josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Document M155 command

This commit is contained in:
Alex Voinea 2020-09-23 09:14:35 +03:00
parent c0fced2f3c
commit d9fa44c142
No known key found for this signature in database
GPG Key ID: F5034E7CFCF2F973
1 changed files with 12 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Firmware/Marlin_main.cpp
View File

@ -3613,6 +3613,7 @@ extern uint8_t st_backlash_y;
//!@n M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) //!@n M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
//!@n M140 - Set bed target temp //!@n M140 - Set bed target temp
//!@n M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. //!@n M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
//!@n M155 - Automatically send temperatures
//!@n M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating //!@n M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
//! Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling //! Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
//!@n M200 D<millimeters>- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). //!@n M200 D<millimeters>- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
@ -6406,6 +6407,17 @@ Sigma_Exit:
} }
#ifdef AUTO_REPORT_TEMPERATURES #ifdef AUTO_REPORT_TEMPERATURES
/*!
### M155 - Automatically send temperatures <a href="https://reprap.org/wiki/G-code#M155:_Automatically_send_temperatures">M155: Automatically send temperatures</a>
#### Usage
M155 [ S ]
#### Parameters
- `S` - Set temperature autoreporting interval in seconds. 0 to disable. Maximum: 255
*/
case 155: case 155:
{ {
if (code_seen('S')) if (code_seen('S'))