29159a5bf3
Merge pull request #3475 from gudnimg/custom_message_m601
...
Make M117 message persistent on LCD when used with M601 or G4
2022-07-04 09:42:23 +02:00
64f646a8a4
Add notices about Sheet::bed_temp and Sheet::pinda_temp being unused
...
There is a potential for 2*8 bytes of extra sparse eeprom space, plus a
few bytes saved if we remove the update calls, so add a notice that
these values are currently only written-to, but never actually used.
2022-05-11 11:15:36 +02:00
727060ddd8
Replace CustomMsg::MsgUpdate with CustomMsg::M117
...
MsgUpdate was only used with M117, renaming the message type to M117 may be more descriptive for current use case.
2022-04-17 15:01:48 +00:00
c77b768fdd
Make M117 custom message persistant if print is paused
...
If M117 is called before M601 then we would like the custom message to
be visible on the LCD screen until the print is resumed.
Change in memory: +10 bytes of flash
Fixes #3316
2022-04-17 14:00:41 +00:00
efde923e57
Purge ftostr3
...
Saves 54 bytes of Flash and 2 bytes of SRAM
2022-02-27 20:58:39 +01:00
8e85242c8f
Temperature selection is int16_t. Use sprintf for PID start command.
...
Saves 90B of flash and 2B of ram
2022-02-27 20:57:24 +01:00
6d98e99356
Use sprintf_P for M301 instead of ftostr32
...
Also fixed indentation of if statement
Saves 248 bytes of flash
2022-02-27 20:57:24 +01:00
0e6ff38b61
Optimise strcpy calls to use strcpy_P
...
Saves 24 bytes of SRAM
2022-02-27 20:57:24 +01:00
ce7cccab80
Merge pull request #3417 from leptun/MK3_temperature_busy_messages
...
Print busy messages while waiting for heaters
2022-02-25 12:03:23 +02:00
227b6b4b03
Fix FINDA timer
...
We want to set the FINDA state IF the timer has not expired.
It is helpful to see why by looking at the commit which broke
this 802b8860c8
2022-02-20 12:28:40 +00:00
0cc364ff7a
Print busy messages while waiting for heaters
2022-02-17 17:53:02 +01:00
159c9c34bd
Merge pull request #3089 from wavexx/show_axes_during_crash
...
Show affected axes in crash detection messages
2022-02-17 09:52:19 +01:00
9b6fca9214
Introduce lcd_show_yes_no_and_wait for future use
...
Split off yes/no lcd handling from
lcd_show_fullscreen_message_yes_no_and_wait_P into a separate function
in order to allow generic requests where the text prompt can change.
2022-02-16 14:17:56 +01:00
91797214b0
Update Eject and Cut to use for loop for menu items
...
Saves 134B of flash
2022-02-15 23:37:55 +01:00
2ec530c282
Do not hardcode the factory reset menu item count
2022-02-15 15:58:33 +01:00
a6331d22c8
Remove ancient SNMM code in the MK3 branch
2022-02-15 15:58:33 +01:00
775c460dc5
Merge branch 'MK3' into MK3_fix_usb_timer
2022-02-15 10:36:57 +01:00
9aa0b250ff
Merge pull request #3405 from wavexx/fixup_suspicious_indentation
...
Fixup suspicious indentation in lcd_show_sensors_state
2022-02-15 10:31:20 +01:00
2d9a154541
Merge pull request #3247 from gudnimg/remove-ifdef-gudni
...
Remove unused ifdef `MK1BP` and `MAX_SILENT_FEEDRATE`
2022-02-15 10:27:21 +01:00
73406f53e9
Merge pull request #3393 from gudnimg/add-menu-back-arrow-to-preheat-menu
...
Add menu back arrow to the Preheat menu
2022-02-15 08:49:07 +01:00
40881f52ad
Prettify lcd_show_sensors_state() v2
...
Allow to show the full precision of Xd/Yd by rearranging the layout
2022-02-14 23:30:08 +01:00
0c63e0e8df
Prettify MK3 sensor-info screen
2022-02-14 18:07:54 +01:00
d89f4e9952
Fix indentation in the MK3 sensor information screen
2022-02-14 17:59:47 +01:00
4ec8781df2
Fix usb print timer
2022-02-13 22:52:49 +01:00
bd3a835516
Optimise preheat menu's MENU_ITEM_BACK_P
...
