From d59dfc7bc7fd1baef251d9b6ea8701184ed9c025 Mon Sep 17 00:00:00 2001
From: 3d-gussner <3d.gussner@gmail.com>
Date: Thu, 15 Dec 2022 14:04:09 +0100
Subject: [PATCH] Remove unused community translations

---
 lang/po/Firmware_da.po | 2037 ----------------------------------------
 lang/po/Firmware_lb.po | 2037 ----------------------------------------
 lang/po/Firmware_lt.po | 2037 ----------------------------------------
 lang/po/Firmware_sl.po | 2037 ----------------------------------------
 4 files changed, 8148 deletions(-)
 delete mode 100644 lang/po/Firmware_da.po
 delete mode 100644 lang/po/Firmware_lb.po
 delete mode 100644 lang/po/Firmware_lt.po
 delete mode 100644 lang/po/Firmware_sl.po

diff --git a/lang/po/Firmware_da.po b/lang/po/Firmware_da.po
deleted file mode 100644
index ed0982fd8..000000000
--- a/lang/po/Firmware_da.po
+++ /dev/null
@@ -1,2037 +0,0 @@
-# Translation of Prusa-Firmware into Danish.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:26:56 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:26:56 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: da\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7066
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1987
-#: ../../Firmware/ultralcd.cpp:3854
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2689
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7343
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4190
-#: ../../Firmware/ultralcd.cpp:4199
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4423
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4327
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1424
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:3002
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4478
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5886
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3271 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4919
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:5801
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5594
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3568
-msgid ""
-"Autoloading filament available only when filament sensor is turned on..."
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2320
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7045
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7044
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2770
-#: ../../Firmware/ultralcd.cpp:5883 ../../Firmware/ultralcd.cpp:7878
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2051 ../../Firmware/Marlin_main.cpp:4767
-#: ../../Firmware/Marlin_main.cpp:4819 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1422 ../../Firmware/ultralcd.cpp:5743
-#: ../../Firmware/ultralcd.cpp:5913
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6260 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:575
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6298 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:578
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4931
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2214 ../../Firmware/Marlin_main.cpp:2993
-#: ../../Firmware/Marlin_main.cpp:3003
-#: ../../Firmware/mesh_bed_calibration.cpp:2862
-#: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1477
-#: ../../Firmware/ultralcd.cpp:1745
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4921
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1607 ../../Firmware/Marlin_main.cpp:1629
-#: ../../Firmware/messages.cpp:77
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5886
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5811
-msgid "Brightness"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4925
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4927
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2965
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2170 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:623
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2964
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7345
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5603
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:635
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7752
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5560
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5519
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2182
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2234
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6208
-#: ../../Firmware/ultralcd.cpp:7335
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6217
-#: ../../Firmware/ultralcd.cpp:7336
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7337
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7338
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7334
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7433
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7340
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7341
-#: ../../Firmware/ultralcd.cpp:7342
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4784
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2237
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3744
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4723
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2144
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3682
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1281 ../../Firmware/ultralcd.cpp:1291
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4363
-#: ../../Firmware/ultralcd.cpp:5787 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5793
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5197
-#: ../../Firmware/ultralcd.cpp:5589
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4322
-#: ../../Firmware/ultralcd.cpp:4327 ../../Firmware/ultralcd.cpp:4332
-msgid "Cutter"
-msgstr ""
-
-#. MSG_MMU_CUTTING_FIL c=18
-#: ../../Firmware/mmu.cpp:1048
-msgid "Cutting filament"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1687
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5886
-msgid "Dim"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4821
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/Marlin_main.cpp:3411
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4164
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4233
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2298
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_FSENS_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3581
-msgid "ERROR: Filament sensor is not responding, please check connection."
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5178
-#: ../../Firmware/ultralcd.cpp:5587
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_EJECTING_FILAMENT c=20
-#: ../../Firmware/mmu.cpp:1076
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:7015
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:7020
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7006
-msgid "Endstops"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3514
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1741
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4248
-#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4267
-#: ../../Firmware/ultralcd.cpp:4269
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4723
-#: ../../Firmware/ultralcd.cpp:4726
-msgid "FS Action"
-msgstr ""
-
-#. MSG_FS_V_03_OR_OLDER c=18
-#: ../../Firmware/Marlin_main.cpp:9485
-msgid "FS v0.3 or older"
-msgstr ""
-
-#. MSG_FS_V_04_OR_NEWER c=18
-#: ../../Firmware/Marlin_main.cpp:9477
-msgid "FS v0.4 or newer"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5611
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5614
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7061
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5745
-#: ../../Firmware/ultralcd.cpp:5915
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7173
-#: ../../Firmware/ultralcd.cpp:7331 ../../Firmware/ultralcd.cpp:7332
-#: ../../Firmware/ultralcd.cpp:7333
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:5778
-msgid "Fans check"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1280 ../../Firmware/ultralcd.cpp:1346
-#: ../../Firmware/ultralcd.cpp:1348
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3470
-#: ../../Firmware/ultralcd.cpp:4247 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4263 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5767
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3854
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2306
-#: ../../Firmware/ultralcd.cpp:2312
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2236
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7056
-#: ../../Firmware/ultralcd.cpp:7060 ../../Firmware/ultralcd.cpp:7064
-#: ../../Firmware/ultralcd.cpp:7360
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2384
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7491
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5336
-#: ../../Firmware/ultralcd.cpp:5652
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4917
-#: ../../Firmware/ultralcd.cpp:5446
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4085
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_MMU_FIX_ISSUE c=20 r=4
-#: ../../Firmware/mmu.cpp:728
-msgid "Fix the issue and then press button on MMU unit."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5746
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7026
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7050
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:418
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:424
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
-#: ../../Firmware/util.cpp:471
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
-#: ../../Firmware/util.cpp:477
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:385
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:391
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4674
-#: ../../Firmware/ultralcd.cpp:4677 ../../Firmware/ultralcd.cpp:4680
-#: ../../Firmware/ultralcd.cpp:4683
-msgid "Gcode"
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4691
-#: ../../Firmware/ultralcd.cpp:4745 ../../Firmware/ultralcd.cpp:4837
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6998
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6203 ../../Firmware/messages.cpp:46
-#: ../../Firmware/ultralcd.cpp:567
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9398
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6234 ../../Firmware/messages.cpp:47
-#: ../../Firmware/ultralcd.cpp:570
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4061
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4064
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Hej, jeg er din originale Prusa i3 -printer. Vil du have mig til at guide "
-"dig gennem installationsprocessen?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5802
-msgid "High power"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7351
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4094
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4102
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4172
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2531
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5500
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5567
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2171
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6253
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3874
-#: ../../Firmware/ultralcd.cpp:4127 ../../Firmware/ultralcd.cpp:4130
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/Marlin_main.cpp:4886
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4103
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1315
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1188
-#: ../../Firmware/ultralcd.cpp:1278 ../../Firmware/ultralcd.cpp:1288
-#: ../../Firmware/ultralcd.cpp:1345
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2515
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7032
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5884
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5885
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4845
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4857
-#: ../../Firmware/ultralcd.cpp:5515
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/ultralcd.cpp:5142
-msgid "Load all"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5144
-#: ../../Firmware/ultralcd.cpp:5155 ../../Firmware/ultralcd.cpp:5584
-#: ../../Firmware/ultralcd.cpp:5598
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5585
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2204
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3641 ../../Firmware/messages.cpp:55
-#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
-#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
-#: ../../Firmware/ultralcd.cpp:2215 ../../Firmware/ultralcd.cpp:3968
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7038
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4481
-msgid "Loud"
-msgstr ""
-
-#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:881
-msgid "MK3 firmware detected on MK3S printer"
-msgstr ""
-
-#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:874
-msgid "MK3S firmware detected on MK3 printer"
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4400
-#: ../../Firmware/ultralcd.cpp:4401
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
-#: ../../Firmware/mmu.cpp:763
-msgid "MMU OK. Resuming position..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
-#: ../../Firmware/mmu.cpp:756
-msgid "MMU OK. Resuming temperature..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING c=20 r=4
-#: ../../Firmware/mmu.cpp:774
-msgid "MMU OK. Resuming..."
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1189
-#: ../../Firmware/ultralcd.cpp:1212
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILED c=20
-#: ../../Firmware/mmu.cpp:1248
-msgid "MMU load failed"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1190
-#: ../../Firmware/ultralcd.cpp:1213
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_MMU_USER_ATTENTION c=20 r=3
-#: ../../Firmware/mmu.cpp:723
-msgid "MMU needs user attention."
-msgstr ""
-
-#. MSG_MMU_POWER_FAILS c=15
-#: ../../Firmware/ultralcd.cpp:1214
-msgid "MMU power fails"
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1699
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5858
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1314 ../../Firmware/ultralcd.cpp:1357
-#: ../../Firmware/ultralcd.cpp:1664 ../../Firmware/ultralcd.cpp:4814
-#: ../../Firmware/ultralcd.cpp:4911 ../../Firmware/ultralcd.cpp:5141
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5176
-#: ../../Firmware/ultralcd.cpp:5195 ../../Firmware/ultralcd.cpp:5739
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3293
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5854
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4842
-#: ../../Firmware/ultralcd.cpp:4929
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4357 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5785
-#: ../../Firmware/ultralcd.cpp:5792 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5800 ../../Firmware/ultralcd.cpp:5801
-#: ../../Firmware/ultralcd.cpp:5802 ../../Firmware/ultralcd.cpp:5886
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3617
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4594
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4600
-#: ../../Firmware/ultralcd.cpp:4603
-msgid "Model"
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7012
-#: ../../Firmware/ultralcd.cpp:7021 ../../Firmware/ultralcd.cpp:7039
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3511
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3512
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3513
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4820
-msgid "Move axis"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
-#: ../../Firmware/ultralcd.cpp:2521 ../../Firmware/ultralcd.cpp:2566
-#: ../../Firmware/ultralcd.cpp:3430 ../../Firmware/ultralcd.cpp:4247
-#: ../../Firmware/ultralcd.cpp:4295 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5858
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2823
-#: ../../Firmware/ultralcd.cpp:3199 ../../Firmware/ultralcd.cpp:4804
-#: ../../Firmware/ultralcd.cpp:6018
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5377
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4424
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:4594 ../../Firmware/ultralcd.cpp:4603
-#: ../../Firmware/ultralcd.cpp:4633 ../../Firmware/ultralcd.cpp:4642
-#: ../../Firmware/ultralcd.cpp:4674 ../../Firmware/ultralcd.cpp:4683
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4400 ../../Firmware/ultralcd.cpp:4416
-#: ../../Firmware/ultralcd.cpp:4435 ../../Firmware/ultralcd.cpp:5785
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6999
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7198
-#: ../../Firmware/ultralcd.cpp:7213 ../../Firmware/ultralcd.cpp:7221
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3981
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4110
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4101
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1421
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4518 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5904
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4565
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4269
-#: ../../Firmware/ultralcd.cpp:4303 ../../Firmware/ultralcd.cpp:4332
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4853
-#: ../../Firmware/ultralcd.cpp:5666 ../../Firmware/ultralcd.cpp:5763
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1535
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4263
-#: ../../Firmware/ultralcd.cpp:4267 ../../Firmware/ultralcd.cpp:4299
-#: ../../Firmware/ultralcd.cpp:4322 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4849
-#: ../../Firmware/ultralcd.cpp:4853 ../../Firmware/ultralcd.cpp:5767
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5787
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4472
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9718 ../../Firmware/messages.cpp:164
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1017
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1022
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4932
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:657
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4932 ../../Firmware/Marlin_main.cpp:5035
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:654
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4939
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3380
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5112 ../../Firmware/messages.cpp:110
-#: ../../Firmware/ultralcd.cpp:3374
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4726
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5529
-#: ../../Firmware/ultralcd.cpp:5531
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3315 ../../Firmware/messages.cpp:68
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4195
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6280
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6993
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4167
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3291 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3964
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3959
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3882
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3551
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
-#: ../../Firmware/ultralcd.cpp:4104
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11580 ../../Firmware/Marlin_main.cpp:11633
-#: ../../Firmware/messages.cpp:74
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5235
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_EJECT_REMOVE c=20 r=4
-#: ../../Firmware/mmu.cpp:1082
-msgid "Please remove filament and then press the knob."
