_LOADING_T0_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1086,7 +1086,7 @@ const char * const MSG_FILAMENT_LOADING_T0_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_FILAMENT_LOADING_T1_EN[] PROGMEM = "Insert filament into extruder 2. Click when done.";
const char MSG_FILAMENT_LOADING_T1_CZ[] PROGMEM = "Vlozte filament do extruderu 2. Potvrdte tlacitkem.";
const char MSG_FILAMENT_LOADING_T1_IT[] PROGMEM = "Inserire filamento nell'estrusore 2. Click per continuare.";
const char MSG_FILAMENT_LOADING_T1_ES[] PROGMEM = "Insertar filamento en el extrusor 2. Haga clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T1_ES[] PROGMEM = "Insertar filamento en el extrusor 2. Haz clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T1_PL[] PROGMEM = "Wloz filament do ekstrudera 2. Potwierdz przyciskiem.";
const char MSG_FILAMENT_LOADING_T1_DE[] PROGMEM = "Filament in extruder 2 einlegen. Klicken wenn fertig.";
const char * const MSG_FILAMENT_LOADING_T1_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1101,7 +1101,7 @@ const char * const MSG_FILAMENT_LOADING_T1_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_FILAMENT_LOADING_T2_EN[] PROGMEM = "Insert filament into extruder 3. Click when done.";
const char MSG_FILAMENT_LOADING_T2_CZ[] PROGMEM = "Vlozte filament do extruderu 3. Potvrdte tlacitkem.";
const char MSG_FILAMENT_LOADING_T2_IT[] PROGMEM = "Inserire filamento nell'estrusore 3. Click per continuare.";
const char MSG_FILAMENT_LOADING_T2_ES[] PROGMEM = "Insertar filamento en el extrusor 3. Haga clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T2_ES[] PROGMEM = "Insertar filamento en el extrusor 3. Haz clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T2_PL[] PROGMEM = "Wloz filament do ekstrudera 3. Potwierdz przyciskiem.";
const char MSG_FILAMENT_LOADING_T2_DE[] PROGMEM = "Filament in extruder 3 einlegen. Klicken wenn fertig.";
const char * const MSG_FILAMENT_LOADING_T2_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1116,7 +1116,7 @@ const char * const MSG_FILAMENT_LOADING_T2_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_FILAMENT_LOADING_T3_EN[] PROGMEM = "Insert filament into extruder 4. Click when done.";
const char MSG_FILAMENT_LOADING_T3_CZ[] PROGMEM = "Vlozte filament do extruderu 4. Potvrdte tlacitkem.";
const char MSG_FILAMENT_LOADING_T3_IT[] PROGMEM = "Inserire filamento nell'estrusore 4. Click per continuare.";
const char MSG_FILAMENT_LOADING_T3_ES[] PROGMEM = "Insertar filamento en el extrusor 4. Haga clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T3_ES[] PROGMEM = "Insertar filamento en el extrusor 4. Haz clic una vez terminado.";
const char MSG_FILAMENT_LOADING_T3_PL[] PROGMEM = "Wloz filament do ekstrudera 4. Potwierdz przyciskiem.";
const char MSG_FILAMENT_LOADING_T3_DE[] PROGMEM = "Filament in extruder 4 einlegen. Klicken wenn fertig.";
const char * const MSG_FILAMENT_LOADING_T3_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1171,7 +1171,7 @@ const char * const MSG_FILE_SAVED_LANG_TABLE[1] PROGMEM = {
const char MSG_FIL_ADJUSTING_EN[] PROGMEM = "Adjusting filaments. Please wait.";
const char MSG_FIL_ADJUSTING_CZ[] PROGMEM = "Probiha srovnani filamentu. Prosim cekejte.";
const char MSG_FIL_ADJUSTING_IT[] PROGMEM = "Filamento in fase di regolazione. Attendere prego.";
const char MSG_FIL_ADJUSTING_ES[] PROGMEM = "Ajustando filamentos. Esperar por favor.";
const char MSG_FIL_ADJUSTING_ES[] PROGMEM = "Ajustando filamentos. Espera por favor.";
const char MSG_FIL_ADJUSTING_PL[] PROGMEM = "Przebiega wyrownanie filamentow. Prosze czekac.";
const char MSG_FIL_ADJUSTING_DE[] PROGMEM = "Filament positionieren. Bitte warten.";
const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1200,7 +1200,7 @@ const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] P
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Searching bed calibration point";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Hledam kalibracni bod podlozky";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Ricerca del letto punto di calibraz.";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Buscando cama punto de calibracion";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Buscando punto de calibracion heatbed";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Szukam punktu kalibracyjnego podkladki";
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Suchen Bett Kalibrierpunkt";
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1275,7 +1275,7 @@ const char * const MSG_FLOW2_LANG_TABLE[1] PROGMEM = {
const char MSG_FOLLOW_CALIBRATION_FLOW_EN[] PROGMEM = "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow.";
const char MSG_FOLLOW_CALIBRATION_FLOW_CZ[] PROGMEM = "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace.";
const char MSG_FOLLOW_CALIBRATION_FLOW_IT[] PROGMEM = "Stampante ancora non calibrata. Si prega di seguire il manuale, capitolo PRIMI PASSI, sezione della calibrazione.";
const char MSG_FOLLOW_CALIBRATION_FLOW_ES[] PROGMEM = "Impresora no esta calibrada todavia. Por favor usar el manual, el capitulo First steps, seleccion Calibration flow.";
const char MSG_FOLLOW_CALIBRATION_FLOW_ES[] PROGMEM = "Impresora no esta calibrada todavia. Por favor usa el manual, capitulo First steps, Calibration flow.";
const char MSG_FOLLOW_CALIBRATION_FLOW_PL[] PROGMEM = "Drukarka nie zostala jeszcze skalibrowana. Prosze kierowac sie instrukcja, rozdzial Zaczynamy, podrozdzial Selftest.";
const char MSG_FOLLOW_CALIBRATION_FLOW_DE[] PROGMEM = "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie das Handbuch, Kapitel First steps, Abschnitt Calibration flow.";
