5bb9451b5d
Merge pull request #658 from XPila/MK3-V3_2
...
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message…
2018-04-24 20:54:53 +02:00
1553e99d8e
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-24 20:12:29 +02:00
5a9cc39562
Merge pull request #654 from XPila/MK3-V3_2
...
New current setting for MK3
2018-04-24 17:10:19 +02:00
f9d64bdfb1
Merge pull request #655 from mkbel/fix_z_home_point
...
Fix z home point
2018-04-24 16:51:57 +02:00
79b9f736aa
Merge pull request #657 from PavelSindler/temp_cal_update
...
Temp calibration update
2018-04-24 15:16:13 +02:00
8efe66ef99
remove tab
2018-04-24 14:34:49 +02:00
ffe93b2ca9
whitespace correction
2018-04-24 14:33:48 +02:00
cc74edfa13
whitespace
2018-04-24 14:23:52 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
468645e92e
Set DEFAULT_Y_OFFSET to 4 mm for MK3 printer.
2018-04-23 20:34:04 +02:00
37ebe5c35d
Move default correction matrix of not calibrated printer to world2machine_default() function. Use world2machine_reset() to uncorrected matrix. Call it from world2machine_revert_to_uncorrected() and from world2machine_default() if there is no default shift to remove code duplication.
2018-04-23 20:33:39 +02:00
9bd4d580d7
Use right calibration point. This change is only formal, as both original and new point have same coordinates.
2018-04-23 20:33:25 +02:00
cccd8246ab
Fix world2machine(const float &x, const float &y, float &out_x, float &out_y) not using input parameters if only WORLD2MACHINE_CORRECTION_SHIFT is applied.
2018-04-23 20:33:14 +02:00
864284f043
New current setting for MK3
...
X, Y: no change
Z: +26.1%
E: -28.5%
2018-04-23 20:17:45 +02:00
2467b19dd2
Merge pull request #647 from XPila/MK3-V3_2
...
XYZ cal fix (better histogram processing)
2018-04-23 14:54:23 +02:00
82b31e8552
Set [0;0] point offset for uncalibrated printer.
2018-04-20 15:01:11 +02:00
65aa62ebab
XYZ cal fix (better histogram processing)
2018-04-20 13:17:18 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
31ae097dba
mesh bed leveling / auto home Y coordinates updated
2018-04-18 17:09:12 +02:00
5791d9f0d8
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
2018-04-18 14:17:28 +02:00
cf99808aef
Merge pull request #624 from mkbel/update_version
...
Update version.
2018-04-13 19:55:21 +02:00
af6c1f8acb
Update version.
2018-04-13 19:53:51 +02:00
b90e8999df
Merge pull request #623 from mkbel/fix_safety_timer
...
Fix safety timer.
2018-04-13 19:43:36 +02:00
c88f0108af
Fix safety timer.
...
Constant parameter greater than 16 bits must by stated as unsigned long.
2018-04-13 19:30:08 +02:00
c5af3aaaf2
Merge pull request #622 from mkbel/fix_menu_return_fail_stats
...
Fix returning from Fail stats menu.
2018-04-13 18:35:03 +02:00
6f985d23d6
Fix returning from Fail stats menu.
2018-04-13 17:20:30 +02:00
03d03aeac4
Return to main menu from filament unloading.
2018-04-13 16:51:47 +02:00
e4a4c88be9
Merge pull request #615 from PavelSindler/selftest_MK25_fix
...
selftest for MK2.5: fan error fix
2018-04-13 13:59:15 +02:00
f3209e1aec
fixed possible feedmultiply change cause by entering main menu with negative encoder position
2018-04-13 10:27:55 +02:00
b1bb6841c9
Merge pull request #617 from mkbel/fix_farm_reset_1
...
Fix farm reset
2018-04-13 10:02:54 +02:00
5f3fed33cf
Merge pull request #613 from MRprusa3d/MK3
...
Add files via upload
2018-04-13 10:02:44 +02:00
388d6eea36
Fix printer resets in farm mode if command "PRUSA SN" is received and 32U2 processor is not responding.
2018-04-12 18:44:33 +02:00
08740356b8
Move "PRUSA SN" gcode to separate function.
