josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Start PWM timers _after_ initializing min/maxtemp ranges 

This would otherwise cause check_temp_raw() to operate on unitialized
values and trigger failures too early.
This commit is contained in:
Yuri D'Elia 2022-06-09 00:10:30 +02:00
parent f1d88ebd40
commit f82048977a
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
Firmware/temperature.cpp
View File

@ -704,15 +704,6 @@ void soft_pwm_init()
digitalWrite(MAX6675_SS,1);
#endif
timer0_init(); //enables the heatbed timer.
// timer2 already enabled earlier in the code
// now enable the COMPB temperature interrupt
OCR2B = 128;
ENABLE_SOFT_PWM_INTERRUPT();
timer4_init(); //for tone and Extruder fan PWM
#ifdef HEATER_0_MINTEMP
minttemp[0] = HEATER_0_MINTEMP;
while(analog2temp(minttemp_raw[0], 0) < HEATER_0_MINTEMP) {
@ -813,6 +804,15 @@ void soft_pwm_init()
#endif
}
#endif //AMBIENT_MAXTEMP
timer0_init(); //enables the heatbed timer.
// timer2 already enabled earlier in the code
// now enable the COMPB temperature interrupt
OCR2B = 128;
ENABLE_SOFT_PWM_INTERRUPT();
timer4_init(); //for tone and Extruder fan PWM
}
#if (defined (TEMP_RUNAWAY_BED_HYSTERESIS) && TEMP_RUNAWAY_BED_TIMEOUT > 0) || (defined (TEMP_RUNAWAY_EXTRUDER_HYSTERESIS) && TEMP_RUNAWAY_EXTRUDER_TIMEOUT > 0)