josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

LF line endings

This commit is contained in:
PavelSindler 2017-06-16 11:10:22 +02:00
parent 5e7952b6c9
commit d74c029327
15 changed files with 8013 additions and 8013 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

694
Firmware/Marlin.h
View File

@ -1,348 +1,348 @@
// Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
// License: GPL
#ifndef MARLIN_H
#define MARLIN_H
#define FORCE_INLINE __attribute__((always_inline)) inline
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
#include <util/delay.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <avr/interrupt.h>
#include "fastio.h"
#include "Configuration.h"
#include "pins.h"
#ifndef AT90USB
#define HardwareSerial_h // trick to disable the standard HWserial
#endif
#if (ARDUINO >= 100)
# include "Arduino.h"
#else
# include "WProgram.h"
#endif
// Arduino < 1.0.0 does not define this, so we need to do it ourselves
#ifndef analogInputToDigitalPin
# define analogInputToDigitalPin(p) ((p) + A0)
#endif
#ifdef AT90USB
#include "HardwareSerial.h"
#endif
#include "MarlinSerial.h"
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
#include "WString.h"
#ifdef AT90USB
#ifdef BTENABLED
#define MYSERIAL bt
#else
#define MYSERIAL Serial
#endif // BTENABLED
#else
#define MYSERIAL MSerial
#endif
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))
#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y))
#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_PROTOCOLRPGM(x) (serialprintPGM((x)))
#define SERIAL_PROTOCOLLN(x) (MYSERIAL.print(x),MYSERIAL.write('\n'))
#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x)),MYSERIAL.write('\n'))
#define SERIAL_PROTOCOLLNRPGM(x) (serialprintPGM((x)),MYSERIAL.write('\n'))
extern const char errormagic[] PROGMEM;
extern const char echomagic[] PROGMEM;
#define SERIAL_ERROR_START (serialprintPGM(errormagic))
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ERRORRPGM(x) SERIAL_PROTOCOLRPGM(x)
#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
#define SERIAL_ERRORLNRPGM(x) SERIAL_PROTOCOLLNRPGM(x)
#define SERIAL_ECHO_START (serialprintPGM(echomagic))
#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x)
#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ECHORPGM(x) SERIAL_PROTOCOLRPGM(x)
#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
#define SERIAL_ECHOLNRPGM(x) SERIAL_PROTOCOLLNRPGM(x)
#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value)))
void serial_echopair_P(const char *s_P, float v);
void serial_echopair_P(const char *s_P, double v);
void serial_echopair_P(const char *s_P, unsigned long v);
//Things to write to serial from Program memory. Saves 400 to 2k of RAM.
FORCE_INLINE void serialprintPGM(const char *str)
{
char ch=pgm_read_byte(str);
while(ch)
{
MYSERIAL.write(ch);
ch=pgm_read_byte(++str);
}
}
bool is_buffer_empty();
void get_command();
void process_commands();
void ramming();
void manage_inactivity(bool ignore_stepper_queue=false);
#if defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
#define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON)
#define disable_x() { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }
#else
#define enable_x() ;
#define disable_x() ;
#endif
#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
#ifdef Y_DUAL_STEPPER_DRIVERS
#define enable_y() { WRITE(Y_ENABLE_PIN, Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, Y_ENABLE_ON); }
#define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, !Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
#else
#define enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON)
#define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
#endif
#else
#define enable_y() ;
#define disable_y() ;
#endif
#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
#if defined(Z_AXIS_ALWAYS_ON)
#ifdef Z_DUAL_STEPPER_DRIVERS
#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#else
#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
#define disable_z() ;
#endif
#else
#ifdef Z_DUAL_STEPPER_DRIVERS
#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#else
#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#endif
#endif
#else
#define enable_z() ;
#define disable_z() ;
#endif
//#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
//#ifdef Z_DUAL_STEPPER_DRIVERS
//#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
//#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
//#else
//#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
//#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
//#endif
//#else
//#define enable_z() ;
//#define disable_z() ;
//#endif
#if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1)
#define enable_e0() WRITE(E0_ENABLE_PIN, E_ENABLE_ON)
#define disable_e0() WRITE(E0_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e0() /* nothing */
#define disable_e0() /* nothing */
#endif
#if (EXTRUDERS > 1) && defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1)
#define enable_e1() WRITE(E1_ENABLE_PIN, E_ENABLE_ON)
#define disable_e1() WRITE(E1_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e1() /* nothing */
#define disable_e1() /* nothing */
#endif
#if (EXTRUDERS > 2) && defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1)
#define enable_e2() WRITE(E2_ENABLE_PIN, E_ENABLE_ON)
#define disable_e2() WRITE(E2_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e2() /* nothing */
#define disable_e2() /* nothing */
#endif
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
void FlushSerialRequestResend();
void ClearToSend();
void get_coordinates();
void prepare_move();
void kill(const char *full_screen_message = NULL);
void Stop();
bool IsStopped();
//put an ASCII command at the end of the current buffer.
void enquecommand(const char *cmd, bool from_progmem = false);
//put an ASCII command at the end of the current buffer, read from flash
#define enquecommand_P(cmd) enquecommand(cmd, true)
void enquecommand_front(const char *cmd, bool from_progmem = false);
//put an ASCII command at the end of the current buffer, read from flash
#define enquecommand_P(cmd) enquecommand(cmd, true)
#define enquecommand_front_P(cmd) enquecommand_front(cmd, true)
void repeatcommand_front();
// Remove all lines from the command queue.
void cmdqueue_reset();
void prepare_arc_move(char isclockwise);
void clamp_to_software_endstops(float target[3]);
void refresh_cmd_timeout(void);
#ifdef FAST_PWM_FAN
void setPwmFrequency(uint8_t pin, int val);
#endif
#ifndef CRITICAL_SECTION_START
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
#define CRITICAL_SECTION_END SREG = _sreg;
#endif //CRITICAL_SECTION_START
extern float homing_feedrate[];
extern bool axis_relative_modes[];
extern int feedmultiply;
extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all extruders
extern bool volumetric_enabled;
extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
extern float current_position[NUM_AXIS] ;
extern float destination[NUM_AXIS] ;
extern float add_homing[3];
extern float min_pos[3];
extern float max_pos[3];
extern bool axis_known_position[3];
extern float zprobe_zoffset;
extern int fanSpeed;
extern void homeaxis(int axis);
#ifdef FAN_SOFT_PWM
extern unsigned char fanSpeedSoftPwm;
#endif
#ifdef FILAMENT_SENSOR
extern float filament_width_nominal; //holds the theoretical filament diameter ie., 3.00 or 1.75
extern bool filament_sensor; //indicates that filament sensor readings should control extrusion
extern float filament_width_meas; //holds the filament diameter as accurately measured
extern signed char measurement_delay[]; //ring buffer to delay measurement
extern int delay_index1, delay_index2; //index into ring buffer
extern float delay_dist; //delay distance counter
extern int meas_delay_cm; //delay distance
#endif
#ifdef FWRETRACT
extern bool autoretract_enabled;
extern bool retracted[EXTRUDERS];
extern float retract_length, retract_length_swap, retract_feedrate, retract_zlift;
extern float retract_recover_length, retract_recover_length_swap, retract_recover_feedrate;
#endif
extern unsigned long starttime;
extern unsigned long stoptime;
extern int bowden_length[4];
extern bool is_usb_printing;
extern bool homing_flag;
extern bool temp_cal_active;
extern bool loading_flag;
extern unsigned int usb_printing_counter;
extern unsigned long kicktime;
extern unsigned long total_filament_used;
void save_statistics(unsigned long _total_filament_used, unsigned long _total_print_time);
extern unsigned int heating_status;
extern unsigned int status_number;
extern unsigned int heating_status_counter;
extern bool custom_message;
extern unsigned int custom_message_type;
extern unsigned int custom_message_state;
extern char snmm_filaments_used;
extern unsigned long PingTime;
// Handling multiple extruders pins
extern uint8_t active_extruder;
#ifdef DIGIPOT_I2C
extern void digipot_i2c_set_current( int channel, float current );
extern void digipot_i2c_init();
#endif
#endif
//Long pause
extern int saved_feedmultiply;
extern float HotendTempBckp;
extern int fanSpeedBckp;
extern float pause_lastpos[4];
extern unsigned long pause_time;
extern unsigned long start_pause_print;
extern bool mesh_bed_leveling_flag;
extern bool mesh_bed_run_from_menu;
extern void calculate_volumetric_multipliers();
// Similar to the default Arduino delay function,
// but it keeps the background tasks running.
extern void delay_keep_alive(unsigned int ms);
extern void check_babystep();
extern void long_pause();
#ifdef DIS
void d_setup();
float d_ReadData();
void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_points_num, float shift_x, float shift_y);
#endif
float temp_comp_interpolation(float temperature);
void temp_compensation_apply();
void temp_compensation_start();
void wait_for_heater(long codenum);
// Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
// License: GPL
#ifndef MARLIN_H
#define MARLIN_H
#define FORCE_INLINE __attribute__((always_inline)) inline
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
#include <util/delay.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <avr/interrupt.h>
#include "fastio.h"
#include "Configuration.h"
#include "pins.h"
#ifndef AT90USB
#define HardwareSerial_h // trick to disable the standard HWserial
#endif
#if (ARDUINO >= 100)
# include "Arduino.h"
#else
# include "WProgram.h"
#endif
// Arduino < 1.0.0 does not define this, so we need to do it ourselves
#ifndef analogInputToDigitalPin
# define analogInputToDigitalPin(p) ((p) + A0)
#endif
#ifdef AT90USB
#include "HardwareSerial.h"
#endif
#include "MarlinSerial.h"
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
#include "WString.h"
#ifdef AT90USB
#ifdef BTENABLED
#define MYSERIAL bt
#else
#define MYSERIAL Serial
#endif // BTENABLED
#else
#define MYSERIAL MSerial
#endif
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))
#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y))
#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_PROTOCOLRPGM(x) (serialprintPGM((x)))
#define SERIAL_PROTOCOLLN(x) (MYSERIAL.print(x),MYSERIAL.write('\n'))
#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x)),MYSERIAL.write('\n'))
#define SERIAL_PROTOCOLLNRPGM(x) (serialprintPGM((x)),MYSERIAL.write('\n'))
extern const char errormagic[] PROGMEM;
extern const char echomagic[] PROGMEM;
#define SERIAL_ERROR_START (serialprintPGM(errormagic))
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ERRORRPGM(x) SERIAL_PROTOCOLRPGM(x)
#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
#define SERIAL_ERRORLNRPGM(x) SERIAL_PROTOCOLLNRPGM(x)
#define SERIAL_ECHO_START (serialprintPGM(echomagic))
#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x)
#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ECHORPGM(x) SERIAL_PROTOCOLRPGM(x)
#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
#define SERIAL_ECHOLNRPGM(x) SERIAL_PROTOCOLLNRPGM(x)
#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value)))
void serial_echopair_P(const char *s_P, float v);
void serial_echopair_P(const char *s_P, double v);
void serial_echopair_P(const char *s_P, unsigned long v);
//Things to write to serial from Program memory. Saves 400 to 2k of RAM.
FORCE_INLINE void serialprintPGM(const char *str)
{
char ch=pgm_read_byte(str);
while(ch)
{
MYSERIAL.write(ch);
ch=pgm_read_byte(++str);
}
}
bool is_buffer_empty();
void get_command();
void process_commands();
void ramming();
void manage_inactivity(bool ignore_stepper_queue=false);
#if defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
#define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON)
#define disable_x() { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }
#else
#define enable_x() ;
#define disable_x() ;
#endif
#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
#ifdef Y_DUAL_STEPPER_DRIVERS
#define enable_y() { WRITE(Y_ENABLE_PIN, Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, Y_ENABLE_ON); }
#define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, !Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
#else
#define enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON)
#define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
#endif
#else
#define enable_y() ;
#define disable_y() ;
#endif
#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
#if defined(Z_AXIS_ALWAYS_ON)
#ifdef Z_DUAL_STEPPER_DRIVERS
#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#else
#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
#define disable_z() ;
#endif
#else
#ifdef Z_DUAL_STEPPER_DRIVERS
#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#else
#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#endif
#endif
#else
#define enable_z() ;
#define disable_z() ;
#endif
//#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
//#ifdef Z_DUAL_STEPPER_DRIVERS
//#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
//#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
//#else
//#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
//#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
//#endif
//#else
//#define enable_z() ;
//#define disable_z() ;
//#endif
#if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1)
#define enable_e0() WRITE(E0_ENABLE_PIN, E_ENABLE_ON)
#define disable_e0() WRITE(E0_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e0() /* nothing */
#define disable_e0() /* nothing */
#endif
#if (EXTRUDERS > 1) && defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1)
#define enable_e1() WRITE(E1_ENABLE_PIN, E_ENABLE_ON)
#define disable_e1() WRITE(E1_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e1() /* nothing */
#define disable_e1() /* nothing */
#endif
#if (EXTRUDERS > 2) && defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1)
#define enable_e2() WRITE(E2_ENABLE_PIN, E_ENABLE_ON)
#define disable_e2() WRITE(E2_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e2() /* nothing */
#define disable_e2() /* nothing */
#endif
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
void FlushSerialRequestResend();
void ClearToSend();
void get_coordinates();
void prepare_move();
void kill(const char *full_screen_message = NULL);
void Stop();
bool IsStopped();
//put an ASCII command at the end of the current buffer.
void enquecommand(const char *cmd, bool from_progmem = false);
//put an ASCII command at the end of the current buffer, read from flash
#define enquecommand_P(cmd) enquecommand(cmd, true)
void enquecommand_front(const char *cmd, bool from_progmem = false);
//put an ASCII command at the end of the current buffer, read from flash
#define enquecommand_P(cmd) enquecommand(cmd, true)
#define enquecommand_front_P(cmd) enquecommand_front(cmd, true)
void repeatcommand_front();
// Remove all lines from the command queue.
void cmdqueue_reset();
void prepare_arc_move(char isclockwise);
void clamp_to_software_endstops(float target[3]);
void refresh_cmd_timeout(void);
#ifdef FAST_PWM_FAN
void setPwmFrequency(uint8_t pin, int val);
#endif
#ifndef CRITICAL_SECTION_START
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
#define CRITICAL_SECTION_END SREG = _sreg;
#endif //CRITICAL_SECTION_START
extern float homing_feedrate[];
extern bool axis_relative_modes[];
extern int feedmultiply;
extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all extruders
extern bool volumetric_enabled;
extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
extern float current_position[NUM_AXIS] ;
extern float destination[NUM_AXIS] ;
extern float add_homing[3];
extern float min_pos[3];
extern float max_pos[3];
extern bool axis_known_position[3];
extern float zprobe_zoffset;
extern int fanSpeed;
extern void homeaxis(int axis);
#ifdef FAN_SOFT_PWM
extern unsigned char fanSpeedSoftPwm;
#endif
#ifdef FILAMENT_SENSOR
extern float filament_width_nominal; //holds the theoretical filament diameter ie., 3.00 or 1.75
extern bool filament_sensor; //indicates that filament sensor readings should control extrusion
extern float filament_width_meas; //holds the filament diameter as accurately measured
extern signed char measurement_delay[]; //ring buffer to delay measurement
extern int delay_index1, delay_index2; //index into ring buffer
extern float delay_dist; //delay distance counter
extern int meas_delay_cm; //delay distance
#endif
#ifdef FWRETRACT
extern bool autoretract_enabled;
extern bool retracted[EXTRUDERS];
extern float retract_length, retract_length_swap, retract_feedrate, retract_zlift;
extern float retract_recover_length, retract_recover_length_swap, retract_recover_feedrate;
#endif
extern unsigned long starttime;
extern unsigned long stoptime;
extern int bowden_length[4];
extern bool is_usb_printing;
extern bool homing_flag;
extern bool temp_cal_active;
extern bool loading_flag;
extern unsigned int usb_printing_counter;
extern unsigned long kicktime;
extern unsigned long total_filament_used;
void save_statistics(unsigned long _total_filament_used, unsigned long _total_print_time);
extern unsigned int heating_status;
extern unsigned int status_number;
extern unsigned int heating_status_counter;
extern bool custom_message;
extern unsigned int custom_message_type;
extern unsigned int custom_message_state;
extern char snmm_filaments_used;
extern unsigned long PingTime;
// Handling multiple extruders pins
extern uint8_t active_extruder;
#ifdef DIGIPOT_I2C
extern void digipot_i2c_set_current( int channel, float current );
extern void digipot_i2c_init();
#endif
#endif
//Long pause
extern int saved_feedmultiply;
extern float HotendTempBckp;
extern int fanSpeedBckp;
extern float pause_lastpos[4];
extern unsigned long pause_time;
extern unsigned long start_pause_print;
extern bool mesh_bed_leveling_flag;
extern bool mesh_bed_run_from_menu;
extern void calculate_volumetric_multipliers();
// Similar to the default Arduino delay function,
// but it keeps the background tasks running.
extern void delay_keep_alive(unsigned int ms);
extern void check_babystep();
extern void long_pause();
#ifdef DIS
void d_setup();
float d_ReadData();
void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_points_num, float shift_x, float shift_y);
#endif
float temp_comp_interpolation(float temperature);
void temp_compensation_apply();
void temp_compensation_start();
void wait_for_heater(long codenum);
void serialecho_temperatures();

