josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rename `Extruder fan` to `Hotend fan`

This commit is contained in:
3d-gussner 2022-10-17 13:49:18 +02:00
parent e8bb19b3ea
commit f2fe9a51ee
26 changed files with 120 additions and 120 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Marlin_main.cpp
View File

@ -1247,7 +1247,7 @@ void setup()
temp_mgr_init();
#ifdef EXTRUDER_ALTFAN_DETECT
SERIAL_ECHORPGM(_n("Extruder fan type: "));
SERIAL_ECHORPGM(_n("Hotend fan type: "));
if (extruder_altfan_detect())
SERIAL_ECHOLNRPGM(PSTR("ALTFAN"));
else

10
Firmware/fancheck.cpp
View File

@ -37,7 +37,7 @@ volatile uint8_t fan_check_error = EFCE_OK;
void setExtruderAutoFanState(uint8_t state)
{
//If bit 1 is set (0x02), then the extruder fan speed won't be adjusted according to temperature. Useful for forcing
//If bit 1 is set (0x02), then the hotend fan speed won't be adjusted according to temperature. Useful for forcing
//the fan to either On or Off during certain tests/errors.
fanState = state;
@ -62,7 +62,7 @@ void countFanSpeed()
fan_speed[0] = (fan_edge_counter[0] * (float(250) / (_millis() - extruder_autofan_last_check)));
fan_speed[1] = (fan_edge_counter[1] * (float(250) / (_millis() - extruder_autofan_last_check)));
/*SERIAL_ECHOPGM("time interval: "); MYSERIAL.println(_millis() - extruder_autofan_last_check);
SERIAL_ECHOPGM("extruder fan speed:"); MYSERIAL.print(fan_speed[0]); SERIAL_ECHOPGM("; edge counter:"); MYSERIAL.println(fan_edge_counter[0]);
SERIAL_ECHOPGM("hotend fan speed:"); MYSERIAL.print(fan_speed[0]); SERIAL_ECHOPGM("; edge counter:"); MYSERIAL.println(fan_edge_counter[0]);
SERIAL_ECHOPGM("print fan speed:"); MYSERIAL.print(fan_speed[1]); SERIAL_ECHOPGM("; edge counter:"); MYSERIAL.println(fan_edge_counter[1]);
SERIAL_ECHOLNPGM(" ");*/
fan_edge_counter[0] = 0;
@ -101,7 +101,7 @@ void fanSpeedError(unsigned char _fan) {
}
switch (_fan) {
case 0: // extracting the same code from case 0 and case 1 into a function saves 72B
fanSpeedErrorBeep(PSTR("Extruder fan speed is lower than expected"), MSG_FANCHECK_EXTRUDER);
fanSpeedErrorBeep(PSTR("Hotend fan speed is lower than expected"), MSG_FANCHECK_HOTEND);
break;
case 1:
fanSpeedErrorBeep(PSTR("Print fan speed is lower than expected"), MSG_FANCHECK_PRINT);
@ -114,10 +114,10 @@ void checkFanSpeed()
uint8_t max_fan_errors[2];
#ifdef FAN_SOFT_PWM
max_fan_errors[1] = 3; // 15 seconds (Print fan)
max_fan_errors[0] = 2; // 10 seconds (Extruder fan)
max_fan_errors[0] = 2; // 10 seconds (Hotend fan)
#else //FAN_SOFT_PWM
max_fan_errors[1] = 15; // 15 seconds (Print fan)
max_fan_errors[0] = 5; // 5 seconds (Extruder fan)
max_fan_errors[0] = 5; // 5 seconds (Hotend fan)
#endif //FAN_SOFT_PWM
if(fans_check_enabled)