const char * const MSG_FOLLOW_CALIBRATION_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1375,7 +1375,7 @@ const char * const MSG_HOTEND_OFFSET_LANG_TABLE[1] PROGMEM = {
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Improving bed calibration point";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Zlepsuji presnost kalibracniho bodu";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Perfezion. il letto punto di calibraz.";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Mejorando cama punto de calibracion";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Mejorando punto de calibracion heatbed";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Poprawiam precyzyjnosc punktu kalibracyjnego";
const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Verbesserung Bett Kalibrierpunkt";
const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1683,7 +1683,7 @@ const char * const MSG_MAIN_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_MARK_FIL_EN[] PROGMEM = "Mark filament 100mm from extruder body. Click when done.";
const char MSG_MARK_FIL_CZ[] PROGMEM = "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem.";
const char MSG_MARK_FIL_IT[] PROGMEM = "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare.";
const char MSG_MARK_FIL_ES[] PROGMEM = "Marque el filamento 100 mm por encima del final del extrusor. Hacer clic una vez terminado.";
const char MSG_MARK_FIL_ES[] PROGMEM = "Marque el filamento 100 mm por encima del final del extrusor. Haz clic una vez terminado.";
const char MSG_MARK_FIL_PL[] PROGMEM = "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem.";
const char MSG_MARK_FIL_DE[] PROGMEM = "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig.";
const char * const MSG_MARK_FIL_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1718,7 +1718,7 @@ const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN[] PROGMEM = "Measuring reference height of calibration point";
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ[] PROGMEM = "Merim referencni vysku kalibracniho bodu";
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_IT[] PROGMEM = "Misurare l'altezza di riferimento del punto di calibrazione";
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_ES[] PROGMEM = "Medir la altura del punto de la calibracion";
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_ES[] PROGMEM = "Midiendo altura del punto de calibracion";
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_PL[] PROGMEM = "Okreslam wysokosc odniesienia punktu kalibracyjnego";
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_DE[] PROGMEM = "Messen der Referenzhoehe des Kalibrierpunktes";
const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1815,7 +1815,7 @@ const char * const MSG_MOVE_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_EN[] PROGMEM = "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ[] PROGMEM = "Kalibrace XYZ. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_IT[] PROGMEM = "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_ES[] PROGMEM = "Calibrando XYZ. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_ES[] PROGMEM = "Calibrando XYZ. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_PL[] PROGMEM = "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_DE[] PROGMEM = "Kalibrieren von XYZ. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken Sie den Knopf wenn es ganz oben wird.";
const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1830,7 +1830,7 @@ const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN[] PROGMEM = "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ[] PROGMEM = "Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_IT[] PROGMEM = "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_ES[] PROGMEM = "Calibrando Z. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_ES[] PROGMEM = "Calibrando Z. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_PL[] PROGMEM = "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic.";
const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE[] PROGMEM = "Kalibrieren von Z. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken Sie den Knopf wenn es ganz oben wird.";
const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -1975,14 +1975,13 @@ const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_NOZZLE_EN[] PROGMEM = "Nozzle";
const char MSG_NOZZLE_CZ[] PROGMEM = "Tryska";
const char MSG_NOZZLE_IT[] PROGMEM = "Ugello";
const char MSG_NOZZLE_ES[] PROGMEM = "Boquilla";
const char MSG_NOZZLE_PL[] PROGMEM = "Dysza";
const char MSG_NOZZLE_DE[] PROGMEM = "Duese";
const char * const MSG_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_NOZZLE_EN,
MSG_NOZZLE_CZ,
MSG_NOZZLE_IT,
MSG_NOZZLE_ES,
MSG_NOZZLE_EN,
MSG_NOZZLE_PL,
MSG_NOZZLE_DE
};
@ -2267,7 +2266,7 @@ const char * const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_PRESS_EN[] PROGMEM = "and press the knob";
const char MSG_PRESS_CZ[] PROGMEM = "a stisknete tlacitko";
const char MSG_PRESS_IT[] PROGMEM = "e cliccare manopola";
const char MSG_PRESS_ES[] PROGMEM = "Pulsar el mando";
const char MSG_PRESS_ES[] PROGMEM = "Haz clic";
const char MSG_PRESS_PL[] PROGMEM = "Nacisnij przycisk";
const char MSG_PRESS_DE[] PROGMEM = "und Knopf druecken";
const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2557,7 +2556,7 @@ const char * const MSG_SD_WRITE_TO_FILE_LANG_TABLE[1] PROGMEM = {
const char MSG_SELFTEST_EN[] PROGMEM = "Selftest ";
const char MSG_SELFTEST_IT[] PROGMEM = "Autotest";
const char MSG_SELFTEST_ES[] PROGMEM = "Autotest";
const char MSG_SELFTEST_ES[] PROGMEM = "Selftest";