2018-04-12 18:41:11 +02:00
591cb881cc
selftest: false fan error fix, added message in case that manual fan error fails
2018-04-12 18:24:30 +02:00
d09f190c2b
Add files via upload
2018-04-11 18:48:50 +00:00
78245ce566
farm preheat temperature for heatbed
2018-04-11 18:54:27 +02:00
e150d502ac
removed configuration_prusa
2018-04-11 18:49:42 +02:00
53d903e600
Merge pull request #610 from MRprusa3d/MK3
...
Add files via upload
2018-04-11 18:46:18 +02:00
6b5835fd9f
Merge pull request #612 from PavelSindler/M861_gcode
...
M861 gcode, temp cal is automaticly activated after calibration process
2018-04-11 18:45:57 +02:00
45d1dbbfe0
temp cal. active set to false
2018-04-11 18:37:07 +02:00
ce66699340
dont use default temp table for new printers and dont automaticly activate temp. cal. (new pinda probes have different characteristics)
2018-04-11 18:36:38 +02:00
52de4891fe
typo fixed
2018-04-11 18:32:27 +02:00
47eab97d2d
temp. calibration is automaticly activated after calibration process
2018-04-11 18:16:16 +02:00
0ba7850146
pinda temp table changed back
2018-04-11 17:40:04 +02:00
c69524c3fb
Merge pull request #611 from XPila/MK3-V3_2
...
removed Configuration_prusa.h
2018-04-11 17:33:37 +02:00
89efcb84b1
removed Configuration_prusa.h
...
fixed - compilation for MK25
2018-04-11 17:32:31 +02:00
919fba531a
wait for PINDA gcode changed
2018-04-11 16:48:47 +02:00
c8f1c55ec0
Add files via upload
2018-04-11 14:41:41 +00:00
f70685a92d
Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE
...
MK3 Add Gcode to wait for minimum PINDA temp
2018-04-11 16:40:21 +02:00
1e1531a4f8
Merge pull request #608 from MRprusa3d/MK3
...
Mk3
2018-04-11 16:37:34 +02:00
8da2330b93
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
...
ultralcd_implementation_hitachi - fixed link
2018-04-11 16:03:54 +02:00
716f1c63bf
Add files via upload
2018-04-10 18:08:57 +00:00
6b77e68924
Add files via upload
2018-04-10 18:07:08 +00:00
02fda70529
farm mode: preheat menu updated
2018-04-10 14:07:44 +02:00
da43aa0250
XYZ calibration tunning
2018-04-04 20:03:39 +02:00
3b26e1635a
XYZcal - better filtering.
2018-04-03 20:10:50 +02:00
630041ecb2
XYZcal - threshold changed from 32 to 16
2018-04-03 18:49:15 +02:00
339d2ebdef
Z-axis stealth mode
...
XYZcal fix
2018-04-03 18:26:39 +02:00
869a99d8ad
XYZ calibration - diagonal find_point_center
2018-04-03 15:05:57 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
dba2fd7e75
Merge pull request #589 from XPila/MK3-V3_2
...
New SPI, LiquidCrystal renamed
2018-03-29 18:20:29 +02:00
363a9d24b3
LiquidCrystal class renamed to LiquidCrystal_Prusa
2018-03-29 17:50:43 +02:00
186e630299
New SPI (do not use Arduino SPI class)
...
saved ~300bytes flash, 4bytes ram
2018-03-29 17:42:41 +02:00
cedb30303f
Add possible action on menu item back. This fixes broken Merge pull request #586 from mkbel/ustep_linearity_2 06d5ec5.
2018-03-29 11:42:44 +02:00
d5636fd023
Merge pull request #585 from PavelSindler/farm_mode_MK3
...
checking if file is complete temporarily not active in farm mode
2018-03-28 19:39:00 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
bde097cad1
bugfix - PFW233 - first homing in silent mode Y crash.
2018-03-28 19:22:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
6e15a77c9b
preheat menu update
2018-03-28 17:50:16 +02:00
95e751dd65
farm mode: preheat menu update
2018-03-28 17:04:46 +02:00
2c3c6c54f3
checking if file is complete temporarily not active in farm mode
2018-03-28 17:00:17 +02:00
8ba83a9789
bugfix - PFW226 - selftest error
2018-03-28 16:13:54 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
cf43b85de9
XYZ calibration - accuracy improvement
2018-03-27 17:27:41 +02:00
57bbb0e17d
Fix wraparound from lowest value to highest value in menu value edit.
2018-03-26 20:25:23 +02:00
397e7d4791
Increase resolution of wave factor.
