75d6942d81
Merge pull request #2836 from wavexx/remove_jerk_limits
...
Remove hard-coded X/Y jerk limits
2022-02-07 17:04:49 +01:00
f7542aa064
Report travel acceleration in M503
...
Use the new M204 format consistently also in M503's output
2021-02-03 11:20:28 +01:00
76911f67db
Take advantage of the new is_uninitialized function
...
Save some space and perform some cleanup
2021-02-03 11:20:28 +01:00
45811f82aa
Initialize default travel_acceleration from EEPROM
...
When reading uninitialized memory, preset the travel acceleration to be
the same as the default acceleration.
2021-02-03 11:20:28 +01:00
1c76152e62
Implement separate travel acceleration (M204 T)
...
Allow to separate extrusion and travel acceleration settings using M204,
as Marlin 1.1.x and 2.x does using M204 T.
This allows to reduce the number of instructions required during
printing, since resetting the acceleration for travel moves is no longer
required and can be done a single time during the print.
Provision for this parameter was pre-existing, but not implemented.
M204 has two forms: the lagacy format (Marlin <1.1):
M204 S[print-acc] T[retract-acc]
and the newer format:
M204 P[print-acc] R[retract-acc] T[travel-acc]
The distinction in the MK3 FW is done based on the presence of the P
parameter. If P is seen, the new format is adoped. In the new format
however, M204 T was ignored until this change.
To keep backward compatibility, M204 S[acc] will set both print and
travel acceleration, which is identical in behavior to recent versions
of Marlin.
2021-02-03 11:20:28 +01:00
497637ee84
Remove hard-coded X/Y jerk limits
2020-02-18 12:23:42 +01:00
3b528196dd
Fixup prefix echomagic for the LA config report
2019-05-24 17:08:32 +02:00
eeea2725cb
Partial LA15 support
2019-05-24 17:08:32 +02:00
0f21ccee3c
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
2019-03-19 21:39:59 +00:00
ab5b57df11
Style.
2018-11-19 20:41:14 +01:00
cb7c701791
whitespace
2018-11-19 20:09:03 +01:00
7d538cde6c
Retrieve settings (M501): initialize each item in feedrate and acceleration arrays separately
2018-11-19 20:05:58 +01:00
9cae0c378a
Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules."
2018-10-08 20:24:56 +02:00
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
...
Known limitation: Unable to compile.
2018-10-08 15:58:49 +02:00
4151e19781
Remove attribute packed. It is not needed on 8-bit platform. Change of platform would be detected by static_assert (sizeof(M500_conf) == 188).
2018-09-25 16:27:20 +02:00
ccfcc6f989
Document.
2018-09-24 18:32:01 +02:00
3662f60f8f
if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values;
2018-09-24 18:13:20 +02:00
c38fef281d
Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore.
2018-09-24 17:33:58 +02:00
ca179a2d18
Use cs.filament_size from ConfigurationStore.
2018-09-24 17:29:02 +02:00
e225e9cab0
Use cs.volumetric_enabled from ConfigurationStore.
2018-09-24 17:12:16 +02:00
a201128b20
Use cs.retract_length, cs.retract_feedrate, cs.retract_zlift, cs.retract_recover_length and cs.retract_recover_feedrate from ConfigurationStore.
2018-09-24 17:10:25 +02:00
7e593e6922
Use cs.autoretract_enabled from ConfigurationStore.
2018-09-24 17:03:10 +02:00
20ba2b1c79
Use cs.bedKp, cs.bedKi and cs.bedKd from ConfigurationStore.
2018-09-24 16:57:48 +02:00
54bcc8aa52
Use cs.Kp, cs.Ki and cs.Kd from ConfigurationStore.
2018-09-24 16:54:50 +02:00
959d0069fa
Use cs.add_homing from ConfigurationStore.
2018-09-24 16:42:28 +02:00
ac7c062161
Use cs.max_jerk from ConfigurationStore.
2018-09-24 16:35:33 +02:00
bb66bfe6a7
Use cs.minsegmenttime from ConfigurationStore.
2018-09-24 16:22:50 +02:00
10428b30d9
Use cs.mintravelfeedrate from ConfigurationStore.
2018-09-24 16:01:58 +02:00
26e2fd1c76
Use cs.minimumfeedrate from ConfigurationStore.
2018-09-24 15:57:24 +02:00
b8fefceb4d
Use cs.retract_acceleration from ConfigurationStore.
2018-09-24 15:53:35 +02:00
7dbe0afdc4
Use cs.acceleration from ConfigurationStore.
2018-09-24 15:47:36 +02:00
cee51cf9c3
Use cs.max_acceleration_units_per_sq_second_normal from ConfigurationStore.
2018-09-24 15:40:35 +02:00
02becb5e6a
Use cs.max_feedrate_normal from ConfigurationStore.
2018-09-24 15:09:19 +02:00
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
2018-09-24 14:54:41 +02:00
d611cad087
Temporary hide M500_conf cs to allow automated renaming.
2018-09-24 14:42:01 +02:00
e94dc1341a
Use M500_conf cs in Config_ StoreSettings, RetrieveSettings and ResetDefault.
2018-09-24 14:34:43 +02:00
991db0e71d
Finish default_conf.
2018-09-23 23:36:01 +02:00
d9e2dcc736
Incomplete.
2018-09-23 22:21:28 +02:00
58af1ae4c4
Add configuration store struct.
2018-09-21 20:52:44 +02:00
e73f84279e
EEPROM offset fixed - added dummy lcd_contrast
2018-07-26 21:05:16 +02:00
5bc40aff85
Merge pull request #975 from XPila/MK3-new_lang
...
EEPROM dump (code D3)
2018-07-26 19:59:09 +02:00
f819b6b304
debug output from EEPROM_WRITE_VAR and EEPROM_READ_VAR
2018-07-26 19:43:33 +02:00
d51b2666ac
no levels used in store settings function
2018-07-26 19:09:52 +02:00
1232d2dae6
M503: print autoretract value fixed
2018-07-26 17:26:05 +02:00
612e83b473
max_feedrate and max_acceleration limitation (ConfigurationStore)
2018-07-21 12:33:29 +02:00
2ce210a8bb
TMC2130 feedrate and acceleration limitation - separate profiles for normal and stealth mode
2018-07-19 18:56:01 +02:00
268d2634f0
LCD menu optimalization - lcd and menu
...
removed unused code and conditional translation
2018-07-16 02:13:52 +02:00
f9f718e787
Config_PrintSettings fix
2018-07-12 23:50:41 +02:00
37f34a1ba3
Config_PrintSettings (M503) - printf optimized (~800 bytes flash saved)
2018-07-12 23:40:04 +02:00
fc3af0533a
Fix of calculate_extrusion_multipliers().
...
This is a fix of a bug made in the previous commit.
2018-03-05 21:31:31 +01:00
3d-gussner
Yuri D'Elia
Harpalyke
Marek Bel
PavelSindler
Robert Pelnar
PavelSindler
bubnikv