2fe946d58f
Fixed EEPROM space due to new features
2018-03-30 13:07:57 +02:00
fe862cb37b
Merge commit '66dc65ecd4e2b76273da54c64f9263dd08741dab' into MK3-private_build
...
Merge Prusa MK3 firmware 3.1.3 with Hyperfine Bed Leveling and P.I.N.D.A.v2 fix by TheZeroBeast
2018-03-30 12:31:12 +02:00
66dc65ecd4
version changed
2018-03-09 14:15:47 +01:00
d512c9c9c2
version changed
2018-03-08 14:48:01 +01:00
57adeabb96
Merge branch 'MK3' into MK3-private_build
2018-03-02 17:58:47 +01:00
1f2c4fc5ad
version changed
2018-03-01 15:52:53 +01:00
e2b835b881
version change
2018-02-23 17:53:15 +01:00
ba49c21f17
Unified the volumetric_multiplier with extrusion_multiply to improve
...
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.
Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-21 11:25:21 +01:00
79caf3d9c6
tmc2130 optimalization, accurate homing and microstep linearity correction
...
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
2018-02-15 04:17:58 +01:00
619d4f0cc9
Merge branch 'MK3' into MK3-private_build
2018-02-05 18:19:18 +01:00
33aa3d5e7d
commint nr
2018-02-05 16:56:31 +01:00
2dca6efa94
Merge branch 'MK3' into MK3-private_build
...
Fixed merging
2018-02-03 07:37:14 +01:00
e3b4015ddc
Merge branch 'MK3-Hyperfine' into MK3-private_build
...
Fixed merging
2018-02-03 07:33:34 +01:00
36536044f4
version changed
2018-02-02 17:48:02 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
511d5d7e82
Merge remote-tracking branch 'upstream/MK3' into MK3-Hyperfine
2018-01-25 12:49:34 +01:00
f4073120ef
-m Added Encoder Fix changes
2018-01-25 06:49:28 +10:00
a2e0a0a02d
Hyperfine Bed Tuning for MK3
...
Changed Bed correction from 4 points to 8 to get better results as we got on the MK2/s
Changed langtool.pl to have EN as default
Added tiem and credentials to support info
2018-01-24 09:45:23 +01:00
cae68d9f6d
Extruder resolution changed to 32usteps
...
build 151
2018-01-24 01:41:42 +01:00
69f97e0ec3
Separated the "Unknown" build from the "Development" build.
...
Documented purpose of the various build types.
2018-01-22 17:41:05 +01:00
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version
...
initial message for debugging fw version
2018-01-18 13:18:16 +01:00
e60cb2a79e
unload filament sequence same as in M600
2018-01-17 21:54:34 +01:00
4843f2c48e
initial message not shown on release candidate versions
2018-01-17 17:38:34 +01:00
bfa675c1a4
initial message for debugging fw version
2018-01-17 16:00:19 +01:00
36e4e39c85
3.1.1-RC5 build 148
2018-01-16 19:25:09 +01:00
6b5f9253d6
build 147
2018-01-16 16:50:05 +01:00
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
9aedaa8fe7
build 146
...
hard limits
fsensor overflow fix
2018-01-14 23:59:43 +01:00
552b1f03b1
build 145
...
fixed - finishstatus declaration
2018-01-13 19:16:09 +01:00
a4be2af538
commit nr updated
2018-01-11 17:51:30 +01:00
cfae8f859d
Merge branch 'MK3' into fw_versions
2018-01-11 16:58:47 +01:00
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
43010b30b4
Build 143f
...
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
2018-01-09 19:54:07 +01:00
0a2087c1cb
build 143e
...
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
2018-01-04 18:08:22 +01:00
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
c6e77f55f6
checkrx in stepper returned back
...
build 143a
2017-12-30 02:55:22 +01:00
568f03c46e
build 143
2017-12-29 23:49:11 +01:00
8d1f2afbf2
build number change
...
just 141r -> 142
2017-12-29 20:22:45 +01:00
0920b62d80
build number change
2017-12-29 20:21:06 +01:00
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
f71f133e80
power panic polished
...
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
2017-12-28 23:26:06 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
bd58718d9d
dummy "ok" response
...
build 139 (RC4)
2017-12-28 02:45:05 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
23ed33fc21
disable crashdetection while usb printing
2017-12-23 03:42:19 +01:00
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
3d-gussner
Robert Pelnar
PavelSindler
bubnikv
PavelSindler
TheZeroBeast
Michal Průša