30ec4e8b53
Inital Temp Model cal wizard
2022-11-17 15:19:35 +01:00
2096accc5f
Remove unused gcode level check code
...
This code was introduced with v3.8.0 but was always disabled.
I propose the code be removed since it has not been enabled
for 3 years since its introduction.
2022-11-17 08:05:27 +01:00
6059398004
Introduce MMU Error: INSPECT_FINDA (FINDA_FLICKERS)
2022-11-17 07:58:11 +01:00
29882b625b
Remove LcdCommands::FarmModeConfirm
2022-11-17 05:46:33 +01:00
e11ef11a64
PFW-1425 Rename "Load to Extruder" to "Loading Test"
2022-11-16 06:00:15 +01:00
7b43f322de
PFW-1425 Move Reset MMU setting
2022-11-15 17:32:27 +01:00
b4920d7fa8
PFW-1425 use mmu2.Enabled instead of EEPROM read
2022-11-15 17:32:27 +01:00
3f4ac254ab
PFW-1425 Move MMU settings under a common if statement
...
We only need to check if the MMU is enabled once,
no need to do it in every submenu.
This way we save little bit of flash memory.
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2022-11-15 17:32:27 +01:00
8f3f071fd4
PFW-1425 Move Load to Extruder menu to Settings menu
...
No change in memory footprint
2022-11-15 17:32:27 +01:00
5239f1c176
cleanup: remove old extern for mmu_print_saved
2022-11-15 09:44:02 +01:00
4f58812478
optimise lcd_sdcard_menu with lcd_print_pad
...
Change in memory:
Flash: -46 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
184e19dd60
further optimise lcdui_print_status_line
...
We can use lcd_print_pad to determine
whether the end of the file name was reached
lcd_print_pad now returns the last character pointed to.
If the end of the string was reached, it will be the null delimeter which
evaluates to "false" in an if statment (same as NULL).
Else "true" means the end of the string was not reached.
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
0af7ef0201
optimisation: reduce code size in showing file name being printed
...
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
a2bbc4f585
Merge pull request #3745 from leptun/MK2.5_XYZ_Cal_fixes
...
MK2.5 XYZ calibration fixes
2022-11-12 21:48:16 +01:00
006fe110cc
Don't raise MMU error screen until retry is done
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-12 18:47:10 +01:00
68bd7f9b19
Fix excessive flash usage.
2022-11-12 18:47:10 +01:00
ecef69012a
Fix PFW-1364 & possible comms timeout during reheat
2022-11-12 18:47:10 +01:00
661b3a83ff
MK2.5: fix swapped yes/no messaged for Z manual alignment
2022-11-10 22:20:46 +01:00
1cdc2e712b
MK2.5: unblock planner after plan_abort_hard()
2022-11-10 22:20:01 +01:00
fd832f9ccf
Merge pull request #3737 from gudnimg/fix-longpress-inactivity-timeout
...
Fix long-press LCD inactivity timeout
2022-11-08 14:10:57 +01:00
76a164e651
fixup
2022-11-08 13:49:40 +01:00
08460bd403
PFW-1397 Drop ON_MENU_ENTER
...
Using _menu_data_t turns out to save *just* a little bit more flash. So for now just use it.
2022-11-08 13:49:40 +01:00
390f69a82f
PFW-1397 Fix: ON_MENU_ENTER was always run
2022-11-08 13:49:40 +01:00
59a452ac27
PFW-1397 minor comment tweaks
2022-11-08 13:49:40 +01:00
f160f5594d
PFW-1397 cleanup statistics menu
...
Change in memory:
Flash: -18 bytes
SRAM: -1 byte
2022-11-08 13:49:40 +01:00
82bd9db1d6
PFW-1397 Implement ON_MENU_ENTER to simplify code
...
ON_MENU_ENTER runs code within the brackets only once
after a new menu is entered.
For the tool change menu, this allows us to display the data and
read from EEPROM only once.