const char MSG_SELFTEST_DE[] PROGMEM = "Selbsttest ";
const char * const MSG_SELFTEST_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_EN,
@ -2570,7 +2569,7 @@ const char * const MSG_SELFTEST_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_BEDHEATER_EN[] PROGMEM = "Bed / Heater";
const char MSG_SELFTEST_BEDHEATER_IT[] PROGMEM = "Letto/Riscald.";
const char MSG_SELFTEST_BEDHEATER_ES[] PROGMEM = "Cama/Calentador";
const char MSG_SELFTEST_BEDHEATER_ES[] PROGMEM = "Heatbed";
const char MSG_SELFTEST_BEDHEATER_DE[] PROGMEM = "Bett / Heater";
const char * const MSG_SELFTEST_BEDHEATER_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_BEDHEATER_EN,
@ -2584,7 +2583,7 @@ const char * const MSG_SELFTEST_BEDHEATER_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_CHECK_ALLCORRECT_EN[] PROGMEM = "All correct ";
const char MSG_SELFTEST_CHECK_ALLCORRECT_CZ[] PROGMEM = "Vse OK ";
const char MSG_SELFTEST_CHECK_ALLCORRECT_IT[] PROGMEM = "Nessun errore";
const char MSG_SELFTEST_CHECK_ALLCORRECT_ES[] PROGMEM = "Todo bie ";
const char MSG_SELFTEST_CHECK_ALLCORRECT_ES[] PROGMEM = "Todo bien";
const char MSG_SELFTEST_CHECK_ALLCORRECT_PL[] PROGMEM = "Wszystko OK ";
const char MSG_SELFTEST_CHECK_ALLCORRECT_DE[] PROGMEM = "Alles richtig ";
const char * const MSG_SELFTEST_CHECK_ALLCORRECT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2599,7 +2598,7 @@ const char * const MSG_SELFTEST_CHECK_ALLCORRECT_LANG_TABLE[LANG_NUM] PROGMEM =
const char MSG_SELFTEST_CHECK_BED_EN[] PROGMEM = "Checking bed ";
const char MSG_SELFTEST_CHECK_BED_CZ[] PROGMEM = "Kontrola bed ";
const char MSG_SELFTEST_CHECK_BED_IT[] PROGMEM = "Verifica letto";
const char MSG_SELFTEST_CHECK_BED_ES[] PROGMEM = "Control de cama";
const char MSG_SELFTEST_CHECK_BED_ES[] PROGMEM = "Control heatbed";
const char MSG_SELFTEST_CHECK_BED_PL[] PROGMEM = "Kontrola bed ";
const char MSG_SELFTEST_CHECK_BED_DE[] PROGMEM = "Pruefe Bett ";
const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2614,7 +2613,7 @@ const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_CHECK_ENDSTOPS_EN[] PROGMEM = "Checking endstops";
const char MSG_SELFTEST_CHECK_ENDSTOPS_CZ[] PROGMEM = "Kontrola endstops";
const char MSG_SELFTEST_CHECK_ENDSTOPS_IT[] PROGMEM = "Verifica finecorsa";
const char MSG_SELFTEST_CHECK_ENDSTOPS_ES[] PROGMEM = "Cont. topes final";
const char MSG_SELFTEST_CHECK_ENDSTOPS_ES[] PROGMEM = "Control topes";
const char MSG_SELFTEST_CHECK_ENDSTOPS_PL[] PROGMEM = "Kontrola endstops";
const char MSG_SELFTEST_CHECK_ENDSTOPS_DE[] PROGMEM = "Pruefe Endschalter ";
const char * const MSG_SELFTEST_CHECK_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2644,7 +2643,7 @@ const char * const MSG_SELFTEST_CHECK_HOTEND_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_CHECK_X_EN[] PROGMEM = "Checking X axis ";
const char MSG_SELFTEST_CHECK_X_CZ[] PROGMEM = "Kontrola X axis ";
const char MSG_SELFTEST_CHECK_X_IT[] PROGMEM = "Verifica asse X";
const char MSG_SELFTEST_CHECK_X_ES[] PROGMEM = "Control del eje X";
const char MSG_SELFTEST_CHECK_X_ES[] PROGMEM = "Control tope X";
const char MSG_SELFTEST_CHECK_X_PL[] PROGMEM = "Kontrola X axis ";
const char MSG_SELFTEST_CHECK_X_DE[] PROGMEM = "Pruefe X Achse ";
const char * const MSG_SELFTEST_CHECK_X_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2659,7 +2658,7 @@ const char * const MSG_SELFTEST_CHECK_X_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_CHECK_Y_EN[] PROGMEM = "Checking Y axis ";
const char MSG_SELFTEST_CHECK_Y_CZ[] PROGMEM = "Kontrola Y axis ";
const char MSG_SELFTEST_CHECK_Y_IT[] PROGMEM = "Verifica asse Y";
const char MSG_SELFTEST_CHECK_Y_ES[] PROGMEM = "Control del eje Y";
const char MSG_SELFTEST_CHECK_Y_ES[] PROGMEM = "Control tope Y";
const char MSG_SELFTEST_CHECK_Y_PL[] PROGMEM = "Kontrola Y axis ";
const char MSG_SELFTEST_CHECK_Y_DE[] PROGMEM = "Pruefe Y Achse ";
const char * const MSG_SELFTEST_CHECK_Y_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2674,7 +2673,7 @@ const char * const MSG_SELFTEST_CHECK_Y_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_CHECK_Z_EN[] PROGMEM = "Checking Z axis ";
const char MSG_SELFTEST_CHECK_Z_CZ[] PROGMEM = "Kontrola Z axis ";
const char MSG_SELFTEST_CHECK_Z_IT[] PROGMEM = "Verifica asse Z";
const char MSG_SELFTEST_CHECK_Z_ES[] PROGMEM = "Control del eje Z";
const char MSG_SELFTEST_CHECK_Z_ES[] PROGMEM = "Control tope Z";
const char MSG_SELFTEST_CHECK_Z_PL[] PROGMEM = "Kontrola Z axis ";
const char MSG_SELFTEST_CHECK_Z_DE[] PROGMEM = "Pruefe Z Achse ";
const char * const MSG_SELFTEST_CHECK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2686,11 +2685,11 @@ const char * const MSG_SELFTEST_CHECK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_CHECK_Z_DE
};
const char MSG_SELFTEST_COOLING_FAN_EN[] PROGMEM = "Front print fan?";;
const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";;
const char MSG_SELFTEST_COOLING_FAN_IT[] PROGMEM = "Vent di stampa ant.?";;
const char MSG_SELFTEST_COOLING_FAN_ES[] PROGMEM = "Vent. al frente?";;
const char MSG_SELFTEST_COOLING_FAN_PL[] PROGMEM = "Przodni went. druku?";;
const char MSG_SELFTEST_COOLING_FAN_EN[] PROGMEM = "Front print fan?";
const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";
const char MSG_SELFTEST_COOLING_FAN_IT[] PROGMEM = "Vent di stampa ant.?";
const char MSG_SELFTEST_COOLING_FAN_ES[] PROGMEM = "Vent. frontal?";
const char MSG_SELFTEST_COOLING_FAN_PL[] PROGMEM = "Przedni went. druku?";
const char MSG_SELFTEST_COOLING_FAN_DE[] PROGMEM = "Vorderer Luefter?";
const char * const MSG_SELFTEST_COOLING_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_COOLING_FAN_EN,
