diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index a7240bf5c..70b77f680 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -3229,7 +3229,8 @@ void process_commands()
 #ifdef PINDA_THERMISTOR
 		if (true)
 		{
-			if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) {
+			if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]))
+			{
 				// We don't know where we are! HOME!
 				// Push the commands to the front of the message queue in the reverse order!
 				// There shall be always enough space reserved for these commands.
@@ -3239,7 +3240,14 @@ void process_commands()
 			}
 			lcd_show_fullscreen_message_and_wait_P(MSG_TEMP_CAL_WARNING);
 			bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_STEEL_SHEET_CHECK, false, false);
-			if (result) lcd_show_fullscreen_message_and_wait_P(MSG_REMOVE_STEEL_SHEET);
+			if (result)
+			{
+				current_position[Z_AXIS] = 50;
+				current_position[Y_AXIS] = 190;
+				plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
+				st_synchronize();
+				lcd_show_fullscreen_message_and_wait_P(MSG_REMOVE_STEEL_SHEET);
+			}
 			lcd_update_enable(true);
 			KEEPALIVE_STATE(NOT_BUSY); //no need to print busy messages as we print current temperatures periodicaly
 			SERIAL_ECHOLNPGM("PINDA probe calibration start");
diff --git a/Firmware/mesh_bed_calibration.cpp b/Firmware/mesh_bed_calibration.cpp
index 8db94cd42..322acbef1 100644
--- a/Firmware/mesh_bed_calibration.cpp
+++ b/Firmware/mesh_bed_calibration.cpp
@@ -20,7 +20,7 @@ float   world2machine_shift[2];
 #define WEIGHT_FIRST_ROW_Y_LOW  (0.0f)
 
 #define BED_ZERO_REF_X (- 22.f + X_PROBE_OFFSET_FROM_EXTRUDER) // -22 + 23 = 1
-#define BED_ZERO_REF_Y (- 0.6f + Y_PROBE_OFFSET_FROM_EXTRUDER) // -0.6 + 5 = 4.4
+#define BED_ZERO_REF_Y (- 0.6f + Y_PROBE_OFFSET_FROM_EXTRUDER + 4) // -0.6 + 5 = 4.4
 
 // Scaling of the real machine axes against the programmed dimensions in the firmware.
 // The correction is tiny, here around 0.5mm on 250mm length.
@@ -56,10 +56,10 @@ const float bed_skew_angle_extreme = (0.25f * M_PI / 180.f);
 // Positions of the bed reference points in the machine coordinates, referenced to the P.I.N.D.A sensor.
 // The points are the following: center front, center right, center rear, center left.
 const float bed_ref_points_4[] PROGMEM = {
-	13.f - BED_ZERO_REF_X,   10.4f - 4.f - BED_ZERO_REF_Y,
-	221.f - BED_ZERO_REF_X,  10.4f - 4.f - BED_ZERO_REF_Y,
-	221.f - BED_ZERO_REF_X, 202.4f - 4.f - BED_ZERO_REF_Y,
-	13.f - BED_ZERO_REF_X, 202.4f - 4.f - BED_ZERO_REF_Y
+	13.f - BED_ZERO_REF_X,   10.4f - BED_ZERO_REF_Y,
+	221.f - BED_ZERO_REF_X,  10.4f - BED_ZERO_REF_Y,
+	221.f - BED_ZERO_REF_X, 202.4f - BED_ZERO_REF_Y,
+	13.f - BED_ZERO_REF_X, 202.4f - BED_ZERO_REF_Y
 };
 
 const float bed_ref_points[] PROGMEM = {