1626
Firmware/Sd2Card.cpp
View File

File diff suppressed because it is too large Load Diff

522
Firmware/Sd2Card.h
View File

@ -1,262 +1,262 @@
/* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino Sd2Card Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef Sd2Card_h
#define Sd2Card_h
/**
* \file
* \brief Sd2Card class for V2 SD/SDHC cards
*/
#include "SdFatConfig.h"
#include "Sd2PinMap.h"
#include "SdInfo.h"
//------------------------------------------------------------------------------
// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */
uint8_t const SPI_FULL_SPEED = 0;
/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */
uint8_t const SPI_HALF_SPEED = 1;
/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */
uint8_t const SPI_QUARTER_SPEED = 2;
/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */
uint8_t const SPI_EIGHTH_SPEED = 3;
/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */
uint8_t const SPI_SIXTEENTH_SPEED = 4;
//------------------------------------------------------------------------------
/** init timeout ms */
uint16_t const SD_INIT_TIMEOUT = 2000;
/** erase timeout ms */
uint16_t const SD_ERASE_TIMEOUT = 10000;
/** read timeout ms */
uint16_t const SD_READ_TIMEOUT = 300;
/** write time out ms */
uint16_t const SD_WRITE_TIMEOUT = 600;
//------------------------------------------------------------------------------
// SD card errors
/** timeout error for command CMD0 (initialize card in SPI mode) */
uint8_t const SD_CARD_ERROR_CMD0 = 0X1;
/** CMD8 was not accepted - not a valid SD card*/
uint8_t const SD_CARD_ERROR_CMD8 = 0X2;
/** card returned an error response for CMD12 (write stop) */
uint8_t const SD_CARD_ERROR_CMD12 = 0X3;
/** card returned an error response for CMD17 (read block) */
uint8_t const SD_CARD_ERROR_CMD17 = 0X4;
/** card returned an error response for CMD18 (read multiple block) */
uint8_t const SD_CARD_ERROR_CMD18 = 0X5;
/** card returned an error response for CMD24 (write block) */
uint8_t const SD_CARD_ERROR_CMD24 = 0X6;
/** WRITE_MULTIPLE_BLOCKS command failed */
uint8_t const SD_CARD_ERROR_CMD25 = 0X7;
/** card returned an error response for CMD58 (read OCR) */
uint8_t const SD_CARD_ERROR_CMD58 = 0X8;
/** SET_WR_BLK_ERASE_COUNT failed */
uint8_t const SD_CARD_ERROR_ACMD23 = 0X9;
/** ACMD41 initialization process timeout */
uint8_t const SD_CARD_ERROR_ACMD41 = 0XA;
/** card returned a bad CSR version field */
uint8_t const SD_CARD_ERROR_BAD_CSD = 0XB;
/** erase block group command failed */
uint8_t const SD_CARD_ERROR_ERASE = 0XC;
/** card not capable of single block erase */
uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD;
/** Erase sequence timed out */
uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0XE;
/** card returned an error token instead of read data */
uint8_t const SD_CARD_ERROR_READ = 0XF;
/** read CID or CSD failed */
uint8_t const SD_CARD_ERROR_READ_REG = 0X10;
/** timeout while waiting for start of read data */
uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X11;
/** card did not accept STOP_TRAN_TOKEN */
uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X12;
/** card returned an error token as a response to a write operation */
uint8_t const SD_CARD_ERROR_WRITE = 0X13;
/** attempt to write protected block zero */
uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X14; // REMOVE - not used
/** card did not go ready for a multiple block write */
uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X15;
/** card returned an error to a CMD13 status check after a write */
uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X16;
/** timeout occurred during write programming */
uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X17;
/** incorrect rate selected */
uint8_t const SD_CARD_ERROR_SCK_RATE = 0X18;
/** init() not called */
uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0X19;
/** crc check error */
uint8_t const SD_CARD_ERROR_CRC = 0X20;
/** Toshiba FlashAir: iSDIO */
uint8_t const SD_CARD_ERROR_CMD48 = 0x80;
/** Toshiba FlashAir: iSDIO */
uint8_t const SD_CARD_ERROR_CMD49 = 0x81;
//------------------------------------------------------------------------------
// card types
/** Standard capacity V1 SD card */
uint8_t const SD_CARD_TYPE_SD1 = 1;
/** Standard capacity V2 SD card */
uint8_t const SD_CARD_TYPE_SD2 = 2;
/** High Capacity SD card */
uint8_t const SD_CARD_TYPE_SDHC = 3;
/**
* define SOFTWARE_SPI to use bit-bang SPI
*/
//------------------------------------------------------------------------------
#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__))
#define SOFTWARE_SPI
#elif USE_SOFTWARE_SPI
#define SOFTWARE_SPI
#endif // MEGA_SOFT_SPI
//------------------------------------------------------------------------------
// SPI pin definitions - do not edit here - change in SdFatConfig.h
//
#ifndef SOFTWARE_SPI
// hardware pin defs
/** The default chip select pin for the SD card is SS. */
uint8_t const SD_CHIP_SELECT_PIN = SS_PIN;
// The following three pins must not be redefined for hardware SPI.
/** SPI Master Out Slave In pin */
uint8_t const SPI_MOSI_PIN = MOSI_PIN;
/** SPI Master In Slave Out pin */
uint8_t const SPI_MISO_PIN = MISO_PIN;
/** SPI Clock pin */
uint8_t const SPI_SCK_PIN = SCK_PIN;
#else // SOFTWARE_SPI
/** SPI chip select pin */
uint8_t const SD_CHIP_SELECT_PIN = SOFT_SPI_CS_PIN;
/** SPI Master Out Slave In pin */
uint8_t const SPI_MOSI_PIN = SOFT_SPI_MOSI_PIN;
/** SPI Master In Slave Out pin */
uint8_t const SPI_MISO_PIN = SOFT_SPI_MISO_PIN;
/** SPI Clock pin */
uint8_t const SPI_SCK_PIN = SOFT_SPI_SCK_PIN;
#endif // SOFTWARE_SPI
//------------------------------------------------------------------------------
/**
* \class Sd2Card
* \brief Raw access to SD and SDHC flash memory cards.
*/
class Sd2Card {
public:
/** Construct an instance of Sd2Card. */
Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0), flash_air_compatible_(false) {}
uint32_t cardSize();
bool erase(uint32_t firstBlock, uint32_t lastBlock);
bool eraseSingleBlockEnable();
/**
* Set SD error code.
* \param[in] code value for error code.
*/
void error(uint8_t code) {errorCode_ = code;}
/**
* \return error code for last error. See Sd2Card.h for a list of error codes.
*/
int errorCode() const {return errorCode_;}
/** \return error data for last error. */
int errorData() const {return status_;}
/**
* Initialize an SD flash memory card with default clock rate and chip
* select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
*
* \return true for success or false for failure.
*/
bool init(uint8_t sckRateID = SPI_FULL_SPEED,
uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
bool readBlock(uint32_t block, uint8_t* dst);
/**
* Read a card's CID register. The CID contains card identification
* information such as Manufacturer ID, Product name, Product serial
* number and Manufacturing date.
*
* \param[out] cid pointer to area for returned data.
*
* \return true for success or false for failure.
*/
bool readCID(cid_t* cid) {
return readRegister(CMD10, cid);
}
/**
* Read a card's CSD register. The CSD contains Card-Specific Data that
* provides information regarding access to the card's contents.
*
* \param[out] csd pointer to area for returned data.
*
* \return true for success or false for failure.
*/
bool readCSD(csd_t* csd) {
return readRegister(CMD9, csd);
}
bool readData(uint8_t *dst);
bool readStart(uint32_t blockNumber);
bool readStop();
bool setSckRate(uint8_t sckRateID);
/** Return the card type: SD V1, SD V2 or SDHC
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
*/
int type() const {return type_;}
bool writeBlock(uint32_t blockNumber, const uint8_t* src);
bool writeData(const uint8_t* src);
bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
bool writeStop();
// Toshiba FlashAir support
uint8_t readExtMemory(uint8_t mio, uint8_t func, uint32_t addr, uint16_t count, uint8_t* dst);
void setFlashAirCompatible(bool flashAirCompatible) { flash_air_compatible_ = flashAirCompatible; }
bool getFlashAirCompatible() const { return flash_air_compatible_; }
private:
//----------------------------------------------------------------------------
uint8_t chipSelectPin_;
uint8_t errorCode_;
uint8_t spiRate_;
uint8_t status_;
uint8_t type_;
bool flash_air_compatible_;
// private functions
uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
cardCommand(CMD55, 0);
return cardCommand(cmd, arg);
}
uint8_t cardCommand(uint8_t cmd, uint32_t arg);
bool readData(uint8_t* dst, uint16_t count);
bool readRegister(uint8_t cmd, void* buf);
void chipSelectHigh();
void chipSelectLow();
void type(uint8_t value) {type_ = value;}
bool waitNotBusy(uint16_t timeoutMillis);
bool writeData(uint8_t token, const uint8_t* src);
// Toshiba FlashAir support
uint8_t waitStartBlock(void);
uint8_t readExt(uint32_t arg, uint8_t* dst, uint16_t count);
};
#endif // Sd2Card_h
/* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino Sd2Card Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef Sd2Card_h
#define Sd2Card_h
/**
* \file
* \brief Sd2Card class for V2 SD/SDHC cards
*/
#include "SdFatConfig.h"
#include "Sd2PinMap.h"
#include "SdInfo.h"
//------------------------------------------------------------------------------
// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */
uint8_t const SPI_FULL_SPEED = 0;
/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */
uint8_t const SPI_HALF_SPEED = 1;
/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */
uint8_t const SPI_QUARTER_SPEED = 2;
/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */
uint8_t const SPI_EIGHTH_SPEED = 3;
/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */
uint8_t const SPI_SIXTEENTH_SPEED = 4;
//------------------------------------------------------------------------------
/** init timeout ms */
uint16_t const SD_INIT_TIMEOUT = 2000;
/** erase timeout ms */
uint16_t const SD_ERASE_TIMEOUT = 10000;
/** read timeout ms */
uint16_t const SD_READ_TIMEOUT = 300;
/** write time out ms */
uint16_t const SD_WRITE_TIMEOUT = 600;
//------------------------------------------------------------------------------
// SD card errors
/** timeout error for command CMD0 (initialize card in SPI mode) */
uint8_t const SD_CARD_ERROR_CMD0 = 0X1;
/** CMD8 was not accepted - not a valid SD card*/
uint8_t const SD_CARD_ERROR_CMD8 = 0X2;
/** card returned an error response for CMD12 (write stop) */
uint8_t const SD_CARD_ERROR_CMD12 = 0X3;
/** card returned an error response for CMD17 (read block) */
uint8_t const SD_CARD_ERROR_CMD17 = 0X4;
/** card returned an error response for CMD18 (read multiple block) */
uint8_t const SD_CARD_ERROR_CMD18 = 0X5;
/** card returned an error response for CMD24 (write block) */
uint8_t const SD_CARD_ERROR_CMD24 = 0X6;
/** WRITE_MULTIPLE_BLOCKS command failed */
uint8_t const SD_CARD_ERROR_CMD25 = 0X7;
/** card returned an error response for CMD58 (read OCR) */
uint8_t const SD_CARD_ERROR_CMD58 = 0X8;
/** SET_WR_BLK_ERASE_COUNT failed */
uint8_t const SD_CARD_ERROR_ACMD23 = 0X9;
/** ACMD41 initialization process timeout */
uint8_t const SD_CARD_ERROR_ACMD41 = 0XA;
/** card returned a bad CSR version field */
uint8_t const SD_CARD_ERROR_BAD_CSD = 0XB;
/** erase block group command failed */
uint8_t const SD_CARD_ERROR_ERASE = 0XC;
/** card not capable of single block erase */
uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD;
/** Erase sequence timed out */
uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0XE;
/** card returned an error token instead of read data */
uint8_t const SD_CARD_ERROR_READ = 0XF;
/** read CID or CSD failed */
uint8_t const SD_CARD_ERROR_READ_REG = 0X10;
/** timeout while waiting for start of read data */
uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X11;
/** card did not accept STOP_TRAN_TOKEN */
uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X12;
/** card returned an error token as a response to a write operation */
uint8_t const SD_CARD_ERROR_WRITE = 0X13;
/** attempt to write protected block zero */
uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X14; // REMOVE - not used
/** card did not go ready for a multiple block write */
uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X15;
/** card returned an error to a CMD13 status check after a write */
uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X16;
/** timeout occurred during write programming */
uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X17;
/** incorrect rate selected */
uint8_t const SD_CARD_ERROR_SCK_RATE = 0X18;
/** init() not called */
uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0X19;
/** crc check error */
uint8_t const SD_CARD_ERROR_CRC = 0X20;
/** Toshiba FlashAir: iSDIO */
uint8_t const SD_CARD_ERROR_CMD48 = 0x80;
/** Toshiba FlashAir: iSDIO */
uint8_t const SD_CARD_ERROR_CMD49 = 0x81;
//------------------------------------------------------------------------------
// card types
/** Standard capacity V1 SD card */
uint8_t const SD_CARD_TYPE_SD1 = 1;
/** Standard capacity V2 SD card */
uint8_t const SD_CARD_TYPE_SD2 = 2;
/** High Capacity SD card */
uint8_t const SD_CARD_TYPE_SDHC = 3;
/**
* define SOFTWARE_SPI to use bit-bang SPI
*/
//------------------------------------------------------------------------------
#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__))
#define SOFTWARE_SPI
#elif USE_SOFTWARE_SPI
#define SOFTWARE_SPI
#endif // MEGA_SOFT_SPI
//------------------------------------------------------------------------------
// SPI pin definitions - do not edit here - change in SdFatConfig.h
//
#ifndef SOFTWARE_SPI
// hardware pin defs
/** The default chip select pin for the SD card is SS. */
uint8_t const SD_CHIP_SELECT_PIN = SS_PIN;
// The following three pins must not be redefined for hardware SPI.
/** SPI Master Out Slave In pin */
uint8_t const SPI_MOSI_PIN = MOSI_PIN;
/** SPI Master In Slave Out pin */
uint8_t const SPI_MISO_PIN = MISO_PIN;
/** SPI Clock pin */
uint8_t const SPI_SCK_PIN = SCK_PIN;
#else // SOFTWARE_SPI
/** SPI chip select pin */
uint8_t const SD_CHIP_SELECT_PIN = SOFT_SPI_CS_PIN;
/** SPI Master Out Slave In pin */
uint8_t const SPI_MOSI_PIN = SOFT_SPI_MOSI_PIN;
/** SPI Master In Slave Out pin */
uint8_t const SPI_MISO_PIN = SOFT_SPI_MISO_PIN;
/** SPI Clock pin */
uint8_t const SPI_SCK_PIN = SOFT_SPI_SCK_PIN;
#endif // SOFTWARE_SPI
//------------------------------------------------------------------------------
/**
* \class Sd2Card
* \brief Raw access to SD and SDHC flash memory cards.
*/
class Sd2Card {
public:
/** Construct an instance of Sd2Card. */
Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0), flash_air_compatible_(false) {}
uint32_t cardSize();
bool erase(uint32_t firstBlock, uint32_t lastBlock);
bool eraseSingleBlockEnable();
/**
* Set SD error code.
* \param[in] code value for error code.
*/
void error(uint8_t code) {errorCode_ = code;}
/**
* \return error code for last error. See Sd2Card.h for a list of error codes.
*/
int errorCode() const {return errorCode_;}
/** \return error data for last error. */
int errorData() const {return status_;}
/**
* Initialize an SD flash memory card with default clock rate and chip
* select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
*
* \return true for success or false for failure.
*/
bool init(uint8_t sckRateID = SPI_FULL_SPEED,
uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
bool readBlock(uint32_t block, uint8_t* dst);
/**
* Read a card's CID register. The CID contains card identification
* information such as Manufacturer ID, Product name, Product serial
* number and Manufacturing date.
*
* \param[out] cid pointer to area for returned data.
*
* \return true for success or false for failure.
*/
bool readCID(cid_t* cid) {
return readRegister(CMD10, cid);
}
/**
* Read a card's CSD register. The CSD contains Card-Specific Data that
* provides information regarding access to the card's contents.
*
* \param[out] csd pointer to area for returned data.
*
* \return true for success or false for failure.
*/
bool readCSD(csd_t* csd) {
return readRegister(CMD9, csd);
}
bool readData(uint8_t *dst);
bool readStart(uint32_t blockNumber);
bool readStop();
bool setSckRate(uint8_t sckRateID);
/** Return the card type: SD V1, SD V2 or SDHC
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
*/
int type() const {return type_;}
bool writeBlock(uint32_t blockNumber, const uint8_t* src);
bool writeData(const uint8_t* src);
bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
bool writeStop();
// Toshiba FlashAir support
uint8_t readExtMemory(uint8_t mio, uint8_t func, uint32_t addr, uint16_t count, uint8_t* dst);
void setFlashAirCompatible(bool flashAirCompatible) { flash_air_compatible_ = flashAirCompatible; }
bool getFlashAirCompatible() const { return flash_air_compatible_; }
private:
//----------------------------------------------------------------------------
uint8_t chipSelectPin_;
uint8_t errorCode_;
uint8_t spiRate_;
uint8_t status_;
uint8_t type_;
bool flash_air_compatible_;
// private functions
uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
cardCommand(CMD55, 0);
return cardCommand(cmd, arg);
}
uint8_t cardCommand(uint8_t cmd, uint32_t arg);
bool readData(uint8_t* dst, uint16_t count);
bool readRegister(uint8_t cmd, void* buf);
void chipSelectHigh();
void chipSelectLow();
void type(uint8_t value) {type_ = value;}
bool waitNotBusy(uint16_t timeoutMillis);
bool writeData(uint8_t token, const uint8_t* src);
// Toshiba FlashAir support
uint8_t waitStartBlock(void);
uint8_t readExt(uint32_t arg, uint8_t* dst, uint16_t count);
};
#endif // Sd2Card_h
#endif