2018-03-26 15:17:06 +02:00
903dce9716
Merge pull request #576 from PavelSindler/MK3_for_merging
...
stealth mode / silent mode
2018-03-23 20:42:08 +01:00
2ce75293f3
stealth mode / silent mode
2018-03-23 19:49:59 +01:00
5a7e76e02b
Merge pull request #575 from PavelSindler/adc_pins
...
Adc pins, pinda temp table
2018-03-23 19:36:23 +01:00
dc32bd24fc
correction
2018-03-23 18:20:55 +01:00
2d30261976
bed voltage menu hidden
2018-03-23 16:49:06 +01:00
7ad6fb526c
typo removed
2018-03-23 15:53:44 +01:00
78f9f6b611
use defines for adc pins, temp table for PIDNA update
2018-03-16 11:01:06 +01:00
e5faba7226
serial port set back (was previously changed for debugging purposes)
2018-03-15 14:42:03 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
3d299cc412
Document.
2018-03-14 21:05:47 +01:00
4bc1671953
version=3.2.0-alpha buildnumber=370 repository=Unknown
2018-03-14 16:33:50 +01:00
67e90b576a
Disabled force selftest
...
XYZ calibration tunning
2018-03-14 16:25:32 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
3ff5686336
MK2-25-3 variant files
2018-03-14 13:53:36 +01:00
2f98ac989a
Variant file for MK2 + cond. translation
2018-03-13 23:14:44 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
c163d8a9f7
Variant file for MK3
2018-03-13 22:40:20 +01:00
46cecb1bdf
deleted unused file
2018-03-13 20:44:06 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
27cc5e51c3
removed duplicit declaration of prusa_statistics function
2018-03-13 19:12:36 +01:00
5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
a3ad74a6be
status screen fix
2018-03-13 19:08:19 +01:00
8ec3c0fd7e
removed "Printer disconnected" message
2018-03-13 18:50:56 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
16f9f35451
static_assert replaced with error directive
2018-03-13 16:47:38 +01:00
0c97f46f25
Merge pull request #551 from XPila/MK3-new_xyz_cal
...
New XYZ calibration with image processing
2018-03-13 16:17:50 +01:00
a23ac6db7d
Merge pull request #550 from mkbel/safety_timer_MK3
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:03:45 +01:00
701dc55f4e
Merge pull request #549 from mkbel/safety_timer
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:02:09 +01:00
f487691070
Merge pull request #536 from mkbel/menu_return
...
Menu return
2018-03-13 14:30:48 +01:00
98e96c9182
Merge pull request #457 from bubnikv/MK3_fast_dbg
...
Mk3 fast dbg
2018-03-13 14:13:29 +01:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
6b08cdeaf1
Safety timer (disable heaters after 15min idle)
2018-03-12 23:45:10 +01:00
262e800db7
Safety timer (disable heaters after 15min idle)
2018-03-12 23:35:50 +01:00
1df91e5656
MK3 Add Gcode to wait for minimum PINDA temp
...
The PINDA temperature compensation is defined for values above 35C. To achieve an optimal first layer consistently it is vital to start the print with a temperature of >= 35C on the pinda probe.
When doing a manual pinda temperature calibration it is necessary to begin homing and mesh bed leveling at an exact temperature. This gcode is perfect for this.
Example startup code:
G28 W ; home all without mesh bed level
G0 Z50 ; raise Z to not heat PINDA before bed is warm
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G0 X50 Y50 Z0.15 ; this is a good PINDA heating position
M666 S35 ; the new code - wait until PINDA is >= 35C
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
See my forum post later for more explaination on my manual temperature calibration procedure. I will link it then.
2018-03-09 20:46:07 +01:00
66dc65ecd4
version changed
2018-03-09 14:15:47 +01:00
d512c9c9c2
version changed
2018-03-08 14:48:01 +01:00
976e5a6a19
Temperature calibration - remove steel
2018-03-07 21:45:55 +01:00
b902d91760
changed version
2018-03-07 21:02:07 +01:00
b41d680adf
Replace problematic character in comment.
2018-03-07 20:58:15 +01:00
8ff028820a
Remove redundant parameter.
2018-03-07 20:55:01 +01:00
abb9aa0a16
not using homing currents in axis selftest
2018-03-07 20:42:15 +01:00
2a53686d2f
Document valid usage of lcd_goto_menu(), remove redundant parameter.