2022-11-08 13:49:40 +01:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
3120bf0aa2
PFW-1397 Implement new function increment_tool_change_counter()
...
Reduces flash consumption by 44 bytes
2022-11-08 13:49:40 +01:00
fcfb868167
PFW-1397 Add a temporary menu item to show the statistic
...
The location of the menu has not been decided. Currently I placed it where convenient.
2022-11-08 13:49:40 +01:00
5a60a85467
PFW-1397 Increment toolchange statistic
2022-11-08 13:49:40 +01:00
0af7d28074
PFW-1397 Allocate EEPROM memory for toolchange counter
2022-11-08 13:49:40 +01:00
7fe22e8f79
Fix long-press LCD inactivity timeout
...
Fixes #3715
When a long-press is triggered, the LCD inactivity timer
needs to be restarted. This is done with lcd_timeoutToStatus.start()
This also fixes situations where a long-press is triggered, and the timer
times out immediately (because it was not reset properly)
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-06 13:43:14 +00:00
853adbf411
Bump up build number
...
+1 for commit
+1 for merge
2022-11-04 11:16:07 +01:00
7c009cadb8
Bump up Revision to ALPHA1 6051
...
Temporary fix for MSG_BTN_MORE
pre-release pot and po update
2022-11-04 10:21:39 +01:00
7b20f8c6f3
Merge pull request #3717 from 3d-gussner/MK3_Temp_Model_menu
...
Add Menu `Calibration -> Temp. model cal`
2022-11-03 12:12:55 +01:00
1e0909d50c
Disable `Error:` messages for MMU2 errors
2022-11-03 12:09:03 +01:00
8543942acb
Fix Z-leveling
2022-11-03 06:22:57 +01:00
fd6da0e766
Fix typo
...
Add lcd_setatatus_serial to output lcd status message and serial at the same time
2022-11-02 10:09:32 +01:00
7bc7f21fa5
mmu: move RetryIfPossible outside the error screen
...
This fixes issue where 'retryAttempts=3' may be spammed in the logs
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-11-01 06:22:39 +01:00
2ac2cd2255
Fix MK25/S builds
2022-10-26 14:27:22 +02:00
072b3f8300
Temp Model cal. menu
2022-10-26 13:34:27 +02:00
f4a2c1c794
Update translations
...
Fix button msg
Update Dutch `F. jam detect`
2022-10-25 10:29:35 +02:00
45c72d48ed
optimisation: use failstats_reset_print in factory_reset_stats
...
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
2022-10-23 09:58:56 +00:00
edc5d013dd
Merge pull request #3698 from leptun/farm_presort_cache
...
Farm mode: cache filenames in the presort function
2022-10-21 15:43:49 +02:00
b792d47350
Merge pull request #3694 from 3d-gussner/MK3_Hotend_fan
...
PFW-1415: Rename `Extruder fan` to `Hotend fan`
2022-10-19 08:47:15 +02:00
b485992c9e
If in farm mode, force the sorting direction to be reversed
...
So in an ideal scenario, the newest file is first. This of course breaks as soon as a file is deleted/renamed/moved, but it should at least be fixed now compared to before where the direction could be influenced by a disabled setting
2022-10-18 17:29:31 +02:00
798f215f88
Refactor SD menu settings
2022-10-18 17:24:35 +02:00
eaaf1d6872
Rename Sheets
...
- `Satin 1` to `Satin `
- `Satin 2` to `NylonPA`
2022-10-18 10:20:01 +02:00
e18bfce597
Farm mode: cache filenames in the presort function
2022-10-17 20:17:28 +02:00
e83728f72c
Change fan RPM display to 5 digits
...
All credits to @ WarrenSchultz for initial PR https://github.com/prusa3d/Prusa-Firmware/pull/3656
2022-10-17 15:41:05 +02:00
3d-gussner
Guðni Már Gilbert
D.R.racer
Alex Voinea
VintagePC
DRracer