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4100
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3313 ../../Firmware/Marlin_main.cpp:4896
-#: ../../Firmware/messages.cpp:79
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4872
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_UPDATE_MMU2_FW c=20 r=4
-#: ../../Firmware/mmu.cpp:1002
-msgid "Please update firmware in your MMU2. Waiting for reset."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3547 ../../Firmware/Marlin_main.cpp:3563
-#: ../../Firmware/Marlin_main.cpp:7931 ../../Firmware/messages.cpp:71
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:2216
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1279 ../../Firmware/ultralcd.cpp:1289
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5524
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2299
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2919
-#: ../../Firmware/ultralcd.cpp:3943 ../../Firmware/ultralcd.cpp:3945
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2007
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:2004
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1995
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:2000
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1828
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11611
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
-#: ../../Firmware/mmu.cpp:727
-msgid "Press the knob to resume nozzle temperature."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:852
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7354
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5557
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:866
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2385
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1730
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:299
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:305
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4853
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10954
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/mmu.cpp:831
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5448
-msgid "Rename"
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2775
-#: ../../Firmware/ultralcd.cpp:5449
-msgid "Reset"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4936
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
-#: ../../Firmware/ultralcd.cpp:5543 ../../Firmware/ultralcd.cpp:5545
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:665
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2516
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3903
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_RUNOUTS c=7
-#: ../../Firmware/ultralcd.cpp:1290
-msgid "Runouts"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4414
-#: ../../Firmware/ultralcd.cpp:4416 ../../Firmware/ultralcd.cpp:4433
-#: ../../Firmware/ultralcd.cpp:4435
-msgid "SD card"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9747 ../../Firmware/messages.cpp:108
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3297 ../../Firmware/Marlin_main.cpp:3317
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5441
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3985
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:50
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3853
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3698
-#: ../../Firmware/ultralcd.cpp:4860
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4141
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3990
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6552
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6320
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4923
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6992
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6556
-#: ../../Firmware/ultralcd.cpp:7079 ../../Firmware/ultralcd.cpp:7344
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1567
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1742
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6284
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2792
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3510
-#: ../../Firmware/ultralcd.cpp:3715 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:5602 ../../Firmware/ultralcd.cpp:5849
-#: ../../Firmware/ultralcd.cpp:5902
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2559
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:60
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3843
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4934
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4380
-#: ../../Firmware/ultralcd.cpp:4475 ../../Firmware/ultralcd.cpp:5800
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2558
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3060
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4422
-#: ../../Firmware/ultralcd.cpp:4423 ../../Firmware/ultralcd.cpp:4424
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:96
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4472 ../../Firmware/ultralcd.cpp:4475
-#: ../../Firmware/ultralcd.cpp:4478 ../../Firmware/ultralcd.cpp:4481
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5740
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7196
-#: ../../Firmware/ultralcd.cpp:7211 ../../Firmware/ultralcd.cpp:7219
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4885
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5607
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4357
-#: ../../Firmware/ultralcd.cpp:4401 ../../Firmware/ultralcd.cpp:5792
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5438
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5550
-#: ../../Firmware/ultralcd.cpp:6017
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4518
-#: ../../Firmware/ultralcd.cpp:4600 ../../Firmware/ultralcd.cpp:4639
-#: ../../Firmware/ultralcd.cpp:4680
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5616
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7051
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4816
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1748
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3993
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1561 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4422
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5887
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1168
-#: ../../Firmware/ultralcd.cpp:1316
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1211
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1347
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2406
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2407
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5522
-msgid "Tune"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5586
-#: ../../Firmware/ultralcd.cpp:5600
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
-#: ../../Firmware/ultralcd.cpp:5219
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6288
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1751
-msgid "Voltages"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3553
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4090
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2900
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2932
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4636
-#: ../../Firmware/ultralcd.cpp:4677
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1519
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1523
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3542
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7003
-#: ../../Firmware/ultralcd.cpp:7007 ../../Firmware/ultralcd.cpp:7027
-#: ../../Firmware/ultralcd.cpp:7033 ../../Firmware/ultralcd.cpp:7057
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4914
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4229
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5618
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1740
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3352
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3349
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3330
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3333
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3312
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3318
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3315
-#: ../../Firmware/ultralcd.cpp:3343
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3321
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3346
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2513
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4230
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2235
-#: ../../Firmware/ultralcd.cpp:2819 ../../Firmware/ultralcd.cpp:3199
-#: ../../Firmware/ultralcd.cpp:4804 ../../Firmware/ultralcd.cpp:6019
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4206
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4231
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5857
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2584
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2173
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1835
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1839
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1707
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
-msgid "unknown state"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6107
-#: ../../Firmware/ultralcd.cpp:6110
-msgid "🔃Refresh"
-msgstr ""
diff --git a/lang/po/Firmware_lb.po b/lang/po/Firmware_lb.po
deleted file mode 100644
index 7bd25bb69..000000000
--- a/lang/po/Firmware_lb.po
+++ /dev/null
@@ -1,2037 +0,0 @@
-# Translation of Prusa-Firmware into Luxembourgish.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:29:04 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:29:04 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: lb\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7066
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1987
-#: ../../Firmware/ultralcd.cpp:3854
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2689
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7343
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4190
-#: ../../Firmware/ultralcd.cpp:4199
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4423
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4327
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1424
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:3002
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4478
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5886
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3271 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4919
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:5801
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5594
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3568
-msgid ""
-"Autoloading filament available only when filament sensor is turned on..."
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2320
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7045
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7044
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2770
-#: ../../Firmware/ultralcd.cpp:5883 ../../Firmware/ultralcd.cpp:7878
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2051 ../../Firmware/Marlin_main.cpp:4767
-#: ../../Firmware/Marlin_main.cpp:4819 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1422 ../../Firmware/ultralcd.cpp:5743
-#: ../../Firmware/ultralcd.cpp:5913
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6260 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:575
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6298 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:578
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4931
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2214 ../../Firmware/Marlin_main.cpp:2993
-#: ../../Firmware/Marlin_main.cpp:3003
-#: ../../Firmware/mesh_bed_calibration.cpp:2862
-#: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1477
-#: ../../Firmware/ultralcd.cpp:1745
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4921
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1607 ../../Firmware/Marlin_main.cpp:1629
-#: ../../Firmware/messages.cpp:77
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5886
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5811
-msgid "Brightness"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4925
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4927
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2965
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2170 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:623
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2964
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7345
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5603
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:635
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7752
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5560
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5519
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2182
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2234
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6208
-#: ../../Firmware/ultralcd.cpp:7335
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6217
-#: ../../Firmware/ultralcd.cpp:7336
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7337
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7338
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7334
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7433
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7340
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7341
-#: ../../Firmware/ultralcd.cpp:7342
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4784
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2237
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3744
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4723
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2144
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3682
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1281 ../../Firmware/ultralcd.cpp:1291
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4363
-#: ../../Firmware/ultralcd.cpp:5787 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5793
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5197
-#: ../../Firmware/ultralcd.cpp:5589
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4322
-#: ../../Firmware/ultralcd.cpp:4327 ../../Firmware/ultralcd.cpp:4332
-msgid "Cutter"
-msgstr ""
-
-#. MSG_MMU_CUTTING_FIL c=18
-#: ../../Firmware/mmu.cpp:1048
-msgid "Cutting filament"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1687
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5886
-msgid "Dim"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4821
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/Marlin_main.cpp:3411
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4164
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4233
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2298
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_FSENS_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3581
-msgid "ERROR: Filament sensor is not responding, please check connection."
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5178
-#: ../../Firmware/ultralcd.cpp:5587
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_EJECTING_FILAMENT c=20
-#: ../../Firmware/mmu.cpp:1076
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:7015
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:7020
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7006
-msgid "Endstops"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3514
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1741
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4248
-#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4267
-#: ../../Firmware/ultralcd.cpp:4269
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4723
-#: ../../Firmware/ultralcd.cpp:4726
-msgid "FS Action"
-msgstr ""
-
-#. MSG_FS_V_03_OR_OLDER c=18
-#: ../../Firmware/Marlin_main.cpp:9485
-msgid "FS v0.3 or older"
-msgstr ""
-
-#. MSG_FS_V_04_OR_NEWER c=18
-#: ../../Firmware/Marlin_main.cpp:9477
-msgid "FS v0.4 or newer"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5611
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5614
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7061
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5745
-#: ../../Firmware/ultralcd.cpp:5915
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7173
-#: ../../Firmware/ultralcd.cpp:7331 ../../Firmware/ultralcd.cpp:7332
-#: ../../Firmware/ultralcd.cpp:7333
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:5778
-msgid "Fans check"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1280 ../../Firmware/ultralcd.cpp:1346
-#: ../../Firmware/ultralcd.cpp:1348
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3470
-#: ../../Firmware/ultralcd.cpp:4247 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4263 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5767
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3854
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2306
-#: ../../Firmware/ultralcd.cpp:2312
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2236
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7056
-#: ../../Firmware/ultralcd.cpp:7060 ../../Firmware/ultralcd.cpp:7064
-#: ../../Firmware/ultralcd.cpp:7360
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2384
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7491
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5336
-#: ../../Firmware/ultralcd.cpp:5652
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4917
-#: ../../Firmware/ultralcd.cpp:5446
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4085
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_MMU_FIX_ISSUE c=20 r=4
-#: ../../Firmware/mmu.cpp:728
-msgid "Fix the issue and then press button on MMU unit."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5746
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7026
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7050
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:418
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:424
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
-#: ../../Firmware/util.cpp:471
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
-#: ../../Firmware/util.cpp:477
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:385
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:391
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4674
-#: ../../Firmware/ultralcd.cpp:4677 ../../Firmware/ultralcd.cpp:4680
-#: ../../Firmware/ultralcd.cpp:4683
-msgid "Gcode"
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4691
-#: ../../Firmware/ultralcd.cpp:4745 ../../Firmware/ultralcd.cpp:4837
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6998
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6203 ../../Firmware/messages.cpp:46
-#: ../../Firmware/ultralcd.cpp:567
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9398
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6234 ../../Firmware/messages.cpp:47
-#: ../../Firmware/ultralcd.cpp:570
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4061
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4064
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Salut, ech sinn Aren Original Prusa i3 Drecker. Wellt Dir datt ech Iech "
-"duerch de Setupprozess guideieren?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5802
-msgid "High power"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7351
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4094
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4102
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4172
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2531
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5500
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5567
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2171
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6253
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3874
-#: ../../Firmware/ultralcd.cpp:4127 ../../Firmware/ultralcd.cpp:4130
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/Marlin_main.cpp:4886
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4103
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1315
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1188
-#: ../../Firmware/ultralcd.cpp:1278 ../../Firmware/ultralcd.cpp:1288
-#: ../../Firmware/ultralcd.cpp:1345
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2515
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7032
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5884
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5885
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4845
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4857
-#: ../../Firmware/ultralcd.cpp:5515
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/ultralcd.cpp:5142
-msgid "Load all"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5144
-#: ../../Firmware/ultralcd.cpp:5155 ../../Firmware/ultralcd.cpp:5584
-#: ../../Firmware/ultralcd.cpp:5598
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5585
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2204
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3641 ../../Firmware/messages.cpp:55
-#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
-#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
-#: ../../Firmware/ultralcd.cpp:2215 ../../Firmware/ultralcd.cpp:3968
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7038
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4481
-msgid "Loud"
-msgstr ""
-
-#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:881
-msgid "MK3 firmware detected on MK3S printer"
-msgstr ""
-
-#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:874
-msgid "MK3S firmware detected on MK3 printer"
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4400
-#: ../../Firmware/ultralcd.cpp:4401
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
-#: ../../Firmware/mmu.cpp:763
-msgid "MMU OK. Resuming position..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
-#: ../../Firmware/mmu.cpp:756
-msgid "MMU OK. Resuming temperature..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING c=20 r=4
-#: ../../Firmware/mmu.cpp:774
-msgid "MMU OK. Resuming..."
