9c3e0aab36
M861 update: use signed values
2018-04-26 18:55:08 +02:00
d50dd9a6e9
XYZcal - findpointcenter starting Z coordinate down by 50um
2018-04-26 18:41:56 +02:00
ab68221976
Always show XYZ cal. details menu.
2018-04-26 16:36:03 +02:00
1a80fc28e8
Add zero point offset information support menu.
...
Note: XYZ menu is shown only if not printing and printer must me homed to show non-zero value.
2018-04-26 16:36:03 +02:00
b6888470cf
Save 42 bytes of flash by removing duplicate string "--------------------".
2018-04-26 16:36:02 +02:00
c1dd269a92
Fix missing degree symbol after returning to status screen. Those lcd_set_custom_characters* calls were redundant.
2018-04-26 16:36:02 +02:00
d6aa149cfa
Conserve 58 bytes of flash by returning by reference.
2018-04-26 16:36:02 +02:00
ae08788c99
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
2018-04-26 16:36:02 +02:00
2657d3febd
MK25: SILENT_MODE_NORMAL changed to SILENT_MODE_POWER
2018-04-26 15:12:45 +02:00
14cf4abb64
Merge pull request #668 from XPila/MK3-V3_2
...
Timer in autoloadmenu - dirty hack (unable to compile under 4.8.1)
2018-04-26 14:53:49 +02:00
84a53370d3
temporary change in MK3 variants file: disable forced selftest
2018-04-26 14:50:16 +02:00
f64d266c89
Timer in autoloadmenu - dirty hack (unable to compile under 4.8.1)
2018-04-26 14:50:01 +02:00
4681361883
correction in M27 message
2018-04-26 11:50:48 +02:00
9a6cc8a035
Merge pull request #664 from MRprusa3d/MK3
...
Mk3
2018-04-25 22:20:45 +02:00
cf0c83a6c1
M27 fix
2018-04-25 21:23:38 +02:00
7e462b3224
Merge branch 'MK3' into MK3
2018-04-25 19:15:36 +00:00
2f49574822
Add files via upload
2018-04-25 18:48:15 +00:00
0b6644915a
Add files via upload
2018-04-25 18:47:19 +00:00
d85a8077a8
M115 update
2018-04-25 20:39:10 +02:00
e7ad81e159
Merge pull request #660 from mkbel/fix_z_home_point
...
Update documentation of mesh_bed_calibration.cpp.
2018-04-25 17:27:22 +02:00
d2736fdacf
Merge pull request #662 from mkbel/fix_return_autoload
...
Return from Autoload filament and Load filament menu item to parent m…
2018-04-25 17:26:56 +02:00
f207145752
Return from Autoload filament and Load filament menu item to parent menu.
...
Exception is Load filament, when temperature is sufficient to load filament, in such case, load filament is started and GUI returns to status screen.
2018-04-25 16:51:35 +02:00
0271ab3643
Meshbedleveling, calibration Z
...
check crash Z (MK3)
check deviation of Z-probe (>50um == error, all printers)
kill with message "debris on nozzle..."
2018-04-25 16:19:16 +02:00
5f12289339
CalibrationZ/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-25 14:43:32 +02:00
3abfeb831f
Update documentation of mesh_bed_calibration.cpp.
2018-04-25 12:21:20 +02:00
5bb9451b5d
Merge pull request #658 from XPila/MK3-V3_2
...
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message…
2018-04-24 20:54:53 +02:00
1553e99d8e
Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")
2018-04-24 20:12:29 +02:00
5a9cc39562
Merge pull request #654 from XPila/MK3-V3_2
...
New current setting for MK3
2018-04-24 17:10:19 +02:00
f9d64bdfb1
Merge pull request #655 from mkbel/fix_z_home_point
...
Fix z home point
2018-04-24 16:51:57 +02:00
79b9f736aa
Merge pull request #657 from PavelSindler/temp_cal_update
...
Temp calibration update
2018-04-24 15:16:13 +02:00
8efe66ef99
remove tab
2018-04-24 14:34:49 +02:00
ffe93b2ca9
whitespace correction
2018-04-24 14:33:48 +02:00
cc74edfa13
whitespace
2018-04-24 14:23:52 +02:00
010ceceff9
add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails
2018-04-24 13:43:51 +02:00
468645e92e
Set DEFAULT_Y_OFFSET to 4 mm for MK3 printer.
2018-04-23 20:34:04 +02:00
37ebe5c35d
Move default correction matrix of not calibrated printer to world2machine_default() function. Use world2machine_reset() to uncorrected matrix. Call it from world2machine_revert_to_uncorrected() and from world2machine_default() if there is no default shift to remove code duplication.
2018-04-23 20:33:39 +02:00
9bd4d580d7
Use right calibration point. This change is only formal, as both original and new point have same coordinates.