10
Firmware/messages.cpp
View File

@ -32,8 +32,8 @@ const char MSG_FANS_CHECK[] PROGMEM_I1 = ISTR("Fans check"); ////MSG_FANS_CHECK
const char MSG_FIL_RUNOUTS[] PROGMEM_I1 = ISTR("Fil. runouts"); ////MSG_FIL_RUNOUTS c=15
const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////MSG_FILAMENT c=17
const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////MSG_FAN_SPEED c=14
const char MSG_EXTRUDER_FAN_SPEED[] PROGMEM_I1 = ISTR("Extruder fan:");////MSG_EXTRUDER_FAN_SPEED c=16
const char MSG_PRINT_FAN_SPEED[] PROGMEM_I1 = ISTR("Print fan:"); ////MSG_PRINT_FAN_SPEED c=16
const char MSG_HOTEND_FAN_SPEED[] PROGMEM_I1 = ISTR("Hotend fan:");////MSG_HOTEND_FAN_SPEED c=15
const char MSG_PRINT_FAN_SPEED[] PROGMEM_I1 = ISTR("Print fan:"); ////MSG_PRINT_FAN_SPEED c=15
const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////MSG_FILAMENT_CLEAN c=20 r=2
const char MSG_FILAMENT_LOADED[] PROGMEM_I1 = ISTR("Is filament loaded?"); ////MSG_FILAMENT_LOADED c=20 r=2
const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////MSG_FILAMENTCHANGE c=18
@ -85,7 +85,7 @@ const char MSG_RESET[] PROGMEM_I1 = ISTR("Reset"); ////MSG_RESET c=14
const char MSG_RESUME_PRINT[] PROGMEM_I1 = ISTR("Resume print"); ////MSG_RESUME_PRINT c=18
const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////MSG_RESUMING_PRINT c=20
const char MSG_SELFTEST_PART_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////MSG_SELFTEST_PART_FAN c=20
const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////MSG_SELFTEST_EXTRUDER_FAN c=20
const char MSG_SELFTEST_HOTEND_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////MSG_SELFTEST_HOTEND_FAN c=20
const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed"); ////MSG_SELFTEST_FAILED c=20
const char MSG_SELFTEST_FAN[] PROGMEM_I1 = ISTR("Fan test"); ////MSG_SELFTEST_FAN c=20
const char MSG_SELFTEST_FAN_NO[] PROGMEM_I1 = ISTR("Not spinning"); ////MSG_SELFTEST_FAN_NO c=19
@ -209,8 +209,8 @@ const char MSG_OCTOPRINT_PAUSED[] PROGMEM_N1 = "// action:paused"; ////
const char MSG_OCTOPRINT_ASK_RESUME[] PROGMEM_N1 = "// action:resume"; ////
const char MSG_OCTOPRINT_RESUMED[] PROGMEM_N1 = "// action:resumed"; ////
const char MSG_OCTOPRINT_CANCEL[] PROGMEM_N1 = "// action:cancel"; ////
const char MSG_FANCHECK_EXTRUDER[] PROGMEM_N1 = "Err: EXTR. FAN ERROR"; ////c=20
const char MSG_FANCHECK_PRINT[] PROGMEM_N1 = "Err: PRINT FAN ERROR"; ////c=20
const char MSG_FANCHECK_HOTEND[] PROGMEM_N1 = "Err:HOTEND FAN ERROR"; ////c=20
const char MSG_FANCHECK_PRINT[] PROGMEM_N1 = "Err:PRINT FAN ERROR"; ////c=20
const char MSG_M112_KILL[] PROGMEM_N1 = "M112 called. Emergency Stop."; ////c=20
const char MSG_ADVANCE_K[] PROGMEM_N1 = "Advance K:"; ////c=13
const char MSG_POWERPANIC_DETECTED[] PROGMEM_N1 = "POWER PANIC DETECTED"; ////c=20

6
Firmware/messages.h
View File

@ -38,7 +38,7 @@ extern const char MSG_FANS_CHECK[];
extern const char MSG_FIL_RUNOUTS[];
extern const char MSG_FILAMENT[];
extern const char MSG_FAN_SPEED[];
extern const char MSG_EXTRUDER_FAN_SPEED[];
extern const char MSG_HOTEND_FAN_SPEED[];
extern const char MSG_PRINT_FAN_SPEED[];
extern const char MSG_FILAMENT_CLEAN[];
extern const char MSG_FILAMENT_LOADED[];
@ -90,7 +90,7 @@ extern const char MSG_RESET[];
extern const char MSG_RESUME_PRINT[];
extern const char MSG_RESUMING_PRINT[];
extern const char MSG_SELFTEST_PART_FAN[];
extern const char MSG_SELFTEST_EXTRUDER_FAN[];
extern const char MSG_SELFTEST_HOTEND_FAN[];
extern const char MSG_SELFTEST_FAILED[];
extern const char MSG_SELFTEST_FAN[];
extern const char MSG_SELFTEST_FAN_NO[];
@ -215,7 +215,7 @@ extern const char MSG_OCTOPRINT_PAUSED[];
extern const char MSG_OCTOPRINT_ASK_RESUME[];
extern const char MSG_OCTOPRINT_RESUMED[];
extern const char MSG_OCTOPRINT_CANCEL[];
extern const char MSG_FANCHECK_EXTRUDER[];
extern const char MSG_FANCHECK_HOTEND[];
extern const char MSG_FANCHECK_PRINT[];
extern const char MSG_M112_KILL[];
extern const char MSG_ADVANCE_K[];