734
Firmware/Sd2PinMap.h
View File

@ -1,368 +1,368 @@
/* Arduino SdFat Library
* Copyright (C) 2010 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
// Warning this file was generated by a program.
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef Sd2PinMap_h
#define Sd2PinMap_h
#include <avr/io.h>
//------------------------------------------------------------------------------
/** struct for mapping digital pins */
struct pin_map_t {
volatile uint8_t* ddr;
volatile uint8_t* pin;
volatile uint8_t* port;
uint8_t bit;
};
//------------------------------------------------------------------------------
#if defined(__AVR_ATmega1280__)\
|| defined(__AVR_ATmega2560__)
// Mega
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 20; // D1
uint8_t const SCL_PIN = 21; // D0
#undef MOSI_PIN
#undef MISO_PIN
// SPI port
uint8_t const SS_PIN = 53; // B0
uint8_t const MOSI_PIN = 51; // B2
uint8_t const MISO_PIN = 50; // B3
uint8_t const SCK_PIN = 52; // B1
static const pin_map_t digitalPinMap[] = {
{&DDRE, &PINE, &PORTE, 0}, // E0 0
{&DDRE, &PINE, &PORTE, 1}, // E1 1
{&DDRE, &PINE, &PORTE, 4}, // E4 2
{&DDRE, &PINE, &PORTE, 5}, // E5 3
{&DDRG, &PING, &PORTG, 5}, // G5 4
{&DDRE, &PINE, &PORTE, 3}, // E3 5
{&DDRH, &PINH, &PORTH, 3}, // H3 6
{&DDRH, &PINH, &PORTH, 4}, // H4 7
{&DDRH, &PINH, &PORTH, 5}, // H5 8
{&DDRH, &PINH, &PORTH, 6}, // H6 9
{&DDRB, &PINB, &PORTB, 4}, // B4 10
{&DDRB, &PINB, &PORTB, 5}, // B5 11
{&DDRB, &PINB, &PORTB, 6}, // B6 12
{&DDRB, &PINB, &PORTB, 7}, // B7 13
{&DDRJ, &PINJ, &PORTJ, 1}, // J1 14
{&DDRJ, &PINJ, &PORTJ, 0}, // J0 15
{&DDRH, &PINH, &PORTH, 1}, // H1 16
{&DDRH, &PINH, &PORTH, 0}, // H0 17
{&DDRD, &PIND, &PORTD, 3}, // D3 18
{&DDRD, &PIND, &PORTD, 2}, // D2 19
{&DDRD, &PIND, &PORTD, 1}, // D1 20
{&DDRD, &PIND, &PORTD, 0}, // D0 21
{&DDRA, &PINA, &PORTA, 0}, // A0 22
{&DDRA, &PINA, &PORTA, 1}, // A1 23
{&DDRA, &PINA, &PORTA, 2}, // A2 24
{&DDRA, &PINA, &PORTA, 3}, // A3 25
{&DDRA, &PINA, &PORTA, 4}, // A4 26
{&DDRA, &PINA, &PORTA, 5}, // A5 27
{&DDRA, &PINA, &PORTA, 6}, // A6 28
{&DDRA, &PINA, &PORTA, 7}, // A7 29
{&DDRC, &PINC, &PORTC, 7}, // C7 30
{&DDRC, &PINC, &PORTC, 6}, // C6 31
{&DDRC, &PINC, &PORTC, 5}, // C5 32
{&DDRC, &PINC, &PORTC, 4}, // C4 33
{&DDRC, &PINC, &PORTC, 3}, // C3 34
{&DDRC, &PINC, &PORTC, 2}, // C2 35
{&DDRC, &PINC, &PORTC, 1}, // C1 36
{&DDRC, &PINC, &PORTC, 0}, // C0 37
{&DDRD, &PIND, &PORTD, 7}, // D7 38
{&DDRG, &PING, &PORTG, 2}, // G2 39
{&DDRG, &PING, &PORTG, 1}, // G1 40
{&DDRG, &PING, &PORTG, 0}, // G0 41
{&DDRL, &PINL, &PORTL, 7}, // L7 42
{&DDRL, &PINL, &PORTL, 6}, // L6 43
{&DDRL, &PINL, &PORTL, 5}, // L5 44
{&DDRL, &PINL, &PORTL, 4}, // L4 45
{&DDRL, &PINL, &PORTL, 3}, // L3 46
{&DDRL, &PINL, &PORTL, 2}, // L2 47
{&DDRL, &PINL, &PORTL, 1}, // L1 48
{&DDRL, &PINL, &PORTL, 0}, // L0 49
{&DDRB, &PINB, &PORTB, 3}, // B3 50
{&DDRB, &PINB, &PORTB, 2}, // B2 51
{&DDRB, &PINB, &PORTB, 1}, // B1 52
{&DDRB, &PINB, &PORTB, 0}, // B0 53
{&DDRF, &PINF, &PORTF, 0}, // F0 54
{&DDRF, &PINF, &PORTF, 1}, // F1 55
{&DDRF, &PINF, &PORTF, 2}, // F2 56
{&DDRF, &PINF, &PORTF, 3}, // F3 57
{&DDRF, &PINF, &PORTF, 4}, // F4 58
{&DDRF, &PINF, &PORTF, 5}, // F5 59
{&DDRF, &PINF, &PORTF, 6}, // F6 60
{&DDRF, &PINF, &PORTF, 7}, // F7 61
{&DDRK, &PINK, &PORTK, 0}, // K0 62
{&DDRK, &PINK, &PORTK, 1}, // K1 63
{&DDRK, &PINK, &PORTK, 2}, // K2 64
{&DDRK, &PINK, &PORTK, 3}, // K3 65
{&DDRK, &PINK, &PORTK, 4}, // K4 66
{&DDRK, &PINK, &PORTK, 5}, // K5 67
{&DDRK, &PINK, &PORTK, 6}, // K6 68
{&DDRK, &PINK, &PORTK, 7} // K7 69
};
//------------------------------------------------------------------------------
#elif defined(__AVR_ATmega644P__)\
|| defined(__AVR_ATmega644__)\
|| defined(__AVR_ATmega1284P__)
// Sanguino
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 17; // C1
uint8_t const SCL_PIN = 18; // C2
// SPI port
uint8_t const SS_PIN = 4; // B4
uint8_t const MOSI_PIN = 5; // B5
uint8_t const MISO_PIN = 6; // B6
uint8_t const SCK_PIN = 7; // B7
static const pin_map_t digitalPinMap[] = {
{&DDRB, &PINB, &PORTB, 0}, // B0 0
{&DDRB, &PINB, &PORTB, 1}, // B1 1
{&DDRB, &PINB, &PORTB, 2}, // B2 2
{&DDRB, &PINB, &PORTB, 3}, // B3 3
{&DDRB, &PINB, &PORTB, 4}, // B4 4
{&DDRB, &PINB, &PORTB, 5}, // B5 5
{&DDRB, &PINB, &PORTB, 6}, // B6 6
{&DDRB, &PINB, &PORTB, 7}, // B7 7
{&DDRD, &PIND, &PORTD, 0}, // D0 8
{&DDRD, &PIND, &PORTD, 1}, // D1 9
{&DDRD, &PIND, &PORTD, 2}, // D2 10
{&DDRD, &PIND, &PORTD, 3}, // D3 11
{&DDRD, &PIND, &PORTD, 4}, // D4 12
{&DDRD, &PIND, &PORTD, 5}, // D5 13
{&DDRD, &PIND, &PORTD, 6}, // D6 14
{&DDRD, &PIND, &PORTD, 7}, // D7 15
{&DDRC, &PINC, &PORTC, 0}, // C0 16
{&DDRC, &PINC, &PORTC, 1}, // C1 17
{&DDRC, &PINC, &PORTC, 2}, // C2 18
{&DDRC, &PINC, &PORTC, 3}, // C3 19
{&DDRC, &PINC, &PORTC, 4}, // C4 20
{&DDRC, &PINC, &PORTC, 5}, // C5 21
{&DDRC, &PINC, &PORTC, 6}, // C6 22
{&DDRC, &PINC, &PORTC, 7}, // C7 23
{&DDRA, &PINA, &PORTA, 7}, // A7 24
{&DDRA, &PINA, &PORTA, 6}, // A6 25
{&DDRA, &PINA, &PORTA, 5}, // A5 26
{&DDRA, &PINA, &PORTA, 4}, // A4 27
{&DDRA, &PINA, &PORTA, 3}, // A3 28
{&DDRA, &PINA, &PORTA, 2}, // A2 29
{&DDRA, &PINA, &PORTA, 1}, // A1 30
{&DDRA, &PINA, &PORTA, 0} // A0 31
};
//------------------------------------------------------------------------------
#elif defined(__AVR_ATmega32U4__)
// Teensy 2.0
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 6; // D1
uint8_t const SCL_PIN = 5; // D0
// SPI port
uint8_t const SS_PIN = 0; // B0
uint8_t const MOSI_PIN = 2; // B2
uint8_t const MISO_PIN = 3; // B3
uint8_t const SCK_PIN = 1; // B1
static const pin_map_t digitalPinMap[] = {
{&DDRB, &PINB, &PORTB, 0}, // B0 0
{&DDRB, &PINB, &PORTB, 1}, // B1 1
{&DDRB, &PINB, &PORTB, 2}, // B2 2
{&DDRB, &PINB, &PORTB, 3}, // B3 3
{&DDRB, &PINB, &PORTB, 7}, // B7 4
{&DDRD, &PIND, &PORTD, 0}, // D0 5
{&DDRD, &PIND, &PORTD, 1}, // D1 6
{&DDRD, &PIND, &PORTD, 2}, // D2 7
{&DDRD, &PIND, &PORTD, 3}, // D3 8
{&DDRC, &PINC, &PORTC, 6}, // C6 9
{&DDRC, &PINC, &PORTC, 7}, // C7 10
{&DDRD, &PIND, &PORTD, 6}, // D6 11
{&DDRD, &PIND, &PORTD, 7}, // D7 12
{&DDRB, &PINB, &PORTB, 4}, // B4 13
{&DDRB, &PINB, &PORTB, 5}, // B5 14
{&DDRB, &PINB, &PORTB, 6}, // B6 15
{&DDRF, &PINF, &PORTF, 7}, // F7 16
{&DDRF, &PINF, &PORTF, 6}, // F6 17
{&DDRF, &PINF, &PORTF, 5}, // F5 18
{&DDRF, &PINF, &PORTF, 4}, // F4 19
{&DDRF, &PINF, &PORTF, 1}, // F1 20
{&DDRF, &PINF, &PORTF, 0}, // F0 21
{&DDRD, &PIND, &PORTD, 4}, // D4 22
{&DDRD, &PIND, &PORTD, 5}, // D5 23
{&DDRE, &PINE, &PORTE, 6} // E6 24
};
//------------------------------------------------------------------------------
#elif defined(__AVR_AT90USB646__)\
|| defined(__AVR_AT90USB1286__)
// Teensy++ 1.0 & 2.0
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 1; // D1
uint8_t const SCL_PIN = 0; // D0
// SPI port
uint8_t const SS_PIN = 20; // B0
uint8_t const MOSI_PIN = 22; // B2
uint8_t const MISO_PIN = 23; // B3
uint8_t const SCK_PIN = 21; // B1
static const pin_map_t digitalPinMap[] = {
{&DDRD, &PIND, &PORTD, 0}, // D0 0
{&DDRD, &PIND, &PORTD, 1}, // D1 1
{&DDRD, &PIND, &PORTD, 2}, // D2 2
{&DDRD, &PIND, &PORTD, 3}, // D3 3
{&DDRD, &PIND, &PORTD, 4}, // D4 4
{&DDRD, &PIND, &PORTD, 5}, // D5 5
{&DDRD, &PIND, &PORTD, 6}, // D6 6
{&DDRD, &PIND, &PORTD, 7}, // D7 7
{&DDRE, &PINE, &PORTE, 0}, // E0 8
{&DDRE, &PINE, &PORTE, 1}, // E1 9
{&DDRC, &PINC, &PORTC, 0}, // C0 10
{&DDRC, &PINC, &PORTC, 1}, // C1 11
{&DDRC, &PINC, &PORTC, 2}, // C2 12
{&DDRC, &PINC, &PORTC, 3}, // C3 13
{&DDRC, &PINC, &PORTC, 4}, // C4 14
{&DDRC, &PINC, &PORTC, 5}, // C5 15
{&DDRC, &PINC, &PORTC, 6}, // C6 16
{&DDRC, &PINC, &PORTC, 7}, // C7 17
{&DDRE, &PINE, &PORTE, 6}, // E6 18
{&DDRE, &PINE, &PORTE, 7}, // E7 19
{&DDRB, &PINB, &PORTB, 0}, // B0 20
{&DDRB, &PINB, &PORTB, 1}, // B1 21
{&DDRB, &PINB, &PORTB, 2}, // B2 22
{&DDRB, &PINB, &PORTB, 3}, // B3 23
{&DDRB, &PINB, &PORTB, 4}, // B4 24
{&DDRB, &PINB, &PORTB, 5}, // B5 25
{&DDRB, &PINB, &PORTB, 6}, // B6 26
{&DDRB, &PINB, &PORTB, 7}, // B7 27
{&DDRA, &PINA, &PORTA, 0}, // A0 28
{&DDRA, &PINA, &PORTA, 1}, // A1 29
{&DDRA, &PINA, &PORTA, 2}, // A2 30
{&DDRA, &PINA, &PORTA, 3}, // A3 31
{&DDRA, &PINA, &PORTA, 4}, // A4 32
{&DDRA, &PINA, &PORTA, 5}, // A5 33
{&DDRA, &PINA, &PORTA, 6}, // A6 34
{&DDRA, &PINA, &PORTA, 7}, // A7 35
{&DDRE, &PINE, &PORTE, 4}, // E4 36
{&DDRE, &PINE, &PORTE, 5}, // E5 37
{&DDRF, &PINF, &PORTF, 0}, // F0 38
{&DDRF, &PINF, &PORTF, 1}, // F1 39
{&DDRF, &PINF, &PORTF, 2}, // F2 40
{&DDRF, &PINF, &PORTF, 3}, // F3 41
{&DDRF, &PINF, &PORTF, 4}, // F4 42
{&DDRF, &PINF, &PORTF, 5}, // F5 43
{&DDRF, &PINF, &PORTF, 6}, // F6 44
{&DDRF, &PINF, &PORTF, 7} // F7 45
};
//------------------------------------------------------------------------------
#elif defined(__AVR_ATmega168__)\
||defined(__AVR_ATmega168P__)\
||defined(__AVR_ATmega328P__)
// 168 and 328 Arduinos
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 18; // C4
uint8_t const SCL_PIN = 19; // C5
// SPI port
uint8_t const SS_PIN = 10; // B2
uint8_t const MOSI_PIN = 11; // B3
uint8_t const MISO_PIN = 12; // B4
uint8_t const SCK_PIN = 13; // B5
static const pin_map_t digitalPinMap[] = {
{&DDRD, &PIND, &PORTD, 0}, // D0 0
{&DDRD, &PIND, &PORTD, 1}, // D1 1
{&DDRD, &PIND, &PORTD, 2}, // D2 2
{&DDRD, &PIND, &PORTD, 3}, // D3 3
{&DDRD, &PIND, &PORTD, 4}, // D4 4
{&DDRD, &PIND, &PORTD, 5}, // D5 5
{&DDRD, &PIND, &PORTD, 6}, // D6 6
{&DDRD, &PIND, &PORTD, 7}, // D7 7
{&DDRB, &PINB, &PORTB, 0}, // B0 8
{&DDRB, &PINB, &PORTB, 1}, // B1 9
{&DDRB, &PINB, &PORTB, 2}, // B2 10
{&DDRB, &PINB, &PORTB, 3}, // B3 11
{&DDRB, &PINB, &PORTB, 4}, // B4 12
{&DDRB, &PINB, &PORTB, 5}, // B5 13
{&DDRC, &PINC, &PORTC, 0}, // C0 14
{&DDRC, &PINC, &PORTC, 1}, // C1 15
{&DDRC, &PINC, &PORTC, 2}, // C2 16
{&DDRC, &PINC, &PORTC, 3}, // C3 17
{&DDRC, &PINC, &PORTC, 4}, // C4 18
{&DDRC, &PINC, &PORTC, 5} // C5 19
};
#else // defined(__AVR_ATmega1280__)
#error unknown chip
#endif // defined(__AVR_ATmega1280__)
//------------------------------------------------------------------------------
static const uint8_t digitalPinCount = sizeof(digitalPinMap)/sizeof(pin_map_t);
uint8_t badPinNumber(void)
__attribute__((error("Pin number is too large or not a constant")));
static inline __attribute__((always_inline))
bool getPinMode(uint8_t pin) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;
} else {
return badPinNumber();
}
}
static inline __attribute__((always_inline))
void setPinMode(uint8_t pin, uint8_t mode) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
if (mode) {
*digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit;
} else {
*digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit);
}
} else {
badPinNumber();
}
}
static inline __attribute__((always_inline))
bool fastDigitalRead(uint8_t pin) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;
} else {
return badPinNumber();
}
}
static inline __attribute__((always_inline))
void fastDigitalWrite(uint8_t pin, uint8_t value) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
if (value) {
*digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit;
} else {
*digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit);
}
} else {
badPinNumber();
}
}
#endif // Sd2PinMap_h
/* Arduino SdFat Library
* Copyright (C) 2010 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
// Warning this file was generated by a program.
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef Sd2PinMap_h
#define Sd2PinMap_h
#include <avr/io.h>
//------------------------------------------------------------------------------
/** struct for mapping digital pins */
struct pin_map_t {
volatile uint8_t* ddr;
volatile uint8_t* pin;
volatile uint8_t* port;
uint8_t bit;
};
//------------------------------------------------------------------------------
#if defined(__AVR_ATmega1280__)\
|| defined(__AVR_ATmega2560__)
// Mega
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 20; // D1
uint8_t const SCL_PIN = 21; // D0
#undef MOSI_PIN
#undef MISO_PIN
// SPI port
uint8_t const SS_PIN = 53; // B0
uint8_t const MOSI_PIN = 51; // B2
uint8_t const MISO_PIN = 50; // B3
uint8_t const SCK_PIN = 52; // B1
static const pin_map_t digitalPinMap[] = {
{&DDRE, &PINE, &PORTE, 0}, // E0 0
{&DDRE, &PINE, &PORTE, 1}, // E1 1
{&DDRE, &PINE, &PORTE, 4}, // E4 2
{&DDRE, &PINE, &PORTE, 5}, // E5 3
{&DDRG, &PING, &PORTG, 5}, // G5 4
{&DDRE, &PINE, &PORTE, 3}, // E3 5
{&DDRH, &PINH, &PORTH, 3}, // H3 6
{&DDRH, &PINH, &PORTH, 4}, // H4 7
{&DDRH, &PINH, &PORTH, 5}, // H5 8
{&DDRH, &PINH, &PORTH, 6}, // H6 9
{&DDRB, &PINB, &PORTB, 4}, // B4 10
{&DDRB, &PINB, &PORTB, 5}, // B5 11
{&DDRB, &PINB, &PORTB, 6}, // B6 12
{&DDRB, &PINB, &PORTB, 7}, // B7 13
{&DDRJ, &PINJ, &PORTJ, 1}, // J1 14
{&DDRJ, &PINJ, &PORTJ, 0}, // J0 15
{&DDRH, &PINH, &PORTH, 1}, // H1 16
{&DDRH, &PINH, &PORTH, 0}, // H0 17
{&DDRD, &PIND, &PORTD, 3}, // D3 18
{&DDRD, &PIND, &PORTD, 2}, // D2 19
{&DDRD, &PIND, &PORTD, 1}, // D1 20
{&DDRD, &PIND, &PORTD, 0}, // D0 21
{&DDRA, &PINA, &PORTA, 0}, // A0 22
{&DDRA, &PINA, &PORTA, 1}, // A1 23
{&DDRA, &PINA, &PORTA, 2}, // A2 24
{&DDRA, &PINA, &PORTA, 3}, // A3 25
{&DDRA, &PINA, &PORTA, 4}, // A4 26
{&DDRA, &PINA, &PORTA, 5}, // A5 27
{&DDRA, &PINA, &PORTA, 6}, // A6 28
{&DDRA, &PINA, &PORTA, 7}, // A7 29
{&DDRC, &PINC, &PORTC, 7}, // C7 30
{&DDRC, &PINC, &PORTC, 6}, // C6 31
{&DDRC, &PINC, &PORTC, 5}, // C5 32
{&DDRC, &PINC, &PORTC, 4}, // C4 33
{&DDRC, &PINC, &PORTC, 3}, // C3 34
{&DDRC, &PINC, &PORTC, 2}, // C2 35
{&DDRC, &PINC, &PORTC, 1}, // C1 36
{&DDRC, &PINC, &PORTC, 0}, // C0 37
{&DDRD, &PIND, &PORTD, 7}, // D7 38
{&DDRG, &PING, &PORTG, 2}, // G2 39
{&DDRG, &PING, &PORTG, 1}, // G1 40
{&DDRG, &PING, &PORTG, 0}, // G0 41
{&DDRL, &PINL, &PORTL, 7}, // L7 42
{&DDRL, &PINL, &PORTL, 6}, // L6 43
{&DDRL, &PINL, &PORTL, 5}, // L5 44
{&DDRL, &PINL, &PORTL, 4}, // L4 45
{&DDRL, &PINL, &PORTL, 3}, // L3 46
{&DDRL, &PINL, &PORTL, 2}, // L2 47
{&DDRL, &PINL, &PORTL, 1}, // L1 48
{&DDRL, &PINL, &PORTL, 0}, // L0 49
{&DDRB, &PINB, &PORTB, 3}, // B3 50
{&DDRB, &PINB, &PORTB, 2}, // B2 51
{&DDRB, &PINB, &PORTB, 1}, // B1 52
{&DDRB, &PINB, &PORTB, 0}, // B0 53
{&DDRF, &PINF, &PORTF, 0}, // F0 54
{&DDRF, &PINF, &PORTF, 1}, // F1 55
{&DDRF, &PINF, &PORTF, 2}, // F2 56
{&DDRF, &PINF, &PORTF, 3}, // F3 57
{&DDRF, &PINF, &PORTF, 4}, // F4 58
{&DDRF, &PINF, &PORTF, 5}, // F5 59
{&DDRF, &PINF, &PORTF, 6}, // F6 60
{&DDRF, &PINF, &PORTF, 7}, // F7 61
{&DDRK, &PINK, &PORTK, 0}, // K0 62
{&DDRK, &PINK, &PORTK, 1}, // K1 63
{&DDRK, &PINK, &PORTK, 2}, // K2 64
{&DDRK, &PINK, &PORTK, 3}, // K3 65
{&DDRK, &PINK, &PORTK, 4}, // K4 66
{&DDRK, &PINK, &PORTK, 5}, // K5 67
{&DDRK, &PINK, &PORTK, 6}, // K6 68
{&DDRK, &PINK, &PORTK, 7} // K7 69
};
//------------------------------------------------------------------------------
#elif defined(__AVR_ATmega644P__)\
|| defined(__AVR_ATmega644__)\
|| defined(__AVR_ATmega1284P__)
// Sanguino
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 17; // C1
uint8_t const SCL_PIN = 18; // C2
// SPI port
uint8_t const SS_PIN = 4; // B4
uint8_t const MOSI_PIN = 5; // B5
uint8_t const MISO_PIN = 6; // B6
uint8_t const SCK_PIN = 7; // B7
static const pin_map_t digitalPinMap[] = {
{&DDRB, &PINB, &PORTB, 0}, // B0 0
{&DDRB, &PINB, &PORTB, 1}, // B1 1
{&DDRB, &PINB, &PORTB, 2}, // B2 2
{&DDRB, &PINB, &PORTB, 3}, // B3 3
{&DDRB, &PINB, &PORTB, 4}, // B4 4
{&DDRB, &PINB, &PORTB, 5}, // B5 5
{&DDRB, &PINB, &PORTB, 6}, // B6 6
{&DDRB, &PINB, &PORTB, 7}, // B7 7
{&DDRD, &PIND, &PORTD, 0}, // D0 8
{&DDRD, &PIND, &PORTD, 1}, // D1 9
{&DDRD, &PIND, &PORTD, 2}, // D2 10
{&DDRD, &PIND, &PORTD, 3}, // D3 11
{&DDRD, &PIND, &PORTD, 4}, // D4 12
{&DDRD, &PIND, &PORTD, 5}, // D5 13
{&DDRD, &PIND, &PORTD, 6}, // D6 14
{&DDRD, &PIND, &PORTD, 7}, // D7 15
{&DDRC, &PINC, &PORTC, 0}, // C0 16
{&DDRC, &PINC, &PORTC, 1}, // C1 17
{&DDRC, &PINC, &PORTC, 2}, // C2 18
{&DDRC, &PINC, &PORTC, 3}, // C3 19
{&DDRC, &PINC, &PORTC, 4}, // C4 20
{&DDRC, &PINC, &PORTC, 5}, // C5 21
{&DDRC, &PINC, &PORTC, 6}, // C6 22
{&DDRC, &PINC, &PORTC, 7}, // C7 23
{&DDRA, &PINA, &PORTA, 7}, // A7 24
{&DDRA, &PINA, &PORTA, 6}, // A6 25
{&DDRA, &PINA, &PORTA, 5}, // A5 26
{&DDRA, &PINA, &PORTA, 4}, // A4 27
{&DDRA, &PINA, &PORTA, 3}, // A3 28
{&DDRA, &PINA, &PORTA, 2}, // A2 29
{&DDRA, &PINA, &PORTA, 1}, // A1 30
{&DDRA, &PINA, &PORTA, 0} // A0 31
};
//------------------------------------------------------------------------------
#elif defined(__AVR_ATmega32U4__)
// Teensy 2.0
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 6; // D1
uint8_t const SCL_PIN = 5; // D0
// SPI port
uint8_t const SS_PIN = 0; // B0
uint8_t const MOSI_PIN = 2; // B2
uint8_t const MISO_PIN = 3; // B3
uint8_t const SCK_PIN = 1; // B1
static const pin_map_t digitalPinMap[] = {
{&DDRB, &PINB, &PORTB, 0}, // B0 0
{&DDRB, &PINB, &PORTB, 1}, // B1 1
{&DDRB, &PINB, &PORTB, 2}, // B2 2
{&DDRB, &PINB, &PORTB, 3}, // B3 3
{&DDRB, &PINB, &PORTB, 7}, // B7 4
{&DDRD, &PIND, &PORTD, 0}, // D0 5
{&DDRD, &PIND, &PORTD, 1}, // D1 6
{&DDRD, &PIND, &PORTD, 2}, // D2 7
{&DDRD, &PIND, &PORTD, 3}, // D3 8
{&DDRC, &PINC, &PORTC, 6}, // C6 9
{&DDRC, &PINC, &PORTC, 7}, // C7 10
{&DDRD, &PIND, &PORTD, 6}, // D6 11
{&DDRD, &PIND, &PORTD, 7}, // D7 12
{&DDRB, &PINB, &PORTB, 4}, // B4 13
{&DDRB, &PINB, &PORTB, 5}, // B5 14
{&DDRB, &PINB, &PORTB, 6}, // B6 15
{&DDRF, &PINF, &PORTF, 7}, // F7 16
{&DDRF, &PINF, &PORTF, 6}, // F6 17
{&DDRF, &PINF, &PORTF, 5}, // F5 18
{&DDRF, &PINF, &PORTF, 4}, // F4 19
{&DDRF, &PINF, &PORTF, 1}, // F1 20
{&DDRF, &PINF, &PORTF, 0}, // F0 21
{&DDRD, &PIND, &PORTD, 4}, // D4 22
{&DDRD, &PIND, &PORTD, 5}, // D5 23
{&DDRE, &PINE, &PORTE, 6} // E6 24
};
//------------------------------------------------------------------------------
#elif defined(__AVR_AT90USB646__)\
|| defined(__AVR_AT90USB1286__)
// Teensy++ 1.0 & 2.0
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 1; // D1
uint8_t const SCL_PIN = 0; // D0
// SPI port
uint8_t const SS_PIN = 20; // B0
uint8_t const MOSI_PIN = 22; // B2
uint8_t const MISO_PIN = 23; // B3
uint8_t const SCK_PIN = 21; // B1
static const pin_map_t digitalPinMap[] = {
{&DDRD, &PIND, &PORTD, 0}, // D0 0
{&DDRD, &PIND, &PORTD, 1}, // D1 1
{&DDRD, &PIND, &PORTD, 2}, // D2 2
{&DDRD, &PIND, &PORTD, 3}, // D3 3
{&DDRD, &PIND, &PORTD, 4}, // D4 4
{&DDRD, &PIND, &PORTD, 5}, // D5 5
{&DDRD, &PIND, &PORTD, 6}, // D6 6
{&DDRD, &PIND, &PORTD, 7}, // D7 7
{&DDRE, &PINE, &PORTE, 0}, // E0 8
{&DDRE, &PINE, &PORTE, 1}, // E1 9
{&DDRC, &PINC, &PORTC, 0}, // C0 10
{&DDRC, &PINC, &PORTC, 1}, // C1 11
{&DDRC, &PINC, &PORTC, 2}, // C2 12
{&DDRC, &PINC, &PORTC, 3}, // C3 13
{&DDRC, &PINC, &PORTC, 4}, // C4 14
{&DDRC, &PINC, &PORTC, 5}, // C5 15
{&DDRC, &PINC, &PORTC, 6}, // C6 16
{&DDRC, &PINC, &PORTC, 7}, // C7 17
{&DDRE, &PINE, &PORTE, 6}, // E6 18
{&DDRE, &PINE, &PORTE, 7}, // E7 19
{&DDRB, &PINB, &PORTB, 0}, // B0 20
{&DDRB, &PINB, &PORTB, 1}, // B1 21
{&DDRB, &PINB, &PORTB, 2}, // B2 22
{&DDRB, &PINB, &PORTB, 3}, // B3 23
{&DDRB, &PINB, &PORTB, 4}, // B4 24
{&DDRB, &PINB, &PORTB, 5}, // B5 25
{&DDRB, &PINB, &PORTB, 6}, // B6 26
{&DDRB, &PINB, &PORTB, 7}, // B7 27
{&DDRA, &PINA, &PORTA, 0}, // A0 28
{&DDRA, &PINA, &PORTA, 1}, // A1 29
{&DDRA, &PINA, &PORTA, 2}, // A2 30
{&DDRA, &PINA, &PORTA, 3}, // A3 31
{&DDRA, &PINA, &PORTA, 4}, // A4 32
{&DDRA, &PINA, &PORTA, 5}, // A5 33
{&DDRA, &PINA, &PORTA, 6}, // A6 34
{&DDRA, &PINA, &PORTA, 7}, // A7 35
{&DDRE, &PINE, &PORTE, 4}, // E4 36
{&DDRE, &PINE, &PORTE, 5}, // E5 37
{&DDRF, &PINF, &PORTF, 0}, // F0 38
{&DDRF, &PINF, &PORTF, 1}, // F1 39
{&DDRF, &PINF, &PORTF, 2}, // F2 40
{&DDRF, &PINF, &PORTF, 3}, // F3 41
{&DDRF, &PINF, &PORTF, 4}, // F4 42
{&DDRF, &PINF, &PORTF, 5}, // F5 43
{&DDRF, &PINF, &PORTF, 6}, // F6 44
{&DDRF, &PINF, &PORTF, 7} // F7 45
};
//------------------------------------------------------------------------------
#elif defined(__AVR_ATmega168__)\
||defined(__AVR_ATmega168P__)\
||defined(__AVR_ATmega328P__)
// 168 and 328 Arduinos
// Two Wire (aka I2C) ports
uint8_t const SDA_PIN = 18; // C4
uint8_t const SCL_PIN = 19; // C5
// SPI port
uint8_t const SS_PIN = 10; // B2
uint8_t const MOSI_PIN = 11; // B3
uint8_t const MISO_PIN = 12; // B4
uint8_t const SCK_PIN = 13; // B5
static const pin_map_t digitalPinMap[] = {
{&DDRD, &PIND, &PORTD, 0}, // D0 0
{&DDRD, &PIND, &PORTD, 1}, // D1 1
{&DDRD, &PIND, &PORTD, 2}, // D2 2
{&DDRD, &PIND, &PORTD, 3}, // D3 3
{&DDRD, &PIND, &PORTD, 4}, // D4 4
{&DDRD, &PIND, &PORTD, 5}, // D5 5
{&DDRD, &PIND, &PORTD, 6}, // D6 6
{&DDRD, &PIND, &PORTD, 7}, // D7 7
{&DDRB, &PINB, &PORTB, 0}, // B0 8
{&DDRB, &PINB, &PORTB, 1}, // B1 9
{&DDRB, &PINB, &PORTB, 2}, // B2 10
{&DDRB, &PINB, &PORTB, 3}, // B3 11
{&DDRB, &PINB, &PORTB, 4}, // B4 12
{&DDRB, &PINB, &PORTB, 5}, // B5 13
{&DDRC, &PINC, &PORTC, 0}, // C0 14
{&DDRC, &PINC, &PORTC, 1}, // C1 15
{&DDRC, &PINC, &PORTC, 2}, // C2 16
{&DDRC, &PINC, &PORTC, 3}, // C3 17
{&DDRC, &PINC, &PORTC, 4}, // C4 18
{&DDRC, &PINC, &PORTC, 5} // C5 19
};
#else // defined(__AVR_ATmega1280__)
#error unknown chip
#endif // defined(__AVR_ATmega1280__)
//------------------------------------------------------------------------------
static const uint8_t digitalPinCount = sizeof(digitalPinMap)/sizeof(pin_map_t);
uint8_t badPinNumber(void)
__attribute__((error("Pin number is too large or not a constant")));
static inline __attribute__((always_inline))
bool getPinMode(uint8_t pin) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;
} else {
return badPinNumber();
}
}
static inline __attribute__((always_inline))
void setPinMode(uint8_t pin, uint8_t mode) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
if (mode) {
*digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit;
} else {
*digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit);
}
} else {
badPinNumber();
}
}
static inline __attribute__((always_inline))
bool fastDigitalRead(uint8_t pin) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;
} else {
return badPinNumber();
}
}
static inline __attribute__((always_inline))
void fastDigitalWrite(uint8_t pin, uint8_t value) {
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
if (value) {
*digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit;
} else {
*digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit);
}
} else {
badPinNumber();
}
}
#endif // Sd2PinMap_h
#endif