2018-04-23 20:33:25 +02:00
cccd8246ab
Fix world2machine(const float &x, const float &y, float &out_x, float &out_y) not using input parameters if only WORLD2MACHINE_CORRECTION_SHIFT is applied.
2018-04-23 20:33:14 +02:00
864284f043
New current setting for MK3
...
X, Y: no change
Z: +26.1%
E: -28.5%
2018-04-23 20:17:45 +02:00
2467b19dd2
Merge pull request #647 from XPila/MK3-V3_2
...
XYZ cal fix (better histogram processing)
2018-04-23 14:54:23 +02:00
82b31e8552
Set [0;0] point offset for uncalibrated printer.
2018-04-20 15:01:11 +02:00
65aa62ebab
XYZ cal fix (better histogram processing)
2018-04-20 13:17:18 +02:00
043c8c66be
waiting for pinda probe cooling
2018-04-19 16:55:00 +02:00
31ae097dba
mesh bed leveling / auto home Y coordinates updated
2018-04-18 17:09:12 +02:00
5791d9f0d8
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
2018-04-18 14:17:28 +02:00
cf99808aef
Merge pull request #624 from mkbel/update_version
...
Update version.
2018-04-13 19:55:21 +02:00
af6c1f8acb
Update version.
2018-04-13 19:53:51 +02:00
b90e8999df
Merge pull request #623 from mkbel/fix_safety_timer
...
Fix safety timer.
2018-04-13 19:43:36 +02:00
c88f0108af
Fix safety timer.
...
Constant parameter greater than 16 bits must by stated as unsigned long.
2018-04-13 19:30:08 +02:00
c5af3aaaf2
Merge pull request #622 from mkbel/fix_menu_return_fail_stats
...
Fix returning from Fail stats menu.
2018-04-13 18:35:03 +02:00
6f985d23d6
Fix returning from Fail stats menu.
2018-04-13 17:20:30 +02:00
03d03aeac4
Return to main menu from filament unloading.
2018-04-13 16:51:47 +02:00
e4a4c88be9
Merge pull request #615 from PavelSindler/selftest_MK25_fix
...
selftest for MK2.5: fan error fix
2018-04-13 13:59:15 +02:00
f3209e1aec
fixed possible feedmultiply change cause by entering main menu with negative encoder position
2018-04-13 10:27:55 +02:00
b1bb6841c9
Merge pull request #617 from mkbel/fix_farm_reset_1
...
Fix farm reset
2018-04-13 10:02:54 +02:00
5f3fed33cf
Merge pull request #613 from MRprusa3d/MK3
...
Add files via upload
2018-04-13 10:02:44 +02:00
388d6eea36
Fix printer resets in farm mode if command "PRUSA SN" is received and 32U2 processor is not responding.
2018-04-12 18:44:33 +02:00
08740356b8
Move "PRUSA SN" gcode to separate function.
2018-04-12 18:41:11 +02:00
591cb881cc
selftest: false fan error fix, added message in case that manual fan error fails
2018-04-12 18:24:30 +02:00
d09f190c2b
Add files via upload
2018-04-11 18:48:50 +00:00
78245ce566
farm preheat temperature for heatbed
2018-04-11 18:54:27 +02:00
e150d502ac
removed configuration_prusa
2018-04-11 18:49:42 +02:00
53d903e600
Merge pull request #610 from MRprusa3d/MK3
...
Add files via upload
2018-04-11 18:46:18 +02:00
6b5835fd9f
Merge pull request #612 from PavelSindler/M861_gcode
...
M861 gcode, temp cal is automaticly activated after calibration process
2018-04-11 18:45:57 +02:00
45d1dbbfe0
temp cal. active set to false
2018-04-11 18:37:07 +02:00
ce66699340
dont use default temp table for new printers and dont automaticly activate temp. cal. (new pinda probes have different characteristics)
2018-04-11 18:36:38 +02:00
52de4891fe
typo fixed
2018-04-11 18:32:27 +02:00
47eab97d2d
temp. calibration is automaticly activated after calibration process
2018-04-11 18:16:16 +02:00
0ba7850146
pinda temp table changed back
2018-04-11 17:40:04 +02:00
c69524c3fb
Merge pull request #611 from XPila/MK3-V3_2
...
removed Configuration_prusa.h
2018-04-11 17:33:37 +02:00
89efcb84b1
removed Configuration_prusa.h
...
fixed - compilation for MK25
2018-04-11 17:32:31 +02:00
919fba531a
wait for PINDA gcode changed
2018-04-11 16:48:47 +02:00
c8f1c55ec0
Add files via upload
2018-04-11 14:41:41 +00:00
f70685a92d
Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE
...