2
Firmware/pins_Rambo_1_0.h
View File

@ -78,7 +78,7 @@
#define PS_ON_PIN -1
#define KILL_PIN -1 // 80 with Smart Controller LCD
#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
#define TACH_0 30 // noctua extruder fan
#define TACH_0 30 // noctua hotend fan
//#define KILL_PIN 32

2
Firmware/pins_Rambo_1_3.h
View File

@ -81,7 +81,7 @@
#define PS_ON_PIN -1
#define KILL_PIN -1 // 80 with Smart Controller LCD
#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
#define TACH_0 30 // noctua extruder fan
#define TACH_0 30 // noctua hotend fan
//#define KILL_PIN 32

2
Firmware/temperature.cpp
View File

@ -884,7 +884,7 @@ void soft_pwm_init()
OCR2B = 128;
ENABLE_SOFT_PWM_INTERRUPT();
timer4_init(); //for tone and Extruder fan PWM
timer4_init(); //for tone and Hotend fan PWM
}
#if (defined (TEMP_RUNAWAY_BED_HYSTERESIS) && TEMP_RUNAWAY_BED_TIMEOUT > 0) || (defined (TEMP_RUNAWAY_EXTRUDER_HYSTERESIS) && TEMP_RUNAWAY_EXTRUDER_TIMEOUT > 0)