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1189
-#: ../../Firmware/ultralcd.cpp:1212
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILED c=20
-#: ../../Firmware/mmu.cpp:1248
-msgid "MMU load failed"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1190
-#: ../../Firmware/ultralcd.cpp:1213
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_MMU_USER_ATTENTION c=20 r=3
-#: ../../Firmware/mmu.cpp:723
-msgid "MMU needs user attention."
-msgstr ""
-
-#. MSG_MMU_POWER_FAILS c=15
-#: ../../Firmware/ultralcd.cpp:1214
-msgid "MMU power fails"
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1699
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5858
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1314 ../../Firmware/ultralcd.cpp:1357
-#: ../../Firmware/ultralcd.cpp:1664 ../../Firmware/ultralcd.cpp:4814
-#: ../../Firmware/ultralcd.cpp:4911 ../../Firmware/ultralcd.cpp:5141
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5176
-#: ../../Firmware/ultralcd.cpp:5195 ../../Firmware/ultralcd.cpp:5739
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3293
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5854
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4842
-#: ../../Firmware/ultralcd.cpp:4929
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4357 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5785
-#: ../../Firmware/ultralcd.cpp:5792 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5800 ../../Firmware/ultralcd.cpp:5801
-#: ../../Firmware/ultralcd.cpp:5802 ../../Firmware/ultralcd.cpp:5886
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3617
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4594
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4600
-#: ../../Firmware/ultralcd.cpp:4603
-msgid "Model"
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7012
-#: ../../Firmware/ultralcd.cpp:7021 ../../Firmware/ultralcd.cpp:7039
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3511
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3512
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3513
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4820
-msgid "Move axis"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
-#: ../../Firmware/ultralcd.cpp:2521 ../../Firmware/ultralcd.cpp:2566
-#: ../../Firmware/ultralcd.cpp:3430 ../../Firmware/ultralcd.cpp:4247
-#: ../../Firmware/ultralcd.cpp:4295 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5858
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2823
-#: ../../Firmware/ultralcd.cpp:3199 ../../Firmware/ultralcd.cpp:4804
-#: ../../Firmware/ultralcd.cpp:6018
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5377
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4424
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:4594 ../../Firmware/ultralcd.cpp:4603
-#: ../../Firmware/ultralcd.cpp:4633 ../../Firmware/ultralcd.cpp:4642
-#: ../../Firmware/ultralcd.cpp:4674 ../../Firmware/ultralcd.cpp:4683
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4400 ../../Firmware/ultralcd.cpp:4416
-#: ../../Firmware/ultralcd.cpp:4435 ../../Firmware/ultralcd.cpp:5785
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6999
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7198
-#: ../../Firmware/ultralcd.cpp:7213 ../../Firmware/ultralcd.cpp:7221
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3981
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4110
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4101
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1421
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4518 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5904
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4565
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4269
-#: ../../Firmware/ultralcd.cpp:4303 ../../Firmware/ultralcd.cpp:4332
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4853
-#: ../../Firmware/ultralcd.cpp:5666 ../../Firmware/ultralcd.cpp:5763
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1535
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4263
-#: ../../Firmware/ultralcd.cpp:4267 ../../Firmware/ultralcd.cpp:4299
-#: ../../Firmware/ultralcd.cpp:4322 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4849
-#: ../../Firmware/ultralcd.cpp:4853 ../../Firmware/ultralcd.cpp:5767
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5787
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4472
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9718 ../../Firmware/messages.cpp:164
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1017
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1022
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4932
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:657
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4932 ../../Firmware/Marlin_main.cpp:5035
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:654
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4939
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3380
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5112 ../../Firmware/messages.cpp:110
-#: ../../Firmware/ultralcd.cpp:3374
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4726
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5529
-#: ../../Firmware/ultralcd.cpp:5531
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3315 ../../Firmware/messages.cpp:68
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4195
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6280
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6993
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4167
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3291 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3964
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3959
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3882
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3551
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
-#: ../../Firmware/ultralcd.cpp:4104
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11580 ../../Firmware/Marlin_main.cpp:11633
-#: ../../Firmware/messages.cpp:74
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5235
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_EJECT_REMOVE c=20 r=4
-#: ../../Firmware/mmu.cpp:1082
-msgid "Please remove filament and then press the knob."
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4100
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3313 ../../Firmware/Marlin_main.cpp:4896
-#: ../../Firmware/messages.cpp:79
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4872
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_UPDATE_MMU2_FW c=20 r=4
-#: ../../Firmware/mmu.cpp:1002
-msgid "Please update firmware in your MMU2. Waiting for reset."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3547 ../../Firmware/Marlin_main.cpp:3563
-#: ../../Firmware/Marlin_main.cpp:7931 ../../Firmware/messages.cpp:71
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:2216
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1279 ../../Firmware/ultralcd.cpp:1289
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5524
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2299
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2919
-#: ../../Firmware/ultralcd.cpp:3943 ../../Firmware/ultralcd.cpp:3945
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2007
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:2004
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1995
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:2000
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1828
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11611
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
-#: ../../Firmware/mmu.cpp:727
-msgid "Press the knob to resume nozzle temperature."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:852
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7354
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5557
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:866
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2385
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1730
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:299
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:305
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4853
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10954
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/mmu.cpp:831
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5448
-msgid "Rename"
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2775
-#: ../../Firmware/ultralcd.cpp:5449
-msgid "Reset"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4936
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
-#: ../../Firmware/ultralcd.cpp:5543 ../../Firmware/ultralcd.cpp:5545
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:665
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2516
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3903
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_RUNOUTS c=7
-#: ../../Firmware/ultralcd.cpp:1290
-msgid "Runouts"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4414
-#: ../../Firmware/ultralcd.cpp:4416 ../../Firmware/ultralcd.cpp:4433
-#: ../../Firmware/ultralcd.cpp:4435
-msgid "SD card"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9747 ../../Firmware/messages.cpp:108
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3297 ../../Firmware/Marlin_main.cpp:3317
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5441
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3985
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:50
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3853
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3698
-#: ../../Firmware/ultralcd.cpp:4860
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4141
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3990
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6552
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6320
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4923
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6992
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6556
-#: ../../Firmware/ultralcd.cpp:7079 ../../Firmware/ultralcd.cpp:7344
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1567
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1742
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6284
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2792
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3510
-#: ../../Firmware/ultralcd.cpp:3715 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:5602 ../../Firmware/ultralcd.cpp:5849
-#: ../../Firmware/ultralcd.cpp:5902
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2559
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:60
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3843
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4934
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4380
-#: ../../Firmware/ultralcd.cpp:4475 ../../Firmware/ultralcd.cpp:5800
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2558
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3060
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4422
-#: ../../Firmware/ultralcd.cpp:4423 ../../Firmware/ultralcd.cpp:4424
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:96
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4472 ../../Firmware/ultralcd.cpp:4475
-#: ../../Firmware/ultralcd.cpp:4478 ../../Firmware/ultralcd.cpp:4481
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5740
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7196
-#: ../../Firmware/ultralcd.cpp:7211 ../../Firmware/ultralcd.cpp:7219
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4885
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5607
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4357
-#: ../../Firmware/ultralcd.cpp:4401 ../../Firmware/ultralcd.cpp:5792
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5438
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5550
-#: ../../Firmware/ultralcd.cpp:6017
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4518
-#: ../../Firmware/ultralcd.cpp:4600 ../../Firmware/ultralcd.cpp:4639
-#: ../../Firmware/ultralcd.cpp:4680
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5616
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7051
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4816
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1748
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3993
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1561 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4422
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5887
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1168
-#: ../../Firmware/ultralcd.cpp:1316
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1211
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1347
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2406
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2407
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5522
-msgid "Tune"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5586
-#: ../../Firmware/ultralcd.cpp:5600
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
-#: ../../Firmware/ultralcd.cpp:5219
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6288
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1751
-msgid "Voltages"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3553
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4090
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2900
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2932
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4636
-#: ../../Firmware/ultralcd.cpp:4677
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1519
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1523
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3542
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7003
-#: ../../Firmware/ultralcd.cpp:7007 ../../Firmware/ultralcd.cpp:7027
-#: ../../Firmware/ultralcd.cpp:7033 ../../Firmware/ultralcd.cpp:7057
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4914
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4229
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5618
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1740
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3352
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3349
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3330
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3333
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3312
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3318
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3315
-#: ../../Firmware/ultralcd.cpp:3343
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3321
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3346
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2513
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4230
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2235
-#: ../../Firmware/ultralcd.cpp:2819 ../../Firmware/ultralcd.cpp:3199
-#: ../../Firmware/ultralcd.cpp:4804 ../../Firmware/ultralcd.cpp:6019
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4206
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4231
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5857
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2584
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2173
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1835
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1839
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1707
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
-msgid "unknown state"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6107
-#: ../../Firmware/ultralcd.cpp:6110
-msgid "🔃Refresh"
-msgstr ""
diff --git a/lang/po/Firmware_lt.po b/lang/po/Firmware_lt.po
deleted file mode 100644
index ad4bd68b0..000000000
--- a/lang/po/Firmware_lt.po
+++ /dev/null
@@ -1,2037 +0,0 @@
-# Translation of Prusa-Firmware into Lithuanian.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:29:10 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:29:10 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: lt\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7066
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1987
-#: ../../Firmware/ultralcd.cpp:3854
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2689
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7343
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4190
-#: ../../Firmware/ultralcd.cpp:4199
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4423
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4327
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1424
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:3002
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4478
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5886
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3271 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4919
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:5801
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5594
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3568
-msgid ""
-"Autoloading filament available only when filament sensor is turned on..."