MK3 Add Gcode to wait for minimum PINDA temp
2018-04-11 16:40:21 +02:00
1e1531a4f8
Merge pull request #608 from MRprusa3d/MK3
...
Mk3
2018-04-11 16:37:34 +02:00
8da2330b93
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
...
ultralcd_implementation_hitachi - fixed link
2018-04-11 16:03:54 +02:00
716f1c63bf
Add files via upload
2018-04-10 18:08:57 +00:00
6b77e68924
Add files via upload
2018-04-10 18:07:08 +00:00
02fda70529
farm mode: preheat menu updated
2018-04-10 14:07:44 +02:00
da43aa0250
XYZ calibration tunning
2018-04-04 20:03:39 +02:00
3b26e1635a
XYZcal - better filtering.
2018-04-03 20:10:50 +02:00
630041ecb2
XYZcal - threshold changed from 32 to 16
2018-04-03 18:49:15 +02:00
339d2ebdef
Z-axis stealth mode
...
XYZcal fix
2018-04-03 18:26:39 +02:00
869a99d8ad
XYZ calibration - diagonal find_point_center
2018-04-03 15:05:57 +02:00
92997204a1
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
2018-04-03 12:30:35 +02:00
baade7db61
Removed unused files (ST7565R-dogm, digipot)
...
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
2018-03-29 23:01:13 +02:00
dba2fd7e75
Merge pull request #589 from XPila/MK3-V3_2
...
New SPI, LiquidCrystal renamed
2018-03-29 18:20:29 +02:00
363a9d24b3
LiquidCrystal class renamed to LiquidCrystal_Prusa
2018-03-29 17:50:43 +02:00
186e630299
New SPI (do not use Arduino SPI class)
...
saved ~300bytes flash, 4bytes ram
2018-03-29 17:42:41 +02:00
cedb30303f
Add possible action on menu item back. This fixes broken Merge pull request #586 from mkbel/ustep_linearity_2 06d5ec5.
2018-03-29 11:42:44 +02:00
d5636fd023
Merge pull request #585 from PavelSindler/farm_mode_MK3
...
checking if file is complete temporarily not active in farm mode
2018-03-28 19:39:00 +02:00
06d5ec5659
Merge pull request #586 from mkbel/ustep_linearity_2
...
Ustep linearity
2018-03-28 19:38:34 +02:00
ffdd11e960
Merge pull request #587 from XPila/MK3-V3_2
...
Mk3 v3 2
2018-03-28 19:38:20 +02:00
bde097cad1
bugfix - PFW233 - first homing in silent mode Y crash.
2018-03-28 19:22:20 +02:00
9cb036fbcb
Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2
2018-03-28 19:11:02 +02:00
40a064ffbc
Add extruder linearity correction to settings menu.
2018-03-28 18:53:37 +02:00
6e15a77c9b
preheat menu update
2018-03-28 17:50:16 +02:00
95e751dd65
farm mode: preheat menu update
2018-03-28 17:04:46 +02:00
2c3c6c54f3
checking if file is complete temporarily not active in farm mode
2018-03-28 17:00:17 +02:00
8ba83a9789
bugfix - PFW226 - selftest error
2018-03-28 16:13:54 +02:00
678cd17e7b
Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.
2018-03-28 16:13:16 +02:00
cf43b85de9
XYZ calibration - accuracy improvement
2018-03-27 17:27:41 +02:00
57bbb0e17d
Fix wraparound from lowest value to highest value in menu value edit.
2018-03-26 20:25:23 +02:00
397e7d4791
Increase resolution of wave factor.
2018-03-26 15:17:06 +02:00
903dce9716
Merge pull request #576 from PavelSindler/MK3_for_merging
...
stealth mode / silent mode
2018-03-23 20:42:08 +01:00
2ce75293f3
stealth mode / silent mode
2018-03-23 19:49:59 +01:00
5a7e76e02b
Merge pull request #575 from PavelSindler/adc_pins
...
Adc pins, pinda temp table
2018-03-23 19:36:23 +01:00
dc32bd24fc
correction
2018-03-23 18:20:55 +01:00
2d30261976
bed voltage menu hidden
2018-03-23 16:49:06 +01:00
7ad6fb526c
typo removed
2018-03-23 15:53:44 +01:00
78f9f6b611
use defines for adc pins, temp table for PIDNA update
2018-03-16 11:01:06 +01:00
e5faba7226
serial port set back (was previously changed for debugging purposes)
2018-03-15 14:42:03 +01:00
08ec920d33
merge with upstream
2018-03-15 14:25:17 +01:00
3d299cc412
Document.
2018-03-14 21:05:47 +01:00
4bc1671953
version=3.2.0-alpha buildnumber=370 repository=Unknown
2018-03-14 16:33:50 +01:00
67e90b576a
Disabled force selftest
...