100
Firmware/SdFatUtil.h
View File

@ -1,51 +1,51 @@
/* Arduino SdFat Library
* Copyright (C) 2008 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef SdFatUtil_h
#define SdFatUtil_h
/**
* \file
* \brief Useful utility functions.
*/
#include "Marlin.h"
#include "MarlinSerial.h"
/** Store and print a string in flash memory.*/
#define PgmPrint(x) SerialPrint_P(PSTR(x))
/** Store and print a string in flash memory followed by a CR/LF.*/
#define PgmPrintln(x) SerialPrintln_P(PSTR(x))
namespace SdFatUtil {
int FreeRam();
void print_P( PGM_P str);
void println_P( PGM_P str);
void SerialPrint_P(PGM_P str);
void SerialPrintln_P(PGM_P str);
void set_stack_guard();
bool test_stack_integrity();
uint32_t get_stack_guard_test_value();
}
using namespace SdFatUtil; // NOLINT
#endif // #define SdFatUtil_h
/* Arduino SdFat Library
* Copyright (C) 2008 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef SdFatUtil_h
#define SdFatUtil_h
/**
* \file
* \brief Useful utility functions.
*/
#include "Marlin.h"
#include "MarlinSerial.h"
/** Store and print a string in flash memory.*/
#define PgmPrint(x) SerialPrint_P(PSTR(x))
/** Store and print a string in flash memory followed by a CR/LF.*/
#define PgmPrintln(x) SerialPrintln_P(PSTR(x))
namespace SdFatUtil {
int FreeRam();
void print_P( PGM_P str);
void println_P( PGM_P str);
void SerialPrint_P(PGM_P str);
void SerialPrintln_P(PGM_P str);
void set_stack_guard();
bool test_stack_integrity();
uint32_t get_stack_guard_test_value();
}
using namespace SdFatUtil; // NOLINT
#endif // #define SdFatUtil_h
#endif

190
Firmware/SdFile.cpp
View File

@ -1,95 +1,95 @@
/* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#include "SdFile.h"
/** Create a file object and open it in the current working directory.
*
* \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
*
* \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
* OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
*/
SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) {
}
//------------------------------------------------------------------------------
/** Write data to an open file.
*
* \note Data is moved to the cache but may not be written to the
* storage device until sync() is called.
*
* \param[in] buf Pointer to the location of the data to be written.
*
* \param[in] nbyte Number of bytes to write.
*
* \return For success write() returns the number of bytes written, always
* \a nbyte. If an error occurs, write() returns -1. Possible errors
* include write() is called before a file has been opened, write is called
* for a read-only file, device is full, a corrupt file system or an I/O error.
*
*/
int16_t SdFile::write(const void* buf, uint16_t nbyte) {
return SdBaseFile::write(buf, nbyte);
}
//------------------------------------------------------------------------------
/** Write a byte to a file. Required by the Arduino Print class.
* \param[in] b the byte to be written.
* Use writeError to check for errors.
*/
#if ARDUINO >= 100
size_t SdFile::write(uint8_t b)
{
return SdBaseFile::write(&b, 1);
}
#else
void SdFile::write(uint8_t b)
{
SdBaseFile::write(&b, 1);
}
#endif
//------------------------------------------------------------------------------
/** Write a string to a file. Used by the Arduino Print class.
* \param[in] str Pointer to the string.
* Use writeError to check for errors.
*/
void SdFile::write(const char* str) {
SdBaseFile::write(str, strlen(str));
}
//------------------------------------------------------------------------------
/** Write a PROGMEM string to a file.
* \param[in] str Pointer to the PROGMEM string.
* Use writeError to check for errors.
*/
void SdFile::write_P(PGM_P str) {
for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c);
}
//------------------------------------------------------------------------------
/** Write a PROGMEM string followed by CR/LF to a file.
* \param[in] str Pointer to the PROGMEM string.
* Use writeError to check for errors.
*/
void SdFile::writeln_P(PGM_P str) {
write_P(str);
write_P(PSTR("\r\n"));
}
#endif
/* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#include "SdFile.h"
/** Create a file object and open it in the current working directory.
*
* \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
*
* \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
* OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
*/
SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) {
}
//------------------------------------------------------------------------------
/** Write data to an open file.
*
* \note Data is moved to the cache but may not be written to the
* storage device until sync() is called.
*
* \param[in] buf Pointer to the location of the data to be written.
*
* \param[in] nbyte Number of bytes to write.
*
* \return For success write() returns the number of bytes written, always
* \a nbyte. If an error occurs, write() returns -1. Possible errors
* include write() is called before a file has been opened, write is called
* for a read-only file, device is full, a corrupt file system or an I/O error.
*
*/
int16_t SdFile::write(const void* buf, uint16_t nbyte) {
return SdBaseFile::write(buf, nbyte);
}
//------------------------------------------------------------------------------
/** Write a byte to a file. Required by the Arduino Print class.
* \param[in] b the byte to be written.
* Use writeError to check for errors.
*/
#if ARDUINO >= 100
size_t SdFile::write(uint8_t b)
{
return SdBaseFile::write(&b, 1);
}
#else
void SdFile::write(uint8_t b)
{
SdBaseFile::write(&b, 1);
}
#endif
//------------------------------------------------------------------------------
/** Write a string to a file. Used by the Arduino Print class.
* \param[in] str Pointer to the string.
* Use writeError to check for errors.
*/
void SdFile::write(const char* str) {
SdBaseFile::write(str, strlen(str));
}
//------------------------------------------------------------------------------
/** Write a PROGMEM string to a file.
* \param[in] str Pointer to the PROGMEM string.
* Use writeError to check for errors.
*/
void SdFile::write_P(PGM_P str) {
for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c);
}
//------------------------------------------------------------------------------
/** Write a PROGMEM string followed by CR/LF to a file.
* \param[in] str Pointer to the PROGMEM string.
* Use writeError to check for errors.
*/
void SdFile::writeln_P(PGM_P str) {
write_P(str);
write_P(PSTR("\r\n"));
}
#endif

570
Firmware/SdInfo.h
View File

@ -1,286 +1,286 @@
/* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino Sd2Card Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef SdInfo_h
#define SdInfo_h
#include <stdint.h>
// Based on the document:
//
// SD Specifications
// Part 1
// Physical Layer
// Simplified Specification
// Version 3.01
// May 18, 2010
//
// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
//------------------------------------------------------------------------------
// SD card commands
/** GO_IDLE_STATE - init card in spi mode if CS low */
uint8_t const CMD0 = 0X00;
/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/
uint8_t const CMD8 = 0X08;
/** SEND_CSD - read the Card Specific Data (CSD register) */
uint8_t const CMD9 = 0X09;
/** SEND_CID - read the card identification information (CID register) */
uint8_t const CMD10 = 0X0A;
/** STOP_TRANSMISSION - end multiple block read sequence */
uint8_t const CMD12 = 0X0C;
/** SEND_STATUS - read the card status register */
uint8_t const CMD13 = 0X0D;
/** READ_SINGLE_BLOCK - read a single data block from the card */
uint8_t const CMD17 = 0X11;
/** READ_MULTIPLE_BLOCK - read a multiple data blocks from the card */
uint8_t const CMD18 = 0X12;
/** WRITE_BLOCK - write a single data block to the card */
uint8_t const CMD24 = 0X18;
/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */
uint8_t const CMD25 = 0X19;
/** ERASE_WR_BLK_START - sets the address of the first block to be erased */
uint8_t const CMD32 = 0X20;
/** ERASE_WR_BLK_END - sets the address of the last block of the continuous
range to be erased*/
uint8_t const CMD33 = 0X21;
/** ERASE - erase all previously selected blocks */
uint8_t const CMD38 = 0X26;
/** Toshiba FlashAir: iSDIO */
uint8_t const CMD48 = 0x30;
/** Toshiba FlashAir: iSDIO */
uint8_t const CMD49 = 0x31;
/** APP_CMD - escape for application specific command */
uint8_t const CMD55 = 0X37;
/** READ_OCR - read the OCR register of a card */
uint8_t const CMD58 = 0X3A;
/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be
pre-erased before writing */
uint8_t const ACMD23 = 0X17;
/** SD_SEND_OP_COMD - Sends host capacity support information and
activates the card's initialization process */
uint8_t const ACMD41 = 0X29;
//------------------------------------------------------------------------------
/** status for card in the ready state */
uint8_t const R1_READY_STATE = 0X00;
/** status for card in the idle state */
uint8_t const R1_IDLE_STATE = 0X01;
/** status bit for illegal command */
uint8_t const R1_ILLEGAL_COMMAND = 0X04;
/** start data token for read or write single block*/
uint8_t const DATA_START_BLOCK = 0XFE;
/** stop token for write multiple blocks*/
uint8_t const STOP_TRAN_TOKEN = 0XFD;
/** start data token for write multiple blocks*/
uint8_t const WRITE_MULTIPLE_TOKEN = 0XFC;
/** mask for data response tokens after a write block operation */
uint8_t const DATA_RES_MASK = 0X1F;
/** write data accepted token */
uint8_t const DATA_RES_ACCEPTED = 0X05;
//------------------------------------------------------------------------------
/** Card IDentification (CID) register */
typedef struct CID {
// byte 0
/** Manufacturer ID */
unsigned char mid;
// byte 1-2
/** OEM/Application ID */
char oid[2];
// byte 3-7
/** Product name */
char pnm[5];
// byte 8
/** Product revision least significant digit */
unsigned char prv_m : 4;
/** Product revision most significant digit */
unsigned char prv_n : 4;
// byte 9-12
/** Product serial number */
uint32_t psn;
// byte 13
/** Manufacturing date year low digit */
unsigned char mdt_year_high : 4;
/** not used */
unsigned char reserved : 4;
// byte 14
/** Manufacturing date month */
unsigned char mdt_month : 4;
/** Manufacturing date year low digit */
unsigned char mdt_year_low :4;
// byte 15
/** not used always 1 */
unsigned char always1 : 1;
/** CRC7 checksum */
unsigned char crc : 7;
}cid_t;
//------------------------------------------------------------------------------
/** CSD for version 1.00 cards */
typedef struct CSDV1 {
// byte 0
unsigned char reserved1 : 6;
unsigned char csd_ver : 2;
// byte 1
unsigned char taac;
// byte 2
unsigned char nsac;
// byte 3
unsigned char tran_speed;
// byte 4
unsigned char ccc_high;
// byte 5
unsigned char read_bl_len : 4;
unsigned char ccc_low : 4;
// byte 6
unsigned char c_size_high : 2;
unsigned char reserved2 : 2;
unsigned char dsr_imp : 1;
unsigned char read_blk_misalign :1;
unsigned char write_blk_misalign : 1;
unsigned char read_bl_partial : 1;
// byte 7
unsigned char c_size_mid;
// byte 8
unsigned char vdd_r_curr_max : 3;
unsigned char vdd_r_curr_min : 3;
unsigned char c_size_low :2;
// byte 9
unsigned char c_size_mult_high : 2;
unsigned char vdd_w_cur_max : 3;
unsigned char vdd_w_curr_min : 3;
// byte 10
unsigned char sector_size_high : 6;
unsigned char erase_blk_en : 1;
unsigned char c_size_mult_low : 1;
// byte 11
unsigned char wp_grp_size : 7;
unsigned char sector_size_low : 1;
// byte 12
unsigned char write_bl_len_high : 2;
unsigned char r2w_factor : 3;
unsigned char reserved3 : 2;
unsigned char wp_grp_enable : 1;
// byte 13
unsigned char reserved4 : 5;
unsigned char write_partial : 1;
unsigned char write_bl_len_low : 2;
// byte 14
unsigned char reserved5: 2;
unsigned char file_format : 2;
unsigned char tmp_write_protect : 1;
unsigned char perm_write_protect : 1;
unsigned char copy : 1;
/** Indicates the file format on the card */
unsigned char file_format_grp : 1;
// byte 15
unsigned char always1 : 1;
unsigned char crc : 7;
}csd1_t;
//------------------------------------------------------------------------------
/** CSD for version 2.00 cards */
typedef struct CSDV2 {
// byte 0
unsigned char reserved1 : 6;
unsigned char csd_ver : 2;
// byte 1
/** fixed to 0X0E */
unsigned char taac;
// byte 2
/** fixed to 0 */
unsigned char nsac;
// byte 3
unsigned char tran_speed;
// byte 4
unsigned char ccc_high;
// byte 5
/** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */
unsigned char read_bl_len : 4;
unsigned char ccc_low : 4;
// byte 6
/** not used */
unsigned char reserved2 : 4;
unsigned char dsr_imp : 1;
/** fixed to 0 */
unsigned char read_blk_misalign :1;
/** fixed to 0 */
unsigned char write_blk_misalign : 1;
/** fixed to 0 - no partial read */
unsigned char read_bl_partial : 1;
// byte 7
/** not used */
unsigned char reserved3 : 2;
/** high part of card size */
unsigned char c_size_high : 6;
// byte 8
/** middle part of card size */
unsigned char c_size_mid;
// byte 9
/** low part of card size */
unsigned char c_size_low;
// byte 10
/** sector size is fixed at 64 KB */
unsigned char sector_size_high : 6;
/** fixed to 1 - erase single is supported */
unsigned char erase_blk_en : 1;
/** not used */
unsigned char reserved4 : 1;
// byte 11
unsigned char wp_grp_size : 7;
/** sector size is fixed at 64 KB */
unsigned char sector_size_low : 1;
// byte 12
/** write_bl_len fixed for 512 byte blocks */
unsigned char write_bl_len_high : 2;
/** fixed value of 2 */
unsigned char r2w_factor : 3;
/** not used */
unsigned char reserved5 : 2;
/** fixed value of 0 - no write protect groups */
unsigned char wp_grp_enable : 1;
// byte 13
unsigned char reserved6 : 5;
/** always zero - no partial block read*/
unsigned char write_partial : 1;
/** write_bl_len fixed for 512 byte blocks */
unsigned char write_bl_len_low : 2;
// byte 14
unsigned char reserved7: 2;
/** Do not use always 0 */
unsigned char file_format : 2;
unsigned char tmp_write_protect : 1;
unsigned char perm_write_protect : 1;
unsigned char copy : 1;
/** Do not use always 0 */
unsigned char file_format_grp : 1;
// byte 15
/** not used always 1 */
unsigned char always1 : 1;
/** checksum */
unsigned char crc : 7;
}csd2_t;
//------------------------------------------------------------------------------
/** union of old and new style CSD register */
union csd_t {
csd1_t v1;
csd2_t v2;
};
#endif // SdInfo_h
/* Arduino Sd2Card Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino Sd2Card Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino Sd2Card Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#ifndef SdInfo_h
#define SdInfo_h
#include <stdint.h>
// Based on the document:
//
// SD Specifications
// Part 1
// Physical Layer
// Simplified Specification
// Version 3.01
// May 18, 2010
//
// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
//------------------------------------------------------------------------------
// SD card commands
/** GO_IDLE_STATE - init card in spi mode if CS low */
uint8_t const CMD0 = 0X00;
/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/
uint8_t const CMD8 = 0X08;
/** SEND_CSD - read the Card Specific Data (CSD register) */
uint8_t const CMD9 = 0X09;
/** SEND_CID - read the card identification information (CID register) */
uint8_t const CMD10 = 0X0A;
/** STOP_TRANSMISSION - end multiple block read sequence */
uint8_t const CMD12 = 0X0C;
/** SEND_STATUS - read the card status register */
uint8_t const CMD13 = 0X0D;
/** READ_SINGLE_BLOCK - read a single data block from the card */
uint8_t const CMD17 = 0X11;
/** READ_MULTIPLE_BLOCK - read a multiple data blocks from the card */
uint8_t const CMD18 = 0X12;
/** WRITE_BLOCK - write a single data block to the card */
uint8_t const CMD24 = 0X18;
/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */
uint8_t const CMD25 = 0X19;
/** ERASE_WR_BLK_START - sets the address of the first block to be erased */
uint8_t const CMD32 = 0X20;
/** ERASE_WR_BLK_END - sets the address of the last block of the continuous
range to be erased*/
uint8_t const CMD33 = 0X21;
/** ERASE - erase all previously selected blocks */
uint8_t const CMD38 = 0X26;
/** Toshiba FlashAir: iSDIO */
uint8_t const CMD48 = 0x30;
/** Toshiba FlashAir: iSDIO */
uint8_t const CMD49 = 0x31;
/** APP_CMD - escape for application specific command */
uint8_t const CMD55 = 0X37;
/** READ_OCR - read the OCR register of a card */
uint8_t const CMD58 = 0X3A;
/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be
pre-erased before writing */
uint8_t const ACMD23 = 0X17;
/** SD_SEND_OP_COMD - Sends host capacity support information and
activates the card's initialization process */
uint8_t const ACMD41 = 0X29;
//------------------------------------------------------------------------------
/** status for card in the ready state */
uint8_t const R1_READY_STATE = 0X00;
/** status for card in the idle state */
uint8_t const R1_IDLE_STATE = 0X01;
/** status bit for illegal command */
uint8_t const R1_ILLEGAL_COMMAND = 0X04;
/** start data token for read or write single block*/
uint8_t const DATA_START_BLOCK = 0XFE;
/** stop token for write multiple blocks*/
uint8_t const STOP_TRAN_TOKEN = 0XFD;
/** start data token for write multiple blocks*/
uint8_t const WRITE_MULTIPLE_TOKEN = 0XFC;
/** mask for data response tokens after a write block operation */
uint8_t const DATA_RES_MASK = 0X1F;
/** write data accepted token */
uint8_t const DATA_RES_ACCEPTED = 0X05;
//------------------------------------------------------------------------------
/** Card IDentification (CID) register */
typedef struct CID {
// byte 0
/** Manufacturer ID */
unsigned char mid;
// byte 1-2
/** OEM/Application ID */
char oid[2];
// byte 3-7
/** Product name */
char pnm[5];
// byte 8
/** Product revision least significant digit */
unsigned char prv_m : 4;
/** Product revision most significant digit */
unsigned char prv_n : 4;
// byte 9-12
/** Product serial number */
uint32_t psn;
// byte 13
/** Manufacturing date year low digit */
unsigned char mdt_year_high : 4;
/** not used */
unsigned char reserved : 4;
// byte 14
/** Manufacturing date month */
unsigned char mdt_month : 4;
/** Manufacturing date year low digit */
unsigned char mdt_year_low :4;
// byte 15
/** not used always 1 */
unsigned char always1 : 1;
/** CRC7 checksum */
unsigned char crc : 7;
}cid_t;
//------------------------------------------------------------------------------
/** CSD for version 1.00 cards */
typedef struct CSDV1 {
// byte 0
unsigned char reserved1 : 6;
unsigned char csd_ver : 2;
// byte 1
unsigned char taac;
// byte 2
unsigned char nsac;
// byte 3
unsigned char tran_speed;
// byte 4
unsigned char ccc_high;
// byte 5
unsigned char read_bl_len : 4;
unsigned char ccc_low : 4;
// byte 6
unsigned char c_size_high : 2;
unsigned char reserved2 : 2;
unsigned char dsr_imp : 1;
unsigned char read_blk_misalign :1;
unsigned char write_blk_misalign : 1;
unsigned char read_bl_partial : 1;
// byte 7
unsigned char c_size_mid;
// byte 8
unsigned char vdd_r_curr_max : 3;
unsigned char vdd_r_curr_min : 3;
unsigned char c_size_low :2;
// byte 9
unsigned char c_size_mult_high : 2;
unsigned char vdd_w_cur_max : 3;
unsigned char vdd_w_curr_min : 3;
// byte 10
unsigned char sector_size_high : 6;
unsigned char erase_blk_en : 1;
unsigned char c_size_mult_low : 1;
// byte 11
unsigned char wp_grp_size : 7;
unsigned char sector_size_low : 1;
// byte 12
unsigned char write_bl_len_high : 2;
unsigned char r2w_factor : 3;
unsigned char reserved3 : 2;
unsigned char wp_grp_enable : 1;
// byte 13
unsigned char reserved4 : 5;
unsigned char write_partial : 1;
unsigned char write_bl_len_low : 2;
// byte 14
unsigned char reserved5: 2;
unsigned char file_format : 2;
unsigned char tmp_write_protect : 1;
unsigned char perm_write_protect : 1;
unsigned char copy : 1;
/** Indicates the file format on the card */
unsigned char file_format_grp : 1;
// byte 15
unsigned char always1 : 1;
unsigned char crc : 7;
}csd1_t;
//------------------------------------------------------------------------------
/** CSD for version 2.00 cards */
typedef struct CSDV2 {
// byte 0
unsigned char reserved1 : 6;
unsigned char csd_ver : 2;
// byte 1
/** fixed to 0X0E */
unsigned char taac;
// byte 2
/** fixed to 0 */
unsigned char nsac;
// byte 3
unsigned char tran_speed;
// byte 4
unsigned char ccc_high;
// byte 5
/** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */
unsigned char read_bl_len : 4;
unsigned char ccc_low : 4;
// byte 6
/** not used */
unsigned char reserved2 : 4;
unsigned char dsr_imp : 1;
/** fixed to 0 */
unsigned char read_blk_misalign :1;
/** fixed to 0 */
unsigned char write_blk_misalign : 1;
/** fixed to 0 - no partial read */
unsigned char read_bl_partial : 1;
// byte 7
/** not used */
unsigned char reserved3 : 2;
/** high part of card size */
unsigned char c_size_high : 6;
// byte 8
/** middle part of card size */
unsigned char c_size_mid;
// byte 9
/** low part of card size */
unsigned char c_size_low;
// byte 10
/** sector size is fixed at 64 KB */
unsigned char sector_size_high : 6;
/** fixed to 1 - erase single is supported */
unsigned char erase_blk_en : 1;
/** not used */
unsigned char reserved4 : 1;
// byte 11
unsigned char wp_grp_size : 7;
/** sector size is fixed at 64 KB */
unsigned char sector_size_low : 1;
// byte 12
/** write_bl_len fixed for 512 byte blocks */
unsigned char write_bl_len_high : 2;
/** fixed value of 2 */
unsigned char r2w_factor : 3;
/** not used */
unsigned char reserved5 : 2;
/** fixed value of 0 - no write protect groups */
unsigned char wp_grp_enable : 1;
// byte 13
unsigned char reserved6 : 5;
/** always zero - no partial block read*/
unsigned char write_partial : 1;
/** write_bl_len fixed for 512 byte blocks */
unsigned char write_bl_len_low : 2;
// byte 14
unsigned char reserved7: 2;
/** Do not use always 0 */
unsigned char file_format : 2;
unsigned char tmp_write_protect : 1;
unsigned char perm_write_protect : 1;
unsigned char copy : 1;
/** Do not use always 0 */
unsigned char file_format_grp : 1;
// byte 15
/** not used always 1 */
unsigned char always1 : 1;
/** checksum */
unsigned char crc : 7;
}csd2_t;
//------------------------------------------------------------------------------
/** union of old and new style CSD register */
union csd_t {
csd1_t v1;
csd2_t v2;
};
#endif // SdInfo_h
#endif

