diff --git a/Firmware/Configuration.h b/Firmware/Configuration.h
index 510052937..f706e0144 100644
--- a/Firmware/Configuration.h
+++ b/Firmware/Configuration.h
@@ -5,7 +5,7 @@
 #include "Configuration_prusa.h"
 
 // Firmware version
-#define FW_version "3.0.10-3"
+#define FW_version "3.0.10-4"
 
 #define FW_PRUSA3D_MAGIC "PRUSA3DFW"
 #define FW_PRUSA3D_MAGIC_LEN 10
diff --git a/Firmware/language_all.cpp b/Firmware/language_all.cpp
index 0acb54c90..2a082b31b 100644
--- a/Firmware/language_all.cpp
+++ b/Firmware/language_all.cpp
@@ -366,7 +366,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG
 	MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE
 };
 
-const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "XYZ callibration all right. Skew will be corrected automatically.";
+const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "XYZ calibration all right. Skew will be corrected automatically.";
 const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku.";
 const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_IT[] PROGMEM = "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata.";
 const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_ES[] PROGMEM = "Calibracion XYZ correcta. La inclinacion se corregira automaticamente.";
diff --git a/Firmware/language_en.h b/Firmware/language_en.h
index 8dd7506aa..01187b868 100644
--- a/Firmware/language_en.h
+++ b/Firmware/language_en.h
@@ -213,7 +213,7 @@
 #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED				"XYZ calibration failed. Please consult the manual."
 #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT					"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD					"XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
-#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME				"XYZ callibration all right. Skew will be corrected automatically."
+#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME				"XYZ calibration all right. Skew will be corrected automatically."
 #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR		"XYZ calibration failed. Left front calibration point not reachable."
 #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR		"XYZ calibration failed. Right front calibration point not reachable."
 #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR		"XYZ calibration failed. Front calibration points not reachable."
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index 9e2f84166..590883b8c 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -1992,6 +1992,9 @@ void prusa_statistics(int _message) {
     case 99:		// heartbeat
         SERIAL_ECHO("{[PRN:99]");
         prusa_stat_temperatures();
+		SERIAL_ECHO("[PFN:");
+		SERIAL_ECHO(farm_no);
+		SERIAL_ECHO("]");
         SERIAL_ECHOLN("}");
             
         break;
@@ -2681,9 +2684,18 @@ char reset_menu() {
 }
 
 static void lcd_disable_farm_mode() {
-	farm_mode = 0;
-	eeprom_update_byte((unsigned char *)EEPROM_FARM_MODE, farm_mode);
-	lcd_return_to_status();	
+	int8_t disable = lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Disable farm mode?"), true, false); //allow timeouting, default no
+	if (disable) {
+		farm_mode = 0;
+		eeprom_update_byte((unsigned char *)EEPROM_FARM_MODE, farm_mode);
+		lcd_return_to_status();
+	}
+	else {
+		lcd_goto_menu(lcd_settings_menu);
+	}
+	lcd_update_enable(true);
+	lcdDrawUpdate = 2;
+	
 }