5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
a3ad74a6be
status screen fix
2018-03-13 19:08:19 +01:00
8ec3c0fd7e
removed "Printer disconnected" message
2018-03-13 18:50:56 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
16f9f35451
static_assert replaced with error directive
2018-03-13 16:47:38 +01:00
0c97f46f25
Merge pull request #551 from XPila/MK3-new_xyz_cal
...
New XYZ calibration with image processing
2018-03-13 16:17:50 +01:00
a23ac6db7d
Merge pull request #550 from mkbel/safety_timer_MK3
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:03:45 +01:00
701dc55f4e
Merge pull request #549 from mkbel/safety_timer
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:02:09 +01:00
f487691070
Merge pull request #536 from mkbel/menu_return
...
Menu return
2018-03-13 14:30:48 +01:00
98e96c9182
Merge pull request #457 from bubnikv/MK3_fast_dbg
...
Mk3 fast dbg
2018-03-13 14:13:29 +01:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
6b08cdeaf1
Safety timer (disable heaters after 15min idle)
2018-03-12 23:45:10 +01:00
262e800db7
Safety timer (disable heaters after 15min idle)
2018-03-12 23:35:50 +01:00
66dc65ecd4
version changed
2018-03-09 14:15:47 +01:00
d512c9c9c2
version changed
2018-03-08 14:48:01 +01:00
976e5a6a19
Temperature calibration - remove steel
2018-03-07 21:45:55 +01:00
b902d91760
changed version
2018-03-07 21:02:07 +01:00
b41d680adf
Replace problematic character in comment.
2018-03-07 20:58:15 +01:00
8ff028820a
Remove redundant parameter.
2018-03-07 20:55:01 +01:00
abb9aa0a16
not using homing currents in axis selftest
2018-03-07 20:42:15 +01:00
2a53686d2f
Document valid usage of lcd_goto_menu(), remove redundant parameter.
2018-03-07 20:40:59 +01:00
1aba608133
Document valid usage of lcd_goto_menu(), wrap lcd_second_serial_set() by HAS_SECOND_SERIAL_PORT macro.
2018-03-07 18:30:33 +01:00
0c961dedc4
Reset menu stack in lcd_return_to_status().
...
Mark menuStack.reset() as redundant in lcd_status_screen(), but leave it there to be sure.
2018-03-07 18:15:24 +01:00
716098c434
Preserve position in menu move axis Extruder.
2018-03-07 17:27:27 +01:00
d0a98dc6cc
Document valid usage of lcd_goto_menu().
2018-03-07 17:18:10 +01:00
0871925353
Remove special handling of lcd_move_z after long button press. Convert lcd_move_z after long button press to ordinary menu_action_submenu.
...
Known bug (feature) is, that with current maximum stack depth, when long press is activated in menu > settings > move axis > Move X and then Move Z is deactivated, menu is returned to "move axis" and not to "Move X".
2018-03-07 17:03:17 +01:00
77c3d7d7f7
Review and document lcd_adjust_bed_reset() lcd_goto_menu() usage.
2018-03-07 16:47:20 +01:00
f41584524e
Merge pull request #534 from PavelSindler/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:13:16 +01:00
6ba07a358b
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 16:08:19 +01:00
33a7723fba
Merge pull request #533 from bubnikv/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:03:50 +01:00
fb4230f80d
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 15:46:46 +01:00
e3967e444b
SafetyTimer disabled
...
Watchdog disabled
watchdog.cpp and watchdog.h source code removed (using directly <avr/wdt.h>)
2018-03-07 14:13:34 +01:00
b7df176a46
Preserve position in menu Live adjust Z.
2018-03-06 22:45:47 +01:00
ed0e7a8b58
Preserve position in menu move axis.
2018-03-06 21:27:06 +01:00
020269a83c
Fix unable to go back from main menu to status screen.
2018-03-06 21:26:14 +01:00
e551ed1f6e
Replace lcd_goto_menu(...) by menu_action_back() in lcd_menu_fails_stats();
2018-03-06 19:51:13 +01:00
235803bc2a
Move encoder stack to separate class MenuStack. Add menu record to MenuStack.
