josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

dont show message that default settings are used if user has never run M500

This commit is contained in:
PavelSindler 2017-07-19 20:59:38 +02:00
parent f2d34d4cd9
commit df342c646d
4 changed files with 21 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
Firmware/ConfigurationStore.cpp
View File

@ -273,13 +273,12 @@ void Config_PrintSettings()
bool Config_RetrieveSettings()
{
int i=EEPROM_OFFSET;
bool settings_from_eeprom;
bool previous_settings_retrieved = true;
char stored_ver[4];
char ver[4]=EEPROM_VERSION;
EEPROM_READ_VAR(i,stored_ver); //read stored version
SERIAL_ECHOLNPGM("Stored EEPROM version:");
MYSERIAL.println(stored_ver);
// SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]");
// SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]");
if (strncmp(ver,stored_ver,3) == 0)
{
// version number match
@ -362,17 +361,23 @@ bool Config_RetrieveSettings()
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Stored settings retrieved");
settings_from_eeprom = true;
}
else
{
Config_ResetDefault();
settings_from_eeprom = false;
//Return false to inform user that eeprom version was changed and firmware is using default hardcoded settings now.
//In case that storing to eeprom was not used yet, do not inform user that hardcoded settings are used.
if (eeprom_read_byte((uint8_t *)EEPROM_OFFSET) != 0xFF ||
eeprom_read_byte((uint8_t *)EEPROM_OFFSET + 1) != 0xFF ||
eeprom_read_byte((uint8_t *)EEPROM_OFFSET + 2) != 0xFF) {
previous_settings_retrieved = false;
}
}
#ifdef EEPROM_CHITCHAT
Config_PrintSettings();
#endif
return settings_from_eeprom;
return previous_settings_retrieved;
}
#endif

15
Firmware/Marlin_main.cpp
View File

@ -1045,7 +1045,7 @@ void setup()
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
lcd_update_enable(false);
// loads data from EEPROM if available else uses defaults (and resets step acceleration rate)
settings_from_eeprom = Config_RetrieveSettings();
bool previous_settings_retrieved = Config_RetrieveSettings();
SdFatUtil::set_stack_guard(); //writes magic number at the end of static variables to protect against overwriting static memory by stack
tp_init(); // Initialize temperature loop
plan_init(); // Initialize planner;
@ -1209,11 +1209,14 @@ void setup()
lcd_show_fullscreen_message_and_wait_P(MSG_FOLLOW_CALIBRATION_FLOW);
}
for (int i = 0; i<4; i++) EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
//If eeprom version for storing parameters to eeprom using M500 changed, default settings are used. Inform user in this case
if (!previous_settings_retrieved) {
lcd_show_fullscreen_message_and_wait_P(MSG_DEFAULT_SETTINGS_LOADED);
}
lcd_update_enable(true);
//If eeprom version for storing parameters to eeprom using M500 changed, default settings are used. Inform user in this case.
if(!setting_from_eeprom) lcd_show_fullscreen_message_and_wait_P(MSG_DEFAULT_SETTINGS_LOADED);
// Store the currently running firmware into an eeprom,
// so the next time the firmware gets updated, it will know from which version it has been updated.
update_current_firmware_version_to_eeprom();
@ -4953,10 +4956,6 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
}
break;
#endif
case 500: // M500 Store settings in EEPROM
{

2
Firmware/language_all.cpp
View File

@ -775,7 +775,7 @@ const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_DATE_DE
};
const char MSG_DEFAULT_SETTINGS_LOADED_EN[] PROGMEM = "Hardcoded default settings loaded";
const char MSG_DEFAULT_SETTINGS_LOADED_EN[] PROGMEM = "Default settings loaded";
const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[1] PROGMEM = {
MSG_DEFAULT_SETTINGS_LOADED_EN
};

2
Firmware/language_en.h
View File

@ -311,4 +311,4 @@
#define(length=15, lines=1) MSG_MEASURED_SKEW "Measured skew:"
#define(length=15, lines=1) MSG_SLIGHT_SKEW "Slight skew:"
#define(length=15, lines=1) MSG_SEVERE_SKEW "Severe skew:"
#define(length=20, lines=4) MSG_DEFAULT_SETTINGS_LOADED "Hardcoded default settings loaded"
#define(length=20, lines=4) MSG_DEFAULT_SETTINGS_LOADED "Default settings loaded"