XYZ calibration tunning
2018-03-14 16:25:32 +01:00
863fe1f054
show message that printer is not connected to monitoring on printer start
2018-03-14 15:35:39 +01:00
3ff5686336
MK2-25-3 variant files
2018-03-14 13:53:36 +01:00
2f98ac989a
Variant file for MK2 + cond. translation
2018-03-13 23:14:44 +01:00
81cd96b8fe
Variant file for MK25 + cond. translation
2018-03-13 23:02:46 +01:00
c163d8a9f7
Variant file for MK3
2018-03-13 22:40:20 +01:00
46cecb1bdf
deleted unused file
2018-03-13 20:44:06 +01:00
ac1a56b493
Merge branch 'MK25' into MK3
2018-03-13 20:43:19 +01:00
27cc5e51c3
removed duplicit declaration of prusa_statistics function
2018-03-13 19:12:36 +01:00
5d389a2c36
Farm mode: when print finishes, ask which filament was used for print; statistics modified
2018-03-13 19:11:02 +01:00
a3ad74a6be
status screen fix
2018-03-13 19:08:19 +01:00
8ec3c0fd7e
removed "Printer disconnected" message
2018-03-13 18:50:56 +01:00
f45f206faf
sorting files disabled in farm mode, start printer status needs reponse from monitoring
2018-03-13 18:50:11 +01:00
ddeb7b8c84
statistics improved, initial version of function which forces user to connect printer to monitoring
2018-03-13 18:43:42 +01:00
16f9f35451
static_assert replaced with error directive
2018-03-13 16:47:38 +01:00
0c97f46f25
Merge pull request #551 from XPila/MK3-new_xyz_cal
...
New XYZ calibration with image processing
2018-03-13 16:17:50 +01:00
a23ac6db7d
Merge pull request #550 from mkbel/safety_timer_MK3
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:03:45 +01:00
701dc55f4e
Merge pull request #549 from mkbel/safety_timer
...
Safety timer (disable heaters after 15min idle)
2018-03-13 15:02:09 +01:00
f487691070
Merge pull request #536 from mkbel/menu_return
...
Menu return
2018-03-13 14:30:48 +01:00
98e96c9182
Merge pull request #457 from bubnikv/MK3_fast_dbg
...
Mk3 fast dbg
2018-03-13 14:13:29 +01:00
65a91b366d
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
6b08cdeaf1
Safety timer (disable heaters after 15min idle)
2018-03-12 23:45:10 +01:00
262e800db7
Safety timer (disable heaters after 15min idle)
2018-03-12 23:35:50 +01:00
1df91e5656
MK3 Add Gcode to wait for minimum PINDA temp
...
The PINDA temperature compensation is defined for values above 35C. To achieve an optimal first layer consistently it is vital to start the print with a temperature of >= 35C on the pinda probe.
When doing a manual pinda temperature calibration it is necessary to begin homing and mesh bed leveling at an exact temperature. This gcode is perfect for this.
Example startup code:
G28 W ; home all without mesh bed level
G0 Z50 ; raise Z to not heat PINDA before bed is warm
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G0 X50 Y50 Z0.15 ; this is a good PINDA heating position
M666 S35 ; the new code - wait until PINDA is >= 35C
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
See my forum post later for more explaination on my manual temperature calibration procedure. I will link it then.
2018-03-09 20:46:07 +01:00
66dc65ecd4
version changed
2018-03-09 14:15:47 +01:00
d512c9c9c2
version changed
2018-03-08 14:48:01 +01:00
976e5a6a19
Temperature calibration - remove steel
2018-03-07 21:45:55 +01:00
b902d91760
changed version
2018-03-07 21:02:07 +01:00
b41d680adf
Replace problematic character in comment.
2018-03-07 20:58:15 +01:00
8ff028820a
Remove redundant parameter.
2018-03-07 20:55:01 +01:00
abb9aa0a16
not using homing currents in axis selftest
2018-03-07 20:42:15 +01:00
2a53686d2f
Document valid usage of lcd_goto_menu(), remove redundant parameter.
2018-03-07 20:40:59 +01:00
1aba608133
Document valid usage of lcd_goto_menu(), wrap lcd_second_serial_set() by HAS_SECOND_SERIAL_PORT macro.
2018-03-07 18:30:33 +01:00
0c961dedc4
Reset menu stack in lcd_return_to_status().
...
Mark menuStack.reset() as redundant in lcd_status_screen(), but leave it there to be sure.
2018-03-07 18:15:24 +01:00
716098c434
Preserve position in menu move axis Extruder.
2018-03-07 17:27:27 +01:00
PavelSindler
Robert Pelnar
Marek Bel
PavelSindler
MRprusa3d
mkbel
Christoph Stahl