808
Firmware/SdVolume.cpp
View File

@ -1,405 +1,405 @@
/* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#include "SdVolume.h"
//------------------------------------------------------------------------------
#if !USE_MULTIPLE_CARDS
// raw block cache
uint32_t SdVolume::cacheBlockNumber_; // current block number
cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card
Sd2Card* SdVolume::sdCard_; // pointer to SD card object
bool SdVolume::cacheDirty_; // cacheFlush() will write block if true
uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT
#endif // USE_MULTIPLE_CARDS
//------------------------------------------------------------------------------
// find a contiguous group of clusters
bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
// start of group
uint32_t bgnCluster;
// end of group
uint32_t endCluster;
// last cluster of FAT
uint32_t fatEnd = clusterCount_ + 1;
// flag to save place to start next search
bool setStart;
// set search start cluster
if (*curCluster) {
// try to make file contiguous
bgnCluster = *curCluster + 1;
// don't save new start location
setStart = false;
} else {
// start at likely place for free cluster
bgnCluster = allocSearchStart_;
// save next search start if one cluster
setStart = count == 1;
}
// end of group
endCluster = bgnCluster;
// search the FAT for free clusters
for (uint32_t n = 0;; n++, endCluster++) {
// can't find space checked all clusters
if (n >= clusterCount_) goto fail;
// past end - start from beginning of FAT
if (endCluster > fatEnd) {
bgnCluster = endCluster = 2;
}
uint32_t f;
if (!fatGet(endCluster, &f)) goto fail;
if (f != 0) {
// cluster in use try next cluster as bgnCluster
bgnCluster = endCluster + 1;
} else if ((endCluster - bgnCluster + 1) == count) {
// done - found space
break;
}
}
// mark end of chain
if (!fatPutEOC(endCluster)) goto fail;
// link clusters
while (endCluster > bgnCluster) {
if (!fatPut(endCluster - 1, endCluster)) goto fail;
endCluster--;
}
if (*curCluster != 0) {
// connect chains
if (!fatPut(*curCluster, bgnCluster)) goto fail;
}
// return first cluster number to caller
*curCluster = bgnCluster;
// remember possible next free cluster
if (setStart) allocSearchStart_ = bgnCluster + 1;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
bool SdVolume::cacheFlush() {
if (cacheDirty_) {
if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) {
goto fail;
}
// mirror FAT tables
if (cacheMirrorBlock_) {
if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) {
goto fail;
}
cacheMirrorBlock_ = 0;
}
cacheDirty_ = 0;
}
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) {
if (cacheBlockNumber_ != blockNumber) {
if (!cacheFlush()) goto fail;
if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) goto fail;
cacheBlockNumber_ = blockNumber;
}
if (dirty) cacheDirty_ = true;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// return the size in bytes of a cluster chain
bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
uint32_t s = 0;
do {
if (!fatGet(cluster, &cluster)) goto fail;
s += 512UL << clusterSizeShift_;
} while (!isEOC(cluster));
*size = s;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// Fetch a FAT entry
bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
uint32_t lba;
if (cluster > (clusterCount_ + 1)) goto fail;
if (FAT12_SUPPORT && fatType_ == 12) {
uint16_t index = cluster;
index += index >> 1;
lba = fatStartBlock_ + (index >> 9);
if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail;
index &= 0X1FF;
uint16_t tmp = cacheBuffer_.data[index];
index++;
if (index == 512) {
if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) goto fail;
index = 0;
}
tmp |= cacheBuffer_.data[index] << 8;
*value = cluster & 1 ? tmp >> 4 : tmp & 0XFFF;
return true;
}
if (fatType_ == 16) {
lba = fatStartBlock_ + (cluster >> 8);
} else if (fatType_ == 32) {
lba = fatStartBlock_ + (cluster >> 7);
} else {
goto fail;
}
if (lba != cacheBlockNumber_) {
if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail;
}
if (fatType_ == 16) {
*value = cacheBuffer_.fat16[cluster & 0XFF];
} else {
*value = cacheBuffer_.fat32[cluster & 0X7F] & FAT32MASK;
}
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// Store a FAT entry
bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
uint32_t lba;
// error if reserved cluster
if (cluster < 2) goto fail;
// error if not in FAT
if (cluster > (clusterCount_ + 1)) goto fail;
if (FAT12_SUPPORT && fatType_ == 12) {
uint16_t index = cluster;
index += index >> 1;
lba = fatStartBlock_ + (index >> 9);
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
index &= 0X1FF;
uint8_t tmp = value;
if (cluster & 1) {
tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4;
}
cacheBuffer_.data[index] = tmp;
index++;
if (index == 512) {
lba++;
index = 0;
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
}
tmp = value >> 4;
if (!(cluster & 1)) {
tmp = ((cacheBuffer_.data[index] & 0XF0)) | tmp >> 4;
}
cacheBuffer_.data[index] = tmp;
return true;
}
if (fatType_ == 16) {
lba = fatStartBlock_ + (cluster >> 8);
} else if (fatType_ == 32) {
lba = fatStartBlock_ + (cluster >> 7);
} else {
goto fail;
}
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
// store entry
if (fatType_ == 16) {
cacheBuffer_.fat16[cluster & 0XFF] = value;
} else {
cacheBuffer_.fat32[cluster & 0X7F] = value;
}
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// free a cluster chain
bool SdVolume::freeChain(uint32_t cluster) {
uint32_t next;
// clear free cluster location
allocSearchStart_ = 2;
do {
if (!fatGet(cluster, &next)) goto fail;
// free cluster
if (!fatPut(cluster, 0)) goto fail;
cluster = next;
} while (!isEOC(cluster));
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
/** Volume free space in clusters.
*
* \return Count of free clusters for success or -1 if an error occurs.
*/
int32_t SdVolume::freeClusterCount() {
uint32_t free = 0;
uint16_t n;
uint32_t todo = clusterCount_ + 2;
if (fatType_ == 16) {
n = 256;
} else if (fatType_ == 32) {
n = 128;
} else {
// put FAT12 here
return -1;
}
for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) {
if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1;
if (todo < n) n = todo;
if (fatType_ == 16) {
for (uint16_t i = 0; i < n; i++) {
if (cacheBuffer_.fat16[i] == 0) free++;
}
} else {
for (uint16_t i = 0; i < n; i++) {
if (cacheBuffer_.fat32[i] == 0) free++;
}
}
}
return free;
}
//------------------------------------------------------------------------------
/** Initialize a FAT volume.
*
* \param[in] dev The SD card where the volume is located.
*
* \param[in] part The partition to be used. Legal values for \a part are
* 1-4 to use the corresponding partition on a device formatted with
* a MBR, Master Boot Record, or zero if the device is formatted as
* a super floppy with the FAT boot sector in block zero.
*
* \return The value one, true, is returned for success and
* the value zero, false, is returned for failure. Reasons for
* failure include not finding a valid partition, not finding a valid
* FAT file system in the specified partition or an I/O error.
*/
bool SdVolume::init(Sd2Card* dev, uint8_t part) {
uint32_t totalBlocks;
uint32_t volumeStartBlock = 0;
fat32_boot_t* fbs;
sdCard_ = dev;
fatType_ = 0;
allocSearchStart_ = 2;
cacheDirty_ = 0; // cacheFlush() will write block if true
cacheMirrorBlock_ = 0;
cacheBlockNumber_ = 0XFFFFFFFF;
// if part == 0 assume super floppy with FAT boot sector in block zero
// if part > 0 assume mbr volume with partition table
if (part) {
if (part > 4)goto fail;
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail;
part_t* p = &cacheBuffer_.mbr.part[part-1];
if ((p->boot & 0X7F) !=0 ||
p->totalSectors < 100 ||
p->firstSector == 0) {
// not a valid partition
goto fail;
}
volumeStartBlock = p->firstSector;
}
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail;
fbs = &cacheBuffer_.fbs32;
if (fbs->bytesPerSector != 512 ||
fbs->fatCount == 0 ||
fbs->reservedSectorCount == 0 ||
fbs->sectorsPerCluster == 0) {
// not valid FAT volume
goto fail;
}
fatCount_ = fbs->fatCount;
blocksPerCluster_ = fbs->sectorsPerCluster;
// determine shift that is same as multiply by blocksPerCluster_
clusterSizeShift_ = 0;
while (blocksPerCluster_ != (1 << clusterSizeShift_)) {
// error if not power of 2
if (clusterSizeShift_++ > 7) goto fail;
}
blocksPerFat_ = fbs->sectorsPerFat16 ?
fbs->sectorsPerFat16 : fbs->sectorsPerFat32;
fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount;
// count for FAT16 zero for FAT32
rootDirEntryCount_ = fbs->rootDirEntryCount;
// directory start for FAT16 dataStart for FAT32
rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_;
// data start for FAT16 and FAT32
dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511)/512);
// total blocks for FAT16 or FAT32
totalBlocks = fbs->totalSectors16 ?
fbs->totalSectors16 : fbs->totalSectors32;
// total data blocks
clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);
// divide by cluster size to get cluster count
clusterCount_ >>= clusterSizeShift_;
// FAT type is determined by cluster count
if (clusterCount_ < 4085) {
fatType_ = 12;
if (!FAT12_SUPPORT) goto fail;
} else if (clusterCount_ < 65525) {
fatType_ = 16;
} else {
rootDirStart_ = fbs->fat32RootCluster;
fatType_ = 32;
}
return true;
fail:
return false;
}
/* Arduino SdFat Library
* Copyright (C) 2009 by William Greiman
*
* This file is part of the Arduino SdFat Library
*
* This Library is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This Library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Arduino SdFat Library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#ifdef SDSUPPORT
#include "SdVolume.h"
//------------------------------------------------------------------------------
#if !USE_MULTIPLE_CARDS
// raw block cache
uint32_t SdVolume::cacheBlockNumber_; // current block number
cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card
Sd2Card* SdVolume::sdCard_; // pointer to SD card object
bool SdVolume::cacheDirty_; // cacheFlush() will write block if true
uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT
#endif // USE_MULTIPLE_CARDS
//------------------------------------------------------------------------------
// find a contiguous group of clusters
bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
// start of group
uint32_t bgnCluster;
// end of group
uint32_t endCluster;
// last cluster of FAT
uint32_t fatEnd = clusterCount_ + 1;
// flag to save place to start next search
bool setStart;
// set search start cluster
if (*curCluster) {
// try to make file contiguous
bgnCluster = *curCluster + 1;
// don't save new start location
setStart = false;
} else {
// start at likely place for free cluster
bgnCluster = allocSearchStart_;
// save next search start if one cluster
setStart = count == 1;
}
// end of group
endCluster = bgnCluster;
// search the FAT for free clusters
for (uint32_t n = 0;; n++, endCluster++) {
// can't find space checked all clusters
if (n >= clusterCount_) goto fail;
// past end - start from beginning of FAT
if (endCluster > fatEnd) {
bgnCluster = endCluster = 2;
}
uint32_t f;
if (!fatGet(endCluster, &f)) goto fail;
if (f != 0) {
// cluster in use try next cluster as bgnCluster
bgnCluster = endCluster + 1;
} else if ((endCluster - bgnCluster + 1) == count) {
// done - found space
break;
}
}
// mark end of chain
if (!fatPutEOC(endCluster)) goto fail;
// link clusters
while (endCluster > bgnCluster) {
if (!fatPut(endCluster - 1, endCluster)) goto fail;
endCluster--;
}
if (*curCluster != 0) {
// connect chains
if (!fatPut(*curCluster, bgnCluster)) goto fail;
}
// return first cluster number to caller
*curCluster = bgnCluster;
// remember possible next free cluster
if (setStart) allocSearchStart_ = bgnCluster + 1;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
bool SdVolume::cacheFlush() {
if (cacheDirty_) {
if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) {
goto fail;
}
// mirror FAT tables
if (cacheMirrorBlock_) {
if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) {
goto fail;
}
cacheMirrorBlock_ = 0;
}
cacheDirty_ = 0;
}
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) {
if (cacheBlockNumber_ != blockNumber) {
if (!cacheFlush()) goto fail;
if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) goto fail;
cacheBlockNumber_ = blockNumber;
}
if (dirty) cacheDirty_ = true;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// return the size in bytes of a cluster chain
bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
uint32_t s = 0;
do {
if (!fatGet(cluster, &cluster)) goto fail;
s += 512UL << clusterSizeShift_;
} while (!isEOC(cluster));
*size = s;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// Fetch a FAT entry
bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
uint32_t lba;
if (cluster > (clusterCount_ + 1)) goto fail;
if (FAT12_SUPPORT && fatType_ == 12) {
uint16_t index = cluster;
index += index >> 1;
lba = fatStartBlock_ + (index >> 9);
if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail;
index &= 0X1FF;
uint16_t tmp = cacheBuffer_.data[index];
index++;
if (index == 512) {
if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) goto fail;
index = 0;
}
tmp |= cacheBuffer_.data[index] << 8;
*value = cluster & 1 ? tmp >> 4 : tmp & 0XFFF;
return true;
}
if (fatType_ == 16) {
lba = fatStartBlock_ + (cluster >> 8);
} else if (fatType_ == 32) {
lba = fatStartBlock_ + (cluster >> 7);
} else {
goto fail;
}
if (lba != cacheBlockNumber_) {
if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail;
}
if (fatType_ == 16) {
*value = cacheBuffer_.fat16[cluster & 0XFF];
} else {
*value = cacheBuffer_.fat32[cluster & 0X7F] & FAT32MASK;
}
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// Store a FAT entry
bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
uint32_t lba;
// error if reserved cluster
if (cluster < 2) goto fail;
// error if not in FAT
if (cluster > (clusterCount_ + 1)) goto fail;
if (FAT12_SUPPORT && fatType_ == 12) {
uint16_t index = cluster;
index += index >> 1;
lba = fatStartBlock_ + (index >> 9);
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
index &= 0X1FF;
uint8_t tmp = value;
if (cluster & 1) {
tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4;
}
cacheBuffer_.data[index] = tmp;
index++;
if (index == 512) {
lba++;
index = 0;
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
}
tmp = value >> 4;
if (!(cluster & 1)) {
tmp = ((cacheBuffer_.data[index] & 0XF0)) | tmp >> 4;
}
cacheBuffer_.data[index] = tmp;
return true;
}
if (fatType_ == 16) {
lba = fatStartBlock_ + (cluster >> 8);
} else if (fatType_ == 32) {
lba = fatStartBlock_ + (cluster >> 7);
} else {
goto fail;
}
if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
// store entry
if (fatType_ == 16) {
cacheBuffer_.fat16[cluster & 0XFF] = value;
} else {
cacheBuffer_.fat32[cluster & 0X7F] = value;
}
// mirror second FAT
if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
// free a cluster chain
bool SdVolume::freeChain(uint32_t cluster) {
uint32_t next;
// clear free cluster location
allocSearchStart_ = 2;
do {
if (!fatGet(cluster, &next)) goto fail;
// free cluster
if (!fatPut(cluster, 0)) goto fail;
cluster = next;
} while (!isEOC(cluster));
return true;
fail:
return false;
}
//------------------------------------------------------------------------------
/** Volume free space in clusters.
*
* \return Count of free clusters for success or -1 if an error occurs.
*/
int32_t SdVolume::freeClusterCount() {
uint32_t free = 0;
uint16_t n;
uint32_t todo = clusterCount_ + 2;
if (fatType_ == 16) {
n = 256;
} else if (fatType_ == 32) {
n = 128;
} else {
// put FAT12 here
return -1;
}
for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) {
if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1;
if (todo < n) n = todo;
if (fatType_ == 16) {
for (uint16_t i = 0; i < n; i++) {
if (cacheBuffer_.fat16[i] == 0) free++;
}
} else {
for (uint16_t i = 0; i < n; i++) {
if (cacheBuffer_.fat32[i] == 0) free++;
}
}
}
return free;
}
//------------------------------------------------------------------------------
/** Initialize a FAT volume.
*
* \param[in] dev The SD card where the volume is located.
*
* \param[in] part The partition to be used. Legal values for \a part are
* 1-4 to use the corresponding partition on a device formatted with
* a MBR, Master Boot Record, or zero if the device is formatted as
* a super floppy with the FAT boot sector in block zero.
*
* \return The value one, true, is returned for success and
* the value zero, false, is returned for failure. Reasons for
* failure include not finding a valid partition, not finding a valid
* FAT file system in the specified partition or an I/O error.
*/
bool SdVolume::init(Sd2Card* dev, uint8_t part) {
uint32_t totalBlocks;
uint32_t volumeStartBlock = 0;
fat32_boot_t* fbs;
sdCard_ = dev;
fatType_ = 0;
allocSearchStart_ = 2;
cacheDirty_ = 0; // cacheFlush() will write block if true
cacheMirrorBlock_ = 0;
cacheBlockNumber_ = 0XFFFFFFFF;
// if part == 0 assume super floppy with FAT boot sector in block zero
// if part > 0 assume mbr volume with partition table
if (part) {
if (part > 4)goto fail;
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail;
part_t* p = &cacheBuffer_.mbr.part[part-1];
if ((p->boot & 0X7F) !=0 ||
p->totalSectors < 100 ||
p->firstSector == 0) {
// not a valid partition
goto fail;
}
volumeStartBlock = p->firstSector;
}
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail;
fbs = &cacheBuffer_.fbs32;
if (fbs->bytesPerSector != 512 ||
fbs->fatCount == 0 ||
fbs->reservedSectorCount == 0 ||
fbs->sectorsPerCluster == 0) {
// not valid FAT volume
goto fail;
}
fatCount_ = fbs->fatCount;
blocksPerCluster_ = fbs->sectorsPerCluster;
// determine shift that is same as multiply by blocksPerCluster_
clusterSizeShift_ = 0;
while (blocksPerCluster_ != (1 << clusterSizeShift_)) {
// error if not power of 2
if (clusterSizeShift_++ > 7) goto fail;
}
blocksPerFat_ = fbs->sectorsPerFat16 ?
fbs->sectorsPerFat16 : fbs->sectorsPerFat32;
fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount;
// count for FAT16 zero for FAT32
rootDirEntryCount_ = fbs->rootDirEntryCount;
// directory start for FAT16 dataStart for FAT32
rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_;
// data start for FAT16 and FAT32
dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511)/512);
// total blocks for FAT16 or FAT32
totalBlocks = fbs->totalSectors16 ?
fbs->totalSectors16 : fbs->totalSectors32;
// total data blocks
clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);
// divide by cluster size to get cluster count
clusterCount_ >>= clusterSizeShift_;
// FAT type is determined by cluster count
if (clusterCount_ < 4085) {
fatType_ = 12;
if (!FAT12_SUPPORT) goto fail;
} else if (clusterCount_ < 65525) {
fatType_ = 16;
} else {
rootDirStart_ = fbs->fat32RootCluster;
fatType_ = 32;
}
return true;
fail:
return false;
}
#endif

