2e0034d915
Update Toggles and Translations
2019-11-17 09:53:14 +02:00
07b6173aaa
Merge branch 'MK3' into MK3-PFW-1024
2019-11-16 11:28:29 +02:00
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset
...
Show current Z offset in reset dialog before first layer calibration
2019-11-15 17:52:29 +01:00
460f6c3b5e
update message
2019-11-15 17:47:39 +01:00
715794d854
Merge pull request #2092 from leptun/MK3_Translations
...
PFW-1062: Mk3 Toggle and Translations
2019-11-15 16:53:17 +01:00
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display
...
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
2019-11-15 16:07:51 +01:00
f6c35c5d5f
Removed separate fix for #2089
...
Per PR fix request
2019-11-15 08:58:58 -05:00
8fae50ec79
Merge pull request #2315 from mkbel/finda
...
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
2019-11-15 12:53:01 +01:00
56251c4f99
Merge pull request #1937 from arons/MK3
...
added new function belt test under calibration menu
2019-11-15 09:39:42 +01:00
9e780f0b2b
remove ESC sequence
2019-11-15 09:26:56 +01:00
11428388c6
MBL toggle and cleanup
2019-11-09 20:58:56 +02:00
20a59f5f40
Temp cal.
2019-11-08 19:44:48 +02:00
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN
...
Fix short filenames scrolling in sdprint menu and status screen
2019-11-08 16:52:53 +01:00
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround
...
SD Scroll workaround
2019-11-08 16:48:38 +01:00
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function
...
Fix the LCD pause function
2019-11-08 14:55:13 +01:00
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
1de353dd09
Merge branch 'MK3' into MK3_Translations
2019-11-07 17:02:45 +02:00
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown
...
Enable print fan while waiting for cooldown
2019-11-04 16:52:26 +01:00
cd5ff783cf
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
76c39ce689
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
1e09f8c003
Wake on certain events
...
EEPROM DIM and BRIGHT values swapped!!!
2019-10-30 21:11:19 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
b2a1dc6786
Compile fix for firmware without LCD_BL_PIN
2019-10-11 19:23:38 +03:00
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
05e23d1468
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 23:08:11 +02:00
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z
...
Reset live z
2019-10-01 23:02:40 +02:00
74a1c9341b
Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset."
...
This reverts commit ca9ef3aba1
2019-10-01 22:57:59 +02:00
ca9ef3aba1
Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset.
2019-10-01 22:57:15 +02:00
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press
...
Knob long press fixes
2019-10-01 22:33:26 +02:00
087d3cb250
Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made.
2019-10-01 21:04:00 +02:00
aabf7655dc
Do all text formatting in first layer calibration reset dialog in one line.
2019-10-01 19:20:36 +02:00
7c3f397a62
Print sheet name and Z offset in first layer calibration reset dialog.
2019-10-01 18:22:12 +02:00
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
f3c3526aa5
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
9ae75612b5
Fixes after first feature tests
2019-10-01 15:31:01 +02:00
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
72aed3c544
Allow knob-long-press only in listed menus
2019-10-01 10:51:02 +02:00
Alex Voinea
DRracer
vintagepc
Marek Bel
Yuri D'Elia
Marek Běl
MRprusa3d