josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE 

MK3 Add Gcode to wait for minimum PINDA temp
This commit is contained in:
PavelSindler 2018-04-11 16:40:21 +02:00 committed by GitHub
parent 1e1531a4f8 1df91e5656
commit f70685a92d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 43 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
Firmware/Marlin_main.cpp
View File

@ -232,6 +232,7 @@
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
// M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] // M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
// M666 - Wait for PINDA thermistor to reach target temperature.
// M900 - Set LIN_ADVANCE options, if enabled. See Configuration_adv.h for details. // M900 - Set LIN_ADVANCE options, if enabled. See Configuration_adv.h for details.
// M907 - Set digital trimpot motor current using axis codes. // M907 - Set digital trimpot motor current using axis codes.
// M908 - Control digital trimpot directly. // M908 - Control digital trimpot directly.
@ -4967,6 +4968,48 @@ Sigma_Exit:
#endif #endif
break; break;
#ifdef PINDA_THERMISTOR
case 666: // M666 - Wait for PINDA thermistor to reach target temperature.
{
int setTargetPinda = 0;
if (code_seen('S')) {
setTargetPinda = code_value();
} else {
break;
}
LCD_MESSAGERPGM(MSG_PLEASE_WAIT);
SERIAL_PROTOCOLPGM("Wait for PINDA target temperature:");
SERIAL_PROTOCOL(setTargetPinda);
SERIAL_PROTOCOLLN("");
codenum = millis();
cancel_heatup = false;
KEEPALIVE_STATE(NOT_BUSY);
while ( (!cancel_heatup) && current_temperature_pinda < setTargetPinda) {
if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while waiting.
{
SERIAL_PROTOCOLPGM("P:");
SERIAL_PROTOCOL_F(current_temperature_pinda,1);
SERIAL_PROTOCOLPGM("/");
SERIAL_PROTOCOL(setTargetPinda);
SERIAL_PROTOCOLLN("");
codenum = millis();
}
manage_heater();
manage_inactivity();
lcd_update();
}
LCD_MESSAGERPGM(MSG_OK);
break;
}
#endif //PINDA_THERMISTOR
#if defined(FAN_PIN) && FAN_PIN > -1 #if defined(FAN_PIN) && FAN_PIN > -1
case 106: //M106 Fan On case 106: //M106 Fan On
if (code_seen('S')){ if (code_seen('S')){