566
Firmware/language_it.h
View File

@ -1,283 +1,283 @@
#define WELCOME_MSG CUSTOM_MENDEL_NAME " pronta."
#define MSG_SD_INSERTED "SD inserita"
#define MSG_SD_REMOVED "SD rimossa"
#define MSG_MAIN "Menu principale"
#define MSG_DISABLE_STEPPERS "Disabilit motori"
#define MSG_AUTO_HOME "Trova origine"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
#define MSG_MOVE_AXIS "Muovi asse"
#define MSG_MOVE_X "Muovi X"
#define MSG_MOVE_Y "Muovi Y"
#define MSG_MOVE_Z "Muovi Z"
#define MSG_MOVE_E "Muovi Estrusore"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocita"
#define MSG_NOZZLE "Ugello"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Letto"
#define MSG_FAN_SPEED "Velocita vent."
#define MSG_FLOW "Flusso"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Motion"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
#define MSG_REFRESH "\xF8" "Refresh"
#define MSG_WATCH "Schermata info"
#define MSG_TUNE "Regola"
#define MSG_PAUSE_PRINT "Metti in pausa"
#define MSG_RESUME_PRINT "Riprendi stampa"
#define MSG_STOP_PRINT "Arresta stampa"
#define MSG_CARD_MENU "Stampa da SD"
#define MSG_NO_CARD "Nessuna SD"
#define MSG_DWELL "Sospensione..."
#define MSG_USERWAIT "Attendendo utente"
#define MSG_RESUMING "Riprendi stampa"
#define MSG_PRINT_ABORTED "Stampa abortita"
#define MSG_NO_MOVE "Nessun movimento."
#define MSG_KILLED "IN TILT."
#define MSG_STOPPED "ARRESTATO."
#define MSG_FILAMENTCHANGE "Camb. filamento"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Change SD card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Compensazione Z"
#define MSG_ADJUSTZ "Autoregolare Z?"
#define MSG_PICK_Z "Pick print"
#define MSG_SETTINGS "Impostazioni"
#define MSG_PREHEAT "Preriscalda"
#define MSG_HEATING "Riscaldamento..."
#define MSG_SUPPORT "Support"
#define MSG_YES "Si"
#define MSG_NO "No"
#define MSG_NOT_LOADED "Fil. non caricato"
#define MSG_NOT_COLOR "Colore non puro"
#define MSG_LOADING_COLOR "Caricando colore"
#define MSG_CHANGE_SUCCESS "Cambio riuscito!"
#define MSG_PRESS "e cliccare manopola"
#define MSG_INSERT_FILAMENT "Inserire filamento"
#define MSG_CHANGING_FILAMENT "Cambiando filam."
#define MSG_PLEASE_WAIT "Aspetta"
#define MSG_PREHEAT_NOZZLE "Preris. ugello!"
#define MSG_HEATING_COMPLETE "Riscald. completo"
#define MSG_BED_HEATING "Riscald. letto"
#define MSG_BED_DONE "Piatto fatto."
#define MSG_ERROR "ERRORE:"
#define MSG_CORRECTLY "Cambiato corr.?"
#define MSG_LOADING_FILAMENT "Caricando filam."
#define MSG_UNLOAD_FILAMENT "Scarica filamento"
#define MSG_LOAD_FILAMENT "Carica filamento"
#define MSG_SILENT_MODE_ON "Modo [silenzioso]"
#define MSG_SILENT_MODE_OFF "Mode [forte]"
#define MSG_REBOOT "Riavvia stampante"
#define MSG_TAKE_EFFECT " per attualizzare"
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
#define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_END_FILE_LIST "End file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_RESEND "Resend: "
#define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_OPENED "File opened: "
#define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Adjusting Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#define MSG_LANGUAGE_NAME "Italiano"
#define MSG_LANGUAGE_SELECT "Seleziona lingua"
#define MSG_PRUSA3D "prusa3d.com"
#define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
#define MSG_SELFTEST_ERROR "Autotest negativo"
#define MSG_SELFTEST_PLEASECHECK "Verificare:"
#define MSG_SELFTEST_NOTCONNECTED "Non connesso"
#define MSG_SELFTEST_HEATERTHERMISTOR "Riscald./Termist."
#define MSG_SELFTEST_BEDHEATER "Letto/Riscald."
#define MSG_SELFTEST_WIRINGERROR "Errore cablaggio"
#define MSG_SELFTEST_ENDSTOPS "Finecorsa (2)"
#define MSG_SELFTEST_MOTOR "Motore"
#define MSG_SELFTEST_ENDSTOP "Finecorsa"
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Finec. fuori por."
#define MSG_SELFTEST_OK "Autotest OK"
#define(length=20) MSG_SELFTEST_FAN "Prova del ventilator";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Vent di stampa ant.?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Vent SX sull'ugello?";
#define MSG_SELFTEST_FAN_YES "Gira";
#define MSG_SELFTEST_FAN_NO "Non si gira";
#define MSG_STATS_TOTALFILAMENT "Filamento tot:"
#define MSG_STATS_TOTALPRINTTIME "Tempo stampa tot:"
#define MSG_STATS_FILAMENTUSED "Filamento usato:"
#define MSG_STATS_PRINTTIME "Tempo di stampa:"
#define MSG_SELFTEST_START "Avvia autotest"
#define MSG_SELFTEST_CHECK_ENDSTOPS "Verifica finecorsa"
#define MSG_SELFTEST_CHECK_HOTEND "Verifica ugello"
#define MSG_SELFTEST_CHECK_X "Verifica asse X"
#define MSG_SELFTEST_CHECK_Y "Verifica asse Y"
#define MSG_SELFTEST_CHECK_Z "Verifica asse Z"
#define MSG_SELFTEST_CHECK_BED "Verifica letto"
#define MSG_SELFTEST_CHECK_ALLCORRECT "Nessun errore"
#define MSG_SELFTEST "Autotest"
#define MSG_SELFTEST_FAILED "Autotest fallito"
#define MSG_STATISTICS "Statistiche"
#define MSG_USB_PRINTING "Stampa da USB"
#define MSG_HOMEYZ "Calibra Z"
#define MSG_HOMEYZ_PROGRESS "Calibrando Z"
#define MSG_HOMEYZ_DONE "Calibrazione OK"
#define MSG_SHOW_END_STOPS "Stato finecorsa"
#define MSG_CALIBRATE_BED "Calibra XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
#define MSG_CONFIRM_NOZZLE_CLEAN "Pulire l'ugello per la calibrazione, poi fare click."
#define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "I carrelli Z sin/des sono altezza max?"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Ricerca del letto punto di calibraz."
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " su 4"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Perfezion. il letto punto di calibraz."
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " su 9"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Misurare l'altezza di riferimento del punto di calibrazione"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " su 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiterazione "
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato."
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibrazione XYZ fallita. Si prega di consultare il manuale."
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."
#define MSG_BED_LEVELING_FAILED_POINT_LOW "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset."
#define MSG_BED_LEVELING_FAILED_POINT_HIGH "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset."
#define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset."
#define MSG_NEW_FIRMWARE_AVAILABLE "Nuova versione del firmware disponibile"
#define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prega aggiorna."
#define MSG_FOLLOW_CALIBRATION_FLOW "Stampante ancora non calibrata. Si prega di seguire il manuale, capitolo PRIMI PASSI, sezione della calibrazione."
#define MSG_BABYSTEP_Z_NOT_SET "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration."
#define MSG_BED_CORRECTION_MENU "Correz. liv.letto"
#define MSG_BED_CORRECTION_LEFT "Sinistra [um]"
#define MSG_BED_CORRECTION_RIGHT "Destra [um]"
#define MSG_BED_CORRECTION_FRONT "Fronte [um]"
#define MSG_BED_CORRECTION_REAR "Retro [um]"
#define MSG_BED_CORRECTION_RESET "Reset"
#define MSG_MESH_BED_LEVELING "Mesh livel. letto"
#define MSG_MENU_CALIBRATION "Calibrazione"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
#define MSG_LOOSE_PULLEY "Puleggia lenta"
#define MSG_FILAMENT_LOADING_T0 "Inserire filamento nell'estrusore 1. Click per continuare."
#define MSG_FILAMENT_LOADING_T1 "Inserire filamento nell'estrusore 2. Click per continuare."
#define MSG_FILAMENT_LOADING_T2 "Inserire filamento nell'estrusore 3. Click per continuare."
#define MSG_FILAMENT_LOADING_T3 "Inserire filamento nell'estrusore 4. Click per continuare."
#define MSG_CHANGE_EXTR "Cambio estrusore."
#define MSG_FIL_ADJUSTING "Filamento in fase di regolazione. Attendere prego."
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."
#define MSG_CALIBRATE_E "Calibra E"
#define MSG_E_CAL_KNOB "Girare la manopola affinche' il segno raggiunga il corpo dell'estrusore. Click per continuare."
#define MSG_MARK_FIL "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare."
#define MSG_CLEAN_NOZZLE_E "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare."
#define MSG_WAITING_TEMP "In attesa del raffreddamento della testina e del piatto"
#define MSG_FILAMENT_CLEAN "Il colore e' nitido?"
#define MSG_UNLOADING_FILAMENT "Rilasc. filamento"
#define MSG_PAPER "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."
#define MSG_FINISHING_MOVEMENTS "Arresto in corso"
#define MSG_PRINT_PAUSED "Stampa in pausa"
#define MSG_RESUMING_PRINT "Stampa in ripresa"
#define MSG_PID_EXTRUDER "Calibrazione PID"
#define MSG_SET_TEMPERATURE "Imposta temperatura"
#define MSG_PID_FINISHED "Cal. PID completa"
#define MSG_PID_RUNNING "Cal. PID"
#define MSG_CALIBRATE_PINDA "Calibrare"
#define MSG_CALIBRATION_PINDA_MENU "Taratura temp."
#define MSG_PINDA_NOT_CALIBRATED "Taratura della temperatura non ancora eseguita"
#define MSG_PINDA_PREHEAT "Riscald. PINDA"
#define MSG_TEMP_CALIBRATION "Cal. temp. "
#define MSG_TEMP_CALIBRATION_DONE "Taratura temperatura terminata. Fare click per continuare."
#define MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
#define MSG_LOAD_ALL "Caricare tutti"
#define MSG_LOAD_FILAMENT_1 "Caricare fil. 1"
#define MSG_LOAD_FILAMENT_2 "Caricare fil. 2"
#define MSG_LOAD_FILAMENT_3 "Caricare fil. 3"
#define MSG_LOAD_FILAMENT_4 "Caricare fil. 4"
#define MSG_UNLOAD_FILAMENT_1 "Rilasciare fil. 1"
#define MSG_UNLOAD_FILAMENT_2 "Rilasciare fil. 1"
#define MSG_UNLOAD_FILAMENT_3 "Rilasciare fil. 1"
#define MSG_UNLOAD_FILAMENT_4 "Rilasciare fil. 1"
#define MSG_UNLOAD_ALL "Rilasciare tutti"
#define MSG_PREPARE_FILAMENT "Preparare filamento"
#define MSG_ALL "Tutti"
#define MSG_USED "Usati nella stampa"
#define MSG_CURRENT "Attuale"
#define WELCOME_MSG CUSTOM_MENDEL_NAME " pronta."
#define MSG_SD_INSERTED "SD inserita"
#define MSG_SD_REMOVED "SD rimossa"
#define MSG_MAIN "Menu principale"
#define MSG_DISABLE_STEPPERS "Disabilit motori"
#define MSG_AUTO_HOME "Trova origine"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
#define MSG_MOVE_AXIS "Muovi asse"
#define MSG_MOVE_X "Muovi X"
#define MSG_MOVE_Y "Muovi Y"
#define MSG_MOVE_Z "Muovi Z"
#define MSG_MOVE_E "Muovi Estrusore"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocita"
#define MSG_NOZZLE "Ugello"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Letto"
#define MSG_FAN_SPEED "Velocita vent."
#define MSG_FLOW "Flusso"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Motion"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
#define MSG_REFRESH "\xF8" "Refresh"
#define MSG_WATCH "Schermata info"
#define MSG_TUNE "Regola"
#define MSG_PAUSE_PRINT "Metti in pausa"
#define MSG_RESUME_PRINT "Riprendi stampa"
#define MSG_STOP_PRINT "Arresta stampa"
#define MSG_CARD_MENU "Stampa da SD"
#define MSG_NO_CARD "Nessuna SD"
#define MSG_DWELL "Sospensione..."
#define MSG_USERWAIT "Attendendo utente"
#define MSG_RESUMING "Riprendi stampa"
#define MSG_PRINT_ABORTED "Stampa abortita"
#define MSG_NO_MOVE "Nessun movimento."
#define MSG_KILLED "IN TILT."
#define MSG_STOPPED "ARRESTATO."
#define MSG_FILAMENTCHANGE "Camb. filamento"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Change SD card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Compensazione Z"
#define MSG_ADJUSTZ "Autoregolare Z?"
#define MSG_PICK_Z "Pick print"
#define MSG_SETTINGS "Impostazioni"
#define MSG_PREHEAT "Preriscalda"
#define MSG_HEATING "Riscaldamento..."
#define MSG_SUPPORT "Support"
#define MSG_YES "Si"
#define MSG_NO "No"
#define MSG_NOT_LOADED "Fil. non caricato"
#define MSG_NOT_COLOR "Colore non puro"
#define MSG_LOADING_COLOR "Caricando colore"
#define MSG_CHANGE_SUCCESS "Cambio riuscito!"
#define MSG_PRESS "e cliccare manopola"
#define MSG_INSERT_FILAMENT "Inserire filamento"
#define MSG_CHANGING_FILAMENT "Cambiando filam."
#define MSG_PLEASE_WAIT "Aspetta"
#define MSG_PREHEAT_NOZZLE "Preris. ugello!"
#define MSG_HEATING_COMPLETE "Riscald. completo"
#define MSG_BED_HEATING "Riscald. letto"
#define MSG_BED_DONE "Piatto fatto."
#define MSG_ERROR "ERRORE:"
#define MSG_CORRECTLY "Cambiato corr.?"
#define MSG_LOADING_FILAMENT "Caricando filam."
#define MSG_UNLOAD_FILAMENT "Scarica filamento"
#define MSG_LOAD_FILAMENT "Carica filamento"
#define MSG_SILENT_MODE_ON "Modo [silenzioso]"
#define MSG_SILENT_MODE_OFF "Mode [forte]"
#define MSG_REBOOT "Riavvia stampante"
#define MSG_TAKE_EFFECT " per attualizzare"
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
#define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_END_FILE_LIST "End file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_RESEND "Resend: "
#define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_OPENED "File opened: "
#define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Adjusting Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#define MSG_LANGUAGE_NAME "Italiano"
#define MSG_LANGUAGE_SELECT "Seleziona lingua"
#define MSG_PRUSA3D "prusa3d.com"
#define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
#define MSG_SELFTEST_ERROR "Autotest negativo"
#define MSG_SELFTEST_PLEASECHECK "Verificare:"
#define MSG_SELFTEST_NOTCONNECTED "Non connesso"
#define MSG_SELFTEST_HEATERTHERMISTOR "Riscald./Termist."
#define MSG_SELFTEST_BEDHEATER "Letto/Riscald."
#define MSG_SELFTEST_WIRINGERROR "Errore cablaggio"
#define MSG_SELFTEST_ENDSTOPS "Finecorsa (2)"
#define MSG_SELFTEST_MOTOR "Motore"
#define MSG_SELFTEST_ENDSTOP "Finecorsa"
#define MSG_SELFTEST_ENDSTOP_NOTHIT "Finec. fuori por."
#define MSG_SELFTEST_OK "Autotest OK"
#define(length=20) MSG_SELFTEST_FAN "Prova del ventilator";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Vent di stampa ant.?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Vent SX sull'ugello?";
#define MSG_SELFTEST_FAN_YES "Gira";
#define MSG_SELFTEST_FAN_NO "Non si gira";
#define MSG_STATS_TOTALFILAMENT "Filamento tot:"
#define MSG_STATS_TOTALPRINTTIME "Tempo stampa tot:"
#define MSG_STATS_FILAMENTUSED "Filamento usato:"
#define MSG_STATS_PRINTTIME "Tempo di stampa:"
#define MSG_SELFTEST_START "Avvia autotest"
#define MSG_SELFTEST_CHECK_ENDSTOPS "Verifica finecorsa"
#define MSG_SELFTEST_CHECK_HOTEND "Verifica ugello"
#define MSG_SELFTEST_CHECK_X "Verifica asse X"
#define MSG_SELFTEST_CHECK_Y "Verifica asse Y"
#define MSG_SELFTEST_CHECK_Z "Verifica asse Z"
#define MSG_SELFTEST_CHECK_BED "Verifica letto"
#define MSG_SELFTEST_CHECK_ALLCORRECT "Nessun errore"
#define MSG_SELFTEST "Autotest"
#define MSG_SELFTEST_FAILED "Autotest fallito"
#define MSG_STATISTICS "Statistiche"
#define MSG_USB_PRINTING "Stampa da USB"
#define MSG_HOMEYZ "Calibra Z"
#define MSG_HOMEYZ_PROGRESS "Calibrando Z"
#define MSG_HOMEYZ_DONE "Calibrazione OK"
#define MSG_SHOW_END_STOPS "Stato finecorsa"
#define MSG_CALIBRATE_BED "Calibra XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
#define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
#define MSG_CONFIRM_NOZZLE_CLEAN "Pulire l'ugello per la calibrazione, poi fare click."
#define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "I carrelli Z sin/des sono altezza max?"
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Ricerca del letto punto di calibraz."
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " su 4"
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Perfezion. il letto punto di calibraz."
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " su 9"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Misurare l'altezza di riferimento del punto di calibrazione"
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " su 9"
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiterazione "
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato."
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibrazione XYZ fallita. Si prega di consultare il manuale."
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
#define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
#define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."
#define MSG_BED_LEVELING_FAILED_POINT_LOW "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset."
#define MSG_BED_LEVELING_FAILED_POINT_HIGH "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset."
#define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset."
#define MSG_NEW_FIRMWARE_AVAILABLE "Nuova versione del firmware disponibile"
#define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prega aggiorna."
#define MSG_FOLLOW_CALIBRATION_FLOW "Stampante ancora non calibrata. Si prega di seguire il manuale, capitolo PRIMI PASSI, sezione della calibrazione."
#define MSG_BABYSTEP_Z_NOT_SET "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration."
#define MSG_BED_CORRECTION_MENU "Correz. liv.letto"
#define MSG_BED_CORRECTION_LEFT "Sinistra [um]"
#define MSG_BED_CORRECTION_RIGHT "Destra [um]"
#define MSG_BED_CORRECTION_FRONT "Fronte [um]"
#define MSG_BED_CORRECTION_REAR "Retro [um]"
#define MSG_BED_CORRECTION_RESET "Reset"
#define MSG_MESH_BED_LEVELING "Mesh livel. letto"
#define MSG_MENU_CALIBRATION "Calibrazione"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
#define MSG_LOOSE_PULLEY "Puleggia lenta"
#define MSG_FILAMENT_LOADING_T0 "Inserire filamento nell'estrusore 1. Click per continuare."
#define MSG_FILAMENT_LOADING_T1 "Inserire filamento nell'estrusore 2. Click per continuare."
#define MSG_FILAMENT_LOADING_T2 "Inserire filamento nell'estrusore 3. Click per continuare."
#define MSG_FILAMENT_LOADING_T3 "Inserire filamento nell'estrusore 4. Click per continuare."
#define MSG_CHANGE_EXTR "Cambio estrusore."
#define MSG_FIL_ADJUSTING "Filamento in fase di regolazione. Attendere prego."
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."
#define MSG_CALIBRATE_E "Calibra E"
#define MSG_E_CAL_KNOB "Girare la manopola affinche' il segno raggiunga il corpo dell'estrusore. Click per continuare."
#define MSG_MARK_FIL "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare."
#define MSG_CLEAN_NOZZLE_E "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare."
#define MSG_WAITING_TEMP "In attesa del raffreddamento della testina e del piatto"
#define MSG_FILAMENT_CLEAN "Il colore e' nitido?"
#define MSG_UNLOADING_FILAMENT "Rilasc. filamento"
#define MSG_PAPER "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."
#define MSG_FINISHING_MOVEMENTS "Arresto in corso"
#define MSG_PRINT_PAUSED "Stampa in pausa"
#define MSG_RESUMING_PRINT "Stampa in ripresa"
#define MSG_PID_EXTRUDER "Calibrazione PID"
#define MSG_SET_TEMPERATURE "Imposta temperatura"
#define MSG_PID_FINISHED "Cal. PID completa"
#define MSG_PID_RUNNING "Cal. PID"
#define MSG_CALIBRATE_PINDA "Calibrare"
#define MSG_CALIBRATION_PINDA_MENU "Taratura temp."
#define MSG_PINDA_NOT_CALIBRATED "Taratura della temperatura non ancora eseguita"
#define MSG_PINDA_PREHEAT "Riscald. PINDA"
#define MSG_TEMP_CALIBRATION "Cal. temp. "
#define MSG_TEMP_CALIBRATION_DONE "Taratura temperatura terminata. Fare click per continuare."
#define MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
#define MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
#define MSG_LOAD_ALL "Caricare tutti"
#define MSG_LOAD_FILAMENT_1 "Caricare fil. 1"
#define MSG_LOAD_FILAMENT_2 "Caricare fil. 2"
#define MSG_LOAD_FILAMENT_3 "Caricare fil. 3"
#define MSG_LOAD_FILAMENT_4 "Caricare fil. 4"
#define MSG_UNLOAD_FILAMENT_1 "Rilasciare fil. 1"
#define MSG_UNLOAD_FILAMENT_2 "Rilasciare fil. 1"
#define MSG_UNLOAD_FILAMENT_3 "Rilasciare fil. 1"
#define MSG_UNLOAD_FILAMENT_4 "Rilasciare fil. 1"
#define MSG_UNLOAD_ALL "Rilasciare tutti"
#define MSG_PREPARE_FILAMENT "Preparare filamento"
#define MSG_ALL "Tutti"
#define MSG_USED "Usati nella stampa"
#define MSG_CURRENT "Attuale"

