diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index ed11ab7a5..a1ac07105 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -5855,7 +5855,7 @@ Sigma_Exit:
           extruder = code_value();
 		  if(extruder >= EXTRUDERS) {
             SERIAL_ECHO_START;
-            SERIAL_ECHO(_i("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER c=0 r=0
+            SERIAL_ECHO(_n("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER c=0 r=0
             break;
           }
         }
@@ -7677,19 +7677,19 @@ bool setTargetedHotend(int code, uint8_t &extruder)
       SERIAL_ECHO_START;
       switch(code){
         case 104:
-          SERIAL_ECHORPGM(_i("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER c=0 r=0
+          SERIAL_ECHORPGM(_n("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER c=0 r=0
           break;
         case 105:
-          SERIAL_ECHO(_i("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER c=0 r=0
+          SERIAL_ECHO(_n("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER c=0 r=0
           break;
         case 109:
-          SERIAL_ECHO(_i("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER c=0 r=0
+          SERIAL_ECHO(_n("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER c=0 r=0
           break;
         case 218:
-          SERIAL_ECHO(_i("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER c=0 r=0
+          SERIAL_ECHO(_n("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER c=0 r=0
           break;
         case 221:
-          SERIAL_ECHO(_i("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER c=0 r=0
+          SERIAL_ECHO(_n("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER c=0 r=0
           break;
       }
       SERIAL_PROTOCOLLN((int)extruder);
diff --git a/lang/lang_en.txt b/lang/lang_en.txt
index 6ca5842f2..d2da35d1e 100644
--- a/lang/lang_en.txt
+++ b/lang/lang_en.txt
@@ -460,30 +460,12 @@
 #MSG_LOOSE_PULLEY c=20 r=1
 "Loose pulley"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-
 #
 "Load to nozzle"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-
 #MSG_MAIN c=0 r=0
 "Main"
 
diff --git a/lang/lang_en_cz.txt b/lang/lang_en_cz.txt
index f3e396b89..9b10080da 100644
--- a/lang/lang_en_cz.txt
+++ b/lang/lang_en_cz.txt
@@ -614,38 +614,14 @@
 "Loose pulley"
 "Uvolnena remenicka"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-"M104 Neplatny extruder "
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-"M105 Neplatny extruder "
-
 #
 "Load to nozzle"
 "Zavest do trysky"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-"M109 Neplatny extruder "
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 "M117 Kal. prvni vrstvy"
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-"M200 Neplatny extruder "
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-"M218 Neplatny extruder "
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-"M221 Neplatny extruder "
-
 #MSG_MAIN c=0 r=0
 "Main"
 "Hlavni nabidka"
diff --git a/lang/lang_en_de.txt b/lang/lang_en_de.txt
index b95c65bec..061f3aa2d 100644
--- a/lang/lang_en_de.txt
+++ b/lang/lang_en_de.txt
@@ -614,38 +614,14 @@
 "Loose pulley"
 "Lose Riemenscheibe"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-"M104 Falscher Extruder "
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-"M105 Falscher Extruder "
-
 #
 "Load to nozzle"
 "In Druckduese laden"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-"M109 Falscher Extruder "
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 "M117 Erste-Schicht Kal."
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-"M200 Falscher Extruder "
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-"M218 Falscher Extruder "
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-"M221 Falscher Extruder "
-
 #MSG_MAIN c=0 r=0
 "Main"
 "Hauptmenue"
diff --git a/lang/lang_en_es.txt b/lang/lang_en_es.txt
index 1fb914fdd..68135b934 100644
--- a/lang/lang_en_es.txt
+++ b/lang/lang_en_es.txt
@@ -614,38 +614,14 @@
 "Loose pulley"
 "Polea suelta"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-"M104 Extrusor invalido"
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-"M105 Extrusor invalido"
-
 #
 "Load to nozzle"
 "Cargar a la boquilla"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-"M109 Extrusor invalido"
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 "M117 Cal. primera cap."
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-"M200 Extrusor invalido"
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-"M218 Extrusor invalido"
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-"M221 Extrusor invalido"
-
 #MSG_MAIN c=0 r=0
 "Main"
 "Menu principal"
diff --git a/lang/lang_en_fr.txt b/lang/lang_en_fr.txt
index 6a68b718e..bb822e78e 100644
--- a/lang/lang_en_fr.txt
+++ b/lang/lang_en_fr.txt
@@ -614,38 +614,14 @@
 "Loose pulley"
 "Poulie lache"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-"M104 extrudeur invalide"
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-"M105 extrudeur invalide"
-
 #
 "Load to nozzle"
 "Charger le fil"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-"M109 extrudeur invalide"
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 "M117 Cal. 1ere couche"
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-"M200 extrudeur invalide"
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-"M218 extrudeur invalide"
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-"M221 extrudeur invalide"
-
 #MSG_MAIN c=0 r=0
 "Main"
 "Principal"
diff --git a/lang/lang_en_it.txt b/lang/lang_en_it.txt
index 13af94d9b..60ccdf1f6 100644
--- a/lang/lang_en_it.txt
+++ b/lang/lang_en_it.txt
@@ -614,38 +614,14 @@
 "Loose pulley"
 "Puleggia lenta"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-"M104 Estrusore non valido"
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-"M105 Estrusore non valido"
-
 #
 "Load to nozzle"
 "Carica ugello"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-"M109 Estrusore non valido"
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 "M117 Calibrazione primo layer."
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-"M200 Estrusore non valido"
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-"M218 Estrusore non valido"
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-"M221 Estrusore non valido"
-
 #MSG_MAIN c=0 r=0
 "Main"
 "Menu principale"
diff --git a/lang/lang_en_pl.txt b/lang/lang_en_pl.txt
index c859c4b42..393370bbf 100644
--- a/lang/lang_en_pl.txt
+++ b/lang/lang_en_pl.txt
@@ -614,38 +614,14 @@
 "Loose pulley"
 "Luzne kolo pasowe"
 
-#MSG_M104_INVALID_EXTRUDER c=0 r=0
-"M104 Invalid extruder "
-"M104 Nieprawidlowy ekstruder"
-
-#MSG_M105_INVALID_EXTRUDER c=0 r=0
-"M105 Invalid extruder "
-"M105 Nieprawidlowy ekstruder"
-
 #
 "Load to nozzle"
 "Zaladuj do dyszy"
 
-#MSG_M109_INVALID_EXTRUDER c=0 r=0
-"M109 Invalid extruder "
-"M109 Nieprawidlowy ekstruder"
-
 #MSG_M117_V2_CALIBRATION c=25 r=1
 "M117 First layer cal."
 "M117 Kal. 1. warstwy"
 
-#MSG_M200_INVALID_EXTRUDER c=0 r=0
-"M200 Invalid extruder "
-"M200 Nieprawidlowy ekstruder"
-
-#MSG_M218_INVALID_EXTRUDER c=0 r=0
-"M218 Invalid extruder "
-"M218 Nieprawidlowy ekstruder"
-
-#MSG_M221_INVALID_EXTRUDER c=0 r=0
-"M221 Invalid extruder "
-"M221 Nieprawidlowy ekstruder"
-
 #MSG_MAIN c=0 r=0
 "Main"
 "Menu glowne"