34
Firmware/ultralcd.cpp
View File

@ -203,7 +203,7 @@ enum class FanCheck : uint_least8_t {
/**
* Try to check fan working and wiring.
*
* @param _fan i fan number 0 means extruder fan, 1 means print fan.
* @param _fan i fan number 0 means hotend fan, 1 means print fan.
*
* @returns a TestError noerror, extruderFan, printFan or swappedFan.
*/
@ -1104,8 +1104,8 @@ static void pgmtext_with_colon(const char *ipgmLabel, char *dst, uint8_t dstSize
//!
//! @code{.unparsed}
//! |01234567890123456789|
//! |Extruder fan: 0000| MSG_EXTRUDER_FAN_SPEED c=16
//! |Print fan: 0000| MSG_PRINT_FAN_SPEED c=16
//! |Hotend fan: 0000| MSG_HOTEND_FAN_SPEED c=15
//! |Print fan: 0000| MSG_PRINT_FAN_SPEED c=15
//! | |
//! | |
//! ----------------------
@ -1115,7 +1115,7 @@ void lcd_menu_extruder_info() // NOT static due to using ins
lcd_timeoutToStatus.stop(); //infinite timeout
lcd_home();
lcd_printf_P(PSTR("%-16.16S%-4d\n" "%-16.16S%-4d\n"), _T(MSG_EXTRUDER_FAN_SPEED), 60*fan_speed[0], _T(MSG_PRINT_FAN_SPEED), 60*fan_speed[1] );
lcd_printf_P(PSTR("%-16.16S%-4d\n" "%-16.16S%-4d\n"), _T(MSG_HOTEND_FAN_SPEED), 60*fan_speed[0], _T(MSG_PRINT_FAN_SPEED), 60*fan_speed[1] );
menu_back_if_clicked();
}
@ -5235,22 +5235,22 @@ static bool fan_error_selftest()
fanSpeedSoftPwm = 255;
#endif //FAN_SOFT_PWM
manage_heater(); //enables print fan
setExtruderAutoFanState(3); //force enables the extruder fan
setExtruderAutoFanState(3); //force enables the hotend fan
#ifdef FAN_SOFT_PWM
extruder_autofan_last_check = _millis();
fan_measuring = true;
#endif //FAN_SOFT_PWM
_delay(1000); //delay_keep_alive would turn off extruder fan, because temerature is too low (maybe)
_delay(1000); //delay_keep_alive would turn off hotend fan, because temerature is too low (maybe)
manage_heater();
fanSpeed = 0;
setExtruderAutoFanState(1); //releases lock on the extruder fan
setExtruderAutoFanState(1); //releases lock on the hotend fan
#ifdef FAN_SOFT_PWM
fanSpeedSoftPwm = 0;
#endif //FAN_SOFT_PWM
manage_heater();
#ifdef TACH_0
if (fan_speed[0] <= 20) { //extruder fan error
LCD_ALERTMESSAGERPGM(MSG_FANCHECK_EXTRUDER);
if (fan_speed[0] <= 20) { //hotend fan error
LCD_ALERTMESSAGERPGM(MSG_FANCHECK_HOTEND);
return 1;
}
#endif
@ -6272,7 +6272,7 @@ bool lcd_selftest()
_progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000);
#if (defined(FANCHECK) && defined(TACH_0))
switch (lcd_selftest_fan_auto(0)){ // check extruder Fan
switch (lcd_selftest_fan_auto(0)){ // check hotend fan
case FanCheck::SwappedFan:
_swapped_fan = true; // swapped is merely a hint (checked later)
// FALLTHRU
@ -6316,7 +6316,7 @@ bool lcd_selftest()
}
if (_swapped_fan) {
//turn on print fan and check that left extruder fan is not spinning
//turn on print fan and check that left hotend fan is not spinning
_result = lcd_selftest_manual_fan_check(1, true);
if (_result) {
//print fan is stil turned on; check that it is spinning
@ -6968,7 +6968,7 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
lcd_print(_error_1);
break;
case TestError::ExtruderFan:
lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_EXTRUDER_FAN));
lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_HOTEND_FAN));
lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
lcd_set_cursor(18, 3);
lcd_print(_error_1);
@ -7114,12 +7114,12 @@ static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
{
case 0:
// extruder cooling fan
lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_PART_FAN) : _T(MSG_SELFTEST_EXTRUDER_FAN));
lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_PART_FAN) : _T(MSG_SELFTEST_HOTEND_FAN));
setExtruderAutoFanState(3);
break;
case 1:
// object cooling fan
lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_EXTRUDER_FAN) : _T(MSG_SELFTEST_PART_FAN));
lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_HOTEND_FAN) : _T(MSG_SELFTEST_PART_FAN));
SET_OUTPUT(FAN_PIN);
#ifdef FAN_SOFT_PWM
fanSpeedSoftPwm = 255;
@ -7226,10 +7226,10 @@ static FanCheck lcd_selftest_fan_auto(uint8_t _fan)
switch (_fan) {
case 0:
setExtruderAutoFanState(3); // extruder fan
setExtruderAutoFanState(3); // hotend fan
lcd_selftest_setfan(0); // print fan off
lcd_selftest_measure_fans(2, 18, 2);
setExtruderAutoFanState(0); // extruder fan off
setExtruderAutoFanState(0); // hotend fan off
if (fan_speed[0] < failThr) {
return FanCheck::ExtruderFan;
}
@ -7286,7 +7286,7 @@ static uint8_t lcd_selftest_screen(TestScreen screen, uint8_t _progress, uint8_t
if ((screen >= TestScreen::ExtruderFan) && (screen <= TestScreen::FansOk))
{
//SERIAL_ECHOLNPGM("Fan test");
lcd_puts_at_P(0, 2, _T(MSG_EXTRUDER_FAN_SPEED));
lcd_puts_at_P(0, 2, _T(MSG_HOTEND_FAN_SPEED));
lcd_set_cursor(18, 2);
(screen < TestScreen::PrintFan) ? lcd_print(_indicator) : lcd_print("OK");
lcd_puts_at_P(0, 3, _T(MSG_PRINT_FAN_SPEED));

8
lang/po/Firmware.pot
View File

@ -515,10 +515,10 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgid "Hotend fan:"
msgstr ""
#. MSG_INFO_EXTRUDER c=18
@ -966,7 +966,7 @@ msgstr ""
msgid "Left"
msgstr ""
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1581,7 +1581,7 @@ msgstr ""
msgid "Print aborted"
msgstr ""
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_cs.po
View File

@ -536,11 +536,11 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Levy vent.:"
msgid "Hotend fan:"
msgstr "Vent. hotendu:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1000,7 +1000,7 @@ msgstr "Selhani posl. tisku"
msgid "Left"
msgstr "Vlevo"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1625,7 +1625,7 @@ msgstr "Pro nahrati trysky a pokracovani stisknete tlacitko."
msgid "Print aborted"
msgstr "Tisk prerusen"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