@ -2715,7 +2714,7 @@ const char * const MSG_SELFTEST_ENDSTOP_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_ENDSTOPS_EN[] PROGMEM = "Endstops";
const char MSG_SELFTEST_ENDSTOPS_IT[] PROGMEM = "Finecorsa (2)";
const char MSG_SELFTEST_ENDSTOPS_ES[] PROGMEM = "Topes final";
const char MSG_SELFTEST_ENDSTOPS_ES[] PROGMEM = "Topes finales";
const char MSG_SELFTEST_ENDSTOPS_DE[] PROGMEM = "Endschalter";
const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ENDSTOPS_EN,
@ -2728,7 +2727,7 @@ const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_ENDSTOP_NOTHIT_EN[] PROGMEM = "Endstop not hit";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_IT[] PROGMEM = "Finec. fuori por.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_ES[] PROGMEM = "Tope fin. no toc.";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_ES[] PROGMEM = "Tope no alcanzado";
const char MSG_SELFTEST_ENDSTOP_NOTHIT_DE[] PROGMEM = "Ende nicht getrof.";
const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ENDSTOP_NOTHIT_EN,
@ -2752,11 +2751,11 @@ const char * const MSG_SELFTEST_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_ERROR_DE
};
const char MSG_SELFTEST_EXTRUDER_FAN_EN[] PROGMEM = "Left hotend fan?";;
const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";;
const char MSG_SELFTEST_EXTRUDER_FAN_IT[] PROGMEM = "Vent SX sull'ugello?";;
const char MSG_SELFTEST_EXTRUDER_FAN_ES[] PROGMEM = "Vent. en la izg?";;
const char MSG_SELFTEST_EXTRUDER_FAN_PL[] PROGMEM = "Lewy went na dysze?";;
const char MSG_SELFTEST_EXTRUDER_FAN_EN[] PROGMEM = "Left hotend fan?";
const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";
const char MSG_SELFTEST_EXTRUDER_FAN_IT[] PROGMEM = "Vent SX sull'ugello?";
const char MSG_SELFTEST_EXTRUDER_FAN_ES[] PROGMEM = "Vent. izquierdo?";
const char MSG_SELFTEST_EXTRUDER_FAN_PL[] PROGMEM = "Lewy went na dysze?";
const char MSG_SELFTEST_EXTRUDER_FAN_DE[] PROGMEM = "Linker Luefter?";
const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_EXTRUDER_FAN_EN,
@ -2770,7 +2769,7 @@ const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_FAILED_EN[] PROGMEM = "Selftest failed ";
const char MSG_SELFTEST_FAILED_CZ[] PROGMEM = "Selftest selhal ";
const char MSG_SELFTEST_FAILED_IT[] PROGMEM = "Autotest fallito";
const char MSG_SELFTEST_FAILED_ES[] PROGMEM = "Autotest fallado";
const char MSG_SELFTEST_FAILED_ES[] PROGMEM = "Fallo Selftest";
const char MSG_SELFTEST_FAILED_PL[] PROGMEM = "Selftest nieudany";
const char MSG_SELFTEST_FAILED_DE[] PROGMEM = "Selbsttest misslung.";
const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2782,11 +2781,11 @@ const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAILED_DE
};
const char MSG_SELFTEST_FAN_EN[] PROGMEM = "Fan test";;
const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";;
const char MSG_SELFTEST_FAN_IT[] PROGMEM = "Prova del ventilator";;
const char MSG_SELFTEST_FAN_ES[] PROGMEM = "Test del ventilador";;
const char MSG_SELFTEST_FAN_PL[] PROGMEM = "Test wentylatora";;
const char MSG_SELFTEST_FAN_EN[] PROGMEM = "Fan test";
const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";
const char MSG_SELFTEST_FAN_IT[] PROGMEM = "Prova del ventilator";
const char MSG_SELFTEST_FAN_ES[] PROGMEM = "Test ventiladores";
const char MSG_SELFTEST_FAN_PL[] PROGMEM = "Test wentylatora";
const char MSG_SELFTEST_FAN_DE[] PROGMEM = "Lueftertest";
const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_EN,
@ -2797,11 +2796,11 @@ const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_DE
};
const char MSG_SELFTEST_FAN_NO_EN[] PROGMEM = "Not spinning";;
const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";;
const char MSG_SELFTEST_FAN_NO_IT[] PROGMEM = "Non si gira";;
const char MSG_SELFTEST_FAN_NO_ES[] PROGMEM = "Ventilador no gira";;
const char MSG_SELFTEST_FAN_NO_PL[] PROGMEM = "Nekreci sie";;
const char MSG_SELFTEST_FAN_NO_EN[] PROGMEM = "Not spinning";
const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";
const char MSG_SELFTEST_FAN_NO_IT[] PROGMEM = "Non si gira";
const char MSG_SELFTEST_FAN_NO_ES[] PROGMEM = "Ventilador no gira";
const char MSG_SELFTEST_FAN_NO_PL[] PROGMEM = "Nie kreci sie";
const char MSG_SELFTEST_FAN_NO_DE[] PROGMEM = "Dreht nicht";
const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_NO_EN,
@ -2812,11 +2811,11 @@ const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_NO_DE
};
const char MSG_SELFTEST_FAN_YES_EN[] PROGMEM = "Spinning";;
const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";;
const char MSG_SELFTEST_FAN_YES_IT[] PROGMEM = "Gira";;
const char MSG_SELFTEST_FAN_YES_ES[] PROGMEM = "Ventilador gira";;
const char MSG_SELFTEST_FAN_YES_PL[] PROGMEM = "Kreci sie";;
const char MSG_SELFTEST_FAN_YES_EN[] PROGMEM = "Spinning";
const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";
const char MSG_SELFTEST_FAN_YES_IT[] PROGMEM = "Gira";
const char MSG_SELFTEST_FAN_YES_ES[] PROGMEM = "Ventilador gira";
const char MSG_SELFTEST_FAN_YES_PL[] PROGMEM = "Kreci sie";
const char MSG_SELFTEST_FAN_YES_DE[] PROGMEM = "Dreht";
const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_FAN_YES_EN,
@ -2829,7 +2828,7 @@ const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_HEATERTHERMISTOR_EN[] PROGMEM = "Heater/Thermistor";
const char MSG_SELFTEST_HEATERTHERMISTOR_IT[] PROGMEM = "Riscald./Termist.";
const char MSG_SELFTEST_HEATERTHERMISTOR_ES[] PROGMEM = "Calent./Termistor";
const char MSG_SELFTEST_HEATERTHERMISTOR_ES[] PROGMEM = "Hotend";
const char * const MSG_SELFTEST_HEATERTHERMISTOR_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_HEATERTHERMISTOR_EN,