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2320
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7045
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7044
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2770
-#: ../../Firmware/ultralcd.cpp:5883 ../../Firmware/ultralcd.cpp:7878
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2051 ../../Firmware/Marlin_main.cpp:4767
-#: ../../Firmware/Marlin_main.cpp:4819 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1422 ../../Firmware/ultralcd.cpp:5743
-#: ../../Firmware/ultralcd.cpp:5913
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6260 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:575
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6298 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:578
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4931
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2214 ../../Firmware/Marlin_main.cpp:2993
-#: ../../Firmware/Marlin_main.cpp:3003
-#: ../../Firmware/mesh_bed_calibration.cpp:2862
-#: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1477
-#: ../../Firmware/ultralcd.cpp:1745
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4921
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1607 ../../Firmware/Marlin_main.cpp:1629
-#: ../../Firmware/messages.cpp:77
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5886
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5811
-msgid "Brightness"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4925
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4927
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2965
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2170 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:623
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2964
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7345
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5603
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:635
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7752
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5560
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5519
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2182
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2234
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6208
-#: ../../Firmware/ultralcd.cpp:7335
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6217
-#: ../../Firmware/ultralcd.cpp:7336
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7337
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7338
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7334
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7433
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7340
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7341
-#: ../../Firmware/ultralcd.cpp:7342
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4784
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2237
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3744
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4723
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2144
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3682
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1281 ../../Firmware/ultralcd.cpp:1291
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4363
-#: ../../Firmware/ultralcd.cpp:5787 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5793
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5197
-#: ../../Firmware/ultralcd.cpp:5589
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4322
-#: ../../Firmware/ultralcd.cpp:4327 ../../Firmware/ultralcd.cpp:4332
-msgid "Cutter"
-msgstr ""
-
-#. MSG_MMU_CUTTING_FIL c=18
-#: ../../Firmware/mmu.cpp:1048
-msgid "Cutting filament"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1687
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5886
-msgid "Dim"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4821
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/Marlin_main.cpp:3411
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4164
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4233
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2298
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_FSENS_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3581
-msgid "ERROR: Filament sensor is not responding, please check connection."
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5178
-#: ../../Firmware/ultralcd.cpp:5587
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_EJECTING_FILAMENT c=20
-#: ../../Firmware/mmu.cpp:1076
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:7015
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:7020
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7006
-msgid "Endstops"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3514
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1741
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4248
-#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4267
-#: ../../Firmware/ultralcd.cpp:4269
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4723
-#: ../../Firmware/ultralcd.cpp:4726
-msgid "FS Action"
-msgstr ""
-
-#. MSG_FS_V_03_OR_OLDER c=18
-#: ../../Firmware/Marlin_main.cpp:9485
-msgid "FS v0.3 or older"
-msgstr ""
-
-#. MSG_FS_V_04_OR_NEWER c=18
-#: ../../Firmware/Marlin_main.cpp:9477
-msgid "FS v0.4 or newer"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5611
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5614
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7061
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5745
-#: ../../Firmware/ultralcd.cpp:5915
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7173
-#: ../../Firmware/ultralcd.cpp:7331 ../../Firmware/ultralcd.cpp:7332
-#: ../../Firmware/ultralcd.cpp:7333
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:5778
-msgid "Fans check"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1280 ../../Firmware/ultralcd.cpp:1346
-#: ../../Firmware/ultralcd.cpp:1348
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3470
-#: ../../Firmware/ultralcd.cpp:4247 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4263 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5767
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3854
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2306
-#: ../../Firmware/ultralcd.cpp:2312
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2236
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7056
-#: ../../Firmware/ultralcd.cpp:7060 ../../Firmware/ultralcd.cpp:7064
-#: ../../Firmware/ultralcd.cpp:7360
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2384
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7491
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5336
-#: ../../Firmware/ultralcd.cpp:5652
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4917
-#: ../../Firmware/ultralcd.cpp:5446
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4085
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_MMU_FIX_ISSUE c=20 r=4
-#: ../../Firmware/mmu.cpp:728
-msgid "Fix the issue and then press button on MMU unit."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5746
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7026
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7050
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:418
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:424
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
-#: ../../Firmware/util.cpp:471
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
-#: ../../Firmware/util.cpp:477
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:385
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:391
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4674
-#: ../../Firmware/ultralcd.cpp:4677 ../../Firmware/ultralcd.cpp:4680
-#: ../../Firmware/ultralcd.cpp:4683
-msgid "Gcode"
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4691
-#: ../../Firmware/ultralcd.cpp:4745 ../../Firmware/ultralcd.cpp:4837
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6998
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6203 ../../Firmware/messages.cpp:46
-#: ../../Firmware/ultralcd.cpp:567
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9398
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6234 ../../Firmware/messages.cpp:47
-#: ../../Firmware/ultralcd.cpp:570
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4061
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4064
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Sveiki, as esu jusu originalus Prusa i3 spausdintuvas. Ar noretumete, kad "
-"padetu jums atlikti sarankos procesa?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5802
-msgid "High power"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7351
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4094
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4102
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4172
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2531
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5500
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5567
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2171
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6253
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3874
-#: ../../Firmware/ultralcd.cpp:4127 ../../Firmware/ultralcd.cpp:4130
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/Marlin_main.cpp:4886
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4103
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1315
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1188
-#: ../../Firmware/ultralcd.cpp:1278 ../../Firmware/ultralcd.cpp:1288
-#: ../../Firmware/ultralcd.cpp:1345
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2515
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7032
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5884
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5885
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4845
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4857
-#: ../../Firmware/ultralcd.cpp:5515
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/ultralcd.cpp:5142
-msgid "Load all"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5144
-#: ../../Firmware/ultralcd.cpp:5155 ../../Firmware/ultralcd.cpp:5584
-#: ../../Firmware/ultralcd.cpp:5598
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5585
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2204
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3641 ../../Firmware/messages.cpp:55
-#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
-#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
-#: ../../Firmware/ultralcd.cpp:2215 ../../Firmware/ultralcd.cpp:3968
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7038
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4481
-msgid "Loud"
-msgstr ""
-
-#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:881
-msgid "MK3 firmware detected on MK3S printer"
-msgstr ""
-
-#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:874
-msgid "MK3S firmware detected on MK3 printer"
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4400
-#: ../../Firmware/ultralcd.cpp:4401
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
-#: ../../Firmware/mmu.cpp:763
-msgid "MMU OK. Resuming position..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
-#: ../../Firmware/mmu.cpp:756
-msgid "MMU OK. Resuming temperature..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING c=20 r=4
-#: ../../Firmware/mmu.cpp:774
-msgid "MMU OK. Resuming..."
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1189
-#: ../../Firmware/ultralcd.cpp:1212
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILED c=20
-#: ../../Firmware/mmu.cpp:1248
-msgid "MMU load failed"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1190
-#: ../../Firmware/ultralcd.cpp:1213
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_MMU_USER_ATTENTION c=20 r=3
-#: ../../Firmware/mmu.cpp:723
-msgid "MMU needs user attention."
-msgstr ""
-
-#. MSG_MMU_POWER_FAILS c=15
-#: ../../Firmware/ultralcd.cpp:1214
-msgid "MMU power fails"
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1699
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5858
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1314 ../../Firmware/ultralcd.cpp:1357
-#: ../../Firmware/ultralcd.cpp:1664 ../../Firmware/ultralcd.cpp:4814
-#: ../../Firmware/ultralcd.cpp:4911 ../../Firmware/ultralcd.cpp:5141
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5176
-#: ../../Firmware/ultralcd.cpp:5195 ../../Firmware/ultralcd.cpp:5739
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3293
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5854
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4842
-#: ../../Firmware/ultralcd.cpp:4929
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4357 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5785
-#: ../../Firmware/ultralcd.cpp:5792 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5800 ../../Firmware/ultralcd.cpp:5801
-#: ../../Firmware/ultralcd.cpp:5802 ../../Firmware/ultralcd.cpp:5886
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3617
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4594
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4600
-#: ../../Firmware/ultralcd.cpp:4603
-msgid "Model"
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7012
-#: ../../Firmware/ultralcd.cpp:7021 ../../Firmware/ultralcd.cpp:7039
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3511
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3512
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3513
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4820
-msgid "Move axis"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
-#: ../../Firmware/ultralcd.cpp:2521 ../../Firmware/ultralcd.cpp:2566
-#: ../../Firmware/ultralcd.cpp:3430 ../../Firmware/ultralcd.cpp:4247
-#: ../../Firmware/ultralcd.cpp:4295 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5858
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2823
-#: ../../Firmware/ultralcd.cpp:3199 ../../Firmware/ultralcd.cpp:4804
-#: ../../Firmware/ultralcd.cpp:6018
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5377
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4424
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:4594 ../../Firmware/ultralcd.cpp:4603
-#: ../../Firmware/ultralcd.cpp:4633 ../../Firmware/ultralcd.cpp:4642
-#: ../../Firmware/ultralcd.cpp:4674 ../../Firmware/ultralcd.cpp:4683
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4400 ../../Firmware/ultralcd.cpp:4416
-#: ../../Firmware/ultralcd.cpp:4435 ../../Firmware/ultralcd.cpp:5785
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6999
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7198
-#: ../../Firmware/ultralcd.cpp:7213 ../../Firmware/ultralcd.cpp:7221
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3981
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4110
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4101
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1421
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4518 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5904
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4565
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4269
-#: ../../Firmware/ultralcd.cpp:4303 ../../Firmware/ultralcd.cpp:4332
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4853
-#: ../../Firmware/ultralcd.cpp:5666 ../../Firmware/ultralcd.cpp:5763
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1535
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4263
-#: ../../Firmware/ultralcd.cpp:4267 ../../Firmware/ultralcd.cpp:4299
-#: ../../Firmware/ultralcd.cpp:4322 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4849
-#: ../../Firmware/ultralcd.cpp:4853 ../../Firmware/ultralcd.cpp:5767
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5787
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4472
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9718 ../../Firmware/messages.cpp:164
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1017
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1022
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4932
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:657
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4932 ../../Firmware/Marlin_main.cpp:5035
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:654
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4939
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3380
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5112 ../../Firmware/messages.cpp:110
-#: ../../Firmware/ultralcd.cpp:3374
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4726
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5529
-#: ../../Firmware/ultralcd.cpp:5531
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3315 ../../Firmware/messages.cpp:68
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4195
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6280
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6993
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4167
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3291 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3964
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3959
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3882
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3551
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
-#: ../../Firmware/ultralcd.cpp:4104
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11580 ../../Firmware/Marlin_main.cpp:11633
-#: ../../Firmware/messages.cpp:74
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5235
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_EJECT_REMOVE c=20 r=4
-#: ../../Firmware/mmu.cpp:1082
-msgid "Please remove filament and then press the knob."