8
lang/po/Firmware_da.po
View File

@ -523,10 +523,10 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgid "Hotend fan:"
msgstr ""
#. MSG_INFO_EXTRUDER c=18
@ -975,7 +975,7 @@ msgstr ""
msgid "Left"
msgstr ""
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1590,7 +1590,7 @@ msgstr ""
msgid "Print aborted"
msgstr ""
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_de.po
View File

@ -540,11 +540,11 @@ msgstr "Spannrol. einkuppeln"
msgid "Extruder"
msgstr "Extruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Extruderlüfter:"
msgid "Hotend fan:"
msgstr "Hotend-Lüfter:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1024,7 +1024,7 @@ msgstr "Letzte Druckfehler"
msgid "Left"
msgstr "Links"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1659,7 +1659,7 @@ msgstr "Bitte drücken Sie den Knopf um die Düse vorzuheizen und fortzufahren."
msgid "Print aborted"
msgstr "Druck abgebrochen"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_es.po
View File

@ -536,11 +536,11 @@ msgstr ""
msgid "Extruder"
msgstr "Extruir"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Vent.extrusor:"
msgid "Hotend fan:"
msgstr "Vent. d. fusor:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1002,7 +1002,7 @@ msgstr "Ultimos imp. fallos"
msgid "Left"
msgstr "Izquierda"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1635,7 +1635,7 @@ msgstr "Pulsa el dial para precalentar la boquilla y continue."
msgid "Print aborted"
msgstr "Impresion cancelada"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_fr.po
View File

@ -539,11 +539,11 @@ msgstr ""
msgid "Extruder"
msgstr "Extrudeur"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Vent. extrudeur:"
msgid "Hotend fan:"
msgstr "Vent. hotend:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1009,7 +1009,7 @@ msgstr "Echecs derniere imp."
msgid "Left"
msgstr "Gauche"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1637,7 +1637,7 @@ msgstr "Appuyez sur le bouton pour prechauffer la buse et continuer."
msgid "Print aborted"
msgstr "Impression annulee"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_hr.po
View File

@ -534,11 +534,11 @@ msgstr ""
msgid "Extruder"
msgstr "Ekstruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Ekstruder vent:"
msgid "Hotend fan:"
msgstr "Hotend vent:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1000,7 +1000,7 @@ msgstr "Zadnji neusp. print"
msgid "Left"
msgstr "Lijevo"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1624,7 +1624,7 @@ msgstr "Pritisnite gumb za predgrijavanje mlaznice i nastavite."
msgid "Print aborted"
msgstr "Print je prekinut"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_hu.po
View File

@ -537,11 +537,11 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Extruder vent.:"
msgid "Hotend fan:"
msgstr "Hotend vent.:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1004,7 +1004,7 @@ msgstr "Utolso nyomt. hibak"
msgid "Left"
msgstr "Bal"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1631,7 +1631,7 @@ msgstr "Nyomd meg a gombot a folytatashoz es a fuvoka felfutesehez."
msgid "Print aborted"
msgstr "Nyomt. megszakitva"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_it.po
View File

@ -537,11 +537,11 @@ msgstr ""
msgid "Extruder"
msgstr "Estrusore"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1131
#: ../../Firmware/ultralcd.cpp:7302
msgid "Extruder fan:"
msgstr "Vent. estrusore:"
msgid "Hotend fan:"
msgstr "Ventola hotend:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1709
@ -1003,7 +1003,7 @@ msgstr "Errori ultima stampa"
msgid "Left"
msgstr "Sinistra"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6984
#: ../../Firmware/ultralcd.cpp:7130 ../../Firmware/ultralcd.cpp:7135
msgid "Left hotend fan?"
@ -1636,7 +1636,7 @@ msgstr "Premete la manopola per preriscaldare l'ugello e continuare."
msgid "Print aborted"
msgstr "Stampa interrotta"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1131
#: ../../Firmware/ultralcd.cpp:7305
msgid "Print fan:"

8
lang/po/Firmware_lb.po
View File

@ -523,10 +523,10 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgid "Hotend fan:"
msgstr ""
#. MSG_INFO_EXTRUDER c=18
@ -975,7 +975,7 @@ msgstr ""
msgid "Left"
msgstr ""
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1590,7 +1590,7 @@ msgstr ""
msgid "Print aborted"
msgstr ""
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

