diff --git a/Firmware/Configuration.h b/Firmware/Configuration.h
index 239dc3f9b..f238116c7 100644
--- a/Firmware/Configuration.h
+++ b/Firmware/Configuration.h
@@ -5,6 +5,7 @@
 #include "Configuration_prusa.h"
 
 // Firmware version
+
 #define FW_version "3.0.10-12"
 
 #define FW_PRUSA3D_MAGIC "PRUSA3DFW"
diff --git a/Firmware/language_all.cpp b/Firmware/language_all.cpp
index 2ab648e0f..f0707651f 100644
--- a/Firmware/language_all.cpp
+++ b/Firmware/language_all.cpp
@@ -557,6 +557,7 @@ const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
 const char MSG_CALIBRATE_PINDA_IT[] PROGMEM = "Calibrare";
 const char MSG_CALIBRATE_PINDA_ES[] PROGMEM = "Calibrar";
 const char MSG_CALIBRATE_PINDA_PL[] PROGMEM = "Skalibrowac";
+
 const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "PINDA Temp. Kal.";
 const char MSG_CALIBRATE_PINDA_NL[] PROGMEM = "PINDA Temp. kal.";
 const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
@@ -1072,6 +1073,7 @@ const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_FIL_ADJUSTING_NL
 };
 
+
 const char MSG_FIL_LOADED_CHECK_EN[] PROGMEM = "Is filament loaded?";
 const char MSG_FIL_LOADED_CHECK_DE[] PROGMEM = "Ist Filament eingelegt?";
 const char MSG_FIL_LOADED_CHECK_NL[] PROGMEM = "Is filament ingestoken?";
@@ -1109,6 +1111,7 @@ const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] P
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
+
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_DE,
 	MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_NL
 };
diff --git a/Firmware/language_en.h b/Firmware/language_en.h
index e13db4e05..a5a1b3eaf 100644
--- a/Firmware/language_en.h
+++ b/Firmware/language_en.h
@@ -237,6 +237,7 @@
 #define(length=20, lines=4) MSG_FILAMENT_LOADING_T2							"Insert filament into extruder 3. Click when done."
 #define(length=20, lines=4) MSG_FILAMENT_LOADING_T3							"Insert filament into extruder 4. Click when done."
 #define(length=20, lines=1) MSG_CHANGE_EXTR									"Change extruder"
+
 #define(length=20, lines=2) MSG_FIL_LOADED_CHECK								"Is filament loaded?"
 #define(length=20, lines=3) MSG_FIL_TUNING										"Rotate the knob to adjust filament."
 #define(length=20, lines=4) MSG_FIL_ADJUSTING								"Adjusting filaments. Please wait."
@@ -278,6 +279,7 @@
 #define(length=20, lines=1) MSG_PID_BED_RUNNING					"PID bed cal. "
 
 
+
 #define(length=20, lines=1) MSG_CALIBRATE_PINDA					"PINDA Temp. cal."
 #define(length=20, lines=1) MSG_CALIBRATION_PINDA_MENU			"PINDA Temp. cal."
 #define(length=20, lines=4) MSG_PINDA_NOT_CALIBRATED			"PINDA temperature calibration has not been run yet"
@@ -286,4 +288,3 @@
 #define(length=20, lines=5) MSG_TEMP_CALIBRATION_DONE			"PINDA temperature calibration is finished. Click to continue."
 #define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON				"PINDA T.cal. [ON]"
 #define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF			"PINDA T.cal.[OFF]"
-
diff --git a/Firmware/ultralcd.h b/Firmware/ultralcd.h
index 1d09d7001..eb12faa0f 100644
--- a/Firmware/ultralcd.h
+++ b/Firmware/ultralcd.h
@@ -243,4 +243,5 @@ char reset_menu();
 void lcd_pinda_calibration_menu();
 void lcd_calibrate_pinda();
 void lcd_temp_calibration_set();
+
 #endif //ULTRALCD_H
\ No newline at end of file
diff --git a/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
index cc0626cca..0979e643b 100644
--- a/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
@@ -370,6 +370,7 @@ THERMISTORS SETTINGS
 #define Z_BABYSTEP_MIN -3999
 #define Z_BABYSTEP_MAX 0
 
+
 #define PINDA_PREHEAT_X 75
 #define PINDA_PREHEAT_Y -3
 #define PINDA_PREHEAT_Z 1