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4100
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3313 ../../Firmware/Marlin_main.cpp:4896
-#: ../../Firmware/messages.cpp:79
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4872
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_UPDATE_MMU2_FW c=20 r=4
-#: ../../Firmware/mmu.cpp:1002
-msgid "Please update firmware in your MMU2. Waiting for reset."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3547 ../../Firmware/Marlin_main.cpp:3563
-#: ../../Firmware/Marlin_main.cpp:7931 ../../Firmware/messages.cpp:71
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:2216
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1279 ../../Firmware/ultralcd.cpp:1289
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5524
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2299
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2919
-#: ../../Firmware/ultralcd.cpp:3943 ../../Firmware/ultralcd.cpp:3945
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2007
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:2004
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1995
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:2000
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1828
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11611
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
-#: ../../Firmware/mmu.cpp:727
-msgid "Press the knob to resume nozzle temperature."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:852
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7354
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5557
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:866
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2385
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1730
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:299
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:305
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4853
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10954
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/mmu.cpp:831
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5448
-msgid "Rename"
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2775
-#: ../../Firmware/ultralcd.cpp:5449
-msgid "Reset"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4936
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
-#: ../../Firmware/ultralcd.cpp:5543 ../../Firmware/ultralcd.cpp:5545
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:665
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2516
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3903
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_RUNOUTS c=7
-#: ../../Firmware/ultralcd.cpp:1290
-msgid "Runouts"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4414
-#: ../../Firmware/ultralcd.cpp:4416 ../../Firmware/ultralcd.cpp:4433
-#: ../../Firmware/ultralcd.cpp:4435
-msgid "SD card"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9747 ../../Firmware/messages.cpp:108
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3297 ../../Firmware/Marlin_main.cpp:3317
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5441
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3985
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:50
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3853
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3698
-#: ../../Firmware/ultralcd.cpp:4860
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4141
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3990
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6552
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6320
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4923
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6992
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6556
-#: ../../Firmware/ultralcd.cpp:7079 ../../Firmware/ultralcd.cpp:7344
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1567
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1742
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6284
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2792
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3510
-#: ../../Firmware/ultralcd.cpp:3715 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:5602 ../../Firmware/ultralcd.cpp:5849
-#: ../../Firmware/ultralcd.cpp:5902
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2559
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:60
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3843
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4934
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4380
-#: ../../Firmware/ultralcd.cpp:4475 ../../Firmware/ultralcd.cpp:5800
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2558
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3060
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4422
-#: ../../Firmware/ultralcd.cpp:4423 ../../Firmware/ultralcd.cpp:4424
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:96
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4472 ../../Firmware/ultralcd.cpp:4475
-#: ../../Firmware/ultralcd.cpp:4478 ../../Firmware/ultralcd.cpp:4481
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5740
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7196
-#: ../../Firmware/ultralcd.cpp:7211 ../../Firmware/ultralcd.cpp:7219
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4885
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5607
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4357
-#: ../../Firmware/ultralcd.cpp:4401 ../../Firmware/ultralcd.cpp:5792
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5438
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5550
-#: ../../Firmware/ultralcd.cpp:6017
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4518
-#: ../../Firmware/ultralcd.cpp:4600 ../../Firmware/ultralcd.cpp:4639
-#: ../../Firmware/ultralcd.cpp:4680
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5616
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7051
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4816
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1748
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3993
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1561 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4422
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5887
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1168
-#: ../../Firmware/ultralcd.cpp:1316
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1211
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1347
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2406
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2407
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5522
-msgid "Tune"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5586
-#: ../../Firmware/ultralcd.cpp:5600
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
-#: ../../Firmware/ultralcd.cpp:5219
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6288
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1751
-msgid "Voltages"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3553
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4090
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2900
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2932
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4636
-#: ../../Firmware/ultralcd.cpp:4677
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1519
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1523
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3542
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7003
-#: ../../Firmware/ultralcd.cpp:7007 ../../Firmware/ultralcd.cpp:7027
-#: ../../Firmware/ultralcd.cpp:7033 ../../Firmware/ultralcd.cpp:7057
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4914
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4229
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5618
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1740
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3352
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3349
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3330
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3333
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3312
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3318
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3315
-#: ../../Firmware/ultralcd.cpp:3343
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3321
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3346
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2513
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4230
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2235
-#: ../../Firmware/ultralcd.cpp:2819 ../../Firmware/ultralcd.cpp:3199
-#: ../../Firmware/ultralcd.cpp:4804 ../../Firmware/ultralcd.cpp:6019
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4206
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4231
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5857
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2584
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2173
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1835
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1839
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1707
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
-msgid "unknown state"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6107
-#: ../../Firmware/ultralcd.cpp:6110
-msgid "🔃Refresh"
-msgstr ""
diff --git a/lang/po/Firmware_sl.po b/lang/po/Firmware_sl.po
deleted file mode 100644
index 18ad58cc0..000000000
--- a/lang/po/Firmware_sl.po
+++ /dev/null
@@ -1,2037 +0,0 @@
-# Translation of Prusa-Firmware into Slovanian.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Prusa-Firmware\n"
-"POT-Creation-Date: Wed 16 Mar 2022 09:31:25 AM CET\n"
-"PO-Revision-Date: Wed 16 Mar 2022 09:31:25 AM CET\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"Language: sl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.7\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
-msgid " 0.3 or older"
-msgstr ""
-
-#. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
-msgid " 0.4 or newer"
-msgstr ""
-
-#. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7066
-msgid "%s level expected"
-msgstr ""
-
-#. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1987
-#: ../../Firmware/ultralcd.cpp:3854
-msgid ">Cancel"
-msgstr ""
-
-#. MSG_BABYSTEPPING_Z c=15
-#. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2689
-msgid "Adjusting Z:"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7343
-msgid "All correct"
-msgstr ""
-
-#. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4190
-#: ../../Firmware/ultralcd.cpp:4199
-msgid "All is done. Happy printing!"
-msgstr ""
-
-#. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4423
-msgid "Alphabet"
-msgstr ""
-
-#. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4327
-msgid "Always"
-msgstr ""
-
-#. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1424
-msgid "Ambient"
-msgstr ""
-
-#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:3002
-msgid "Are left and right Z~carriages all up?"
-msgstr ""
-
-#. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4478
-msgid "Assist"
-msgstr ""
-
-#. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5886
-msgid "Auto"
-msgstr ""
-
-#. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3271 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4919
-msgid "Auto home"
-msgstr ""
-
-#. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:5801
-msgid "Auto power"
-msgstr ""
-
-#. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5594
-msgid "AutoLoad filament"
-msgstr ""
-
-#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3568
-msgid ""
-"Autoloading filament available only when filament sensor is turned on..."
-msgstr ""
-
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2320
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
-#. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7045
-msgid "Axis"
-msgstr ""
-
-#. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7044
-msgid "Axis length"
-msgstr ""
-
-#. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2770
-#: ../../Firmware/ultralcd.cpp:5883 ../../Firmware/ultralcd.cpp:7878
-msgid "Back"
-msgstr ""
-
-#. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2051 ../../Firmware/Marlin_main.cpp:4767
-#: ../../Firmware/Marlin_main.cpp:4819 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1422 ../../Firmware/ultralcd.cpp:5743
-#: ../../Firmware/ultralcd.cpp:5913
-msgid "Bed"
-msgstr ""
-
-#. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6260 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:575
-msgid "Bed Heating"
-msgstr ""
-
-#. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6298 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:578
-msgid "Bed done"
-msgstr ""
-
-#. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4931
-msgid "Bed level correct"
-msgstr ""
-
-#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2214 ../../Firmware/Marlin_main.cpp:2993
-#: ../../Firmware/Marlin_main.cpp:3003
-#: ../../Firmware/mesh_bed_calibration.cpp:2862
-#: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
-msgid ""
-"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
-"reset."
-msgstr ""
-
-#. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:7002
-msgid "Bed/Heater"
-msgstr ""
-
-#. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1477
-#: ../../Firmware/ultralcd.cpp:1745
-msgid "Belt status"
-msgstr ""
-
-#. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4921
-msgid "Belt test"
-msgstr ""
-
-#. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1607 ../../Firmware/Marlin_main.cpp:1629
-#: ../../Firmware/messages.cpp:77
-msgid "Blackout occurred. Recover print?"
-msgstr ""
-
-#. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5886
-msgid "Bright"
-msgstr ""
-
-#. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5811
-msgid "Brightness"
-msgstr ""
-
-#. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4925
-msgid "Calibrate XYZ"
-msgstr ""
-
-#. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4927
-msgid "Calibrate Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2965
-msgid ""
-"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2170 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:623
-msgid "Calibrating Z"
-msgstr ""
-
-#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2964
-msgid ""
-"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
-"stoppers. Click when done."
-msgstr ""
-
-#. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7345
-msgid "Calibrating home"
-msgstr ""
-
-#. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5603
-msgid "Calibration"
-msgstr ""
-
-#. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:635
-msgid "Calibration done"
-msgstr ""
-
-#. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7752
-msgid "Card removed"
-msgstr ""
-
-#. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5560
-msgid "Change SD card"
-msgstr ""
-
-#. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5519
-#: ../../Firmware/ultralcd.cpp:5752
-msgid "Change filament"
-msgstr ""
-
-#. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2182
-msgid "Change success!"
-msgstr ""
-
-#. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2234
-msgid "Changed correctly?"
-msgstr ""
-
-#. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6208
-#: ../../Firmware/ultralcd.cpp:7335
-msgid "Checking X axis"
-msgstr ""
-
-#. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6217
-#: ../../Firmware/ultralcd.cpp:7336
-msgid "Checking Y axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7337
-msgid "Checking Z axis"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7338
-msgid "Checking bed"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7334
-msgid "Checking endstops"
-msgstr ""
-
-#. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7433
-msgid "Checking file"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7340
-msgid "Checking hotend"
-msgstr ""
-
-#. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7341
-#: ../../Firmware/ultralcd.cpp:7342
-msgid "Checking sensors"
-msgstr ""
-
-#. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4784
-msgid "Checks"
-msgstr ""
-
-#. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2237
-msgid "Color not correct"
-msgstr ""
-
-#. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3744
-msgid "Community made"
-msgstr ""
-
-#. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4723
-msgid "Cont."
-msgstr ""
-
-#. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2144
-msgid "Cooldown"
-msgstr ""
-
-#. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3682
-msgid "Copy selected language?"
-msgstr ""
-
-#. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
-#: ../../Firmware/ultralcd.cpp:1281 ../../Firmware/ultralcd.cpp:1291
-msgid "Crash"
-msgstr ""
-
-#. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4363
-#: ../../Firmware/ultralcd.cpp:5787 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5793
-msgid "Crash det."
-msgstr ""
-
-#. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
-msgid "Crash detected."
-msgstr ""
-
-#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3540
-msgid ""
-"Crash detection can\n"
-"be turned on only in\n"
-"Normal mode"
-msgstr ""
-
-#. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5197
-#: ../../Firmware/ultralcd.cpp:5589
-msgid "Cut filament"
-msgstr ""
-
-#. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4322
-#: ../../Firmware/ultralcd.cpp:4327 ../../Firmware/ultralcd.cpp:4332
-msgid "Cutter"
-msgstr ""
-
-#. MSG_MMU_CUTTING_FIL c=18
-#: ../../Firmware/mmu.cpp:1048
-msgid "Cutting filament"
-msgstr ""
-
-#. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1687
-msgid "Date:"
-msgstr ""
-
-#. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5886
-msgid "Dim"
-msgstr ""
-
-#. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4821
-msgid "Disable steppers"
-msgstr ""
-
-#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/Marlin_main.cpp:3411
-#: ../../Firmware/messages.cpp:11
-msgid ""
-"Distance between tip of the nozzle and the bed surface has not been set yet. "
-"Please follow the manual, chapter First steps, section First layer "
-"calibration."