...
It was needed to add menuFunc_t menu to stack, as in some places in menu, it is impossible to hardcode parent menu. Example: lcd_babystep_z can be invoked both from main_menu() and settings_menu() depending on printer status.
2018-03-06 19:47:27 +01:00
55065cf124
Merge pull request #530 from PavelSindler/temp_cal_fix
...
steps per unit changed to 0.95%; changed temp cal. warnings, changed …
2018-03-06 18:26:37 +01:00
c986ac14ec
pinda thermistor pin changed
2018-03-06 18:09:25 +01:00
27659ae69e
steps per unit changed to 0.95%; changed temp cal. warnings, changed pin for PINDA probe
2018-03-06 16:48:39 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
2b7e50e45b
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-06 13:03:38 +01:00
15e7b88834
Merge pull request #528 from bubnikv/M221_fix
...
Fix of calculate_extrusion_multipliers().
2018-03-06 13:00:57 +01:00
54749cbcba
Merge pull request #524 from mkbel/Add_fail_stats
...
Add fail statistics menu item for MK25.
2018-03-06 11:55:22 +01:00
115416dc60
Merge pull request #520 from mkbel/MK25
...
Remove Rpi port menu item for MK25.
2018-03-06 11:53:37 +01:00
ee2de71d26
searching for point xy updated to be more reliable, max z error enlarged to speed up calibration
2018-03-06 11:51:31 +01:00
67fd467ebe
Add fail statistics menu item for MK25.
...
As there is only filament sensor and no crash and power interruption detection, squash everything into single screen.
2018-03-05 21:42:04 +01:00
fc3af0533a
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-05 21:31:31 +01:00
a0bcfc7d95
Fix after merge (symbol calculate_volumetric_multipliers() renamed
...
to calculate_extruder_multipliers())
2018-03-05 19:28:57 +01:00
11e7eb27ee
Merge remote-tracking branch 'remotes/origin/M221_fix' into MK3_fast_dbg
2018-03-05 19:13:07 +01:00
c9b5ab0e88
area for improving calibration point enlarged
2018-03-05 18:09:48 +01:00
7164e66e4d
Remove Rpi port menu item for MK25.
2018-03-05 17:14:20 +01:00
74fa599f48
Remove Rpi port menu item for MK25.
2018-03-05 17:04:01 +01:00
0f082fa1f7
Merge pull request #518 from PavelSindler/auto_power_2
...
Auto power mode for MK25
2018-03-05 11:42:00 +01:00
917689b5ce
tune menu
2018-03-05 01:23:18 +01:00
1033bd3cf9
info on serial not used
2018-03-05 00:48:10 +01:00
a369c7900e
tune menu updated
2018-03-05 00:47:34 +01:00
ca3ba55ca7
initial version
2018-03-05 00:46:24 +01:00
5254044816
no points on first row for new xyz cal. version,
...
waiting for user to press knob on found points when verbosity level >=20
2018-03-05 00:17:43 +01:00
f1410a37f2
samle z after xyz cal. added, find_point_xy: initial z coordinate after first hit lowered
2018-03-04 23:49:54 +01:00
8800793dd1
removing debug code
2018-03-04 20:49:34 +01:00
ad702c6d1f
improved algorithm for first hit, improving sensor point changed, just one calibration round for 4point heatbed (no second run for improving measured coordinates)
2018-03-04 20:21:31 +01:00
15a7699fe0
max error for searching in xy
2018-03-03 20:05:43 +01:00
1f2c4fc5ad
version changed
2018-03-01 15:52:53 +01:00
644c4f771b
Merge pull request #509 from XPila/MK3
...
bugfix - beltstatus overflow
2018-03-01 14:49:13 +01:00
fb8a28d120
bugfix - beltstatus overflow
2018-03-01 14:34:21 +01:00
98f0efbc66
debug
2018-02-28 11:09:34 +01:00
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
2018-02-27 17:52:13 +01:00
0d1cafded5
dont improve position of point in first row
2018-02-26 19:26:49 +01:00
e249e854da
dev version: print m114 coordinates when z endstop was triggered
2018-02-26 18:25:47 +01:00
e2b835b881
version change
2018-02-23 17:53:15 +01:00
4309c8951c
fix - false fancheck error at end of print
2018-02-23 17:40:16 +01:00
dfb1ffdba0
Merge remote-tracking branch 'upstream/MK3' into MK3-accurate_homming
2018-02-23 17:13:56 +01:00
73b0349898
fix - Z movement speed in selftest
...
conditional translation for linearity correction and variable resolution
2018-02-23 16:31:24 +01:00
af5cfe76b5
Merge pull request #495 from XPila/MK3-accurate_homming
...