4812
Firmware/mesh_bed_calibration.cpp
View File

File diff suppressed because it is too large Load Diff

364
Firmware/mesh_bed_calibration.h
View File

@ -1,182 +1,182 @@
#ifndef MESH_BED_CALIBRATION_H
#define MESH_BED_CALIBRATION_H
// Exact positions of the print head above the bed reference points, in the world coordinates.
// The world coordinates match the machine coordinates only in case, when the machine
// is built properly, the end stops are at the correct positions and the axes are perpendicular.
extern const float bed_ref_points[] PROGMEM;
// Is the world2machine correction activated?
enum World2MachineCorrectionMode
{
WORLD2MACHINE_CORRECTION_NONE = 0,
WORLD2MACHINE_CORRECTION_SHIFT = 1,
WORLD2MACHINE_CORRECTION_SKEW = 2,
};
extern uint8_t world2machine_correction_mode;
// 2x2 transformation matrix from the world coordinates to the machine coordinates.
// Corrects for the rotation and skew of the machine axes.
// Used by the planner's plan_buffer_line() and plan_set_position().
extern float world2machine_rotation_and_skew[2][2];
extern float world2machine_rotation_and_skew_inv[2][2];
// Shift of the machine zero point, in the machine coordinates.
extern float world2machine_shift[2];
// Resets the transformation to identity.
extern void world2machine_reset();
// Resets the transformation to identity and update current_position[X,Y] from the servos.
extern void world2machine_revert_to_uncorrected();
// Loads the transformation from the EEPROM, if available.
extern void world2machine_initialize();
// When switching from absolute to corrected coordinates,
// this will apply an inverse world2machine transformation
// to current_position[x,y].
extern void world2machine_update_current();
inline void world2machine(const float &x, const float &y, float &out_x, float &out_y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
out_x = x;
out_y = y;
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
out_x = world2machine_rotation_and_skew[0][0] * x + world2machine_rotation_and_skew[0][1] * y;
out_y = world2machine_rotation_and_skew[1][0] * x + world2machine_rotation_and_skew[1][1] * y;
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
out_x += world2machine_shift[0];
out_y += world2machine_shift[1];
}
}
}
inline void world2machine(float &x, float &y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
float out_x = world2machine_rotation_and_skew[0][0] * x + world2machine_rotation_and_skew[0][1] * y;
float out_y = world2machine_rotation_and_skew[1][0] * x + world2machine_rotation_and_skew[1][1] * y;
x = out_x;
y = out_y;
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
x += world2machine_shift[0];
y += world2machine_shift[1];
}
}
}
inline void machine2world(float x, float y, float &out_x, float &out_y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
out_x = x;
out_y = y;
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
x -= world2machine_shift[0];
y -= world2machine_shift[1];
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
out_x = world2machine_rotation_and_skew_inv[0][0] * x + world2machine_rotation_and_skew_inv[0][1] * y;
out_y = world2machine_rotation_and_skew_inv[1][0] * x + world2machine_rotation_and_skew_inv[1][1] * y;
}
}
}
inline void machine2world(float &x, float &y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
x -= world2machine_shift[0];
y -= world2machine_shift[1];
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
float out_x = world2machine_rotation_and_skew_inv[0][0] * x + world2machine_rotation_and_skew_inv[0][1] * y;
float out_y = world2machine_rotation_and_skew_inv[1][0] * x + world2machine_rotation_and_skew_inv[1][1] * y;
x = out_x;
y = out_y;
}
}
}
inline bool world2machine_clamp(float &x, float &y)
{
bool clamped = false;
float tmpx, tmpy;
world2machine(x, y, tmpx, tmpy);
if (tmpx < X_MIN_POS) {
tmpx = X_MIN_POS;
clamped = true;
}
if (tmpy < Y_MIN_POS) {
tmpy = Y_MIN_POS;
clamped = true;
}
if (tmpx > X_MAX_POS) {
tmpx = X_MAX_POS;
clamped = true;
}
if (tmpy > Y_MAX_POS) {
tmpy = Y_MAX_POS;
clamped = true;
}
if (clamped)
machine2world(tmpx, tmpy, x, y);
return clamped;
}
extern bool find_bed_induction_sensor_point_z(float minimum_z = -10.f, uint8_t n_iter = 3);
extern bool find_bed_induction_sensor_point_xy();
extern void go_home_with_z_lift();
// Positive or zero: ok
// Negative: failed
enum BedSkewOffsetDetectionResultType {
// Detection failed, some point was not found.
BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND = -1,
BED_SKEW_OFFSET_DETECTION_FITTING_FAILED = -2,
// Detection finished with success.
BED_SKEW_OFFSET_DETECTION_PERFECT = 0,
BED_SKEW_OFFSET_DETECTION_SKEW_MILD = 1,
BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME = 2
};
extern BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level, uint8_t &too_far_mask);
extern BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8_t verbosity_level, uint8_t &too_far_mask);
extern bool sample_mesh_and_store_reference();
extern void reset_bed_offset_and_skew();
extern bool is_bed_z_jitter_data_valid();
// Scan the mesh bed induction points one by one by a left-right zig-zag movement,
// write the trigger coordinates to the serial line.
// Useful for visualizing the behavior of the bed induction detector.
extern bool scan_bed_induction_points(int8_t verbosity_level);
// Apply Z babystep value from the EEPROM through the planner.
extern void babystep_apply();
// Undo the current Z babystep value.
extern void babystep_undo();
// Reset the current babystep counter without moving the axes.
extern void babystep_reset();
#endif /* MESH_BED_CALIBRATION_H */
#ifndef MESH_BED_CALIBRATION_H
#define MESH_BED_CALIBRATION_H
// Exact positions of the print head above the bed reference points, in the world coordinates.
// The world coordinates match the machine coordinates only in case, when the machine
// is built properly, the end stops are at the correct positions and the axes are perpendicular.
extern const float bed_ref_points[] PROGMEM;
// Is the world2machine correction activated?
enum World2MachineCorrectionMode
{
WORLD2MACHINE_CORRECTION_NONE = 0,
WORLD2MACHINE_CORRECTION_SHIFT = 1,
WORLD2MACHINE_CORRECTION_SKEW = 2,
};
extern uint8_t world2machine_correction_mode;
// 2x2 transformation matrix from the world coordinates to the machine coordinates.
// Corrects for the rotation and skew of the machine axes.
// Used by the planner's plan_buffer_line() and plan_set_position().
extern float world2machine_rotation_and_skew[2][2];
extern float world2machine_rotation_and_skew_inv[2][2];
// Shift of the machine zero point, in the machine coordinates.
extern float world2machine_shift[2];
// Resets the transformation to identity.
extern void world2machine_reset();
// Resets the transformation to identity and update current_position[X,Y] from the servos.
extern void world2machine_revert_to_uncorrected();
// Loads the transformation from the EEPROM, if available.
extern void world2machine_initialize();
// When switching from absolute to corrected coordinates,
// this will apply an inverse world2machine transformation
// to current_position[x,y].
extern void world2machine_update_current();
inline void world2machine(const float &x, const float &y, float &out_x, float &out_y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
out_x = x;
out_y = y;
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
out_x = world2machine_rotation_and_skew[0][0] * x + world2machine_rotation_and_skew[0][1] * y;
out_y = world2machine_rotation_and_skew[1][0] * x + world2machine_rotation_and_skew[1][1] * y;
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
out_x += world2machine_shift[0];
out_y += world2machine_shift[1];
}
}
}
inline void world2machine(float &x, float &y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
float out_x = world2machine_rotation_and_skew[0][0] * x + world2machine_rotation_and_skew[0][1] * y;
float out_y = world2machine_rotation_and_skew[1][0] * x + world2machine_rotation_and_skew[1][1] * y;
x = out_x;
y = out_y;
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
x += world2machine_shift[0];
y += world2machine_shift[1];
}
}
}
inline void machine2world(float x, float y, float &out_x, float &out_y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
out_x = x;
out_y = y;
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
x -= world2machine_shift[0];
y -= world2machine_shift[1];
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
out_x = world2machine_rotation_and_skew_inv[0][0] * x + world2machine_rotation_and_skew_inv[0][1] * y;
out_y = world2machine_rotation_and_skew_inv[1][0] * x + world2machine_rotation_and_skew_inv[1][1] * y;
}
}
}
inline void machine2world(float &x, float &y)
{
if (world2machine_correction_mode == WORLD2MACHINE_CORRECTION_NONE) {
// No correction.
} else {
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SHIFT) {
// Then add the offset.
x -= world2machine_shift[0];
y -= world2machine_shift[1];
}
if (world2machine_correction_mode & WORLD2MACHINE_CORRECTION_SKEW) {
// Firs the skew & rotation correction.
float out_x = world2machine_rotation_and_skew_inv[0][0] * x + world2machine_rotation_and_skew_inv[0][1] * y;
float out_y = world2machine_rotation_and_skew_inv[1][0] * x + world2machine_rotation_and_skew_inv[1][1] * y;
x = out_x;
y = out_y;
}
}
}
inline bool world2machine_clamp(float &x, float &y)
{
bool clamped = false;
float tmpx, tmpy;
world2machine(x, y, tmpx, tmpy);
if (tmpx < X_MIN_POS) {
tmpx = X_MIN_POS;
clamped = true;
}
if (tmpy < Y_MIN_POS) {
tmpy = Y_MIN_POS;
clamped = true;
}
if (tmpx > X_MAX_POS) {
tmpx = X_MAX_POS;
clamped = true;
}
if (tmpy > Y_MAX_POS) {
tmpy = Y_MAX_POS;
clamped = true;
}
if (clamped)
machine2world(tmpx, tmpy, x, y);
return clamped;
}
extern bool find_bed_induction_sensor_point_z(float minimum_z = -10.f, uint8_t n_iter = 3);
extern bool find_bed_induction_sensor_point_xy();
extern void go_home_with_z_lift();
// Positive or zero: ok
// Negative: failed
enum BedSkewOffsetDetectionResultType {
// Detection failed, some point was not found.
BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND = -1,
BED_SKEW_OFFSET_DETECTION_FITTING_FAILED = -2,
// Detection finished with success.
BED_SKEW_OFFSET_DETECTION_PERFECT = 0,
BED_SKEW_OFFSET_DETECTION_SKEW_MILD = 1,
BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME = 2
};
extern BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level, uint8_t &too_far_mask);
extern BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8_t verbosity_level, uint8_t &too_far_mask);
extern bool sample_mesh_and_store_reference();
extern void reset_bed_offset_and_skew();
extern bool is_bed_z_jitter_data_valid();
// Scan the mesh bed induction points one by one by a left-right zig-zag movement,
// write the trigger coordinates to the serial line.
// Useful for visualizing the behavior of the bed induction detector.
extern bool scan_bed_induction_points(int8_t verbosity_level);
// Apply Z babystep value from the EEPROM through the planner.
extern void babystep_apply();
// Undo the current Z babystep value.
extern void babystep_undo();
// Reset the current babystep counter without moving the axes.
extern void babystep_reset();
#endif /* MESH_BED_CALIBRATION_H */

3972
Firmware/temperature.cpp
View File

File diff suppressed because it is too large Load Diff

422
Firmware/temperature.h
View File

@ -1,211 +1,211 @@
/*
temperature.h - temperature controller
Part of Marlin
Copyright (c) 2011 Erik van der Zalm
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef temperature_h
#define temperature_h
#include "Marlin.h"
#include "planner.h"
#ifdef PID_ADD_EXTRUSION_RATE
#include "stepper.h"
#endif
// public functions
void tp_init(); //initialize the heating
void manage_heater(); //it is critical that this is called periodically.
#ifdef FILAMENT_SENSOR
// For converting raw Filament Width to milimeters
float analog2widthFil();
// For converting raw Filament Width to an extrusion ratio
int widthFil_to_size_ratio();
#endif
// low level conversion routines
// do not use these routines and variables outside of temperature.cpp
extern int target_temperature[EXTRUDERS];
extern float current_temperature[EXTRUDERS];
#ifdef SHOW_TEMP_ADC_VALUES
extern int current_temperature_raw[EXTRUDERS];
extern int current_temperature_bed_raw;
#endif
extern int target_temperature_bed;
extern float current_temperature_bed;
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
extern float redundant_temperature;
#endif
#if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
extern unsigned char soft_pwm_bed;
#endif
#ifdef PIDTEMP
extern int pid_cycle, pid_number_of_cycles;
extern float Kp,Ki,Kd,Kc,_Kp,_Ki,_Kd;
extern bool pid_tuning_finished;
float scalePID_i(float i);
float scalePID_d(float d);
float unscalePID_i(float i);
float unscalePID_d(float d);
#endif
#ifdef PIDTEMPBED
extern float bedKp,bedKi,bedKd;
#endif
#ifdef BABYSTEPPING
extern volatile int babystepsTodo[3];
#endif
inline void babystepsTodoZadd(int n)
{
if (n != 0) {
CRITICAL_SECTION_START
babystepsTodo[Z_AXIS] += n;
CRITICAL_SECTION_END
}
}
inline void babystepsTodoZsubtract(int n)
{
if (n != 0) {
CRITICAL_SECTION_START
babystepsTodo[Z_AXIS] -= n;
CRITICAL_SECTION_END
}
}
//high level conversion routines, for use outside of temperature.cpp
//inline so that there is no performance decrease.
//deg=degreeCelsius
FORCE_INLINE float degHotend(uint8_t extruder) {
return current_temperature[extruder];
};
#ifdef SHOW_TEMP_ADC_VALUES
FORCE_INLINE float rawHotendTemp(uint8_t extruder) {
return current_temperature_raw[extruder];
};
FORCE_INLINE float rawBedTemp() {
return current_temperature_bed_raw;
};
#endif
FORCE_INLINE float degBed() {
return current_temperature_bed;
};
FORCE_INLINE float degTargetHotend(uint8_t extruder) {
return target_temperature[extruder];
};
FORCE_INLINE float degTargetBed() {
return target_temperature_bed;
};
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) {
target_temperature[extruder] = celsius;
};
FORCE_INLINE void setTargetBed(const float &celsius) {
target_temperature_bed = celsius;
};
FORCE_INLINE bool isHeatingHotend(uint8_t extruder){
return target_temperature[extruder] > current_temperature[extruder];
};
FORCE_INLINE bool isHeatingBed() {
return target_temperature_bed > current_temperature_bed;
};
FORCE_INLINE bool isCoolingHotend(uint8_t extruder) {
return target_temperature[extruder] < current_temperature[extruder];
};
FORCE_INLINE bool isCoolingBed() {
return target_temperature_bed < current_temperature_bed;
};
#define degHotend0() degHotend(0)
#define degTargetHotend0() degTargetHotend(0)
#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0)
#define isHeatingHotend0() isHeatingHotend(0)
#define isCoolingHotend0() isCoolingHotend(0)
#if EXTRUDERS > 1
#define degHotend1() degHotend(1)
#define degTargetHotend1() degTargetHotend(1)
#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
#define isHeatingHotend1() isHeatingHotend(1)
#define isCoolingHotend1() isCoolingHotend(1)
#else
#define setTargetHotend1(_celsius) do{}while(0)
#endif
#if EXTRUDERS > 2
#define degHotend2() degHotend(2)
#define degTargetHotend2() degTargetHotend(2)
#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
#define isHeatingHotend2() isHeatingHotend(2)
#define isCoolingHotend2() isCoolingHotend(2)
#else
#define setTargetHotend2(_celsius) do{}while(0)
#endif
#if EXTRUDERS > 3
#error Invalid number of extruders
#endif
#if (defined (TEMP_RUNAWAY_BED_HYSTERESIS) && TEMP_RUNAWAY_BED_TIMEOUT > 0) || (defined (TEMP_RUNAWAY_EXTRUDER_HYSTERESIS) && TEMP_RUNAWAY_EXTRUDER_TIMEOUT > 0)
static float temp_runaway_status[4];
static float temp_runaway_target[4];
static float temp_runaway_timer[4];
static int temp_runaway_error_counter[4];
void temp_runaway_check(int _heater_id, float _target_temperature, float _current_temperature, float _output, bool _isbed);
void temp_runaway_stop(bool isPreheat, bool isBed);
#endif
int getHeaterPower(int heater);
void disable_heater();
void setWatch();
void updatePID();
FORCE_INLINE void autotempShutdown(){
#ifdef AUTOTEMP
if(autotemp_enabled)
{
autotemp_enabled=false;
if(degTargetHotend(active_extruder)>autotemp_min)
setTargetHotend(0,active_extruder);
}
#endif
}
void PID_autotune(float temp, int extruder, int ncycles);
void setExtruderAutoFanState(int pin, bool state);
void checkExtruderAutoFans();
#endif
/*
temperature.h - temperature controller
Part of Marlin
Copyright (c) 2011 Erik van der Zalm
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef temperature_h
#define temperature_h
#include "Marlin.h"
#include "planner.h"
#ifdef PID_ADD_EXTRUSION_RATE
#include "stepper.h"
#endif
// public functions
void tp_init(); //initialize the heating
void manage_heater(); //it is critical that this is called periodically.
#ifdef FILAMENT_SENSOR
// For converting raw Filament Width to milimeters
float analog2widthFil();
// For converting raw Filament Width to an extrusion ratio
int widthFil_to_size_ratio();
#endif
// low level conversion routines
// do not use these routines and variables outside of temperature.cpp
extern int target_temperature[EXTRUDERS];
extern float current_temperature[EXTRUDERS];
#ifdef SHOW_TEMP_ADC_VALUES
extern int current_temperature_raw[EXTRUDERS];
extern int current_temperature_bed_raw;
#endif
extern int target_temperature_bed;
extern float current_temperature_bed;
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
extern float redundant_temperature;
#endif
#if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
extern unsigned char soft_pwm_bed;
#endif
#ifdef PIDTEMP
extern int pid_cycle, pid_number_of_cycles;
extern float Kp,Ki,Kd,Kc,_Kp,_Ki,_Kd;
extern bool pid_tuning_finished;
float scalePID_i(float i);
float scalePID_d(float d);
float unscalePID_i(float i);
float unscalePID_d(float d);
#endif
#ifdef PIDTEMPBED
extern float bedKp,bedKi,bedKd;
#endif
#ifdef BABYSTEPPING
extern volatile int babystepsTodo[3];
#endif
inline void babystepsTodoZadd(int n)
{
if (n != 0) {
CRITICAL_SECTION_START
babystepsTodo[Z_AXIS] += n;
CRITICAL_SECTION_END
}
}
inline void babystepsTodoZsubtract(int n)
{
if (n != 0) {
CRITICAL_SECTION_START
babystepsTodo[Z_AXIS] -= n;
CRITICAL_SECTION_END
}
}
//high level conversion routines, for use outside of temperature.cpp
//inline so that there is no performance decrease.
//deg=degreeCelsius
FORCE_INLINE float degHotend(uint8_t extruder) {
return current_temperature[extruder];
};
#ifdef SHOW_TEMP_ADC_VALUES
FORCE_INLINE float rawHotendTemp(uint8_t extruder) {
return current_temperature_raw[extruder];
};
FORCE_INLINE float rawBedTemp() {
return current_temperature_bed_raw;
};
#endif
FORCE_INLINE float degBed() {
return current_temperature_bed;
};
FORCE_INLINE float degTargetHotend(uint8_t extruder) {
return target_temperature[extruder];
};
FORCE_INLINE float degTargetBed() {
return target_temperature_bed;
};
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) {
target_temperature[extruder] = celsius;
};
FORCE_INLINE void setTargetBed(const float &celsius) {
target_temperature_bed = celsius;
};
FORCE_INLINE bool isHeatingHotend(uint8_t extruder){
return target_temperature[extruder] > current_temperature[extruder];
};
FORCE_INLINE bool isHeatingBed() {
return target_temperature_bed > current_temperature_bed;
};
FORCE_INLINE bool isCoolingHotend(uint8_t extruder) {
return target_temperature[extruder] < current_temperature[extruder];
};
FORCE_INLINE bool isCoolingBed() {
return target_temperature_bed < current_temperature_bed;
};
#define degHotend0() degHotend(0)
#define degTargetHotend0() degTargetHotend(0)
#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0)
#define isHeatingHotend0() isHeatingHotend(0)
#define isCoolingHotend0() isCoolingHotend(0)
#if EXTRUDERS > 1
#define degHotend1() degHotend(1)
#define degTargetHotend1() degTargetHotend(1)
#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
#define isHeatingHotend1() isHeatingHotend(1)
#define isCoolingHotend1() isCoolingHotend(1)
#else
#define setTargetHotend1(_celsius) do{}while(0)
#endif
#if EXTRUDERS > 2
#define degHotend2() degHotend(2)
#define degTargetHotend2() degTargetHotend(2)
#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
#define isHeatingHotend2() isHeatingHotend(2)
#define isCoolingHotend2() isCoolingHotend(2)
#else
#define setTargetHotend2(_celsius) do{}while(0)
#endif
#if EXTRUDERS > 3
#error Invalid number of extruders
#endif
#if (defined (TEMP_RUNAWAY_BED_HYSTERESIS) && TEMP_RUNAWAY_BED_TIMEOUT > 0) || (defined (TEMP_RUNAWAY_EXTRUDER_HYSTERESIS) && TEMP_RUNAWAY_EXTRUDER_TIMEOUT > 0)
static float temp_runaway_status[4];
static float temp_runaway_target[4];
static float temp_runaway_timer[4];
static int temp_runaway_error_counter[4];
void temp_runaway_check(int _heater_id, float _target_temperature, float _current_temperature, float _output, bool _isbed);
void temp_runaway_stop(bool isPreheat, bool isBed);
#endif
int getHeaterPower(int heater);
void disable_heater();
void setWatch();
void updatePID();
FORCE_INLINE void autotempShutdown(){
#ifdef AUTOTEMP
if(autotemp_enabled)
{
autotemp_enabled=false;
if(degTargetHotend(active_extruder)>autotemp_min)
setTargetHotend(0,active_extruder);
}
#endif
}
void PID_autotune(float temp, int extruder, int ncycles);
void setExtruderAutoFanState(int pin, bool state);
void checkExtruderAutoFans();
#endif