MSG_SELFTEST_HEATERTHERMISTOR_EN,
@ -2895,7 +2894,7 @@ const char * const MSG_SELFTEST_PLEASECHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_SELFTEST_START_EN[] PROGMEM = "Self test start ";
const char MSG_SELFTEST_START_IT[] PROGMEM = "Avvia autotest";
const char MSG_SELFTEST_START_ES[] PROGMEM = "Autotest salida";
const char MSG_SELFTEST_START_ES[] PROGMEM = "Inicio Selftest";
const char MSG_SELFTEST_START_DE[] PROGMEM = "Selbsttest start ";
const char * const MSG_SELFTEST_START_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_SELFTEST_START_EN,
@ -3129,7 +3128,7 @@ const char * const MSG_STACK_ERROR_LANG_TABLE[1] PROGMEM = {
const char MSG_STATISTICS_EN[] PROGMEM = "Statistics ";
const char MSG_STATISTICS_CZ[] PROGMEM = "Statistika ";
const char MSG_STATISTICS_IT[] PROGMEM = "Statistiche";
const char MSG_STATISTICS_ES[] PROGMEM = "Estadistica ";
const char MSG_STATISTICS_ES[] PROGMEM = "Estadisticas ";
const char MSG_STATISTICS_PL[] PROGMEM = "Statystyka ";
const char MSG_STATISTICS_DE[] PROGMEM = "Statistiken ";
const char * const MSG_STATISTICS_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3144,7 +3143,7 @@ const char * const MSG_STATISTICS_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_STATS_FILAMENTUSED_EN[] PROGMEM = "Filament used: ";
const char MSG_STATS_FILAMENTUSED_CZ[] PROGMEM = "Filament : ";
const char MSG_STATS_FILAMENTUSED_IT[] PROGMEM = "Filamento usato:";
const char MSG_STATS_FILAMENTUSED_ES[] PROGMEM = "Filamento : ";
const char MSG_STATS_FILAMENTUSED_ES[] PROGMEM = "Filamento usado: ";
const char MSG_STATS_FILAMENTUSED_PL[] PROGMEM = "Filament : ";
const char MSG_STATS_FILAMENTUSED_DE[] PROGMEM = "Filamentverbrauch:";
const char * const MSG_STATS_FILAMENTUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3326,7 +3325,7 @@ const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_TEMP_CALIBRATION_DONE_EN[] PROGMEM = "Temperature calibration is finished. Click to continue.";
const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka.";
const char MSG_TEMP_CALIBRATION_DONE_IT[] PROGMEM = "Taratura temperatura terminata. Fare click per continuare.";
const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Presionar para continuar.";
const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Haz clic para continuar.";
const char MSG_TEMP_CALIBRATION_DONE_PL[] PROGMEM = "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem";
const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Temp. Kalibrierung fertig. Klicken um weiter zu gehen.";
const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3520,7 +3519,7 @@ const char * const MSG_UNLOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_USB_PRINTING_EN[] PROGMEM = "USB printing ";
const char MSG_USB_PRINTING_CZ[] PROGMEM = "Tisk z USB ";
const char MSG_USB_PRINTING_IT[] PROGMEM = "Stampa da USB";
const char MSG_USB_PRINTING_ES[] PROGMEM = "Impresion de USB ";
const char MSG_USB_PRINTING_ES[] PROGMEM = "Impresion con USB ";
const char MSG_USB_PRINTING_PL[] PROGMEM = "Druk z USB ";
const char MSG_USB_PRINTING_DE[] PROGMEM = "Drucken ueber USB";
const char * const MSG_USB_PRINTING_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3598,7 +3597,7 @@ const char * const MSG_VTRAV_MIN_LANG_TABLE[1] PROGMEM = {
const char MSG_WAITING_TEMP_EN[] PROGMEM = "Waiting for nozzle and bed cooling";
const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podlozky.";
const char MSG_WAITING_TEMP_IT[] PROGMEM = "In attesa del raffreddamento della testina e del piatto";
const char MSG_WAITING_TEMP_ES[] PROGMEM = "Esperando enfriamiento de la cama y del extrusor.";
const char MSG_WAITING_TEMP_ES[] PROGMEM = "Esperando enfriamiento de heatbed y extrusor.";
const char MSG_WAITING_TEMP_PL[] PROGMEM = "Oczekiwanie na wychlodzenie dyszy i podkladki.";
const char MSG_WAITING_TEMP_DE[] PROGMEM = "Warten auf Abkuehlung von Heater und Bett.";
const char * const MSG_WAITING_TEMP_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3653,7 +3652,7 @@ const char * const MSG_WIZARD_CALIBRATION_FAILED_LANG_TABLE[LANG_NUM] PROGMEM =
const char MSG_WIZARD_CLEAN_HEATBED_EN[] PROGMEM = "Please clean heatbed and then press the knob.";
const char MSG_WIZARD_CLEAN_HEATBED_CZ[] PROGMEM = "Prosim ocistete heatbed a stisknete tlacitko.";
const char MSG_WIZARD_CLEAN_HEATBED_IT[] PROGMEM = "Per favore pulisci il piatto, poi premi la manopola.";
const char MSG_WIZARD_CLEAN_HEATBED_ES[] PROGMEM = "Limpia la superficie de la heatbed, por favor, y presiona el mando.";
const char MSG_WIZARD_CLEAN_HEATBED_ES[] PROGMEM = "Limpia la superficie de la heatbed, por favor, y haz clic";
const char MSG_WIZARD_CLEAN_HEATBED_PL[] PROGMEM = "Prosze oczysc stolik i nacisnij guzik.";
const char MSG_WIZARD_CLEAN_HEATBED_DE[] PROGMEM = "Bitte reinigen Sie das Heizbett und druecken Sie dann den Knopf.";
const char * const MSG_WIZARD_CLEAN_HEATBED_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3728,7 +3727,7 @@ const char * const MSG_WIZARD_INSERT_CORRECT_FILAMENT_LANG_TABLE[LANG_NUM] PROGM
const char MSG_WIZARD_LOAD_FILAMENT_EN[] PROGMEM = "Please insert PLA filament to the extruder, then press knob to load it.";
const char MSG_WIZARD_LOAD_FILAMENT_CZ[] PROGMEM = "Prosim vlozte PLA filament do extruderu, po te stisknete tlacitko pro zavedeni filamentu.";
const char MSG_WIZARD_LOAD_FILAMENT_IT[] PROGMEM = "Per favore inserisci il filamento di PLA nell'estrusore, poi premi la manopola per caricare.";
const char MSG_WIZARD_LOAD_FILAMENT_ES[] PROGMEM = "Inserta, por favor, filamento PLA en el extrusor. Despues, presiona el mando para cargarlo.";