2018-03-07 20:40:59 +01:00
1aba608133
Document valid usage of lcd_goto_menu(), wrap lcd_second_serial_set() by HAS_SECOND_SERIAL_PORT macro.
2018-03-07 18:30:33 +01:00
0c961dedc4
Reset menu stack in lcd_return_to_status().
...
Mark menuStack.reset() as redundant in lcd_status_screen(), but leave it there to be sure.
2018-03-07 18:15:24 +01:00
716098c434
Preserve position in menu move axis Extruder.
2018-03-07 17:27:27 +01:00
d0a98dc6cc
Document valid usage of lcd_goto_menu().
2018-03-07 17:18:10 +01:00
0871925353
Remove special handling of lcd_move_z after long button press. Convert lcd_move_z after long button press to ordinary menu_action_submenu.
...
Known bug (feature) is, that with current maximum stack depth, when long press is activated in menu > settings > move axis > Move X and then Move Z is deactivated, menu is returned to "move axis" and not to "Move X".
2018-03-07 17:03:17 +01:00
77c3d7d7f7
Review and document lcd_adjust_bed_reset() lcd_goto_menu() usage.
2018-03-07 16:47:20 +01:00
f41584524e
Merge pull request #534 from PavelSindler/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:13:16 +01:00
6ba07a358b
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 16:08:19 +01:00
33a7723fba
Merge pull request #533 from bubnikv/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:03:50 +01:00
fb4230f80d
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 15:46:46 +01:00
e3967e444b
SafetyTimer disabled
...
Watchdog disabled
watchdog.cpp and watchdog.h source code removed (using directly <avr/wdt.h>)
2018-03-07 14:13:34 +01:00
b7df176a46
Preserve position in menu Live adjust Z.
2018-03-06 22:45:47 +01:00
ed0e7a8b58
Preserve position in menu move axis.
2018-03-06 21:27:06 +01:00
020269a83c
Fix unable to go back from main menu to status screen.
2018-03-06 21:26:14 +01:00
e551ed1f6e
Replace lcd_goto_menu(...) by menu_action_back() in lcd_menu_fails_stats();
2018-03-06 19:51:13 +01:00
235803bc2a
Move encoder stack to separate class MenuStack. Add menu record to MenuStack.
...
It was needed to add menuFunc_t menu to stack, as in some places in menu, it is impossible to hardcode parent menu. Example: lcd_babystep_z can be invoked both from main_menu() and settings_menu() depending on printer status.
2018-03-06 19:47:27 +01:00
55065cf124
Merge pull request #530 from PavelSindler/temp_cal_fix
...
steps per unit changed to 0.95%; changed temp cal. warnings, changed …
2018-03-06 18:26:37 +01:00
c986ac14ec
pinda thermistor pin changed
2018-03-06 18:09:25 +01:00
27659ae69e
steps per unit changed to 0.95%; changed temp cal. warnings, changed pin for PINDA probe
2018-03-06 16:48:39 +01:00
a6f900fd3c
Merge remote-tracking branch 'upstream/MK25' into MK25
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2018-03-06 15:11:50 +01:00
2b7e50e45b
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-06 13:03:38 +01:00
15e7b88834
Merge pull request #528 from bubnikv/M221_fix
...
Fix of calculate_extrusion_multipliers().
2018-03-06 13:00:57 +01:00
54749cbcba
Merge pull request #524 from mkbel/Add_fail_stats
...
Add fail statistics menu item for MK25.
2018-03-06 11:55:22 +01:00
115416dc60
Merge pull request #520 from mkbel/MK25
...
Remove Rpi port menu item for MK25.
2018-03-06 11:53:37 +01:00
ee2de71d26
searching for point xy updated to be more reliable, max z error enlarged to speed up calibration
2018-03-06 11:51:31 +01:00
67fd467ebe
Add fail statistics menu item for MK25.
...
As there is only filament sensor and no crash and power interruption detection, squash everything into single screen.
2018-03-05 21:42:04 +01:00
fc3af0533a
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-05 21:31:31 +01:00
a0bcfc7d95
Fix after merge (symbol calculate_volumetric_multipliers() renamed
...
to calculate_extruder_multipliers())
2018-03-05 19:28:57 +01:00
XPila
PavelSindler
PavelSindler
Marek Bel
mkbel
MRprusa3d
Christoph Stahl
bubnikv