Saves 10 bytes of flash memory
2022-02-12 14:17:11 +00:00
70ee06144e
Add menu back arrow to the Perheat menu
...
All other menus have this arrow on the back button.
2022-02-12 12:48:39 +00:00
4672b6444c
Merge branch 'MK3' into remove-eeprom-func
2022-02-11 19:32:11 +00:00
42b91a83cd
Merge branch 'MK3' into MK3_3.12_Optimizations
2022-02-10 10:36:31 +01:00
234add3c58
Merge branch 'MK3' into lcd-optimisation-gudni
2022-02-08 00:14:59 +01:00
121324d20b
Revert "Remove one space from Support -> Temperatures menu"
...
This reverts commit 158877e736
2022-02-08 00:09:09 +01:00
9c3c47ea29
Merge pull request #3253 from gudnimg/sd-sub-dir-fix
...
Fix edge case when SD card is inserted while user is inside the 'No SD card' submenu
2022-02-07 17:09:14 +01:00
0d4d386991
Merge pull request #3228 from gudnimg/remove-mmu_lcd
...
Remove a few redundant lines from ultralcd code
2022-02-07 17:04:34 +01:00
ff00988303
Revert "Replace hardcoded values and optimise strings"
...
This reverts commit e62bc4686f
2022-02-06 11:09:45 +01:00
c6ecc0dfc9
Merge branch 'prusa3d:MK3' into lcd-optimisation-gudni
2022-02-06 09:54:58 +00:00
d06e74dd6f
Fix Welcome message and language flashing
2022-02-05 23:44:24 +01:00
a22a7ea9d7
Change LCD_STR_UPLEVEL to LCD_STR_UPLEVEL[0] for consistency
...
Saves 4 bytes of flash and 2 bytes of SRAM (Arduino IDE 1.8.19)
2022-02-05 19:58:31 +00:00
d5b666d260
Add LCD_STR_SOLID_BLOCK to represent \xFF
2022-02-05 19:53:42 +00:00
e62bc4686f
Replace hardcoded values and optimise strings
...
This commit saves 64 bytes of flash memory on my end
2022-02-05 18:28:17 +00:00
21a0b53647
remove firstrun
2022-02-04 13:27:43 +01:00
6ce7792045
Remove "hh" in fmt where it makes no difference
2022-02-02 20:58:21 +01:00
146b008186
Remove redundant variable farm_status
...
It is unused and status_number variable can be used instead.
2022-02-02 18:37:55 +00:00
459570ab66
Change prusa_stat_printerstatus parameter to uint8_t
...
Also changes status_number global variable to uint8_t
Changes save 80 bytes of flash and 1 byte of SRAM (Arduino IDE 1.8.19)
2022-02-02 18:35:52 +00:00
e525bcb7f5
Optimise lcd_selftest_screen input parameters and return type
...
* _progress_scale is max 3 so it can be uint8_t
* _progress is max 6 so it can be uint8_t
* Change _delay type to uint16_t to be explicit
Changes save 102 bytes of flash memory (Arduino IDE 1.8.19)
2022-02-01 18:57:43 +00:00
9bf45773f9
Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2
2022-01-30 11:43:16 +00:00
f8847edca6
Remove one unused variable
...
Saves 1 byte of SRAM
The variable is only assigned a value but is never used.
2022-01-30 11:39:28 +00:00
b835f31904
Remove variable move_menu_scale
...
The variable is just set to 1.0 and is never modified, I also
removed the function lcd_move_menu_1mm()
Changes save 96 bytes of flash memory and 4 bytes of SRAM
2022-01-30 11:39:27 +00:00
a940c364c9
Create enum class for heating_status variable
2022-01-30 11:39:27 +00:00
2013295f94
Change farm_timer to uint8_t
...
Remove extern declaration of farm_timer and farm_status as they
are only used in one file.
Saves 26 bytes of flash
2022-01-30 11:39:26 +00:00
a687173e02
Change custom_message_state_old and custom_message_state to uint8_t
...
I see max value as 7*7+10 = 59
Saves 100 byte of flash and 1 byte of SRAM
2022-01-30 11:39:26 +00:00
60c9640602
Change heating_status_counter to uint8_t
...
It has a max value of 14
Saves 28 bytes of flash and 1 byte of SRAM
2022-01-30 11:39:26 +00:00
Alex Voinea
Yuri D'Elia
Guðni Már Gilbert
DRracer
3d-gussner