576
Firmware/util.cpp
View File

@ -1,288 +1,288 @@
#include "Configuration.h"
#include "ultralcd.h"
#include "language.h"
#include "util.h"
// Allocate the version string in the program memory. Otherwise the string lands either on the stack or in the global RAM.
const char FW_VERSION_STR[] PROGMEM = FW_version;
const char* FW_VERSION_STR_P()
{
return FW_VERSION_STR;
}
const char FW_PRUSA3D_MAGIC_STR[] PROGMEM = FW_PRUSA3D_MAGIC;
const char* FW_PRUSA3D_MAGIC_STR_P()
{
return FW_PRUSA3D_MAGIC_STR;
}
const char STR_REVISION_DEV [] PROGMEM = "dev";
const char STR_REVISION_ALPHA[] PROGMEM = "alpha";
const char STR_REVISION_BETA [] PROGMEM = "beta";
const char STR_REVISION_RC [] PROGMEM = "rc";
inline bool is_whitespace_or_nl(char c)
{
return c == ' ' || c == '\t' || c == '\n' || c == 'r';
}
inline bool is_whitespace_or_nl_or_eol(char c)
{
return c == 0 || c == ' ' || c == '\t' || c == '\n' || c == '\r';
}
inline bool is_digit(char c)
{
return c >= '0' && c <= '9';
}
// Parse a major.minor.revision version number.
// Return true if valid.
inline bool parse_version(const char *str, uint16_t version[4])
{
#if 0
SERIAL_ECHOPGM("Parsing version string ");
SERIAL_ECHO(str);
SERIAL_ECHOLNPGM("");
#endif
const char *major = str;
const char *p = str;
while (is_digit(*p)) ++ p;
if (*p != '.')
return false;
const char *minor = ++ p;
while (is_digit(*p)) ++ p;
if (*p != '.')
return false;
const char *rev = ++ p;
while (is_digit(*p)) ++ p;
if (! is_whitespace_or_nl_or_eol(*p) && *p != '-')
return false;
char *endptr = NULL;
version[0] = strtol(major, &endptr, 10);
if (endptr != minor - 1)
return false;
version[1] = strtol(minor, &endptr, 10);
if (endptr != rev - 1)
return false;
version[2] = strtol(rev, &endptr, 10);
if (endptr != p)
return false;
version[3] = FIRMWARE_REVISION_RELEASED;
if (*p ++ == '-') {
const char *q = p;
while (! is_whitespace_or_nl_or_eol(*q))
++ q;
uint8_t n = q - p;
if (n == strlen_P(STR_REVISION_DEV) && strncmp_P(p, STR_REVISION_DEV, n) == 0)
version[3] = FIRMWARE_REVISION_DEV;
else if (n == strlen_P(STR_REVISION_ALPHA) && strncmp_P(p, STR_REVISION_ALPHA, n) == 0)
version[3] = FIRMWARE_REVISION_ALPHA;
else if (n == strlen_P(STR_REVISION_BETA) && strncmp_P(p, STR_REVISION_BETA, n) == 0)
version[3] = FIRMWARE_REVISION_BETA;
else if ((n == 2 || n == 3) && p[0] == 'r' && p[1] == 'c') {
if (n == 2)
version[3] = FIRMWARE_REVISION_RC;
else {
if (is_digit(p[2]))
version[3] = FIRMWARE_REVISION_RC + p[2] - '1';
else
return false;
}
} else
return false;
}
#if 0
SERIAL_ECHOPGM("Version parsed, major: ");
SERIAL_ECHO(version[0]);
SERIAL_ECHOPGM(", minor: ");
SERIAL_ECHO(version[1]);
SERIAL_ECHOPGM(", revision: ");
SERIAL_ECHO(version[2]);
SERIAL_ECHOPGM(", flavor: ");
SERIAL_ECHO(version[3]);
SERIAL_ECHOLNPGM("");
#endif
return true;
}
inline bool strncmp_PP(const char *p1, const char *p2, uint8_t n)
{
for (; n > 0; -- n, ++ p1, ++ p2) {
if (pgm_read_byte(p1) < pgm_read_byte(p2))
return -1;
if (pgm_read_byte(p1) > pgm_read_byte(p2))
return 1;
if (pgm_read_byte(p1) == 0)
return 0;
}
return 0;
}
// Parse a major.minor.revision version number.
// Return true if valid.
inline bool parse_version_P(const char *str, uint16_t version[4])
{
#if 0
SERIAL_ECHOPGM("Parsing version string ");
SERIAL_ECHORPGM(str);
SERIAL_ECHOLNPGM("");
#endif
const char *major = str;
const char *p = str;
while (is_digit(char(pgm_read_byte(p)))) ++ p;
if (pgm_read_byte(p) != '.')
return false;
const char *minor = ++ p;
while (is_digit(char(pgm_read_byte(p)))) ++ p;
if (pgm_read_byte(p) != '.')
return false;
const char *rev = ++ p;
while (is_digit(char(pgm_read_byte(p)))) ++ p;
if (! is_whitespace_or_nl_or_eol(char(pgm_read_byte(p))) && pgm_read_byte(p) != '-')
return false;
char buf[5];
uint8_t n = minor - major - 1;
if (n > 4)
return false;
memcpy_P(buf, major, n); buf[n] = 0;
char *endptr = NULL;
version[0] = strtol(buf, &endptr, 10);
if (*endptr != 0)
return false;
n = rev - minor - 1;
if (n > 4)
return false;
memcpy_P(buf, minor, n); buf[n] = 0;
version[1] = strtol(buf, &endptr, 10);
if (*endptr != 0)
return false;
n = p - rev;
if (n > 4)
return false;
memcpy_P(buf, rev, n);
buf[n] = 0;
version[2] = strtol(buf, &endptr, 10);
if (*endptr != 0)
return false;
version[3] = FIRMWARE_REVISION_RELEASED;
if (pgm_read_byte(p ++) == '-') {
const char *q = p;
while (! is_whitespace_or_nl_or_eol(char(pgm_read_byte(q))))
++ q;
n = q - p;
if (n == strlen_P(STR_REVISION_DEV) && strncmp_PP(p, STR_REVISION_DEV, n) == 0)
version[3] = FIRMWARE_REVISION_DEV;
else if (n == strlen_P(STR_REVISION_ALPHA) && strncmp_PP(p, STR_REVISION_ALPHA, n) == 0)
version[3] = FIRMWARE_REVISION_ALPHA;
else if (n == strlen_P(STR_REVISION_BETA) && strncmp_PP(p, STR_REVISION_BETA, n) == 0)
version[3] = FIRMWARE_REVISION_BETA;
else if ((n == 2 || n == 3) && strncmp_PP(p, STR_REVISION_RC, 2) == 0) {
if (n == 2)
version[3] = FIRMWARE_REVISION_RC;
else {
p += 2;
if (is_digit(pgm_read_byte(p)))
version[3] = FIRMWARE_REVISION_RC + pgm_read_byte(p) - '1';
else
return false;
}
} else
return false;
}
#if 0
SERIAL_ECHOPGM("Version parsed, major: ");
SERIAL_ECHO(version[0]);
SERIAL_ECHOPGM(", minor: ");
SERIAL_ECHO(version[1]);
SERIAL_ECHOPGM(", revision: ");
SERIAL_ECHO(version[2]);
SERIAL_ECHOPGM(", flavor: ");
SERIAL_ECHO(version[3]);
SERIAL_ECHOLNPGM("");
#endif
return true;
}
// 1 - yes, 0 - false, -1 - error;
inline int8_t is_provided_version_newer(const char *version_string)
{
uint16_t ver_gcode[3], ver_current[3];
if (! parse_version(version_string, ver_gcode))
return -1;
if (! parse_version_P(FW_VERSION_STR, ver_current))
return 0; // this shall not happen
for (uint8_t i = 0; i < 3; ++ i)
if (ver_gcode[i] > ver_current[i])
return 1;
return 0;
}
bool show_upgrade_dialog_if_version_newer(const char *version_string)
{
uint16_t ver_gcode[4], ver_current[4];
if (! parse_version(version_string, ver_gcode)) {
// SERIAL_PROTOCOLLNPGM("parse_version failed");
return false;
}
if (! parse_version_P(FW_VERSION_STR, ver_current)) {
// SERIAL_PROTOCOLLNPGM("parse_version_P failed");
return false; // this shall not happen
}
// SERIAL_PROTOCOLLNPGM("versions parsed");
bool upgrade = false;
for (uint8_t i = 0; i < 4; ++ i) {
if (ver_gcode[i] > ver_current[i]) {
upgrade = true;
break;
} else if (ver_gcode[i] < ver_current[i])
break;
}
if (upgrade) {
lcd_display_message_fullscreen_P(MSG_NEW_FIRMWARE_AVAILABLE);
lcd_print_at_PGM(0, 2, PSTR(""));
for (const char *c = version_string; ! is_whitespace_or_nl_or_eol(*c); ++ c)
lcd_implementation_write(*c);
lcd_print_at_PGM(0, 3, MSG_NEW_FIRMWARE_PLEASE_UPGRADE);
tone(BEEPER, 1000);
delay_keep_alive(50);
noTone(BEEPER);
delay_keep_alive(500);
tone(BEEPER, 1000);
delay_keep_alive(50);
noTone(BEEPER);
lcd_wait_for_click();
lcd_update_enable(true);
lcd_implementation_clear();
lcd_update();
}
// Succeeded.
return true;
}
void update_current_firmware_version_to_eeprom()
{
for (int8_t i = 0; i < FW_PRUSA3D_MAGIC_LEN; ++ i)
eeprom_update_byte((uint8_t*)(EEPROM_FIRMWARE_PRUSA_MAGIC+i), pgm_read_byte(FW_PRUSA3D_MAGIC_STR+i));
uint16_t ver_current[4];
if (parse_version_P(FW_VERSION_STR, ver_current)) {
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_MAJOR, ver_current[0]);
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_MINOR, ver_current[1]);
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_REVISION, ver_current[2]);
// See FirmwareRevisionFlavorType for the definition of firmware flavors.
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_FLAVOR, ver_current[3]);
}
}
#include "Configuration.h"
#include "ultralcd.h"
#include "language.h"
#include "util.h"
// Allocate the version string in the program memory. Otherwise the string lands either on the stack or in the global RAM.
const char FW_VERSION_STR[] PROGMEM = FW_version;
const char* FW_VERSION_STR_P()
{
return FW_VERSION_STR;
}
const char FW_PRUSA3D_MAGIC_STR[] PROGMEM = FW_PRUSA3D_MAGIC;
const char* FW_PRUSA3D_MAGIC_STR_P()
{
return FW_PRUSA3D_MAGIC_STR;
}
const char STR_REVISION_DEV [] PROGMEM = "dev";
const char STR_REVISION_ALPHA[] PROGMEM = "alpha";
const char STR_REVISION_BETA [] PROGMEM = "beta";
const char STR_REVISION_RC [] PROGMEM = "rc";
inline bool is_whitespace_or_nl(char c)
{
return c == ' ' || c == '\t' || c == '\n' || c == 'r';
}
inline bool is_whitespace_or_nl_or_eol(char c)
{
return c == 0 || c == ' ' || c == '\t' || c == '\n' || c == '\r';
}
inline bool is_digit(char c)
{
return c >= '0' && c <= '9';
}
// Parse a major.minor.revision version number.
// Return true if valid.
inline bool parse_version(const char *str, uint16_t version[4])
{
#if 0
SERIAL_ECHOPGM("Parsing version string ");
SERIAL_ECHO(str);
SERIAL_ECHOLNPGM("");
#endif
const char *major = str;
const char *p = str;
while (is_digit(*p)) ++ p;
if (*p != '.')
return false;
const char *minor = ++ p;
while (is_digit(*p)) ++ p;
if (*p != '.')
return false;
const char *rev = ++ p;
while (is_digit(*p)) ++ p;
if (! is_whitespace_or_nl_or_eol(*p) && *p != '-')
return false;
char *endptr = NULL;
version[0] = strtol(major, &endptr, 10);
if (endptr != minor - 1)
return false;
version[1] = strtol(minor, &endptr, 10);
if (endptr != rev - 1)
return false;
version[2] = strtol(rev, &endptr, 10);
if (endptr != p)
return false;
version[3] = FIRMWARE_REVISION_RELEASED;
if (*p ++ == '-') {
const char *q = p;
while (! is_whitespace_or_nl_or_eol(*q))
++ q;
uint8_t n = q - p;
if (n == strlen_P(STR_REVISION_DEV) && strncmp_P(p, STR_REVISION_DEV, n) == 0)
version[3] = FIRMWARE_REVISION_DEV;
else if (n == strlen_P(STR_REVISION_ALPHA) && strncmp_P(p, STR_REVISION_ALPHA, n) == 0)
version[3] = FIRMWARE_REVISION_ALPHA;
else if (n == strlen_P(STR_REVISION_BETA) && strncmp_P(p, STR_REVISION_BETA, n) == 0)
version[3] = FIRMWARE_REVISION_BETA;
else if ((n == 2 || n == 3) && p[0] == 'r' && p[1] == 'c') {
if (n == 2)
version[3] = FIRMWARE_REVISION_RC;
else {
if (is_digit(p[2]))
version[3] = FIRMWARE_REVISION_RC + p[2] - '1';
else
return false;
}
} else
return false;
}
#if 0
SERIAL_ECHOPGM("Version parsed, major: ");
SERIAL_ECHO(version[0]);
SERIAL_ECHOPGM(", minor: ");
SERIAL_ECHO(version[1]);
SERIAL_ECHOPGM(", revision: ");
SERIAL_ECHO(version[2]);
SERIAL_ECHOPGM(", flavor: ");
SERIAL_ECHO(version[3]);
SERIAL_ECHOLNPGM("");
#endif
return true;
}
inline bool strncmp_PP(const char *p1, const char *p2, uint8_t n)
{
for (; n > 0; -- n, ++ p1, ++ p2) {
if (pgm_read_byte(p1) < pgm_read_byte(p2))
return -1;
if (pgm_read_byte(p1) > pgm_read_byte(p2))
return 1;
if (pgm_read_byte(p1) == 0)
return 0;
}
return 0;
}
// Parse a major.minor.revision version number.
// Return true if valid.
inline bool parse_version_P(const char *str, uint16_t version[4])
{
#if 0
SERIAL_ECHOPGM("Parsing version string ");
SERIAL_ECHORPGM(str);
SERIAL_ECHOLNPGM("");
#endif
const char *major = str;
const char *p = str;
while (is_digit(char(pgm_read_byte(p)))) ++ p;
if (pgm_read_byte(p) != '.')
return false;
const char *minor = ++ p;
while (is_digit(char(pgm_read_byte(p)))) ++ p;
if (pgm_read_byte(p) != '.')
return false;
const char *rev = ++ p;
while (is_digit(char(pgm_read_byte(p)))) ++ p;
if (! is_whitespace_or_nl_or_eol(char(pgm_read_byte(p))) && pgm_read_byte(p) != '-')
return false;
char buf[5];
uint8_t n = minor - major - 1;
if (n > 4)
return false;
memcpy_P(buf, major, n); buf[n] = 0;
char *endptr = NULL;
version[0] = strtol(buf, &endptr, 10);
if (*endptr != 0)
return false;
n = rev - minor - 1;
if (n > 4)
return false;
memcpy_P(buf, minor, n); buf[n] = 0;
version[1] = strtol(buf, &endptr, 10);
if (*endptr != 0)
return false;
n = p - rev;
if (n > 4)
return false;
memcpy_P(buf, rev, n);
buf[n] = 0;
version[2] = strtol(buf, &endptr, 10);
if (*endptr != 0)
return false;
version[3] = FIRMWARE_REVISION_RELEASED;
if (pgm_read_byte(p ++) == '-') {
const char *q = p;
while (! is_whitespace_or_nl_or_eol(char(pgm_read_byte(q))))
++ q;
n = q - p;
if (n == strlen_P(STR_REVISION_DEV) && strncmp_PP(p, STR_REVISION_DEV, n) == 0)
version[3] = FIRMWARE_REVISION_DEV;
else if (n == strlen_P(STR_REVISION_ALPHA) && strncmp_PP(p, STR_REVISION_ALPHA, n) == 0)
version[3] = FIRMWARE_REVISION_ALPHA;
else if (n == strlen_P(STR_REVISION_BETA) && strncmp_PP(p, STR_REVISION_BETA, n) == 0)
version[3] = FIRMWARE_REVISION_BETA;
else if ((n == 2 || n == 3) && strncmp_PP(p, STR_REVISION_RC, 2) == 0) {
if (n == 2)
version[3] = FIRMWARE_REVISION_RC;
else {
p += 2;
if (is_digit(pgm_read_byte(p)))
version[3] = FIRMWARE_REVISION_RC + pgm_read_byte(p) - '1';
else
return false;
}
} else
return false;
}
#if 0
SERIAL_ECHOPGM("Version parsed, major: ");
SERIAL_ECHO(version[0]);
SERIAL_ECHOPGM(", minor: ");
SERIAL_ECHO(version[1]);
SERIAL_ECHOPGM(", revision: ");
SERIAL_ECHO(version[2]);
SERIAL_ECHOPGM(", flavor: ");
SERIAL_ECHO(version[3]);
SERIAL_ECHOLNPGM("");
#endif
return true;
}
// 1 - yes, 0 - false, -1 - error;
inline int8_t is_provided_version_newer(const char *version_string)
{
uint16_t ver_gcode[3], ver_current[3];
if (! parse_version(version_string, ver_gcode))
return -1;
if (! parse_version_P(FW_VERSION_STR, ver_current))
return 0; // this shall not happen
for (uint8_t i = 0; i < 3; ++ i)
if (ver_gcode[i] > ver_current[i])
return 1;
return 0;
}
bool show_upgrade_dialog_if_version_newer(const char *version_string)
{
uint16_t ver_gcode[4], ver_current[4];
if (! parse_version(version_string, ver_gcode)) {
// SERIAL_PROTOCOLLNPGM("parse_version failed");
return false;
}
if (! parse_version_P(FW_VERSION_STR, ver_current)) {
// SERIAL_PROTOCOLLNPGM("parse_version_P failed");
return false; // this shall not happen
}
// SERIAL_PROTOCOLLNPGM("versions parsed");
bool upgrade = false;
for (uint8_t i = 0; i < 4; ++ i) {
if (ver_gcode[i] > ver_current[i]) {
upgrade = true;
break;
} else if (ver_gcode[i] < ver_current[i])
break;
}
if (upgrade) {
lcd_display_message_fullscreen_P(MSG_NEW_FIRMWARE_AVAILABLE);
lcd_print_at_PGM(0, 2, PSTR(""));
for (const char *c = version_string; ! is_whitespace_or_nl_or_eol(*c); ++ c)
lcd_implementation_write(*c);
lcd_print_at_PGM(0, 3, MSG_NEW_FIRMWARE_PLEASE_UPGRADE);
tone(BEEPER, 1000);
delay_keep_alive(50);
noTone(BEEPER);
delay_keep_alive(500);
tone(BEEPER, 1000);
delay_keep_alive(50);
noTone(BEEPER);
lcd_wait_for_click();
lcd_update_enable(true);
lcd_implementation_clear();
lcd_update();
}
// Succeeded.
return true;
}
void update_current_firmware_version_to_eeprom()
{
for (int8_t i = 0; i < FW_PRUSA3D_MAGIC_LEN; ++ i)
eeprom_update_byte((uint8_t*)(EEPROM_FIRMWARE_PRUSA_MAGIC+i), pgm_read_byte(FW_PRUSA3D_MAGIC_STR+i));
uint16_t ver_current[4];
if (parse_version_P(FW_VERSION_STR, ver_current)) {
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_MAJOR, ver_current[0]);
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_MINOR, ver_current[1]);
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_REVISION, ver_current[2]);
// See FirmwareRevisionFlavorType for the definition of firmware flavors.
eeprom_update_word((uint16_t*)EEPROM_FIRMWARE_VERSION_FLAVOR, ver_current[3]);
}
}

70
Firmware/util.h
View File

@ -1,35 +1,35 @@
#ifndef UTIL_H
#define UTIL_H
extern const char* FW_VERSION_STR_P();
// Definition of a firmware flavor numerical values.
enum FirmwareRevisionFlavorType
{
FIRMWARE_REVISION_DEV = 0,
FIRMWARE_REVISION_ALPHA = 1,
FIRMWARE_REVISION_BETA = 2,
FIRMWARE_REVISION_RC,
FIRMWARE_REVISION_RC2,
FIRMWARE_REVISION_RC3,
FIRMWARE_REVISION_RC4,
FIRMWARE_REVISION_RC5,
FIRMWARE_REVISION_RELEASED = 127
};
extern bool show_upgrade_dialog_if_version_newer(const char *version_string);
extern void update_current_firmware_version_to_eeprom();
inline int8_t eeprom_read_int8(unsigned char* addr) {
uint8_t v = eeprom_read_byte(addr);
return *reinterpret_cast<int8_t*>(&v);
}
inline void eeprom_update_int8(unsigned char* addr, int8_t v) {
eeprom_update_byte(addr, *reinterpret_cast<uint8_t*>(&v));
}
#endif /* UTIL_H */
#ifndef UTIL_H
#define UTIL_H
extern const char* FW_VERSION_STR_P();
// Definition of a firmware flavor numerical values.
enum FirmwareRevisionFlavorType
{
FIRMWARE_REVISION_DEV = 0,
FIRMWARE_REVISION_ALPHA = 1,
FIRMWARE_REVISION_BETA = 2,
FIRMWARE_REVISION_RC,
FIRMWARE_REVISION_RC2,
FIRMWARE_REVISION_RC3,
FIRMWARE_REVISION_RC4,
FIRMWARE_REVISION_RC5,
FIRMWARE_REVISION_RELEASED = 127
};
extern bool show_upgrade_dialog_if_version_newer(const char *version_string);
extern void update_current_firmware_version_to_eeprom();
inline int8_t eeprom_read_int8(unsigned char* addr) {
uint8_t v = eeprom_read_byte(addr);
return *reinterpret_cast<int8_t*>(&v);
}
inline void eeprom_update_int8(unsigned char* addr, int8_t v) {
eeprom_update_byte(addr, *reinterpret_cast<uint8_t*>(&v));
}
#endif /* UTIL_H */