const char MSG_WIZARD_LOAD_FILAMENT_ES[] PROGMEM = "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo.";
const char MSG_WIZARD_LOAD_FILAMENT_PL[] PROGMEM = "Prosze umiesc filament PLA w ekstruderze i nacisnij przycisk by zaladowac.";
const char MSG_WIZARD_LOAD_FILAMENT_DE[] PROGMEM = "Fuehren Sie bitte PLA Filament in den Extruder und bestaetigen Sie den Knopf um es zu laden.";
const char * const MSG_WIZARD_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3743,7 +3742,7 @@ const char * const MSG_WIZARD_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
const char MSG_WIZARD_PLA_FILAMENT_EN[] PROGMEM = "Is it PLA filament?";
const char MSG_WIZARD_PLA_FILAMENT_CZ[] PROGMEM = "Je to PLA filament?";
const char MSG_WIZARD_PLA_FILAMENT_IT[] PROGMEM = "E questo un filamento di PLA?";
const char MSG_WIZARD_PLA_FILAMENT_ES[] PROGMEM = "Es este un filamento PLA?";
const char MSG_WIZARD_PLA_FILAMENT_ES[] PROGMEM = "Es el filamento PLA?";
const char MSG_WIZARD_PLA_FILAMENT_PL[] PROGMEM = "Czy to filament PLA?";
const char MSG_WIZARD_PLA_FILAMENT_DE[] PROGMEM = "Ist es wirklich PLA Filament?";
const char * const MSG_WIZARD_PLA_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -3849,7 +3848,7 @@ const char MSG_WIZARD_WELCOME_EN[] PROGMEM = "Hi, I am your Original Prusa i3 pr
const char MSG_WIZARD_WELCOME_CZ[] PROGMEM = "Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?";
const char MSG_WIZARD_WELCOME_IT[] PROGMEM = "Ciao, sono la tua stampante Original Prusa i3. Gradiresti aiuto attraverso il processo di configurazione?";
const char MSG_WIZARD_WELCOME_ES[] PROGMEM = "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?";
const char MSG_WIZARD_WELCOME_PL[] PROGMEM = "Czesc, jestem Twoja Original Prusa i3. Czy mam pomoc Ci z instalacja?";
const char MSG_WIZARD_WELCOME_PL[] PROGMEM = "Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z instalacja?";
const char MSG_WIZARD_WELCOME_DE[] PROGMEM = "Hallo, ich bin dein Original Prusa i3 Drucker. Moechten Sie meine Hilfe durch den Setup-Prozess?";
const char * const MSG_WIZARD_WELCOME_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_WIZARD_WELCOME_EN,

10
Firmware/language_cz.h
View File

@ -182,11 +182,11 @@
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
#define MSG_SELFTEST_OK "Self test OK"
#define(length=20) MSG_SELFTEST_FAN "Test ventilatoru";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Predni tiskovy vent?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Levy vent na trysce?";
#define MSG_SELFTEST_FAN_YES "Toci se";
#define MSG_SELFTEST_FAN_NO "Netoci se";
#define MSG_SELFTEST_FAN "Test ventilatoru"
#define MSG_SELFTEST_COOLING_FAN "Predni tiskovy vent?"
#define MSG_SELFTEST_EXTRUDER_FAN "Levy vent na trysce?"
#define MSG_SELFTEST_FAN_YES "Toci se"
#define MSG_SELFTEST_FAN_NO "Netoci se"
#define MSG_STATS_TOTALFILAMENT "Filament celkem :"
#define MSG_STATS_TOTALPRINTTIME "Celkovy cas :"

10
Firmware/language_en.h
View File

@ -178,11 +178,11 @@
#define MSG_SELFTEST_OK "Self test OK"
#define(length=20,lines=1) MSG_LOOSE_PULLEY "Loose pulley"
#define(length=20) MSG_SELFTEST_FAN "Fan test";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?";
#define MSG_SELFTEST_FAN_YES "Spinning";
#define MSG_SELFTEST_FAN_NO "Not spinning";
#define(length=20) MSG_SELFTEST_FAN "Fan test"
#define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?"
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?"
#define(length=19) MSG_SELFTEST_FAN_YES "Spinning"
#define(length=19) MSG_SELFTEST_FAN_NO "Not spinning"
#define(length=20) MSG_STATS_TOTALFILAMENT "Total filament :"
#define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :"

116
Firmware/language_es.h
View File

@ -19,8 +19,8 @@
#define MSG_MOVE_Z "Mover Z"
#define MSG_MOVE_E "Extruir"
#define MSG_SPEED "Velocidad"
#define MSG_NOZZLE "Boquilla"
#define MSG_BED "Base"
#define MSG_NOZZLE "Nozzle"
#define MSG_BED "Heatbed"
#define MSG_FAN_SPEED "Velocidad Vent."
#define MSG_FLOW "Flujo"
#define MSG_TEMPERATURE "Temperatura"
@ -59,7 +59,7 @@
#define MSG_PLEASE_WAIT "Por Favor Esperar"
#define MSG_LOADING_COLOR "Cambiando color"
#define MSG_CHANGE_SUCCESS "Cambio correcto"
#define MSG_PRESS "Pulsar el mando"
#define MSG_PRESS "Haz clic"
#define MSG_INSERT_FILAMENT "Introducir filamento"
#define MSG_CHANGING_FILAMENT "Cambiando filamento"
#define MSG_SILENT_MODE_ON "Modo [silencio]"
@ -158,79 +158,79 @@
#define MSG_SELFTEST_ERROR "Autotest error!"
#define MSG_SELFTEST_PLEASECHECK "Controla :"
#define MSG_SELFTEST_NOTCONNECTED "No hay conexion "
#define MSG_SELFTEST_HEATERTHERMISTOR "Calent./Termistor"
#define MSG_SELFTEST_BEDHEATER "Cama/Calentador"
#define MSG_SELFTEST_HEATERTHERMISTOR "Hotend"
#define MSG_SELFTEST_BEDHEATER "Heatbed"
#define MSG_SELFTEST_WIRINGERROR "Error de conexion"
#define MSG_SELFTEST_ENDSTOPS "Topes final"
#define MSG_SELFTEST_ENDSTOPS "Topes finales"
#define MSG_SELFTEST_MOTOR "Motor"
#define MSG_SELFTEST_ENDSTOP "Tope final"
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Tope fin. no toc."
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Tope no alcanzado"
#define MSG_SELFTEST_OK "Self test OK"
#define(length=20) MSG_SELFTEST_FAN "Test del ventilador";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Vent. al frente?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Vent. en la izg?";
#define MSG_SELFTEST_FAN_YES "Ventilador gira";
#define MSG_SELFTEST_FAN_NO "Ventilador no gira";
#define MSG_SELFTEST_FAN "Test ventiladores"
#define MSG_SELFTEST_COOLING_FAN "Vent. frontal?"
#define MSG_SELFTEST_EXTRUDER_FAN "Vent. izquierdo?"
