diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index 249147482..557ca34ad 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -7090,8 +7090,14 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
               }
 			  else
 			  {
+#if defined(MMU_HAS_CUTTER) && defined(MMU_ALWAYS_CUT)
+			      if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+                  {
+                      mmu_command(MmuCmd::K0 + tmp_extruder);
+                      manage_response(true, true, MMU_UNLOAD_MOVE);
+                  }
+#endif //defined(MMU_HAS_CUTTER) && defined(MMU_ALWAYS_CUT)
 				  mmu_command(MmuCmd::T0 + tmp_extruder);
-
 				  manage_response(true, true, MMU_TCODE_MOVE);
 		          mmu_continue_loading(is_usb_printing);
 
diff --git a/Firmware/eeprom.h b/Firmware/eeprom.h
index c96e1d8db..899d52359 100644
--- a/Firmware/eeprom.h
+++ b/Firmware/eeprom.h
@@ -201,5 +201,11 @@
 static M500_conf * const EEPROM_M500_base = reinterpret_cast<M500_conf*>(20); //offset for storing settings using M500
 #endif
 
+enum
+{
+    EEPROM_MMU_CUTTER_ENABLED_enabled = 1,
+    EEPROM_MMU_CUTTER_ENABLED_always = 2,
+};
+
 
 #endif // EEPROM_H
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index bfbfd1f99..3b2be088a 100755
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -2346,13 +2346,22 @@ void lcd_set_fan_check() {
 #ifdef MMU_HAS_CUTTER
 void lcd_cutter_enabled()
 {
-    if (1 == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+    if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+    {
+#ifndef MMU_ALWAYS_CUT
+        eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
+    }
+#else //MMU_ALWAYS_CUT
+        eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_always);
+    }
+    else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
     {
         eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
     }
+#endif //MMU_ALWAYS_CUT
     else
     {
-        eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 1);
+        eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_enabled);
     }
 }
 #endif //MMU_HAS_CUTTER
@@ -5287,10 +5296,16 @@ static bool settingsCutter()
 {
     if (mmu_enabled)
     {
-        if (1 == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+        if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
         {
             if (menu_item_function_P(_i("Cutter       [on]"), lcd_cutter_enabled)) return true;//// c=17 r=1
         }
+#ifdef MMU_ALWAYS_CUT
+        else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+        {
+            if (menu_item_function_P(_i("Cutter   [always]"), lcd_cutter_enabled)) return true;//// c=17 r=1
+        }
+#endif
         else
         {
             if (menu_item_function_P(_i("Cutter      [off]"), lcd_cutter_enabled)) return true;//// c=17 r=1
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
index a0f53fad2..c6fa56e95 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
@@ -505,6 +505,13 @@
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
 //#define MMU_HAS_CUTTER
 
+// This is experimental feature requested by our test department.
+// There is no known use for ordinary user. If enabled by this macro
+// and enabled from printer menu (not enabled by default). It cuts filament
+// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
+// defined.
+
+//#define MMU_ALWAYS_CUT
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
index 5946bc801..24f624cd6 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
@@ -506,6 +506,13 @@
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
 //#define MMU_HAS_CUTTER
 
+// This is experimental feature requested by our test department.
+// There is no known use for ordinary user. If enabled by this macro
+// and enabled from printer menu (not enabled by default). It cuts filament
+// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
+// defined.
+
+//#define MMU_ALWAYS_CUT
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
index 2cf180a18..81c8788ca 100644
--- a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
@@ -627,6 +627,14 @@
 #define MMU_HWRESET
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
 //#define MMU_HAS_CUTTER
+
+// This is experimental feature requested by our test department.
+// There is no known use for ordinary user. If enabled by this macro
+// and enabled from printer menu (not enabled by default). It cuts filament
+// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
+// defined.
+
+//#define MMU_ALWAYS_CUT
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
 #endif //__CONFIGURATION_PRUSA_H