ebf8b16df5
Fix MMU2_CHECK_FILAMENT_PRESENCE_EXTRUSION_LENGTH for MMU2
2023-04-02 11:35:17 +02:00
bbfc4b9f78
PFW-1504 initial commit
...
Change in memory:
Flash: +162 bytes
SRAM: 0 bytes
2023-03-13 06:47:08 +01:00
ed80defc2c
Shorten the Try-Load-Unload sequence
...
... and allow easier future tweking in case of need
Also, save ~30B of code by returning the previous E-motor position.
2023-02-01 06:38:19 +01:00
d2f3835b2c
Fixup after review
2023-01-31 09:35:22 +01:00
ce7ab1d73c
Fixup: build MK25/MK3 (non-S)
2022-12-30 14:23:44 +01:00
b2b7990cfc
Allow tweaking try-unload feedrates
...
It looks like MMU2_VERIFY_LOAD_TO_NOZZLE_FEED_RATE can get much higher that the original 20mm/s.
50mm/s is the default now, can be tweaked further.
2022-12-30 14:23:44 +01:00
70356b71df
Handle filament sensor position that is not 0
2022-12-19 23:41:43 +01:00
6ee5f08505
PFW-1439 Compensate load to nozzle extruder sequence for Extra Loading Distance
...
The Extra Loading Distance is configurable by the user.
We need to compensate the hardcoded sequence
such that it does not extrude too much or
too little. Currently the firmware
extrudes too little.
2022-12-19 21:12:11 +00:00
5c1c6d9f3b
Adjust MMU2 specific distances
2022-12-18 10:30:43 +01:00
8623d9ff55
Split the mmu2 config into MMU2 and MMU2S
2022-12-18 09:58:20 +01:00
Alex Voinea
Guðni Már Gilbert
D.R.racer