33a7723fba
Merge pull request #533 from bubnikv/M221_fix
...
Fix of a regression bug, caused by pre-calculating the extrudemultiply
2018-03-07 16:03:50 +01:00
fb4230f80d
Fix of a regression bug, caused by pre-calculating the extrudemultiply
...
for precission and performance: calculate_extruder_multipliers()
has to be called after extrudemultiply is changed from the printer panel.
2018-03-07 15:46:46 +01:00
7164e66e4d
Remove Rpi port menu item for MK25.
2018-03-05 17:14:20 +01:00
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
2018-02-27 17:52:13 +01:00
73b0349898
fix - Z movement speed in selftest
...
conditional translation for linearity correction and variable resolution
2018-02-23 16:31:24 +01:00
06da2bb915
Accurate homing, fix - enabled after selftest.
...
Experimantal menu - conditional translation.
2018-02-22 20:50:34 +01:00
66161062cf
Homing accuracy calibration in selftest.
2018-02-20 19:02:55 +01:00
dff8c29362
Microstep linearity correction, optimized wave compression.
...
Correction factor can be adjusted from 0.9 to 1.25 by 0.005 steps.
2018-02-17 19:58:40 +01:00
79caf3d9c6
tmc2130 optimalization, accurate homing and microstep linearity correction
...
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
2018-02-15 04:17:58 +01:00
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
cbcfcee48f
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume
...
SD card long pause update
2018-01-24 00:12:33 +01:00
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update
...
Preheat temperatures update
2018-01-24 00:11:59 +01:00
64a709c097
removed temporary debuging code
2018-01-23 19:14:52 +01:00
05e0abbd9d
startFileprint delayed
2018-01-23 19:11:04 +01:00
c38458eb67
init
2018-01-23 16:21:43 +01:00
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking
...
Mk3 stepper blocking
2018-01-23 13:15:59 +01:00
188116cb7e
Preheat temperatures update
2018-01-22 16:03:43 +01:00
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
...
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
2018-01-20 15:39:21 +01:00
7edce0b890
Only show the debug menu in the DEBUG_BUILD.
2018-01-18 16:43:40 +01:00
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
552b1f03b1
build 145
...
fixed - finishstatus declaration
2018-01-13 19:16:09 +01:00
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
530dfba417
Status message limit (PFW-124)
2018-01-12 21:21:21 +01:00
3e6d853364
Debugging of the stepper timer routine. When enabled through
...
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
2018-01-12 20:51:14 +01:00
0f46fa0c37
blocking messages in settings/tune menu (PFW104)
...
switch normal/stealth (PFW110)
2018-01-12 19:54:32 +01:00
f5ed12817d
Merge pull request #388 from PavelSindler/first_layer_saving
...
Live adjust Z saving using timeout
2018-01-11 17:49:40 +01:00
97bd56d560
Merge pull request #386 from PavelSindler/selftest_swapped_fans
...
manual check for swapped fans
2018-01-11 17:45:23 +01:00
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
cc20da62a8
whitespace
2018-01-10 23:31:06 +01:00
c185b46eb2
live adjust Z saving using timeout
2018-01-10 23:28:41 +01:00
c79d960cb5
manual check for swapped fans
2018-01-10 16:40:06 +01:00
b53197fdd1
Fixed error messages for print fan and extruder fan (were swapped)
2018-01-08 12:07:45 +01:00
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
69d496e157
autoload filament menu (PFW-95, PFW-96)
2017-12-27 21:57:51 +01:00
cbd7f033e8
crashdetection and mode menu (PFW-85, PFW-97)
2017-12-27 21:43:04 +01:00
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
7f05b9fd44
changed menu order (PFW 91)
2017-12-22 20:31:45 +01:00
6abba7bfe9
filament autoload - better detection algorithm, autoload in M600 from menu
...
unload menu always visible
2017-12-22 20:14:26 +01:00
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
PavelSindler
bubnikv
Marek Bel
PavelSindler
Robert Pelnar
Michal Průša