2185f00cbd
Updates to last changes from Pavel
2017-05-18 12:16:39 +02:00
2fa97d5dfe
Added messages in czech and english for SNMM, service menu for adjusting bowden lengths; updated service menu to be extendable; M600: loading filament for SNMM updated; unload all filaments updated
2017-05-02 19:21:52 +02:00
94b7fb4846
Update to 3.0.10-10 version...
...
Pavel made 25 April 2017
2017-04-26 09:13:23 +02:00
7ec45271c2
timeout to status, better print time counting when using pause print
2017-04-21 16:29:04 +02:00
fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
2017-04-06 18:57:11 +02:00
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
2017-03-30 16:48:10 +02:00
64f4181451
initial version of long pause
2017-03-28 17:29:10 +02:00
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
2017-03-07 19:19:13 +01:00
fd3bb9c7e5
delay_keep_alive function fixed, induction probe temperature calibration
2017-03-01 11:10:29 +01:00
c441b4acdb
temp calibration initial version
2017-02-27 17:24:26 +01:00
241e32e691
Fixed "Shift out of range" bug in xyz calibration, status on demand added, temp reading disable in farm mode
2017-02-22 18:00:41 +01:00
590cc8f3e8
German language added, updated spanish language messages, checking if Z live adjust is in allowed range, chcecking for invalid gcodes added, fixed bug in total print time, fixed selftest to avoid false triggering, added auto home after selftest, removed farm mode menu feature, added experimental functions for checking bed properties
2017-02-14 11:52:48 +01:00
040a738202
improved load filament, creating M701
2017-01-20 15:43:02 +01:00
fcce374a14
initial version - merging from DEV multicolor
2017-01-09 13:12:39 +01:00
734ca2eb43
Added link monitor to farm mode
2016-12-14 14:59:01 +01:00
f9f9912fff
Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops.
...
Clean-up of some hard coded constants.
Fixed line edit error introduced in the preceding check-in.
Enable a high power mode when first booted up on a virgin RAMBo board.
2016-08-04 13:02:45 +02:00
ea6a948c6b
Removed the dual carriage code for readibility.
...
Removed support for the slow Toshiba stepper drivers.
2016-07-19 10:57:18 +02:00
58b2aa9fb8
Improvement of the bed skew calibration.
2016-07-04 19:00:42 +02:00
80971237b8
Polished the bed skew and shift calibration.
2016-06-23 19:08:45 +02:00
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
...
Implemented bed skew calibration by matching a precise physical model
to the measured data using the least squares method.
Rewrote handling of the command buffer to preserve memory
and allow pushing the commands to the front of the queue.
2016-06-23 08:46:15 +02:00
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
...
Fixed a problem with low RAM by re-vamping the langtool.
2016-06-16 14:29:04 +02:00
a4a80b3eb7
MK2 Firmware release.
2016-05-31 14:08:04 +02:00
f8c65e39ae
Reorginized the repository and added license
2016-02-21 15:02:31 +01:00
3d-gussner
PavelSindler
michalprusa
bubnikv
Josef Prusa