8
lang/po/Firmware_lt.po
View File

@ -523,10 +523,10 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgid "Hotend fan:"
msgstr ""
#. MSG_INFO_EXTRUDER c=18
@ -975,7 +975,7 @@ msgstr ""
msgid "Left"
msgstr ""
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1590,7 +1590,7 @@ msgstr ""
msgid "Print aborted"
msgstr ""
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_nl.po
View File

@ -540,11 +540,11 @@ msgstr "Koppel spanrol"
msgid "Extruder"
msgstr "Extruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Extruder fan:"
msgid "Hotend fan:"
msgstr "Hotend fan:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1018,7 +1018,7 @@ msgstr "Laatste printfouten"
msgid "Left"
msgstr "Links"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1649,7 +1649,7 @@ msgstr "Druk op de knop om de tuit voor te verwarmen en door te gaan."
msgid "Print aborted"
msgstr "Print afgebroken"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

12
lang/po/Firmware_no.po
View File

@ -537,11 +537,11 @@ msgstr ""
msgid "Extruder"
msgstr "Ekstruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Ekstrudervifte:"
msgid "Hotend fan:"
msgstr "Hotend-vifte:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -997,11 +997,11 @@ msgstr "Siste printfeil"
msgid "Left"
msgstr "Venstre"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
msgstr "Venst. ekstr. vifte?"
msgstr "Venst. hotendvifte?"
#. MSG_BED_CORRECTION_LEFT c=14
#: ../../Firmware/ultralcd.cpp:2750
@ -1621,7 +1621,7 @@ msgstr "Trykk valghjulet for å forvarme dysen og fortsette."
msgid "Print aborted"
msgstr "Print avbrutt"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_pl.po
View File

@ -537,11 +537,11 @@ msgstr ""
msgid "Extruder"
msgstr "Ekstruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "WentHotend:"
msgid "Hotend fan:"
msgstr "Went. hotend:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1001,7 +1001,7 @@ msgstr "Ostatnie bledy druku"
msgid "Left"
msgstr "Lewa"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1627,7 +1627,7 @@ msgstr "Wcisnij pokretlo aby rozgrzac dysze i kontynuowac."
msgid "Print aborted"
msgstr "Druk przerwany"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_ro.po
View File

@ -538,11 +538,11 @@ msgstr "Cuplare idler"
msgid "Extruder"
msgstr "Extruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Vent. extruder:"
msgid "Hotend fan:"
msgstr "Vent. hotend:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1013,7 +1013,7 @@ msgstr "Err. ultimului print"
msgid "Left"
msgstr "Stanga"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1642,7 +1642,7 @@ msgstr "Apasati butonul pentru a preincalzi extruder-ul si continuati."
msgid "Print aborted"
msgstr "Print anulat"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_sk.po
View File

@ -537,11 +537,11 @@ msgstr "Zapojenie idlera"
msgid "Extruder"
msgstr "Extruder"
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Extruder vent.:"
msgid "Hotend fan:"
msgstr "Hotend vent.:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1012,7 +1012,7 @@ msgstr "Zlyhanie posl. tlace"
msgid "Left"
msgstr "Vlavo"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1642,7 +1642,7 @@ msgstr "Pre nahriatie trysky a pokracovanie stlacte tlacidlo."
msgid "Print aborted"
msgstr "Tlac prerusena"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

8
lang/po/Firmware_sl.po
View File

@ -523,10 +523,10 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgid "Hotend fan:"
msgstr ""
#. MSG_INFO_EXTRUDER c=18
@ -975,7 +975,7 @@ msgstr ""
msgid "Left"
msgstr ""
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1590,7 +1590,7 @@ msgstr ""
msgid "Print aborted"
msgstr ""
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"

10
lang/po/Firmware_sv.po
View File

@ -537,11 +537,11 @@ msgstr ""
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7319
msgid "Extruder fan:"
msgstr "Extruderfläkt:"
msgid "Hotend fan:"
msgstr "Hotend-fläkt:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1722
@ -1004,7 +1004,7 @@ msgstr "Senaste utskriftsfel"
msgid "Left"
msgstr "Vänster"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#. MSG_SELFTEST_HOTEND_FAN c=20
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
msgid "Left hotend fan?"
@ -1632,7 +1632,7 @@ msgstr "Tryck på knappen för att förvärma munstycket och fortsätta."
msgid "Print aborted"
msgstr "Utskriften avbröts"
#. MSG_PRINT_FAN_SPEED c=16
#. MSG_PRINT_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
#: ../../Firmware/ultralcd.cpp:7322
msgid "Print fan:"