-msgstr ""
-
-#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4164
-msgid ""
-"Do you want to repeat last step to readjust distance between nozzle and "
-"heatbed?"
-msgstr ""
-
-#. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4233
-msgid "E-correct:"
-msgstr ""
-
-#. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2298
-msgid "ERROR:"
-msgstr ""
-
-#. MSG_FSENS_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3581
-msgid "ERROR: Filament sensor is not responding, please check connection."
-msgstr ""
-
-#. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5178
-#: ../../Firmware/ultralcd.cpp:5587
-msgid "Eject filament"
-msgstr ""
-
-#. MSG_EJECTING_FILAMENT c=20
-#: ../../Firmware/mmu.cpp:1076
-msgid "Ejecting filament"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:7015
-msgid "Endstop"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:7020
-msgid "Endstop not hit"
-msgstr ""
-
-#. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7006
-msgid "Endstops"
-msgstr ""
-
-#. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3514
-msgid "Extruder"
-msgstr ""
-
-#. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1741
-msgid "Extruder info"
-msgstr ""
-
-#. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4248
-#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4267
-#: ../../Firmware/ultralcd.cpp:4269
-msgid "F. autoload"
-msgstr ""
-
-#. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4723
-#: ../../Firmware/ultralcd.cpp:4726
-msgid "FS Action"
-msgstr ""
-
-#. MSG_FS_V_03_OR_OLDER c=18
-#: ../../Firmware/Marlin_main.cpp:9485
-msgid "FS v0.3 or older"
-msgstr ""
-
-#. MSG_FS_V_04_OR_NEWER c=18
-#: ../../Firmware/Marlin_main.cpp:9477
-msgid "FS v0.4 or newer"
-msgstr ""
-
-#. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5611
-msgid "Fail stats"
-msgstr ""
-
-#. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5614
-msgid "Fail stats MMU"
-msgstr ""
-
-#. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7061
-msgid "False triggering"
-msgstr ""
-
-#. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5745
-#: ../../Firmware/ultralcd.cpp:5915
-msgid "Fan speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7173
-#: ../../Firmware/ultralcd.cpp:7331 ../../Firmware/ultralcd.cpp:7332
-#: ../../Firmware/ultralcd.cpp:7333
-msgid "Fan test"
-msgstr ""
-
-#. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:5778
-msgid "Fans check"
-msgstr ""
-
-#. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
-#: ../../Firmware/ultralcd.cpp:1280 ../../Firmware/ultralcd.cpp:1346
-#: ../../Firmware/ultralcd.cpp:1348
-msgid "Fil. runouts"
-msgstr ""
-
-#. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3470
-#: ../../Firmware/ultralcd.cpp:4247 ../../Firmware/ultralcd.cpp:4253
-#: ../../Firmware/ultralcd.cpp:4263 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5767
-msgid "Fil. sensor"
-msgstr ""
-
-#. MSG_FILAMENT c=17
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3854
-msgid "Filament"
-msgstr ""
-
-#. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2306
-#: ../../Firmware/ultralcd.cpp:2312
-msgid "Filament extruding & with correct color?"
-msgstr ""
-
-#. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2236
-msgid "Filament not loaded"
-msgstr ""
-
-#. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7056
-#: ../../Firmware/ultralcd.cpp:7060 ../../Firmware/ultralcd.cpp:7064
-#: ../../Firmware/ultralcd.cpp:7360
-msgid "Filament sensor"
-msgstr ""
-
-#. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2384
-msgid "Filament used"
-msgstr ""
-
-#. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7491
-msgid "File incomplete. Continue anyway?"
-msgstr ""
-
-#. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5336
-#: ../../Firmware/ultralcd.cpp:5652
-msgid "Finishing movements"
-msgstr ""
-
-#. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4917
-#: ../../Firmware/ultralcd.cpp:5446
-msgid "First layer cal."
-msgstr ""
-
-#. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4085
-msgid "First, I will run the selftest to check most common assembly problems."
-msgstr ""
-
-#. MSG_MMU_FIX_ISSUE c=20 r=4
-#: ../../Firmware/mmu.cpp:728
-msgid "Fix the issue and then press button on MMU unit."
-msgstr ""
-
-#. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5746
-msgid "Flow"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
-msgid ""
-"For a Nozzle change please read\n"
-"prusa.io/nozzle-mk3s"
-msgstr ""
-
-#. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7026
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Front print fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2745
-msgid "Front side[µm]"
-msgstr ""
-
-#. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7050
-msgid "Front/left fans"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
-#: ../../Firmware/util.cpp:418
-msgid "G-code sliced for a different level. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
-#: ../../Firmware/util.cpp:424
-msgid ""
-"G-code sliced for a different level. Please re-slice the model again. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
-#: ../../Firmware/util.cpp:471
-msgid "G-code sliced for a different printer type. Continue?"
-msgstr ""
-
-#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
-#: ../../Firmware/util.cpp:477
-msgid ""
-"G-code sliced for a different printer type. Please re-slice the model again. "
-"Print cancelled."
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:385
-msgid "G-code sliced for a newer firmware. Continue?"
-msgstr ""
-
-#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
-#: ../../Firmware/util.cpp:391
-msgid ""
-"G-code sliced for a newer firmware. Please update the firmware. Print "
-"cancelled."
-msgstr ""
-
-#. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4674
-#: ../../Firmware/ultralcd.cpp:4677 ../../Firmware/ultralcd.cpp:4680
-#: ../../Firmware/ultralcd.cpp:4683
-msgid "Gcode"
-msgstr ""
-
-#. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4691
-#: ../../Firmware/ultralcd.cpp:4745 ../../Firmware/ultralcd.cpp:4837
-msgid "HW Setup"
-msgstr ""
-
-#. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6998
-msgid "Heater/Thermistor"
-msgstr ""
-
-#. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6203 ../../Firmware/messages.cpp:46
-#: ../../Firmware/ultralcd.cpp:567
-msgid "Heating"
-msgstr ""
-
-#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9398
-msgid "Heating disabled by safety timer."
-msgstr ""
-
-#. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6234 ../../Firmware/messages.cpp:47
-#: ../../Firmware/ultralcd.cpp:570
-msgid "Heating done."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4061
-msgid ""
-"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
-"setup process, in which the Z-axis will be calibrated. Then, you will be "
-"ready to print."
-msgstr ""
-
-#. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4064
-msgid ""
-"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
-"through the setup process?"
-msgstr ""
-"Zivjo, jaz sem vas originalni tiskalnik Prusa i3. Ali zelite, da vas vodim "
-"skozi postopek nastavitve?"
-
-#. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5802
-msgid "High power"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
-#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
-msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
-msgstr ""
-
-#. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7351
-msgid "Hotend fan:"
-msgstr ""
-
-#. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4094
-msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr ""
-
-#. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4102
-msgid "I will run z calibration now."
-msgstr ""
-
-#. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4172
-msgid ""
-"If you have additional steel sheets, calibrate their presets in Settings - "
-"HW Setup - Steel sheets."
-msgstr ""
-
-#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
-#: ../../Firmware/mesh_bed_calibration.cpp:2531
-msgid "Improving bed calibration point"
-msgstr ""
-
-#. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5500
-msgid "Info screen"
-msgstr ""
-
-#. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5567
-msgid "Init. SD card"
-msgstr ""
-
-#. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2171
-msgid "Insert filament"
-msgstr ""
-
-#. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6253
-msgid ""
-"Insert the filament (do not load it) into the extruder and then press the "
-"knob."
-msgstr ""
-
-#. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3874
-#: ../../Firmware/ultralcd.cpp:4127 ../../Firmware/ultralcd.cpp:4130
-msgid "Is filament loaded?"
-msgstr ""
-
-#. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/Marlin_main.cpp:4886
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4103
-msgid "Is steel sheet on heatbed?"
-msgstr ""
-
-#. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
-msgid "Iteration"
-msgstr ""
-
-#. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1315
-msgid "Last print"
-msgstr ""
-
-#. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1188
-#: ../../Firmware/ultralcd.cpp:1278 ../../Firmware/ultralcd.cpp:1288
-#: ../../Firmware/ultralcd.cpp:1345
-msgid "Last print failures"
-msgstr ""
-
-#. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2515
-msgid "Left"
-msgstr ""
-
-#. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7032
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
-msgid "Left hotend fan?"
-msgstr ""
-
-#. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2743
-msgid "Left side [µm]"
-msgstr ""
-
-#. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5884
-msgid "Level Bright"
-msgstr ""
-
-#. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5885
-msgid "Level Dimmed"
-msgstr ""
-
-#. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4845
-msgid "Lin. correction"
-msgstr ""
-
-#. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4857
-#: ../../Firmware/ultralcd.cpp:5515
-msgid "Live adjust Z"
-msgstr ""
-
-#. MSG_LOAD_ALL c=18
-#: ../../Firmware/ultralcd.cpp:5142
-msgid "Load all"
-msgstr ""
-
-#. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5144
-#: ../../Firmware/ultralcd.cpp:5155 ../../Firmware/ultralcd.cpp:5584
-#: ../../Firmware/ultralcd.cpp:5598
-msgid "Load filament"
-msgstr ""
-
-#. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5585
-msgid "Load to nozzle"
-msgstr ""
-
-#. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2204
-msgid "Loading color"
-msgstr ""
-
-#. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3641 ../../Firmware/messages.cpp:55
-#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
-#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
-#: ../../Firmware/ultralcd.cpp:2215 ../../Firmware/ultralcd.cpp:3968
-msgid "Loading filament"
-msgstr ""
-
-#. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7038
-msgid "Loose pulley"
-msgstr ""
-
-#. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4481
-msgid "Loud"
-msgstr ""
-
-#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:881
-msgid "MK3 firmware detected on MK3S printer"
-msgstr ""
-
-#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:874
-msgid "MK3S firmware detected on MK3 printer"
-msgstr ""
-
-#. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4400
-#: ../../Firmware/ultralcd.cpp:4401
-msgid "MMU Mode"
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
-#: ../../Firmware/mmu.cpp:763
-msgid "MMU OK. Resuming position..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
-#: ../../Firmware/mmu.cpp:756
-msgid "MMU OK. Resuming temperature..."
-msgstr ""
-
-#. MSG_MMU_OK_RESUMING c=20 r=4
-#: ../../Firmware/mmu.cpp:774
-msgid "MMU OK. Resuming..."
-msgstr ""
-
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1189
-#: ../../Firmware/ultralcd.cpp:1212
-msgid "MMU fails"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILED c=20
-#: ../../Firmware/mmu.cpp:1248
-msgid "MMU load failed"
-msgstr ""
-
-#. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1190
-#: ../../Firmware/ultralcd.cpp:1213
-msgid "MMU load fails"
-msgstr ""
-
-#. MSG_MMU_USER_ATTENTION c=20 r=3
-#: ../../Firmware/mmu.cpp:723
-msgid "MMU needs user attention."
-msgstr ""
-
-#. MSG_MMU_POWER_FAILS c=15
-#: ../../Firmware/ultralcd.cpp:1214
-msgid "MMU power fails"
-msgstr ""
-
-#. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1699
-msgid "MMU2 connected"
-msgstr ""
-
-#. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5858
-msgid "Magnets comp."
