42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
1de353dd09
Merge branch 'MK3' into MK3_Translations
2019-11-07 17:02:45 +02:00
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown
...
Enable print fan while waiting for cooldown
2019-11-04 16:52:26 +01:00
cd5ff783cf
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
76c39ce689
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
1e09f8c003
Wake on certain events
...
EEPROM DIM and BRIGHT values swapped!!!
2019-10-30 21:11:19 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
b2a1dc6786
Compile fix for firmware without LCD_BL_PIN
2019-10-11 19:23:38 +03:00
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
05e23d1468
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 23:08:11 +02:00
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z
...
Reset live z
2019-10-01 23:02:40 +02:00
74a1c9341b
Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset."
...
This reverts commit ca9ef3aba1
2019-10-01 22:57:59 +02:00
ca9ef3aba1
Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset.
2019-10-01 22:57:15 +02:00
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press
...
Knob long press fixes
2019-10-01 22:33:26 +02:00
087d3cb250
Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made.
2019-10-01 21:04:00 +02:00
aabf7655dc
Do all text formatting in first layer calibration reset dialog in one line.
2019-10-01 19:20:36 +02:00
7c3f397a62
Print sheet name and Z offset in first layer calibration reset dialog.
2019-10-01 18:22:12 +02:00
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
f3c3526aa5
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
9ae75612b5
Fixes after first feature tests
2019-10-01 15:31:01 +02:00
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
72aed3c544
Allow knob-long-press only in listed menus
2019-10-01 10:51:02 +02:00
543ad6eb41
Ask to reset Z offset before first layer calibration.
2019-09-30 19:58:09 +02:00
9d57f9c365
Fix fan_error_selftest() mistake
2019-09-30 20:30:09 +03:00
61c7479579
Code cleanup: Move texts to messages.c/h
2019-09-30 20:16:01 +03:00
30f325c81d
Extract fan_error_selftest to function for readability
2019-09-30 20:01:31 +03:00
aba9d1c360
Merge branch 'MK3' into MM_lay1_cal
2019-09-30 18:13:57 +02:00
dfd3f34351
Check for minimum fan speed. Should be achievable by both fans in 1s.
2019-09-25 22:35:35 +03:00
532d1fc4ae
Fix "Resume Print" missing when doing a normal pause
2019-09-25 18:32:35 +03:00
c3b7b5ebb5
Check fans before resuming
2019-09-25 15:58:07 +03:00
3c17f7e145
No need to check the fan in the menu
2019-09-22 14:04:58 +03:00
2363f19a62
Minor tweaks for usb printing
2019-09-20 21:07:20 +03:00
139c37c744
allow only one string translation constraint defintion per line
2019-09-20 13:01:07 +02:00
fd01942db8
FAN Error fix - Initial
2019-09-19 20:48:59 +03:00
2afeb65811
return failStatsFmt that fell out in merge
2019-09-19 18:39:25 +02:00
f50cef8361
Merge remote-tracking branch 'upstream/MK3' into translations-doc
...
and resolve ultralcd.cpp conflicts
2019-09-19 18:10:20 +02:00
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes
...
dialogs' layouts fixes + FR polished
2019-09-19 16:33:26 +02:00
17cca89993
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-18 15:17:28 +02:00
e7273ea505
Fix [French translation] Wrong display during mesh bed calibration #2218
...
minor code/doc improvements
2019-09-18 12:49:44 +02:00
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy
...
Mk3 miniopravy
2019-09-18 11:34:17 +02:00
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
966d9baf2b
Document.
2019-09-17 19:00:03 +02:00
b660cb3908
ultralcd.cpp
2019-09-17 11:46:29 +02:00
77c4720c8b
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-17 11:32:27 +02:00
b4e0c2f455
Update ultralcd.cpp
...
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
2019-09-17 10:51:43 +02:00
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
e1cfd6dc4f
Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard.
2019-09-16 18:48:52 +02:00
ff4450489b
Document.
2019-09-16 18:38:44 +02:00
002a7d31a4
Make lcd_wizard() more debug friendly.
2019-09-16 18:31:12 +02:00
b99038736c
Use eeprom_update_byte instead of eeprom_write_byte
2019-09-16 18:22:34 +02:00
d491a9801d
Update ultralcd.cpp
2019-09-16 16:04:45 +02:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
015b34de05
Alert user in wizard about more sheets presets.
2019-09-13 17:09:11 +02:00
4423106fad
dialogs' layouts fixes (support menu dlgs, statistics etc.)
...
French translation polished
2019-09-13 16:55:05 +02:00
e754780717
Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status().
2019-09-13 00:19:37 +02:00
f1d190d2d5
Do not ask same filament related question twice if starting first layer calibration from wizard.
2019-09-12 23:41:42 +02:00
ebf405d589
Preselect "yes" for filament question in first layer calibration wizard.
2019-09-12 23:20:03 +02:00
d256c18635
Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed.
2019-09-12 23:17:19 +02:00
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
07a0f527d8
Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out.
2019-09-12 20:30:27 +02:00
6630591f9e
Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P().
...
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
2019-09-12 20:20:33 +02:00
d48197656c
Fix lcd_v2_calibration menu not redrawn after full screen message or question.
2019-09-12 20:05:16 +02:00
770e470fd5
Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory.
2019-09-12 18:53:24 +02:00
d80b8280a0
Remove commented out and unused functions prototypes.
2019-09-12 18:41:17 +02:00
3a541488b2
Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu.
2019-09-12 18:40:02 +02:00
0cdfa7a5e8
Remove dead code.
2019-09-12 18:33:02 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
c26d7e50f7
Remove redundant lcd_update_enable(true) call.
2019-09-12 18:07:46 +02:00
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
ae839aee31
Merge branch 'MK3' into MK3_Translations
2019-09-12 16:28:36 +03:00
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
ae3e6530e6
Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor.
2019-09-12 00:14:24 +02:00
bf9f668574
Fix short filenames scrolling in sdprint menu and status screen
2019-09-11 22:04:48 +03:00
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress
...
Default to "Live Adjust Z" when longpressing during a print (closes #1604 )
2019-09-10 14:13:00 +02:00
d51b3d6207
Added doxygen todos for missing LCD layout and positioning
2019-09-01 09:51:51 +02:00
339771a5fb
Fixed info screen when selected_sheet hasn't been initialized.
2019-08-31 21:27:08 -04:00
10cdcb3ae3
SD Scroll workaround
2019-08-31 17:00:39 +03:00
795b1d1cf7
Toggle Sound
2019-08-31 16:56:14 +03:00
2345288d40
Fix the LCD pause function
...
Do not call long_pause recursively!
long_pause() is called before resetting the lcd_command_type. As
long_pause uses st_synchronize() internally, there could be time to
schedule another call to long_pause().
2019-08-31 15:28:31 +02:00
3c4fffef60
Merge branch 'MK3' into MK3_Translations
2019-08-31 15:30:51 +03:00
a5a5f5cf0b
Toggle RPi port
...
Probably works, needs to be tested.
2019-08-31 15:25:00 +03:00
f69035323a
Toggle SD Settings
...
This includes FlashAir support and SD Sorting type
2019-08-31 14:55:51 +03:00
a821002f02
Toggle MMU Mode
2019-08-31 07:38:40 +03:00
d347a36509
Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware into MK3-2093-sheet-display
2019-08-30 19:17:27 -04:00
DRracer
Alex Voinea
Marek Bel
Yuri D'Elia
Marek Běl
MRprusa3d
D.R.racer
michalrudolf
MRprusa3d
3d-gussner
vintagepc