51d01ddd6f
Merge pull request #2133 from mkbel/fix_cmdqueue_debug
...
Fix cmdqueue_dump_to_serial.
2019-08-23 19:50:21 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
3eb36ca194
Fix cmdqueue_dump_to_serial.
...
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
2019-08-23 16:48:30 +02:00
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance
...
Improve performance of bed PWM automaton
2019-08-22 14:45:01 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
a278236a7e
Merge pull request #6 from 3d-gussner/3d-gussner-patch4
...
Updated LCD menu documentation to new form/syntax
2019-08-22 05:06:37 +02:00
d3123a74b0
Updated LCD menu documentation to new form/syntax
2019-08-22 04:58:16 +02:00
7a38a985d7
Merge pull request #2123 from mkbel/fix_disable_crash_detection
...
Fix disable crash detection
2019-08-21 15:48:52 +02:00
4fffc79425
Merge pull request #4 from DRracer/3d-gussner-patch-3
...
Added few German/French diacritical characters
2019-08-21 10:31:58 +02:00
0c76ed3ba2
Merge branch 'translations-doc' into 3d-gussner-patch-3
2019-08-21 10:31:12 +02:00
514b062107
Added `lcd_menu` format description
...
Added some documentation how the LCD menus look like and added max character values for translations.
There are more things needed and also the placement in the code is an open task. Depending on the decision if we use `messages.c/h`
2019-08-21 10:28:28 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
47e1311d64
Added few German/French diacritical characters
...
See
https://docs.oracle.com/cd/E29584_01/webhelp/mdex_basicDev/src/rbdv_chars_mapping.html
2019-08-21 09:30:11 +02:00
04903e22f0
Merge pull request #3 from DRracer/3d-gussner-patch-2
...
Added "All" argument and it is default in nothing is chosen
2019-08-21 09:27:09 +02:00
77630574fb
Merge pull request #2 from DRracer/3d-gussner-patch-1
...
Modified few things in the workflow and more
2019-08-21 09:25:48 +02:00
2d4535af1f
Added "All" argument and it is default in nothing is chosen
...
The script had to started for each language code translation.
Adding the "All" argument and make it as default if nothing is chosen makes the workflow easier.
2019-08-21 08:39:48 +02:00
2778e802b2
Modified few things in the workflow and more
2019-08-21 01:58:59 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal
...
Fix mmu lay1cal
2019-08-19 19:07:10 +02:00
d44a46b349
Merge pull request #2120 from mkbel/fix_power_panic_2
...
Fix power panic broken when PSU_Delta defined.
2019-08-19 19:06:15 +02:00
f0642f88f1
Fix power panic broken when PSU_Delta defined.
...
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
2019-08-19 17:37:23 +02:00
abe054531f
Merge branch 'translations-doc' of github.com:DRracer/Prusa-Firmware into translations-doc
2019-08-19 16:24:26 +02:00
05fe5b408c
_i and _T differences and usage scenarios
2019-08-19 16:24:09 +02:00
d7057ebb16
Add description for .loc_sec
2019-08-19 16:57:01 +03:00
7ad62bb6df
code usage documentation start
2019-08-19 15:43:08 +02:00
411b917891
Start of documentation of the translation process
2019-08-19 15:06:47 +02:00
e0acb23993
Fix N/A for German
2019-08-19 12:46:07 +03:00
0d22f8039e
Toggle FSENSOR and FSENSOR_AUTOLOAD
2019-08-19 11:58:16 +03:00
6e9c44af2d
Fix warning
2019-08-19 11:07:11 +03:00
5a3f14b752
"N/A" toggle support and format update
2019-08-19 10:20:17 +03:00
170c1ea866
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
2019-08-16 20:47:55 +02:00
e53734895f
Make MMU load failed blocking to workaround lack of resume print menu item.
...
The same workaround used as for USB print (Octoprint).
2019-08-16 20:20:17 +02:00
1036c4f755
Do not precede first layer calibration without filament if print is paused due to MMU load failed.
2019-08-16 19:00:45 +02:00
4c22ec234f
Merge pull request #2109 from mkbel/add_ASA
...
Add ASA preheat
2019-08-15 22:39:15 +02:00
b10bd8340a
Make local functions static.
2019-08-15 17:57:30 +02:00
0b798767af
Fix preheat ASA.
2019-08-15 17:54:23 +02:00
a6f955b62d
Use unused macros *_PREHEAT_FAN_SPEED.
2019-08-15 17:47:34 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
36a69281ee
Remove unused functions forward declarations.
2019-08-15 17:36:05 +02:00
2853b6a1c3
Merge pull request #2104 from prusa3d/MK3_3.8.0
...
Mk3 3.8.0
2019-08-15 10:39:28 +02:00
0e4e644476
Merge branch 'MK3' into MK3_3.8.0
2019-08-15 10:34:50 +02:00
9dc09ea8d6
Merge pull request #2103 from prusa3d/MK3_3.7.3
...
Mk3 3.7.3
2019-08-15 10:33:24 +02:00
ba81149afe
Merge branch 'MK3' into MK3_3.7.3
2019-08-15 10:25:51 +02:00
dc78bc7362
Improve performance of bed PWM automaton - proof of concept
...
There are still some artefacts on the output pin - work in progress.
2019-08-14 17:53:08 +02:00
32fa8caab8
reinitialize the timestamp to ensure enough time to receive response for 0xFF sent.
2019-08-11 17:57:41 -04:00
596ffe1dc2
Actual fix to the missing first two characters
2019-08-10 21:03:45 +03:00
7ce2fedac7
Fix missing first two characters in multi-lang mode
2019-08-10 09:16:23 +03:00
29dcb1cad3
Toggle FANS_CHECK
2019-08-10 08:43:07 +03:00
505deb28fd
Toggle menu item
2019-08-10 08:42:33 +03:00
Marek Běl
Marek Bel
XPila
DRracer
3d-gussner
D.R.racer
leptun
rhounsell