#define MSG_SELFTEST_FAN_YES "Ventilador gira"
#define MSG_SELFTEST_FAN_NO "Ventilador no gira"
#define MSG_STATS_TOTALFILAMENT "Filamento total:"
#define MSG_STATS_TOTALPRINTTIME "Tiempo total :"
#define MSG_STATS_FILAMENTUSED "Filamento : "
#define MSG_STATS_FILAMENTUSED "Filamento usado: "
#define MSG_STATS_PRINTTIME "Tiempo de imp.:"
#define MSG_SELFTEST_START "Autotest salida"
#define MSG_SELFTEST_CHECK_ENDSTOPS "Cont. topes final"
#define MSG_SELFTEST_START "Inicio Selftest"
#define MSG_SELFTEST_CHECK_ENDSTOPS "Control topes"
#define MSG_SELFTEST_CHECK_HOTEND "Control hotend "
#define MSG_SELFTEST_CHECK_X "Control del eje X"
#define MSG_SELFTEST_CHECK_Y "Control del eje Y"
#define MSG_SELFTEST_CHECK_Z "Control del eje Z"
#define MSG_SELFTEST_CHECK_BED "Control de cama"
#define MSG_SELFTEST_CHECK_ALLCORRECT "Todo bie "
#define MSG_SELFTEST "Autotest"
#define MSG_SELFTEST_FAILED "Autotest fallado"
#define MSG_SELFTEST_CHECK_X "Control tope X"
#define MSG_SELFTEST_CHECK_Y "Control tope Y"
#define MSG_SELFTEST_CHECK_Z "Control tope Z"
#define MSG_SELFTEST_CHECK_BED "Control heatbed"
#define MSG_SELFTEST_CHECK_ALLCORRECT "Todo bien"
#define MSG_SELFTEST "Selftest"
#define MSG_SELFTEST_FAILED "Fallo Selftest"
#define MSG_STATISTICS "Estadistica "
#define MSG_USB_PRINTING "Impresion de USB "
#define MSG_STATISTICS "Estadisticas "
#define MSG_USB_PRINTING "Impresion con USB "
#define MSG_SHOW_END_STOPS "Ensena tope final"
#define MSG_CALIBRATE_BED "Calibra XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrando XYZ. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrando Z. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrando XYZ. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrando Z. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
#define MSG_CONFIRM_NOZZLE_CLEAN "Limpiar boquilla para calibracion. Click cuando acabes."
#define MSG_CONFIRM_NOZZLE_CLEAN "Limpia nozzle para calibracion. Click cuando acabes."
#define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Carros Z izq./der. estan arriba maximo?"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Buscando cama punto de calibracion"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Buscando punto de calibracion heatbed"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " de 4"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Mejorando cama punto de calibracion"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Mejorando punto de calibracion heatbed"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " de 9"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Medir la altura del punto de la calibracion"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Midiendo altura del punto de calibracion"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " de 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiteracion "
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados."
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibracion XYZ fallada. Consultar el manual por favor."
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibracion XYZ ok. Ejes X/Y perpendiculares. Felicitaciones!"
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibracion XYZ fallada. Puntos de calibracion en heatbed no encontrados."
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibracion XYZ fallada. Consulta el manual por favor."
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibracion XYZ fallad. Punto delantero izquierdo no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibracion XYZ fallad. Punto delantero derecho no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibracion XYZ fallad. Punto delanteros no alcanzables."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazion XYZ comprometida. Punto delantero izquierdo no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazion XYZ comprometida. Punto delantero derecho no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazion XYZ comprometida. Punto delanteros no alcanzables."
#define MSG_BED_LEVELING_FAILED_POINT_LOW "Nivelacion fallada. Sensor no funciona. Escombros en Boqui.? Esperando reset."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibracion XYZ fallada. Punto frontal izquierdo no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibracion XYZ fallada. Puntos frontales no alcanzables."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazion XYZ comprometida. Punto frontal izquierdo no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."
#define MSG_BED_LEVELING_FAILED_POINT_LOW "Nivelacion fallada. Sensor no funciona. Escombros en nozzle? Esperando reset."
#define MSG_BED_LEVELING_FAILED_POINT_HIGH "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset."
#define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset."
#define MSG_NEW_FIRMWARE_AVAILABLE "Nuevo firmware disponible:"
#define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Actualizar por favor"
#define MSG_FOLLOW_CALIBRATION_FLOW "Impresora no esta calibrada todavia. Por favor usar el manual, el capitulo First steps, seleccion Calibration flow."
#define MSG_BABYSTEP_Z_NOT_SET "Distancia entre la punta de la boquilla y la superficie de la cama no fijada aun. Por favor siga el manual, capitulo First steps, seccion First layer calibration."
#define MSG_FOLLOW_CALIBRATION_FLOW "Impresora no esta calibrada todavia. Por favor usa el manual, capitulo First steps, Calibration flow."
#define MSG_BABYSTEP_Z_NOT_SET "Distancia entre la punta del nozzle y la superficie de la heatbed aun no fijada. Por favor siga el manual, capitulo First steps, First layer calibration."
#define MSG_BED_CORRECTION_MENU "Corr. de la cama"
#define MSG_BED_CORRECTION_LEFT "Izquierda [um]"
#define MSG_BED_CORRECTION_RIGHT "Derecha [um]"
#define MSG_BED_CORRECTION_FRONT "Adelante [um]"
#define MSG_BED_CORRECTION_REAR "Atras [um]"
#define MSG_BED_CORRECTION_FRONT "Frontal [um]"
#define MSG_BED_CORRECTION_REAR "Trasera [um]"
#define MSG_BED_CORRECTION_RESET "Reset"
#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
@ -239,19 +239,19 @@
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
#define MSG_LOOSE_PULLEY "Polea suelta"
#define MSG_FILAMENT_LOADING_T0 "Insertar filamento en el extrusor 1. Haga clic una vez terminado."
#define MSG_FILAMENT_LOADING_T1 "Insertar filamento en el extrusor 2. Haga clic una vez terminado."
#define MSG_FILAMENT_LOADING_T2 "Insertar filamento en el extrusor 3. Haga clic una vez terminado."
#define MSG_FILAMENT_LOADING_T3 "Insertar filamento en el extrusor 4. Haga clic una vez terminado."
#define MSG_FILAMENT_LOADING_T0 "Insertar filamento en el extrusor 1. Haz clic una vez terminado."
#define MSG_FILAMENT_LOADING_T1 "Insertar filamento en el extrusor 2. Haz clic una vez terminado."
#define MSG_FILAMENT_LOADING_T2 "Insertar filamento en el extrusor 3. Haz clic una vez terminado."
#define MSG_FILAMENT_LOADING_T3 "Insertar filamento en el extrusor 4. Haz clic una vez terminado."
#define MSG_CHANGE_EXTR "Cambiar extrusor."
#define MSG_FIL_ADJUSTING "Ajustando filamentos. Esperar por favor."
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado."
