josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,986 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

56 Commits

Author SHA1 Message Date
Yuri D'Elia 12e124324f Remove PROGMEM handling from print_mem until D5 uses dcode_core 
Handling PROGMEM also requires a 32bit address type.
 2021-06-07 16:41:25 +02:00
Yuri D'Elia f9371146d0 Implement reading XFLASH with D6 
This requires expanding the dcode_core address type to 32bit type,
thus enlarges the D2/D3 implementation as a result.

Still allow to save all the original space if D6 is disabled, for now.
 2021-06-07 16:41:25 +02:00
Yuri D'Elia 915f5a7692 Unify D2 and D3 handling 
Handle reading/writing memory using the same base functions
in order to save space.
 2021-06-07 16:41:25 +02:00
Yuri D'Elia 2d25a5705f Fix D2 to read the entire SRAM content 
Allow to read up to 0x21ff, which is the last byte of SRAM.  Set default
starting address to 0x200, which is the first true byte.

0x0-200 is mapped to register/io space and could cause issues when read
from bi-directional registers.
 2021-06-07 16:37:34 +02:00
Yuri D'Elia 62f496e1d6 Allow D2 to be enabled selectively 2021-06-07 16:37:34 +02:00
Alex Voinea c951bea627
Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
Voinea Dragos da21916473 Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
D.R.racer c710253cca Code cleanup and size reduction and RAM optimization 
Replase single character strings with single characters when calling
lcd_print
 2021-01-22 17:11:51 +01:00
Alex Voinea 8d9dc73d1b
Fix compile error 
fix compile


Fix compile error
 2020-08-12 17:25:49 +03:00
Alex Voinea 5530b99882
Reboot after factory reset 2020-08-12 12:46:35 +03:00
DRracer c8f67f2279
Merge pull request #2568 from 3d-gussner/MK3_Dcodes_move 
D- codes move
 2020-04-03 11:12:30 +02:00
3d-gussner a1b8ee67b3
Fix missing (hex) in D5 code (#2560) 
* Fix missing (hex) in D5 code

* Make ALL D-codes available for DEBUG mode
until now D3 and D5 needed to be defined separately