-msgstr ""
-
-#. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1314 ../../Firmware/ultralcd.cpp:1357
-#: ../../Firmware/ultralcd.cpp:1664 ../../Firmware/ultralcd.cpp:4814
-#: ../../Firmware/ultralcd.cpp:4911 ../../Firmware/ultralcd.cpp:5141
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5176
-#: ../../Firmware/ultralcd.cpp:5195 ../../Firmware/ultralcd.cpp:5739
-msgid "Main"
-msgstr ""
-
-#. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2556
-msgid "Measured skew"
-msgstr ""
-
-#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3293
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
-msgid "Measuring reference height of calibration point"
-msgstr ""
-
-#. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5854
-msgid "Mesh"
-msgstr ""
-
-#. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4842
-#: ../../Firmware/ultralcd.cpp:4929
-msgid "Mesh Bed Leveling"
-msgstr ""
-
-#. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4357 ../../Firmware/ultralcd.cpp:4377
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:4383
-#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5785
-#: ../../Firmware/ultralcd.cpp:5792 ../../Firmware/ultralcd.cpp:5799
-#: ../../Firmware/ultralcd.cpp:5800 ../../Firmware/ultralcd.cpp:5801
-#: ../../Firmware/ultralcd.cpp:5802 ../../Firmware/ultralcd.cpp:5886
-msgid "Mode"
-msgstr ""
-
-#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3617
-msgid "Mode change in progress..."
-msgstr ""
-
-#. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4594
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4600
-#: ../../Firmware/ultralcd.cpp:4603
-msgid "Model"
-msgstr ""
-
-#. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7012
-#: ../../Firmware/ultralcd.cpp:7021 ../../Firmware/ultralcd.cpp:7039
-msgid "Motor"
-msgstr ""
-
-#. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3511
-msgid "Move X"
-msgstr ""
-
-#. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3512
-msgid "Move Y"
-msgstr ""
-
-#. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3513
-msgid "Move Z"
-msgstr ""
-
-#. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4820
-msgid "Move axis"
-msgstr ""
-
-#. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
-#: ../../Firmware/ultralcd.cpp:2521 ../../Firmware/ultralcd.cpp:2566
-#: ../../Firmware/ultralcd.cpp:3430 ../../Firmware/ultralcd.cpp:4247
-#: ../../Firmware/ultralcd.cpp:4295 ../../Firmware/ultralcd.cpp:5759
-#: ../../Firmware/ultralcd.cpp:5858
-msgid "N/A"
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
-#: ../../Firmware/util.cpp:199
-msgid "New firmware version available:"
-msgstr ""
-
-#. MSG_NO c=4
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2823
-#: ../../Firmware/ultralcd.cpp:3199 ../../Firmware/ultralcd.cpp:4804
-#: ../../Firmware/ultralcd.cpp:6018
-msgid "No"
-msgstr ""
-
-#. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5565
-msgid "No SD card"
-msgstr ""
-
-#. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5377
-msgid "No move."
-msgstr ""
-
-#. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4424
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:4594 ../../Firmware/ultralcd.cpp:4603
-#: ../../Firmware/ultralcd.cpp:4633 ../../Firmware/ultralcd.cpp:4642
-#: ../../Firmware/ultralcd.cpp:4674 ../../Firmware/ultralcd.cpp:4683
-msgid "None"
-msgstr ""
-
-#. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4355
-#: ../../Firmware/ultralcd.cpp:4400 ../../Firmware/ultralcd.cpp:4416
-#: ../../Firmware/ultralcd.cpp:4435 ../../Firmware/ultralcd.cpp:5785
-msgid "Normal"
-msgstr ""
-
-#. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6999
-msgid "Not connected"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7198
-#: ../../Firmware/ultralcd.cpp:7213 ../../Firmware/ultralcd.cpp:7221
-msgid "Not spinning"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3981
-msgid ""
-"Now I will calibrate distance between tip of the nozzle and heatbed surface."
-msgstr ""
-
-#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4110
-msgid "Now I will preheat nozzle for PLA."
-msgstr ""
-
-#. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4101
-msgid "Now remove the test print from steel sheet."
-msgstr ""
-
-#. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1421
-#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4518 ../../Firmware/ultralcd.cpp:4521
-#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5904
-msgid "Nozzle"
-msgstr ""
-
-#. MSG_NOZZLE_CNG_MENU c=18
-#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
-msgid "Nozzle change"
-msgstr ""
-
-#. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4565
-msgid "Nozzle d."
-msgstr ""
-
-#. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
-#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4269
-#: ../../Firmware/ultralcd.cpp:4303 ../../Firmware/ultralcd.cpp:4332
-#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4830
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4853
-#: ../../Firmware/ultralcd.cpp:5666 ../../Firmware/ultralcd.cpp:5763
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5789
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "Off"
-msgstr ""
-
-#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1535
-msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr ""
-
-#. MSG_ON c=3
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4263
-#: ../../Firmware/ultralcd.cpp:4267 ../../Firmware/ultralcd.cpp:4299
-#: ../../Firmware/ultralcd.cpp:4322 ../../Firmware/ultralcd.cpp:4360
-#: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4849
-#: ../../Firmware/ultralcd.cpp:4853 ../../Firmware/ultralcd.cpp:5767
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5787
-#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
-#: ../../Firmware/ultralcd.cpp:7885
-msgid "On"
-msgstr ""
-
-#. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4472
-msgid "Once"
-msgstr ""
-
-#. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9718 ../../Firmware/messages.cpp:164
-msgid "PAUSED THERMAL ERROR"
-msgstr ""
-
-#. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1017
-msgid "PID cal."
-msgstr ""
-
-#. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1022
-msgid "PID cal. finished"
-msgstr ""
-
-#. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4932
-msgid "PID calibration"
-msgstr ""
-
-#. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:657
-msgid "PINDA Heating"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4932 ../../Firmware/Marlin_main.cpp:5035
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:654
-#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4939
-msgid "PINDA cal."
-msgstr ""
-
-#. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3380
-msgid "PINDA calibration failed"
-msgstr ""
-
-#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5112 ../../Firmware/messages.cpp:110
-#: ../../Firmware/ultralcd.cpp:3374
-msgid ""
-"PINDA calibration is finished and active. It can be disabled in menu "
-"Settings->PINDA cal."
-msgstr ""
-
-#. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4726
-msgid "Pause"
-msgstr ""
-
-#. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5529
-#: ../../Firmware/ultralcd.cpp:5531
-msgid "Pause print"
-msgstr ""
-
-#. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3315 ../../Firmware/messages.cpp:68
-msgid ""
-"Place a sheet of paper under the nozzle during the calibration of first 4 "
-"points. If the nozzle catches the paper, power off the printer immediately."
-msgstr ""
-
-#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4195
-msgid ""
-"Please check our handbook and fix the problem. Then resume the Wizard by "
-"rebooting the printer."
-msgstr ""
-
-#. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6280
-msgid "Please check the IR sensor connection, unload filament if present."
-msgstr ""
-
-#. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6993
-msgid "Please check:"
-msgstr ""
-
-#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4167
-msgid "Please clean heatbed and then press the knob."
-msgstr ""
-
-#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3291 ../../Firmware/messages.cpp:24
-msgid "Please clean the nozzle for calibration. Click when done."
-msgstr ""
-
-#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3964
-msgid ""
-"Please insert filament into the extruder, then press the knob to load it."
-msgstr ""
-
-#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3959
-msgid ""
-"Please insert filament into the first tube of the MMU, then press the knob "
-"to load it."
-msgstr ""
-
-#. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3882
-msgid "Please load filament first."
-msgstr ""
-
-#. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3551
-msgid "Please open idler and remove filament manually."
-msgstr ""
-
-#. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
-#: ../../Firmware/ultralcd.cpp:4104
-msgid "Please place steel sheet on heatbed."
-msgstr ""
-
-#. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11580 ../../Firmware/Marlin_main.cpp:11633
-#: ../../Firmware/messages.cpp:74
-msgid "Please press the knob to unload filament"
-msgstr ""
-
-#. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5235
-msgid "Please pull out filament immediately"
-msgstr ""
-
-#. MSG_EJECT_REMOVE c=20 r=4
-#: ../../Firmware/mmu.cpp:1082
-msgid "Please remove filament and then press the knob."
-msgstr ""
-
-#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4100
-msgid "Please remove shipping helpers first."
-msgstr ""
-
-#. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3313 ../../Firmware/Marlin_main.cpp:4896
-#: ../../Firmware/messages.cpp:79
-msgid "Please remove steel sheet from heatbed."
-msgstr ""
-
-#. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4872
-msgid "Please run XYZ calibration first."
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6277
-msgid "Please unload the filament first, then repeat this action."
-msgstr ""
-
-#. MSG_UPDATE_MMU2_FW c=20 r=4
-#: ../../Firmware/mmu.cpp:1002
-msgid "Please update firmware in your MMU2. Waiting for reset."
-msgstr ""
-
-#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-#: ../../Firmware/util.cpp:203
-msgid "Please upgrade."
-msgstr ""
-
-#. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3547 ../../Firmware/Marlin_main.cpp:3563
-#: ../../Firmware/Marlin_main.cpp:7931 ../../Firmware/messages.cpp:71
-#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:2216
-msgid "Please wait"
-msgstr ""
-
-#. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1238
-#: ../../Firmware/ultralcd.cpp:1279 ../../Firmware/ultralcd.cpp:1289
-msgid "Power failures"
-msgstr ""
-
-#. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5524
-msgid "Preheat"
-msgstr ""
-
-#. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2299
-msgid "Preheat the nozzle!"
-msgstr ""
-
-#. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2919
-#: ../../Firmware/ultralcd.cpp:3943 ../../Firmware/ultralcd.cpp:3945
-msgid "Preheating nozzle. Please wait."
-msgstr ""
-
-#. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2007
-msgid "Preheating to cut"
-msgstr ""
-
-#. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:2004
-msgid "Preheating to eject"
-msgstr ""
-
-#. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1995
-msgid "Preheating to load"
-msgstr ""
-
-#. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:2000
-msgid "Preheating to unload"
-msgstr ""
-
-#. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1828
-msgid "Press the knob"
-msgstr ""
-
-#. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11611
-msgid "Press the knob to preheat nozzle and continue."
-msgstr ""
-
-#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
-#: ../../Firmware/mmu.cpp:727
-msgid "Press the knob to resume nozzle temperature."
-msgstr ""
-
-#. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:852
-msgid "Print aborted"
-msgstr ""
-
-#. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1145
-#: ../../Firmware/ultralcd.cpp:7354
-msgid "Print fan:"
-msgstr ""
-
-#. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5557
-msgid "Print from SD"
-msgstr ""
-
-#. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:866
-msgid "Print paused"
-msgstr ""
-
-#. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2385
-msgid "Print time"
-msgstr ""
-
-#. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1730
-msgid "Printer IP Addr:"
-msgstr ""
-
-#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42
-msgid ""
-"Printer has not been calibrated yet. Please follow the manual, chapter First "
-"steps, section Calibration flow."
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
-#: ../../Firmware/util.cpp:299
-msgid "Printer nozzle diameter differs from the G-code. Continue?"
-msgstr ""
-
-#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
-#: ../../Firmware/util.cpp:305
-msgid ""
-"Printer nozzle diameter differs from the G-code. Please check the value in "
-"settings. Print cancelled."