Accurate homing, fix - enabled after selftest.
2018-02-22 20:54:08 +01:00
06da2bb915
Accurate homing, fix - enabled after selftest.
...
Experimantal menu - conditional translation.
2018-02-22 20:50:34 +01:00
ae50a1a768
checking fan speed synchronized with block currently processed
2018-02-22 17:12:24 +01:00
49832d4d3b
Safety timer (disable heaters after 15min idle)
2018-02-22 16:46:17 +01:00
cff7b9b396
Unified the volumetric_multiplier with extrusion_multiply to improve
...
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.
Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-22 14:53:10 +01:00
4e3ea41ba4
Fix of a loss in precission when the extruder multiplier is set
...
with M221. For 50um layers, the precision loss leads to holes
in the print.
2018-02-22 14:52:36 +01:00
d020f48791
Merge pull request #485 from bubnikv/M221_fix
...
Unified the volumetric_multiplier with extrusion_multiply to improve
2018-02-22 14:17:09 +01:00
03a1bef4ee
Merge pull request #489 from PavelSindler/xyz_corrections_3
...
typo fixed
2018-02-22 13:41:22 +01:00
819f2fd2b3
typo fixed
2018-02-22 13:40:31 +01:00
30bb84a7a7
Merge pull request #487 from PavelSindler/eeprom_printer_versions
...
Eeprom hw versions
2018-02-22 11:48:26 +01:00
ad33d3efd1
Merge pull request #488 from PavelSindler/xyz_corrections_3
...
Xyz corrections
2018-02-22 11:48:06 +01:00
edc6366df2
Merge pull request #479 from PavelSindler/z_cal_fix
...
x_max_pos correction
2018-02-22 10:47:24 +01:00
7a31fc5b6e
Merge pull request #486 from XPila/MK25
...
Pinout, conditional translation and variant file for MK2
2018-02-22 10:45:56 +01:00
90e00b56a5
some defines moved to another position
2018-02-22 10:42:02 +01:00
a4b3389dfa
M45 verbosity, steel sheet define, minor modifications in xyz cal
2018-02-22 10:38:46 +01:00
0fb471f528
whitespace
2018-02-22 00:11:17 +01:00
0323af531d
printer types and motherboard types added to eeprom; min extrude temp lowered because of woodfil
2018-02-22 00:09:12 +01:00
c5175e97ec
Pinout, conditional translation and variant file for MK2
2018-02-21 15:19:34 +01:00
ba49c21f17
Unified the volumetric_multiplier with extrusion_multiply to improve
...
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.
Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-21 11:25:21 +01:00
74e6ff67d3
Merge pull request #482 from bubnikv/M221_fix
...
M221 fix
2018-02-20 19:10:07 +01:00
66161062cf
Homing accuracy calibration in selftest.
2018-02-20 19:02:55 +01:00
e2e48bfd71
SD speed test (DEBUG)
...
homeaxis - fix set_destination_to_current
2018-02-20 18:50:20 +01:00
d91dbc73c9
tmc2130 - optimalization, removed unused code
2018-02-20 17:06:37 +01:00
ee5949c56e
Fix of a loss in precission when the extruder multiplier is set
...
with M221. For 50um layers, the precision loss leads to holes
in the print.
2018-02-20 15:30:18 +01:00
403ed26d47
Merge remote-tracking branch 'remotes/upstream/MK3' into MK3
2018-02-20 15:21:44 +01:00
PavelSindler
Robert Pelnar
PavelSindler
Marek Bel
bubnikv