diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index cea3786dc..34c3c95a9 100755
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -3624,7 +3624,7 @@ void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, ui
             msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
         else if (point_too_far_mask == 2 || point_too_far_mask == 7)
             // Only the center point or all the three front points.
-            msg = _i("XYZ calibration failed. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8
+            msg = _i("XYZ calibration failed. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
         else if ((point_too_far_mask & 1) == 0)
             // The right and maybe the center point out of reach.
             msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8
diff --git a/lang/lang_en.txt b/lang/lang_en.txt
index de1c026d6..a796bb9a0 100644
--- a/lang/lang_en.txt
+++ b/lang/lang_en.txt
@@ -967,7 +967,7 @@
 #
 "XYZ calibration failed. Bed calibration point was not found."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 
 #
diff --git a/lang/lang_en_cz.txt b/lang/lang_en_cz.txt
index 6e71f3624..fa46bf2e7 100644
--- a/lang/lang_en_cz.txt
+++ b/lang/lang_en_cz.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu."
 
diff --git a/lang/lang_en_de.txt b/lang/lang_en_de.txt
index 3c2b2526c..382fdf673 100644
--- a/lang/lang_en_de.txt
+++ b/lang/lang_en_de.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar."
 
diff --git a/lang/lang_en_es.txt b/lang/lang_en_es.txt
index 2e7fe691f..8387d0432 100644
--- a/lang/lang_en_es.txt
+++ b/lang/lang_en_es.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "Calibracion XYZ fallada. Puntos frontales no alcanzables."
 
diff --git a/lang/lang_en_fr.txt b/lang/lang_en_fr.txt
index 381b913b5..f0f1ef70e 100644
--- a/lang/lang_en_fr.txt
+++ b/lang/lang_en_fr.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "Echec calibration XYZ. Le point de calibration du plateau n'a pas ete trouve."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "Echec calibration XYZ. Les points de calibration en avant ne sont pas atteignables."
 
diff --git a/lang/lang_en_it.txt b/lang/lang_en_it.txt
index aaa924f50..de8a450b7 100644
--- a/lang/lang_en_it.txt
+++ b/lang/lang_en_it.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "Calibrazione XYZ fallita. Il punto di calibrazione sul piano non e' stato trovato."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
 
diff --git a/lang/lang_en_nl.txt b/lang/lang_en_nl.txt
index a16eec5fc..0a5ae7e10 100644
--- a/lang/lang_en_nl.txt
+++ b/lang/lang_en_nl.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "XYZ-kalibratie mislukt. Bed ijkpunt niet gevonden."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "XYZ-kalibratie mislukt. Voorste kalibratiepunten niet bereikbaar."
 
diff --git a/lang/lang_en_pl.txt b/lang/lang_en_pl.txt
index b942715d1..4498c6f73 100644
--- a/lang/lang_en_pl.txt
+++ b/lang/lang_en_pl.txt
@@ -1290,7 +1290,7 @@
 "XYZ calibration failed. Bed calibration point was not found."
 "Kalibracja XYZ nieudana. Nie znaleziono punktow kalibracyjnych."
 
-#
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
 "XYZ calibration failed. Front calibration points not reachable."
 "Kalibr. XYZ nieudana. Przednie punkty kalibr. nieosiagalne. Nalezy poprawic montaz drukarki."