#define MSG_FIL_ADJUSTING "Ajustando filamentos. Espera por favor."
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamentos ajustados. Limpia nozzle para calibracion. Haz clic una vez terminado."
#define MSG_CALIBRATE_E "Calibrar E"
#define MSG_E_CAL_KNOB "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haga clic una vez terminado."
#define MSG_MARK_FIL "Marque el filamento 100 mm por encima del final del extrusor. Hacer clic una vez terminado."
#define MSG_CLEAN_NOZZLE_E "E calibrado. Limpiar la boquilla. Haga clic una vez terminado."
#define MSG_WAITING_TEMP "Esperando enfriamiento de la cama y del extrusor."
#define MSG_E_CAL_KNOB "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haz clic una vez terminado."
#define MSG_MARK_FIL "Marque el filamento 100 mm por encima del final del extrusor. Haz clic una vez terminado."
#define MSG_CLEAN_NOZZLE_E "E calibrado. Limpia nozzle. Haz clic una vez terminado."
#define MSG_WAITING_TEMP "Esperando enfriamiento de heatbed y extrusor."
#define MSG_FILAMENT_CLEAN "Es el nuevo color nitido?"
#define MSG_UNLOADING_FILAMENT "Soltando filamento"
#define MSG_PAPER "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
@ -269,7 +269,7 @@
#define MSG_PINDA_NOT_CALIBRATED "La temperatura de calibracion no ha sido ajustada"
#define MSG_PINDA_PREHEAT "Calentando PINDA"
#define MSG_TEMP_CALIBRATION "Cal. temp. "
#define MSG_TEMP_CALIBRATION_DONE "Calibracon temperatura terminada. Presionar para continuar."
#define MSG_TEMP_CALIBRATION_DONE "Calibracon temperatura terminada. Haz clic para continuar."
#define MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
@ -325,11 +325,11 @@
#define MSG_WIZARD_V2_CAL_2 "Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el mando, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual."
#define MSG_V2_CALIBRATION "Cal. primera cap."
#define MSG_WIZARD_DONE "Terminado! Feliz impresion!"
#define MSG_WIZARD_LOAD_FILAMENT "Inserta, por favor, filamento PLA en el extrusor. Despues, presiona el mando para cargarlo."
#define MSG_WIZARD_LOAD_FILAMENT "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo."
#define MSG_WIZARD_RERUN "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"
#define MSG_WIZARD_REPEAT_V2_CAL "Quieres repetir el ultimo paso para reajustar la distancia nozzle-heatbed?"
#define MSG_WIZARD_CLEAN_HEATBED "Limpia la superficie de la heatbed, por favor, y presiona el mando."
#define MSG_WIZARD_PLA_FILAMENT "Es este un filamento PLA?"
#define MSG_WIZARD_CLEAN_HEATBED "Limpia la superficie de la heatbed, por favor, y haz clic"
#define MSG_WIZARD_PLA_FILAMENT "Es el filamento PLA?"
#define MSG_WIZARD_INSERT_CORRECT_FILAMENT "Carga filamento PLA, por favor, y reinicia la impresora para continuar con el Wizard"
#define MSG_PLA_FILAMENT_LOADED "Esta el filamento PLA cargado?"
#define MSG_PLEASE_LOAD_PLA "Carga el filamento PLA primero por favor."

10
Firmware/language_it.h
View File

@ -153,11 +153,11 @@
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Finec. fuori por."
#define MSG_SELFTEST_OK "Autotest OK"
#define(length=20) MSG_SELFTEST_FAN "Prova del ventilator";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Vent di stampa ant.?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Vent SX sull'ugello?";
#define MSG_SELFTEST_FAN_YES "Gira";
#define MSG_SELFTEST_FAN_NO "Non si gira";
#define MSG_SELFTEST_FAN "Prova del ventilator"
#define MSG_SELFTEST_COOLING_FAN "Vent di stampa ant.?"
#define MSG_SELFTEST_EXTRUDER_FAN "Vent SX sull'ugello?"
#define MSG_SELFTEST_FAN_YES "Gira"
#define MSG_SELFTEST_FAN_NO "Non si gira"
#define MSG_STATS_TOTALFILAMENT "Filamento tot:"
#define MSG_STATS_TOTALPRINTTIME "Tempo stampa tot:"

12
Firmware/language_pl.h
View File

@ -173,11 +173,11 @@
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
#define MSG_SELFTEST_OK "Self test OK"
#define(length=20) MSG_SELFTEST_FAN "Test wentylatora";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Przodni went. druku?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Lewy went na dysze?";
#define MSG_SELFTEST_FAN_YES "Kreci sie";
#define MSG_SELFTEST_FAN_NO "Nekreci sie";
#define MSG_SELFTEST_FAN "Test wentylatora"
#define MSG_SELFTEST_COOLING_FAN "Przedni went. druku?"
#define MSG_SELFTEST_EXTRUDER_FAN "Lewy went na dysze?"
#define MSG_SELFTEST_FAN_YES "Kreci sie"
#define MSG_SELFTEST_FAN_NO "Nie kreci sie"
#define MSG_STATS_TOTALFILAMENT "Filament lacznie :"
#define MSG_STATS_TOTALPRINTTIME "Czas calkowity :"
@ -316,7 +316,7 @@
#define MSG_DEFAULT_SETTINGS_LOADED "Ustawienia domyœlne"
#define MSG_SORTING "Sortowanie plikow"
#define MSG_FILE_INCOMPLETE "Plik niekompletny. Kontynuowac?"
#define MSG_WIZARD_WELCOME "Czesc, jestem Twoja Original Prusa i3. Czy mam pomoc Ci z instalacja?"
#define MSG_WIZARD_WELCOME "Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z instalacja?"
#define MSG_WIZARD_QUIT "Zawsze mozesz przywrocic Wizard przez Kalibracja -> Wizard."
#define MSG_WIZARD_SELFTEST "Najpierw wlacze autotest w celu kontrolli najczestszych problemow z montazem."
#define MSG_WIZARD_CALIBRATION_FAILED "Prosze sprawdz nasz poradnik i napraw problem. Potem przywroc Wizard restartujac drukarke."

2
Firmware/ultralcd.cpp
View File

@ -2328,7 +2328,7 @@ calibrated:
}else{
lcd_show_fullscreen_message_and_wait_P(MSG_PAPER);
lcd_display_message_fullscreen_P(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1);
lcd_implementation_print_at(0, 2, 1);
lcd_implementation_print_at(0, 3, 1);
lcd_printPGM(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2);
}