-msgstr ""
-
-#. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4853
-msgid "RPi port"
-msgstr ""
-
-#. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2746
-msgid "Rear side [µm]"
-msgstr ""
-
-#. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10954
-msgid "Recovering print"
-msgstr ""
-
-#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/mmu.cpp:831
-msgid "Remove old filament and press the knob to start loading new filament."
-msgstr ""
-
-#. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5448
-msgid "Rename"
-msgstr ""
-
-#. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2775
-#: ../../Firmware/ultralcd.cpp:5449
-msgid "Reset"
-msgstr ""
-
-#. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4936
-msgid "Reset XYZ calibr."
-msgstr ""
-
-#. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
-#: ../../Firmware/ultralcd.cpp:5543 ../../Firmware/ultralcd.cpp:5545
-msgid "Resume print"
-msgstr ""
-
-#. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:665
-msgid "Resuming print"
-msgstr ""
-
-#. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2516
-msgid "Right"
-msgstr ""
-
-#. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2744
-msgid "Right side[µm]"
-msgstr ""
-
-#. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3903
-msgid ""
-"Running Wizard will delete current calibration results and start from the "
-"beginning. Continue?"
-msgstr ""
-
-#. MSG_RUNOUTS c=7
-#: ../../Firmware/ultralcd.cpp:1290
-msgid "Runouts"
-msgstr ""
-
-#. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4414
-#: ../../Firmware/ultralcd.cpp:4416 ../../Firmware/ultralcd.cpp:4433
-#: ../../Firmware/ultralcd.cpp:4435
-msgid "SD card"
-msgstr ""
-
-#. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9747 ../../Firmware/messages.cpp:108
-msgid "STOPPED."
-msgstr ""
-
-#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3297 ../../Firmware/Marlin_main.cpp:3317
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
-msgid "Searching bed calibration point"
-msgstr ""
-
-#. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5441
-msgid "Select"
-msgstr ""
-
-#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3985
-msgid ""
-"Select a filament for the First Layer Calibration and select it in the on-"
-"screen menu."
-msgstr ""
-
-#. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:50
-msgid "Select extruder:"
-msgstr ""
-
-#. MSG_SELECT_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3853
-msgid "Select filament:"
-msgstr ""
-
-#. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3698
-#: ../../Firmware/ultralcd.cpp:4860
-msgid "Select language"
-msgstr ""
-
-#. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4141
-msgid "Select nozzle preheat temperature which matches your material."
-msgstr ""
-
-#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3990
-msgid "Select temperature which matches your material."
-msgstr ""
-
-#. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6552
-msgid "Self test OK"
-msgstr ""
-
-#. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6320
-msgid "Self test start"
-msgstr ""
-
-#. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4923
-msgid "Selftest"
-msgstr ""
-
-#. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6992
-msgid "Selftest error!"
-msgstr ""
-
-#. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6556
-#: ../../Firmware/ultralcd.cpp:7079 ../../Firmware/ultralcd.cpp:7344
-msgid "Selftest failed"
-msgstr ""
-
-#. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1567
-msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr ""
-
-#. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1742
-msgid "Sensor info"
-msgstr ""
-
-#. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6284
-msgid "Sensor verified, remove the filament now."
-msgstr ""
-
-#. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2792
-msgid "Set temperature:"
-msgstr ""
-
-#. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3510
-#: ../../Firmware/ultralcd.cpp:3715 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:5602 ../../Firmware/ultralcd.cpp:5849
-#: ../../Firmware/ultralcd.cpp:5902
-msgid "Settings"
-msgstr ""
-
-#. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2559
-msgid "Severe skew"
-msgstr ""
-
-#. MSG_SHEET c=10
-#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:60
-msgid "Sheet"
-msgstr ""
-
-#. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3843
-msgid ""
-"Sheet %.7s\n"
-"Z offset: %+1.3fmm\n"
-"%cContinue\n"
-"%cReset"
-msgstr ""
-
-#. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4934
-msgid "Show end stops"
-msgstr ""
-
-#. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4380
-#: ../../Firmware/ultralcd.cpp:4475 ../../Firmware/ultralcd.cpp:5800
-msgid "Silent"
-msgstr ""
-
-#. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2558
-msgid "Slight skew"
-msgstr ""
-
-#. MSG_FILE_CNT c=20 r=6
-#: ../../Firmware/cardreader.cpp:818
-msgid ""
-"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
-"100."
-msgstr ""
-
-#. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3060
-msgid "Some problem encountered, Z-leveling enforced ..."
-msgstr ""
-
-#. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4422
-#: ../../Firmware/ultralcd.cpp:4423 ../../Firmware/ultralcd.cpp:4424
-msgid "Sort"
-msgstr ""
-
-#. MSG_SORTING_FILES c=20
-#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:96
-msgid "Sorting files"
-msgstr ""
-
-#. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4469
-#: ../../Firmware/ultralcd.cpp:4472 ../../Firmware/ultralcd.cpp:4475
-#: ../../Firmware/ultralcd.cpp:4478 ../../Firmware/ultralcd.cpp:4481
-msgid "Sound"
-msgstr ""
-
-#. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5740
-msgid "Speed"
-msgstr ""
-
-#. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7196
-#: ../../Firmware/ultralcd.cpp:7211 ../../Firmware/ultralcd.cpp:7219
-msgid "Spinning"
-msgstr ""
-
-#. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4885
-msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
-msgstr ""
-
-#. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5607
-msgid "Statistics"
-msgstr ""
-
-#. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4357
-#: ../../Firmware/ultralcd.cpp:4401 ../../Firmware/ultralcd.cpp:5792
-msgid "Stealth"
-msgstr ""
-
-#. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5438
-msgid "Steel sheets"
-msgstr ""
-
-#. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5550
-#: ../../Firmware/ultralcd.cpp:6017
-msgid "Stop print"
-msgstr ""
-
-#. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4518
-#: ../../Firmware/ultralcd.cpp:4600 ../../Firmware/ultralcd.cpp:4639
-#: ../../Firmware/ultralcd.cpp:4680
-msgid "Strict"
-msgstr ""
-
-#. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5616
-msgid "Support"
-msgstr ""
-
-#. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7051
-msgid "Swapped"
-msgstr ""
-
-#. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
-msgid "THERMAL ANOMALY"
-msgstr ""
-
-#. MSG_TM_CAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4054
-msgid "Temp model cal. takes approx. 12 mins."
-msgstr ""
-
-#. MSG_TM_NOT_CAL c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
-#: ../../Firmware/messages.cpp:170
-msgid "Temp model not calibrated yet."
-msgstr ""
-
-#. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4816
-msgid "Temperature"
-msgstr ""
-
-#. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1748
-msgid "Temperatures"
-msgstr ""
-
-#. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3993
-msgid ""
-"The printer will start printing a zig-zag line. Rotate the knob until you "
-"reach the optimal height. Check the pictures in the handbook (Calibration "
-"chapter)."
-msgstr ""
-
-#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1561 ../../Firmware/messages.cpp:43
-msgid ""
-"There is still a need to make Z calibration. Please follow the manual, "
-"chapter First steps, section Calibration flow."
-msgstr ""
-
-#. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4422
-msgid "Time"
-msgstr ""
-
-#. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5887
-msgid "Timeout"
-msgstr ""
-
-#. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1168
-#: ../../Firmware/ultralcd.cpp:1316
-msgid "Total"
-msgstr ""
-
-#. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1211
-#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1347
-msgid "Total failures"
-msgstr ""
-
-#. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2406
-msgid "Total filament"
-msgstr ""
-
-#. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2407
-msgid "Total print time"
-msgstr ""
-
-#. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5522
-msgid "Tune"
-msgstr ""
-
-#. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5586
-#: ../../Firmware/ultralcd.cpp:5600
-msgid "Unload filament"
-msgstr ""
-
-#. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
-#: ../../Firmware/ultralcd.cpp:5219
-msgid "Unloading filament"
-msgstr ""
-
-#. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6288
-msgid "Verification failed, remove the filament and try again."
-msgstr ""
-
-#. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1751
-msgid "Voltages"
-msgstr ""
-
-#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3553
-msgid ""
-"WARNING:\n"
-"Crash detection\n"
-"disabled in\n"
-"Stealth mode"
-msgstr ""
-
-#. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4090
-msgid "Wait for user..."
-msgstr ""
-
-#. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2900
-msgid "Waiting for PINDA probe cooling"
-msgstr ""
-
-#. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2932
-msgid "Waiting for nozzle and bed cooling"
-msgstr ""
-
-#. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4515
-#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4636
-#: ../../Firmware/ultralcd.cpp:4677
-msgid "Warn"
-msgstr ""
-
-#. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1527
-msgid "Warning: both printer type and motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1519
-msgid "Warning: motherboard type changed."
-msgstr ""
-
-#. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1523
-msgid "Warning: printer type changed."
-msgstr ""
-
-#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3542
-msgid "Was filament unload successful?"
-msgstr ""
-
-#. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7003
-#: ../../Firmware/ultralcd.cpp:7007 ../../Firmware/ultralcd.cpp:7027
-#: ../../Firmware/ultralcd.cpp:7033 ../../Firmware/ultralcd.cpp:7057
-msgid "Wiring error"
-msgstr ""
-
-#. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4914
-msgid "Wizard"
-msgstr ""
-
-#. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4229
-msgid "X-correct:"
-msgstr ""
-
-#. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5618
-msgid "XFLASH init"
-msgstr ""
-
-#. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1740
-msgid "XYZ cal. details"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3352
-msgid "XYZ calibration all right. Skew will be corrected automatically."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3349
-msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3330
-msgid "XYZ calibration compromised. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3333
-msgid ""
-"XYZ calibration compromised. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3312
-msgid "XYZ calibration failed. Bed calibration point was not found."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3318
-msgid "XYZ calibration failed. Front calibration points not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3315
-#: ../../Firmware/ultralcd.cpp:3343
-msgid "XYZ calibration failed. Please consult the manual."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3321
-msgid "XYZ calibration failed. Right front calibration point not reachable."
-msgstr ""
-
-#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3346
-msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
-msgstr ""
-
-#. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2513
-msgid "Y distance from min"
-msgstr ""
-
-#. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4230
-msgid "Y-correct:"
-msgstr ""
-
-#. MSG_YES c=4
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2235
-#: ../../Firmware/ultralcd.cpp:2819 ../../Firmware/ultralcd.cpp:3199
-#: ../../Firmware/ultralcd.cpp:4804 ../../Firmware/ultralcd.cpp:6019
-msgid "Yes"
-msgstr ""
-
-#. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4206
-msgid "You can always resume the Wizard from Calibration -> Wizard."
-msgstr ""
-
-#. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4231
-msgid "Z-correct:"
-msgstr ""
-
-#. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5857
-msgid "Z-probe nr."
-msgstr ""
-
-#. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2584
-msgid "[0;0] point offset"
-msgstr ""
-
-#. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2173
-msgid "and press the knob"
-msgstr ""
-
-#. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1835
-msgid "to load filament"
-msgstr ""
-
-#. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1839
-msgid "to unload filament"
-msgstr ""
-
-#. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1707
-msgid "unknown"
-msgstr ""
-
-#. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
-msgid "unknown state"
-msgstr ""
-
-#. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6107
-#: ../../Firmware/ultralcd.cpp:6110
-msgid "🔃Refresh"
-msgstr ""