* Forgot to modify Marlin_main
 2020-04-02 14:56:19 +02:00
3d-gussner 957bfd89e3 Merge remote-tracking branch 'upstream/MK3' into MK3_Dcodes_move 2020-03-30 16:56:59 +02:00
3d-gussner 6da401be56 Move few D-codes command from Marlin_main to Dcodes 
D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
 2020-03-30 16:53:58 +02:00
Alex Voinea f13269d8a9
Code cleanup 2020-03-30 16:50:50 +03:00
Alex Voinea 104f81cd27
Fix case sensitive include 2020-03-30 15:42:30 +03:00
Alex Voinea 988ba6d8b0
Fix DEBUG_BUILD 2020-03-30 15:38:01 +03:00
3d-gussner 2ceec597a5 Fix typo 2020-03-26 14:08:35 +01:00
3d-gussner 4c518545f1 Updated the documentation 
copy past from Marlin_main.cpp doxygen documentation d-codes
 2020-03-25 17:33:10 +01:00
3d-gussner a355fdd00d
And another one 
sorry
 2020-01-31 15:40:07 +01:00
3d-gussner b466dad1d7
Fix copy paste issues D2 D5 
Fixed copy paste
 2020-01-31 15:27:19 +01:00
3d-gussner 17e23693eb Fixed stuipid copy paste error 2019-12-04 14:21:43 +01:00
3d-gussner 0ce7c51c1d Added more D-codes to RR Wiki and doxygen 
D-1, D80, D81, D106
 2019-12-03 20:02:58 +01:00
3d-gussner 660b646b57 RR Wiki for Dcodes 
open D-1, D80, D81, D106, D2130
 2019-11-27 11:29:55 +01:00
Robert Pelnar 18dec75b56 MK2.5 - watchdog enabled + test (command "D-1") 2019-04-29 13:19:59 +02:00
Marek Bel 4100bd33a7 Fix Dcodes compilation errors and warnings. 2019-03-19 13:53:58 +01:00
PavelSindler 01529f18d2 upstream/MK3 merge 2018-10-25 20:57:27 +02:00
Robert Pelnar ac18eb67c0 New lang, arduino 1.8.5 - boot_app debug output 
+ variable _uartout linkage fix
+ DEBUG_DCODE5
 2018-10-18 16:20:14 +02:00
Marek Bel d66da30843 Fix compiler warning: sketch/Dcodes.cpp: In function 'void dcode_3()': 
sketch/Dcodes.cpp:117:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
    for (int i = 0; i < count; i++)
 2018-08-02 14:13:29 +02:00
Marek Bel 15c598fd6a Fix compiler warning: sketch/Dcodes.cpp: In function 'void print_eeprom(uint16_t, uint16_t, uint8_t)': 
sketch/Dcodes.cpp:37:12: warning: unused variable 'data' [-Wunused-variable]
 2018-08-02 14:13:29 +02:00
Robert Pelnar 691e7a24ed EEPROM dump (code D3) 2018-07-26 13:20:35 +02:00
Robert Pelnar 92997204a1 Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20 2018-04-03 12:30:35 +02:00
Marek Bel 9cb036fbcb Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2 2018-03-28 19:11:02 +02:00
Marek Bel 397e7d4791 Increase resolution of wave factor. 2018-03-26 15:17:06 +02:00
Marek Bel 3d299cc412 Document. 2018-03-14 21:05:47 +01:00
Robert Pelnar ac1a56b493 Merge branch 'MK25' into MK3 2018-03-13 20:43:19 +01:00
Robert Pelnar dff8c29362 Microstep linearity correction, optimized wave compression. 
Correction factor can be adjusted from 0.9 to 1.25 by 0.005 steps.
 2018-02-17 19:58:40 +01:00
Robert Pelnar 57499dc6a0 M350 for E axis (8, 16, 32, 64, 128 microsteps) 2018-02-15 15:40:49 +01:00
Robert Pelnar 79caf3d9c6 tmc2130 optimalization, accurate homing and microstep linearity correction 
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
 2018-02-15 04:17:58 +01:00
Robert Pelnar 31e6271b2c Voltage measurement - conditional translation 2018-02-08 21:07:17 +01:00
Robert Pelnar b08636c554 fix - conditional translation for DEBUG build 2018-02-08 18:56:15 +01:00
Robert Pelnar 210b97d16d New fail stats (global, last print), crashdetection X and Y separated 2018-01-30 13:10:36 +01:00
Robert Pelnar 39bd5c3a1d Extruder stealthChop and constant-off-time mode. 
Extruder different chopper frequency in spreadcycle.
Dcodes (fix)
 2018-01-25 05:13:21 +01:00
bubnikv 44dc12005f Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
Robert Pelnar 25dd6dd673 new module adc (analog2digital) 
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
 2017-12-20 13:42:20 +01:00
Robert Pelnar 1113124bde PINDA calibration and precalibrated characteristics. 2017-11-27 07:09:53 +01:00
Robert Pelnar 4dae6f871e Sg load meassurement durring self test - 'Belt status' 2017-11-27 04:46:58 +01:00
Robert Pelnar f2e9bdef24 Fsensor synchronization and triggering improved 
Watchdog implemented (4s interval, triggered from manage_heater)
Stallguard sensitivity for XY decreased by 1
Extruder current adjusted to 5.5kg force
Build number = 111
 2017-11-24 21:53:35 +01:00
Robert Pelnar b8525f8043 Print class printf function (experimental, disabled by default) 
LiquidCrystal VT100 escape codes (EraseScreen, CursorHome, ...)
Stream support for lcd and uart, fprintf and printf (stdout=uartout)
Dcodes enabled, code reduced, printf used
Splash screen with esc codes
 2017-11-20 20:09:54 +01:00
Robert Pelnar aee62750e7 Build 109 2017-11-16 22:03:36 +01:00